- 10 Nov, 2019 12 commits
-
-
Laura Abbott authored
iio tools fail to build correctly with make parallelization: $ make -s -j24 fixdep: error opening depfile: ./.iio_utils.o.d: No such file or directory make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:96: iio_utils.o] Error 2 make: *** [Makefile:43: iio_event_monitor-in.o] Error 2 make: *** Waiting for unfinished jobs.... This is because iio_utils.o is used across multiple targets. Fix this by making iio_utils.o a proper dependency. Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcelo Schmitt authored
The AD7292 is a 10-bit monitor and control system with ADC, DACs, temperature sensor, and GPIOs. Configure AD7292 devices in direct access mode, enabling single-ended ADC readings. Datasheet: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdfSigned-off-by:
Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by:
-
Marcelo Schmitt authored
Add a devicetree schema for AD7292 monitor and control system. Signed-off-by:
-
Marcus Folkesson authored
Rewrite bindings to use json-schema vocabulary. Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Stephan Gerhold authored
MPU6050 has two power supply pins: VDD and VLOGIC, but the mpu6050 driver only supports enabling one of them at the moment. In some cases, they may need to be enabled separately. Add an additional "vdd-supply" that stays enabled for as long as the driver is loaded. We cannot turn off the VDD regulator during suspend as this would cause register settings (FSR, sampling rate, ...) to be lost. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
-
Stephan Gerhold authored
inv_mpu6050 now supports an additional vdd-supply; document it. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Gwendal Grignou authored
Field was already set for light/proximity and accelerometer/gyroscope/magnetometer sensors. Fixes: ae7b02ad ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs") Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Stefan Popa authored
The AD5600 is a single channel, 16-bit resolution, voltage output digital to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is part of the AD5541 family of DACs. The ad5446 IIO driver implements support for some of these DACs (in the AD5441 family), so the change is a simple entry in this driver. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.pdfSigned-off-by:
Stefan Popa <stefan.popa@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Marcus Folkesson authored
Rewrite bindings to use json-schema vocabulary. Signed-off-by:
-
Rishi Gupta authored
The driver for veml6030 light sensor provides sysfs entries like configuring cutoff for interrupt. This commit document them. Signed-off-by:
Rishi Gupta <gupt21@gmail.com> Signed-off-by:
-
Rishi Gupta authored
This commit adds device tree bindings for veml6030 ambient light sensor. Signed-off-by:
-
Rishi Gupta authored
veml6030 is an ambient light sensor from Vishay semiconductors. It has 16-bit resolution, supports both ambient light measurement and white channel which is more responsive to wider wavelength spectrum. It has flexible power saving, integration time and gain options. Communication with host is over I2C. Signed-off-by:
-
- 09 Nov, 2019 17 commits
-
-
Lorenzo Bianconi authored
Express available frequencies in mHZ in order to support even rational ODRs. This patch is need to fix an Android CTS failure Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Since st_lsm6dsx i2c master controller relies on accel device as trigger and slave devices can run at different ODRs we must select an accel_odr >= slave_odr. Report real accel ODR in st_lsm6dsx_check_odr() in order to properly set sensor frequency in st_lsm6dsx_write_raw and avoid to report unsupported frequency Fixes: 6ffb55e5 ("iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids") Signed-off-by:
-
Lorenzo Bianconi authored
Introduce odr_len in st_lsm6dsx_odr_table_entry data structure in order to explicitly define odr table size and support devices with different odr table map Signed-off-by:
-
Fabrice Gasnier authored
Add new optional dt property to tune analog clock prescaler. Driver looks for optional "st,max-clk-rate-hz", then computes best approximation below that rate, using ADC internal prescaler. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Fabrice Gasnier authored
Add optional dt property to tune maximum desired analog clock rate. Signed-off-by:
-
Jonathan Cameron authored
Reduce local boilerplate. Suggested by coccinelle CHECK drivers/iio/dac/vf610_dac.c drivers/iio/dac/vf610_dac.c:189:1-11: WARNING: Use devm_platform_ioremap_resource for info -> regs Signed-off-by:
-
Jonathan Cameron authored
Reduce boilerplate. Suggested by coccinelle CHECK drivers/iio/dac/lpc18xx_dac.c drivers/iio/dac/lpc18xx_dac.c:121:1-10: WARNING: Use devm_platform_ioremap_resource for dac -> base Signed-off-by:
-
Jonathan Cameron authored
Reduces boilerplate. Suggested by coccinelle CHECK drivers/iio/adc/vf610_adc.c drivers/iio/adc/vf610_adc.c:819:1-11: WARNING: Use devm_platform_ioremap_resource for info -> regs Signed-off-by:
-
Jonathan Cameron authored
Avoids local boilerplate doing the same thing. Suggested by coccinelle CHECK drivers/iio/adc/spear_adc.c drivers/iio/adc/spear_adc.c:283:1-22: WARNING: Use devm_platform_ioremap_resource for st -> adc_base_spear6xx Signed-off-by:
-
Jonathan Cameron authored
Avoids some local boilerplate. Suggested by coccinelle. CHECK drivers/iio/adc/rcar-gyroadc.c drivers/iio/adc/rcar-gyroadc.c:495:1-11: WARNING: Use devm_platform_ioremap_resource for priv -> regs Signed-off-by:
-
Jonathan Cameron authored
Reduces local boilerplate code. Suggested by coccinelle via coccicheck. CHECK drivers/iio/adc/npcm_adc.c drivers/iio/adc/npcm_adc.c:200:1-11: WARNING: Use devm_platform_ioremap_resource for info -> regs Signed-off-by:
-
Jonathan Cameron authored
Avoid local boilerplate. Identified by coccinelle CHECK drivers/iio/adc/lpc18xx_adc.c drivers/iio/adc/lpc18xx_adc.c:137:1-10: WARNING: Use devm_platform_ioremap_resource for adc -> base Signed-off-by:
-
Jonathan Cameron authored
Replaces local boilerplate. Identified by coccinelle. CHECK drivers/iio/adc/ingenic-adc.c drivers/iio/adc/ingenic-adc.c:449:1-10: WARNING: Use devm_platform_ioremap_resource for adc -> base Signed-off-by:
-
Jonathan Cameron authored
Reduces local boilerplate. Found by coccinelle: drivers/iio/adc/cc10001_adc.c:344:1-18: WARNING: Use devm_platform_ioremap_resource for adc_dev -> reg_base Signed-off-by:
-
Jonathan Cameron authored
Found by coccinelle / coccicheck CHECK drivers/iio/adc/bcm_iproc_adc.c drivers/iio/adc/bcm_iproc_adc.c:311:3-4: Unneeded semicolon Signed-off-by:
-
Jonathan Cameron authored
Reduces boilerplate. Identified by coccinelle CHECK drivers/iio/adc/mt6577_auxadc.c drivers/iio/adc/mt6577_auxadc.c:257:1-18: WARNING: Use devm_platform_ioremap_resource for adc_dev -> reg_base Signed-off-by:
-
Jonathan Cameron authored
Reduces boilerplate. Identified by: Coccinelle / coccicheck CHECK drivers/iio/adc/aspeed_adc.c drivers/iio/adc/aspeed_adc.c:189:1-11: WARNING: Use devm_platform_ioremap_resource for data -> base Signed-off-by:
-
- 03 Nov, 2019 10 commits
-
-
Alexandru Ardelean authored
The inline read functions in the ADIS library don't check the return value of the `adis_read_reg()` function and assign the value of `tmp` regardless. Fix this by checking if return value is zero and only then assigning the value of `tmp`. No known case of the callers of this function incorrectly using the value, but best to stop any potential risk here. Not suitable for stable due to no known actual bugs caused by this issue. Fixes: 57a1228a ("iio:imu:adis: Add support for 32bit registers") Signed-off-by:
-
Alexandru Ardelean authored
This was also caught by the `-Wmaybe-uninitialized` warning, which (ironically as-is) it makes quite a lot of sense to do for this. The code that actually calls this function will fail to copy on the uninitialized value. Hence, patch does not need to go into stable. Fixes: 78026a6f ("iio:imu:adis: Add debugfs register access support") Signed-off-by:
-
Alexandru Ardelean authored
This was found only after the whole thing with the inline functions, but the compiler actually found something. The value of the `bias` (in adis16480_get_calibbias()) should only be set if the read operation was successful. No actual known problem occurs as users of this function all ultimately check the return value. Hence probably not stable material. Fixes: 2f3abe6c ("iio:imu: Add support for the ADIS16480 and similar IMUs") Signed-off-by:
-
Alexandru Ardelean authored
This is a typical checkpatch warning. The change just renames the type of the `freq` var to `unsigned int`. Signed-off-by:
-
Alexandru Ardelean authored
This is just a minor indentation/alignment fix for the default case of a switch statement. Signed-off-by:
-
Alexandru Ardelean authored
The ADIS library functions return zero on success, and negative values for error. Positive values aren't returned, but we only care about the success value (which is zero). This change is mostly needed so that the compiler won't make any inferences about some about values being potentially un-initialized. This only triggers after making some functions inline, because the compiler can better follow return paths. Signed-off-by:
-
Alexandru Ardelean authored
The ADIS library functions return zero on success, and negative values for error. Positive values aren't returned, but we only care about the success value (which is zero). This change is mostly needed so that the compiler won't make any inferences about some about values being potentially un-initialized. This only triggers after making some functions inline, because the compiler can better follow return paths. Signed-off-by:
-
Alexandru Ardelean authored
The ADIS library functions return zero on success, and negative values for error. Positive values aren't returned, but we only care about the success value (which is zero). This change is mostly needed so that the compiler won't make any inferences about some about values being potentially un-initialized. This only triggers after making some functions inline, because the compiler can better follow return paths. Signed-off-by:
-
Alexandru Ardelean authored
The ADIS library functions return zero on success, and negative values for error. Positive values aren't returned, but we only care about the success value (which is zero). This change is mostly needed so that the compiler won't make any inferences about some about values being potentially un-initialized. This only triggers after making some functions inline, because the compiler can better follow return paths. Signed-off-by:
-
Alexandru Ardelean authored
The ADIS library functions return zero on success, and negative values for error. Positive values aren't returned, but we only care about the success value (which is zero). This change is mostly needed so that the compiler won't make any inferences about some about values being potentially un-initialized. This only triggers after making some functions inline, because the compiler can better follow return paths. Signed-off-by:
-
- 02 Nov, 2019 1 commit
-
-
Alexandru Ardelean authored
The iio_triggered_buffer_postenable() hook should be called first to attach the poll function and the iio_triggered_buffer_predisable() hook should be called last in the predisable hook. This change updates the driver to attach/detach the poll func in the correct order. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
