- 20 Oct, 2004 40 commits
-
-
Stephen Hemminger authored
In order for network device lifetime stuff to work properly, it is necessary for devices to allocate private data as part of alloc_etherdev. Also, netdev_priv() is improvement over dereferencing netdev->priv Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
Greg Kroah-Hartman <greg@kroah.com>
-
Stephen Hemminger authored
Change other usb network driver to use alloc_etherdev to allocate the private data structure. And use netdev_priv to find it. Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
David Brownell authored
Basic HID driver support for USB suspend/resume. At least one keyboard works OK as a remote wakeup source ... unless you write the sysfs power/state attribute using that USB keyboard, in which case the input subsystem reports an endless stream of newlines! :) Someone still needs to implement some configurable timer to support the "suspend idle mice/keyboards/..." policy for devices that can issue wakeup events. In conjunction with autosuspend policies in hub and HCD (UHCI) code, that could allegedly save 2W of power by enabling the C3 state on Centrino laptops that use USB mice. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Some of the recent changes to change how descriptors are read have managed to confuse one USB keyboard. It recovers OK with a few retries though. Signed-off-by:
-
Romain Liévin authored
I have extended my driver to add support of the embedded USB port provided by some new Texas Instruments' handhelds. Things are the same except for the maximum packet size. Description: add support of the USB port embedded on some new TI handhelds (TI84+ and TI89 Titanium). Thanks, Romain. Signed-off-by:
Romain Lievin <lkml@lievin.net> Signed-off-by:
-
Luiz Capitulino authored
Add module version information for usb/serial/belkin_sa.c. Signed-off-by:
Luiz Capitulino <lcapitulino@conectiva.com.br> Signed-off-by:
-
Luiz Capitulino authored
Add module version information for usb/serial/pl2303.c. Signed-off-by:
-
Luiz Capitulino authored
Add module version information for drivers/usb/serial/cyberjack.c. Signed-off-by:
-
Pete Zaitcev authored
the appended patch is not in yet, what gives? I sent it to Marcelo with an understanding that it would be in Linus tree any day now. It was a couple of months ago. It's not just BKL witchhunt either. I remember that it fixed an oops, although I do not remember the precise scenario by now (it had something to do with a race between ->release and ->disconnect). From: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: -
Robert C. Olse authored
This patch adds recognition/support for the PharosGPS puck, as included with Microsoft's Streets and Trips package. The device has an inline USB-to-serial converter which functions as a PL2303 but with different VENDOR_ID and PRODUCT_ID, and so the PL2303 driver is modified to recognize this additional device. Signed-off by: Robert C. Olsen, III [pl2303@2005dauphin.org] Signed-off-by: -
Philippe Bertin authored
-
Luca Risolia authored
Small W996[87]CF documentation updates. Signed-off-by:Luca Risolia <luca.risolia@studio.unibo.it>
-
Alan Stern authored
A recent patch introduced this reference counting leak. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Matthew Dharm authored
Following the recommendation of James Bottomley (of SCSI fame), this patch changes the queuecommand() routine so that when a command is received for a disconnected device, instead of accepting the command and then ignoring it, we fail the command immediately with DID_NO_CONNECT. This fixes a timeout-abort-oops sequence that would occur when the higher-level drivers (mostly the CD driver) try to queue a SYNCHRONIZE CACHE command during scsi_remove_host(). Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
originally written by Sean Young <sean@mess.org> but with LED additions and cleanups from me. Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://kernel.bkbits.net/davem/net-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Andrew Morton authored
Fix incorrect attempt to doubly-initialise the ethtool ops. Cc: <jgarzik@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Phil Oester authored
The scsihosts boot parameter was removed in 2.5.73, but references to it still exist in docs. Cleanup below. Signed-off-by:
-
Stephen C. Tweedie authored
The orphan list holds inodes that need to be truncated on recovery. In the O_DIRECT case, it's used if we extend the inode --- the truncate on recovery means we'll recover the newly-allocated disk blocks if we crash after the IO starts but before i_size is updated on disk. Now, the orphan list is *also* used to delete inodes that are unlinked but still-open. Those get truncated but also deleted on recovery. The orphan list is held both in memory and on disk. So the rules are that the inode can't be reclaimed while on the orphan list. There are only two cases --- either the inode is actively being written(O_DIRECT) or truncated (in which case the inode is by definition not going to be reused), or it's unlinked but still open (again, non-reclaimable). But in the case where you're truncating or write(O_DIRECT)ing a file that is *ALSO* unlinked, there's a problem --- the final unlink would put the inode on the orphan list, but the write/truncate would try to add/remove it. End result is that the inode disappears from the orphan list while it's still unlinked-but-in-use. That's just a leak-on-crash, it's not going to be detectable in normal use. But it's still a bug, and the way we fix it is for direct-IO and truncate not to do the ext3_orphan_del if the file is unlinked (ie. i_nlink==0). Signed-off-by:
-
William A. Adamson authored
Add the new lock manager callbacks to the documentation Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
-
William A. Adamson authored
Export remove_lease(), an interface to time_out_leases() with an fl_break_time in the past. needed by nfsd Signed-off-by:
-
William A. Adamson authored
Export setlease(), a direct interface to __setlease() used by nfsd Signed-off-by:
-
William A. Adamson authored
Use the inode i_writecount to test for handing out a F_RDLCK lease. Signed-off-by:
-
William A. Adamson authored
nfsd will not have a file descriptor, nor an owner on the filp. nfsd also will not use signals. Seperate the lease processsing coe from fcntl_setlease() into a __setlease() call. Signed-off-by:
-
William A. Adamson authored
Move the f_delown processing from lease_modify() into a new default lock manager fl_release_private callback. Signed-off-by:
-
William A. Adamson authored
Separate the lease initialization code from lease_alloc(). set the default lock manager ops. Signed-off-by:
-
William A. Adamson authored
- Add a lock manager break callback to break_lease() for lock managers to initiate breaking a lease. - Move the break_lease() kill_fasync() call to a default lock manager fl_break callback Signed-off-by:
-
William A. Adamson authored
Add a lock manager release private callback to locks_free_lock() for lock manger lease clean-up. Signed-off-by:
-
William A. Adamson authored
The following patches provide an interface to the lease subsystem in the current VFS locking code. NFSv4 delegations and Samba op-locks share most architecture features. The version 4 NFS server delegation implementation should use leases to co-ordinate behavior between local, Samba, and NFS access. The main design points are - Seperate the fcntl interface from the file_lock FL_LEASE processing in fcntl_setlease, creating __setlease() called by fcntl_setlease() - Add new lock_manager callbacks to enable lease properties to be set, leases to be broken, and leases to be cleaned up: with default callbacks preserving the current fcntl_setlease properties. - Add a new interface, setlease() which also calls __setlease(), and remove_lease() for kernel lease managers (e.g. the v4 NFS server) This patch: Add a lock manager copy lock callback to locks_copy_lock() so that nfsd can set lease properties. Signed-off-by:
-
Jeff Mahoney authored
This patch uses the REISERFS_UNSUPPORTED_OPT flag to denote -o(no)acl, and -o(no)user_xattr as unsupported, but allowable, when support isn't built into the kernel. Signed-off-by:
Jeff Mahoney <jeffm@novell.com> Signed-off-by:
-
Jeff Mahoney authored
This patch adds a REISERFS_UNSUPPORTED_OPT flag to denote when a mount option is allowable, but is unsupported in the running configuration. This allows the potential for the set of mount options to be consistent, regardless of what features the kernel is compiled with. Rather than failing the mount, a warning is issued and the mount succeeds. Signed-off-by:
-
Kenneth W. Chen authored
Config option CONFIG_SCHEDSTATS is currently enabled via arch specific Kconfig.debug. Only x86 and ppc arches has code to turn it on. Why not put it in generic lib/Kconfig.debug so it is done once to enable everyone? Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Signed-off-by:
-
Armin Schindler authored
The file Documentation/isdn/README.eicon is outdated and obsolete in kernel 2.6. This file includes description of the old Eicon ISDN driver in kernel 2.4, which was removed in 2.6. Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
kernel/built-in.o(.text+0x1d42b): In function `crash_create_proc_entry': : undefined reference to `proc_vmcore' Signed-off-by:
-
