- 19 Jun, 2019 2 commits
-
-
Chris Wilson authored
The process_csb routine from execlists_submission is incompatible with the GuC backend. Add a warning to detect if we accidentally end up in the wrong spot. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The idea behind keeping the saturation mask local to a context backfired spectacularly. The premise with the local mask was that we would be more proactive in attempting to use semaphores after each time the context idled, and that all new contexts would attempt to use semaphores ignoring the current state of the system. This turns out to be horribly optimistic. If the system state is still oversaturated and the existing workloads have all stopped using semaphores, the new workloads would attempt to use semaphores and be deprioritised behind real work. The new contexts would not switch off using semaphores until their initial batch of low priority work had completed. Given sufficient backload load of equal user priority, this would completely starve the new work of any GPU time. To compensate, remove the local tracking in favour of keeping it as global state on the engine -- once the system is saturated and semaphores are disabled, everyone stops attempting to use semaphores until the system is idle again. One of the reason for preferring local context tracking was that it worked with virtual engines, so for switching to global state we could either do a complete check of all the virtual siblings or simply disable semaphores for those requests. This takes the simpler approach of disabling semaphores on virtual engines. The downside is that the decision that the engine is saturated is a local measure -- we are only checking whether or not this context was scheduled in a timely fashion, it may be legitimately delayed due to user priorities. We still have the same dilemma though, that we do not want to employ the semaphore poll unless it will be used. v2: Explain why we need to assume the worst wrt virtual engines. Fixes: ca6e56f6 ("drm/i915: Disable semaphore busywaits on saturated systems") Signed-off-by:
-
- 18 Jun, 2019 16 commits
-
-
José Roberto de Souza authored
To do frontbuffer tracking we are depending on Display WA #0884 to exit PSR when there is a frontbuffer modification but according to user reports a write to CURSURFLIVE do not cause PSR to exit in older gens so lets force a PSR exit. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110799 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by:
Thomas Rohwer <trohwer85@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190617195154.30292-1-jose.souza@intel.com
-
Chris Wilson authored
This has caught me out on countless occasions, when we retrieve a pointer from the submission/execlists backend, it does not carry a reference to the context or ring. Those are only pinned while the request is active, so if we see the request is already completed, it may be in the process of being retired and those pointers defunct. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110938 Fixes: 3a068721 ("drm/i915: Show ring->start for the ELSP context/request queue") Signed-off-by:
-
Chris Wilson authored
Be sure to cleanup after live_evict by flushing any residual state off the GPU using igt_flush_test. Tvrtko mentioned that it is probably wise to stop repeating this ad hoc around the tests and implement a live test runner. Signed-off-by:
-
Chris Wilson authored
Previously, we wanted to shrink the pages of freed objects before they were finally RCU collected. However, by removing the struct_mutex serialisation around the active reference, we need to acquire an extra reference around the wait. Unfortunately this means that we have to skip objects that are waiting RCU collection. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110937Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-2-chris@chris-wilson.co.uk
-
Robert M. Fosha authored
Updates the live_workarounds selftest to handle whitelisted registers that are flagged as read only. Signed-off-by:
Robert M. Fosha <robert.m.fosha@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
-
John Harrison authored
Updated whitelist table for ICL. v2: Reduce changes to just those required for media driver until the selftest can be updated to support the new features of the other entries. Signed-off-by:
-
John Harrison authored
Newer hardware requires setting up whitelists on engines other than render. So, extend the whitelist code to support all engines. Signed-off-by:
-
John Harrison authored
Newer hardware adds flags to the whitelist work-around register. These allow per access direction privileges and ranges. Signed-off-by:
-
Ville Syrjälä authored
We have full infoframe readout now so we can replace the PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe) with the normal PIPE_CONF_CHECK_BOOL(has_infoframe). Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190612130801.2085-4-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Rename pipe_config_err() to pipe_config_mismatch(), and also print whether we're doing the fastset check or the sw vs. hw state readout check. Should make the logs a bit less confusing when they're not filled with what looks like a real error. Also rename the 'adjust' variable to 'fastset' to make it clear what it means. Signed-off-by:
-
Ville Syrjälä authored
Now that intel_pipe_config_compare() no longer clobbers the passed in state we can make both crtc states const. And while at we simplify the calling convention, and clean up intel_compare_link_m_n() a bit. Signed-off-by:
-
Ville Syrjälä authored
We're now calling intel_pipe_config_compare(..., true) uncoditionally which means we're always going clobber the calculated M/N values with the old values if the fuzzy M/N check passes. That causes problems because the fuzzy check allows for a huge difference in the values. I'm actually tempted to just make the M/N checks exact, but that might prevent fastboot from kicking in when people want it. So for now let's overwrite the computed values with the old values only if decide to skip the modeset. v2: Copy has_drrs along with M/N M2/N2 values Cc: stable@vger.kernel.org Cc: Blubberbub@protonmail.com Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Blubberbub@protonmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110782 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110675 Fixes: d19f958d ("drm/i915: Enable fastset for non-boot modesets.") Signed-off-by:
-
Chris Wilson authored
Since commit 1ba62714 ("drm: Add reservation_object to drm_gem_object"), struct drm_gem_object grew its own builtin reservation_object rendering our own private one bloat. Remove our redundant reservation_object and point into obj->base.resv instead. References: 1ba62714 ("drm: Add reservation_object to drm_gem_object") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618125858.7295-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Though we pin the context first before taking the pm wakeref, during retire we need to unpin before dropping the pm wakeref (breaking the "natural" onion). During the unpin, we may need to attach a cleanup operation on to the engine wakeref, ergo we want to keep the engine awake until after the unpin. v2: Push the engine wakeref into the barrier so we keep the onion unwind ordering in the request itself Fixes: ce476c80 ("drm/i915: Keep contexts pinned until after the next kernel context switch") Signed-off-by:
-
Chris Wilson authored
If the user is clearing the log buffer too slowly, we overflow. As this is an expected condition, and the driver tries to handle it, reduce the error message down to a notice. Michal mentioned that another cause would be incorrect reset handling, so we don't want to lose the notification entirely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110817Signed-off-by:
-
Jani Nikula authored
Fix the plethora of Sphinx build errors after moving the display files under a subdirectory. Fixes: 379bc100 ("drm/i915: move modesetting output/encoder code under display/") Fixes: df0566a6 ("drm/i915: move modesetting core code under display/") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190617102944.25129-1-jani.nikula@intel.com
-
- 17 Jun, 2019 22 commits
-
-
Matt Roper authored
Although EHL introduces a new PCH, the South Display part of the PCH that we care about is nearly identical to ICP, just with some pins remapped. Most notably, Port C is mapped to the pins that ICP uses for TC Port 1. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Chris Wilson authored
Currently, we perform a locked update of the shadow entry when allocating a page directory entry such that if two clients are concurrently allocating neighbouring ranges we only insert one new entry for the pair of them. However, we also need to serialise both clients wrt to the actual entry in the HW table, or else we may allow one client or even a third client to proceed ahead of the HW write. My handwave before was that under the _pathological_ condition we would see the scratch entry instead of the expected entry, causing a temporary glitch. That starvation condition will eventually show up in practice, so fix it. The reason for the previous cheat was to avoid having to free the extra allocation while under the spinlock. Now, we keep the extra entry allocated until the end instead. v2: Fix error paths for gen6 Fixes: 1d1b5490 ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190617140426.7203-1-chris@chris-wilson.co.uk
-
Lucas De Marchi authored
In intel_package_header version 2 there's a new field in the fw_info table that must be 0, otherwise it's not the correct DMC firmware. Add a check for version 2 or later. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-10-lucas.demarchi@intel.com
-
Lucas De Marchi authored
parse_csr_fw() is responsible to set up several fields in struct intel_csr, including the payload. We don't need to assign it again. Signed-off-by:
-
Lucas De Marchi authored
Main difference is that now there are up to 20 MMIOs that can be set and a lot of noise due to the struct changing the fields in the middle. Signed-off-by:
-
Lucas De Marchi authored
Complete the extraction of functions to parse specific parts of the firmware. The return of the function parse_csr_fw() is now redundant since it already sets the dmc_payload field. Changing it is left for later to avoid noise in the commit. Signed-off-by:
-
Lucas De Marchi authored
Like parse_csr_fw_css() this parses the package_header from firmware and saves the relevant fields in the csr struct. In this function we also lookup the fw_info we are interested in. Signed-off-by:
-
Lucas De Marchi authored
Let's start splitting the parse function, making all of them return the number of bytes parsed - different versions of the firmware header may require different sizes for the structures. v2: rework remaining bytes calculation on new protection for amount of bytes read Signed-off-by: -
Lucas De Marchi authored
The only meaninful change is that it supports up to 32 fw_info entries rather than the previous max=20. Signed-off-by:
-
Lucas De Marchi authored
Move fw_info out of struct intel_package_header to allow it to grow more easily in future. To make a cleaner move, let's also extract a function to search the header for the dmc_offset. While reviewing this code I wondered why we continued the search even after finding a suitable firmware. Add a comment to explain we will continue to try to find a more specific firmware version, even if this is not required by the spec. Signed-off-by:
-
Lucas De Marchi authored
Change all fields in intel_package_header and intel_dmc_header whose meaning are 1-byte numbers to use u8. Signed-off-by:
-
Mika Kuoppala authored
Allocate all page directory variants with alloc_pd. As the lvl3 and lvl4 variants differ in manipulation, we need to check for existence of backing phys page before accessing it. v2: use err in returns Signed-off-by:
-
Mika Kuoppala authored
All page directories, excluding last level, are initialized with pointer to next level page directories. Make common function for it. Signed-off-by:
-
Mika Kuoppala authored
We set the page directory entries to point into a page table. There is no gen specifics in here so make it simple and obvious. Signed-off-by:
-
Mika Kuoppala authored
All page directories are identical in function, only the position in the hierarchy differ. Use same base type for directory functionality. v2: cleanup, size always 512, init to null Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
-
Mika Kuoppala authored
We set them to scratch right after allocation so prevent useless zeroing before. v2: atomic_t v3: allow pdp alloc fail Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jani Nikula authored
Now that we have a new subdirectory for display code, continue by moving modesetting core code. display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this is, again, a surprisingly clean operation. v2: - don't move intel_sideband.[ch] (Ville) - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
Shashank Sharma authored
ICL introduces a new gamma correction mode in display engine, called multi-segmented-gamma mode. This mode allows users to program the darker region of the gamma curve with sueprfine precision. An example use case for this is HDR curves (like PQ ST-2084). If we plot a gamma correction curve from value range between 0.0 to 1.0, ICL's multi-segment has 3 different sections: - superfine segment: 9 values, ranges between 0 - 1/(128 * 256) - fine segment: 257 values, ranges between 0 - 1/(128) - corase segment: 257 values, ranges between 0 - 1 This patch: - Changes gamma LUTs size for ICL/GEN11 to 262144 entries (8 * 128 * 256), so that userspace can program with highest precision supported. - Changes default gamma mode (non-legacy) to multi-segmented-gamma mode. - Adds functions to program/detect multi-segment gamma. V2: Addressed review comments from Ville - separate function for superfine and fine segments. - remove enum for segments. - reuse last entry of the LUT as gc_max value. - replace if() ....cond with switch...case in icl_load_luts. - add an entry variable, instead of 'word' V3: Addressed review comments from Ville - extra newline - s/entry/color/ - remove LUT size checks - program ilk_lut_12p4_ldw value before ilk_lut_12p4_udw - Change the comments in description of fine and coarse segments, and try to make more sense. - use 8 * 128 instead of 1024 - add 1 entry in LUT for GCMAX V4: Addressed review comments from Ville - Remove unused macro - missing shift entry in blue - pick correct entry for GCMAX - Added Ville's R-B Note: Tested and confirmed the programming sequence of odd/even registers in the HW. The correct sequence should be: ilk_lut_12p4_udw ilk_lut_12p4_ldw v5: Addressed Ville's review comments and renamed odd/even register helpers to be more consistent with the values. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Shashank Sharma authored
This patch renames function ivb_load_lut_10_max to ivb_load_lut_ext_max. V3: Added Vill'es r-b. Cc: Uma Shankar <uma.shankar@intel.com> Suggested-by:
-
Uma Shankar authored
Add macros to define multi segmented gamma registers V2: Addressed Ville's comments: Add gen-lable before bit definition Addressed Jani's comment - Use REG_GENMASK() and REG_BIT() V3: Addressed Ville's comments: - Put comments at the end of line. - Change the comment at start of ICL multisegmented gamma registers. Added Ville's r-b Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
Currently, data type of gamma_lut_size & degamma_lut_size elements in intel_device_info is u16, which means it can accommodate maximum 64k values. In case of ICL multisegmented gamma, the size of gamma LUT is 256K. This patch changes the data type of both of these elements to u32. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> V4: Added Uma's r-b. Reviewed-by:
-
