- 01 Feb, 2017 39 commits
-
-
Paul Gortmaker authored
In commit: acb04058 ("sched/clock: Fix hotplug crash") the PARISC code gained a call to this function. However the prototype for it is within a CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y #ifdef/#endif. That, combined with this: arch/parisc/Kconfig: select HAVE_UNSTABLE_SCHED_CLOCK if SMP means that PARISC can have it either enabled or disabled, resulting in the following build fail: arch/parisc/kernel/setup.c:180:2: error: implicit declaration of function 'clear_sched_clock_stable' [-Werror=implicit-function-declaration] Add a no-op stub for the non-SMP case to prevent this. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: acb04058 ("sched/clock: Fix hotplug crash") Link: http://lkml.kernel.org/r/20170127173816.22733-1-paul.gortmaker@windriver.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Frederic Weisbecker authored
cputime_t is now only used by two architectures: * powerpc (when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y) * s390 And since the core doesn't use it anymore, we don't need any arch support from the others. So we can remove their stub implementations. A final cleanup would be to provide an efficient pure arch implementation of cputime_to_nsec() for s390 and powerpc and finally remove include/linux/cputime.h . Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-36-git-send-email-fweisbec@gmail.comSigned-off-by:
-
Frederic Weisbecker authored
It's unused now. Signed-off-by:
-
Frederic Weisbecker authored
Since the core doesn't deal with cputime_t anymore, most of these APIs have been left unused. Lets remove these. Signed-off-by:
-
Frederic Weisbecker authored
Since the core doesn't deal with cputime_t anymore, most of these APIs have been left unused. Lets remove these. Signed-off-by:
-
Frederic Weisbecker authored
This way we don't need to deal with cputime_t details from the core code. Signed-off-by:
-
Frederic Weisbecker authored
This nsec based cputime_t implementation isn't used anymore. We can remove it. Signed-off-by:
-
Frederic Weisbecker authored
There is no need anymore for this cputime_t midlayer. Let's use nsec units directly. Signed-off-by:
-
Frederic Weisbecker authored
Initially, nsec based cputime_t implementation belonged to IA64. It got exported later for CONFIG_VIRT_CPU_ACCOUNTING_GEN but now it is again only used by IA64. So let's move it back there. Signed-off-by:
-
Frederic Weisbecker authored
This cputime_t implementation is now unused, we can remove it. Signed-off-by:
-
Frederic Weisbecker authored
Turn the full dynticks cputime clock source to return nsec while keeping its very internals jiffies based for performance reasons. Signed-off-by:
-
Frederic Weisbecker authored
This is the final step toward tick based cputime conversion. Now that the whole cputime accounting engine accounts in nsecs, we can convert the very source of the cputime to account in nsecs. Signed-off-by:
-
Frederic Weisbecker authored
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by:
-
Frederic Weisbecker authored
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by:
-
Frederic Weisbecker authored
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by:
-
Frederic Weisbecker authored
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Now that the whole cputime conversion to nsec units is complete, we can remove the compatibility accessors. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Also convert itimers to use nsec based internal counters. This simplifies it and removes the whole game with error/inc_error which served to deal with cputime_t random granularity. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Also convert posix-cpu-timers to use nsec based internal counters to simplify it. Signed-off-by:
-
Frederic Weisbecker authored
Signed-off-by:
-
Frederic Weisbecker authored
The irqtime is accounted is nsecs and stored in cpu_irq_time.hardirq_time and cpu_irq_time.softirq_time. Once the accumulated amount reaches a new jiffy, this one gets accounted to the kcpustat. This was necessary when kcpustat was stored in cputime_t, which could at worst have jiffies granularity. But now kcpustat is stored in nsecs so this whole discretization game with temporary irqtime storage has become unnecessary. We can now directly account the irqtime to the kcpustat. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Not sure if MISDN stats are ABI but it displays task cputime in cputime_t raw value regardless of what type cputime_t wraps which could be either jiffies, nsecs, usecs, or whatever random time unit. Plus it wrongly assumes that cputime_t is long. Given that this dump is broken anyway, lets just display the nanosec value and stick with that. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by:
-
Frederic Weisbecker authored
Now that most cputime readers use the transition API which return the task cputime in old style cputime_t, we can safely store the cputime in nsecs. This will eventually make cputime statistics less opaque and more granular. Back and forth convertions between cputime_t and nsecs in order to deal with cputime_t random granularity won't be needed anymore. Signed-off-by:
-
Frederic Weisbecker authored
This API returns a task's cputime in cputime_t in order to ease the conversion of cputime internals to use nsecs units instead. Blindly converting all cputime readers to use this API now will later let us convert more smoothly and step by step all these places to use the new nsec based cputime. Signed-off-by:
-
Frederic Weisbecker authored
cputime_t is being obsolete and replaced by nsecs units in order to make internal timestamps less opaque and more granular. Signed-off-by:
-
Frederic Weisbecker authored
cputime_t is going to be removed and replaced by nsecs units, so convert the drivers/macintosh/rack-meter.c use to u64.. Signed-off-by:
-
Frederic Weisbecker authored
Kernel CPU stats are stored in cputime_t which is an architecture defined type, and hence a bit opaque and requiring accessors and mutators for any operation. Converting them to nsecs simplifies the code and is one step toward the removal of cputime_t in the core code. Signed-off-by:
-
Frederic Weisbecker authored
It's a leftover from removed code. Signed-off-by:
-
Frederic Weisbecker authored
This will be needed for the cputime_t to nsec conversion. Signed-off-by:
-
Frederic Weisbecker authored
NSEC_PER_JIFFY is an ad-hoc redefinition of TICK_NSEC. Let's rather use a unique and well maintained version. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "It was reported to me that the thread created by the hwlat tracer does not migrate after the first instance. I found that there was as small bug in the logic, and fixed it. It's minor, but should be fixed regardless. There's not much impact outside the hwlat tracer" * tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix hwlat kthread migration
-
- 31 Jan, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov: "A fix for a crash in the wm97xx driver and synaptics-rmi4 will stop throwing erroneous warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake Input: wm97xx - make missing platform data non-fatal
-
