- 16 Jun, 2010 19 commits
-
-
Eric W. Biederman authored
In unix_skb_parms store pointers to struct pid and struct cred instead of raw uid, gid, and pid values, then translate the credentials on reception into values that are meaningful in the receiving processes namespaces. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Start capturing not only the userspace pid, uid and gid values of the sending process but also the struct pid and struct cred of the sending process as well. This is in preparation for properly supporting SCM_CREDENTIALS for sockets that have different uid and/or pid namespaces at the different ends. Signed-off-by:
Serge E. Hallyn <serge@hallyn.com> Signed-off-by:
-
Eric W. Biederman authored
scm_send occasionally allocates state in the scm_cookie, so I have modified netlink_sendmsg to guarantee that when scm_send succeeds scm_destory will be called to free that state. Signed-off-by:
Daniel Lezcano <daniel.lezcano@free.fr> Acked-by:
-
Eric W. Biederman authored
Use struct pid and struct cred to store the peer credentials on struct sock. This gives enough information to convert the peer credential information to a value relative to whatever namespace the socket is in at the time. This removes nasty surprises when using SO_PEERCRED on socket connetions where the processes on either side are in different pid and user namespaces. Signed-off-by:
-
Eric W. Biederman authored
To keep the coming code clear and to allow both the sock code and the scm code to share the logic introduce a fuction to translate from struct cred to struct ucred. Signed-off-by:
-
Eric W. Biederman authored
Define what happens when a we view a uid from one user_namespace in another user_namepece. - If the user namespaces are the same no mapping is necessary. - For most cases of difference use overflowuid and overflowgid, the uid and gid currently used for 16bit apis when we have a 32bit uid that does fit in 16bits. Effectively the situation is the same, we want to return a uid or gid that is not assigned to any user. - For the case when we happen to be mapping the uid or gid of the creator of the target user namespace use uid 0 and gid as confusing that user with root is not a problem. Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Signed-off-by:
-
Eric W. Biederman authored
Reorder the fields in scm_cookie so they pack better on 64bit. Signed-off-by:
-
Anirban Chakraborty authored
Changed the driver version number to 5.0.4 Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
-
Anirban Chakraborty authored
The driver was not detecting the presence of NIC partitioning capability of the firmware properly. Now, it checks the eswitch set bit in the FW capabilities register and accordingly sets the driver mode as NPAR capable or not. Signed-off-by:
-
Florian Westphal authored
Discard the ACK if we find options that do not match current sysctl settings. Previously it was possible to create a connection with sack, wscale, etc. enabled even if the feature was disabled via sysctl. Also remove an unneeded call to tcp_sack_reset() in cookie_check_timestamp: Both call sites (cookie_v4_check, cookie_v6_check) zero "struct tcp_options_received", hand it to tcp_parse_options() (which does not change tcp_opt->num_sacks/dsack) and then call cookie_check_timestamp(). Even if num_sacks/dsacks were changed, the structure is allocated on the stack and after cookie_check_timestamp returns only a few selected members are copied to the inet_request_sock. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
Addition of rcu_head to struct inet_peer added 16bytes on 64bit arches. Thats a bit unfortunate, since old size was exactly 64 bytes. This can be solved, using an union between this rcu_head an four fields, that are normally used only when a refcount is taken on inet_peer. rcu_head is used only when refcnt=-1, right before structure freeing. Add a inet_peer_refcheck() function to check this assertion for a while. We can bring back SLAB_HWCACHE_ALIGN qualifier in kmem cache creation. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
David S. Miller authored
Based upon a report by Stephen Rothwell. Signed-off-by: -
Eric Dumazet authored
Followup of commit aa1039e7 (inetpeer: RCU conversion) Unused inet_peer entries have a null refcnt. Using atomic_inc_not_zero() in rcu lookups is not going to work for them, and slow path is taken. Fix this using -1 marker instead of 0 for deleted entries. Signed-off-by:
-
Herbert Xu authored
Now that RCU debugging checks for matching rcu_dereference calls and rcu_read_lock, we need to use the correct primitives or face nasty warnings. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
The version of br_netpoll_send_skb used when netpoll is off is missing a const thus causing a warning. Signed-off-by:
-
Eric Dumazet authored
In old kernels, NET_SKB_PAD was defined to 16. Then commit d6301d3d (net: Increase default NET_SKB_PAD to 32), and commit 18e8c134 (net: Increase NET_SKB_PAD to 64 bytes) increased it to 64. While first patch was governed by network stack needs, second was more driven by performance issues on current hardware. Real intent was to align data on a cache line boundary. So use max(32, L1_CACHE_BYTES) instead of 64, to be more generic. Remove microblaze and powerpc own NET_SKB_PAD definitions. Thanks to Alexander Duyck and David Miller for their comments. Suggested-by:
-
Eric Dumazet authored
Third param (work) is unused, remove it. Remove __inline__ and inline qualifiers. Signed-off-by:
-
Eric Dumazet authored
Instead of doing one atomic operation per frag, we can factorize them. Signed-off-by:
-
Florian Westphal authored
When syncookies are in effect, req->iif is left uninitialized. In case of e.g. link-local addresses the route lookup then fails and no syn-ack is sent. Rearrange things so ->iif is also initialized in the syncookie case. want_cookie can only be true when the isn was zero, thus move the want_cookie check into the "!isn" branch. Cc: Glenn Griffin <ggriffin.kernel@gmail.com> Signed-off-by:
-
- 15 Jun, 2010 21 commits
-
-
Ben Hutchings authored
ndo_get_stats still returns struct net_device_stats *; there is no struct net_device_stats64. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Sonic Zhang authored
SKBs hold onto resources that can't be held indefinitely, such as TCP socket references and netfilter conntrack state. So if a packet is left in TX ring for a long time, there might be a TCP socket that cannot be closed and freed up. Current blackfin EMAC driver always reclaim and free used tx skbs in future transfers. The problem is that future transfer may not come as soon as possible. This patch start a timer after transfer to reclaim and free skb. There is nearly no performance drop with this patch. TX interrupt is not enabled because of a strange behavior of the Blackfin EMAC. If EMAC TX transfer control is turned on, endless TX interrupts are triggered no matter if TX DMA is enabled or not. Since DMA walks down the ring automatically, TX transfer control can't be turned off in the middle. The only way is to disable TX interrupt completely. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Eric Dumazet authored
inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by:
-
Michael Chan authored
Fix the code that handles the error case when cnic_cm_abort() cannot proceed normally. We cannot just set the csk->state and we must go through cnic_ready_to_close() to handle all the conditions. We also add error return code in cnic_cm_abort(). Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
Eddie Wai <waie@broadcom.com> Signed-off-by:
-
Michael Chan authored
Combine RESET_RECEIVED and RESET_COMP logic and fix race condition between these 2 events and cnic_cm_close(). In particular, we need to (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) before we update csk->state. Signed-off-by:
-
Michael Chan authored
Move chip-specific code to the respective chip's ->close_conn() functions for better code organization. Signed-off-by:
-
Michael Chan authored
So that bnx2i can handle the error condition immediately and not have to wait for timeout. Signed-off-by: Michael Chan <mchan@broadcom.com. Signed-off-by:
-
Alexander Duyck authored
This change corrects issues where macvlan was not correctly triggering promiscuous mode on ixgbe due to the filters not being correctly set. It also corrects the fact that VF rar filters were being overwritten when the PF was reset. CC: Shirley Ma <xma@us.ibm.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
-
Changli Gao authored
unify tcp flag macros: TCPHDR_FIN, TCPHDR_SYN, TCPHDR_RST, TCPHDR_PSH, TCPHDR_ACK, TCPHDR_URG, TCPHDR_ECE and TCPHDR_CWR. TCBCB_FLAG_* are replaced with the corresponding TCPHDR_*. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> ---- include/net/tcp.h | 24 ++++++------- net/ipv4/tcp.c | 8 ++-- net/ipv4/tcp_input.c | 2 - net/ipv4/tcp_output.c | 59 ++++++++++++++++----------------- net/netfilter/nf_conntrack_proto_tcp.c | 32 ++++++----------- net/netfilter/xt_TCPMSS.c | 4 -- 6 files changed, 58 insertions(+), 71 deletions(-) Signed-off-by:
-
Jiri Pirko authored
Register net_bridge_port pointer as rx_handler data pointer. As br_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a bridge port. Also rcuized pointers are now correctly dereferenced in br_fdb.c and in netfilter parts. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Jiri Pirko authored
Register macvlan_port pointer as rx_handler data pointer. As macvlan_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a macvlan port. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Jiri Pirko authored
Add possibility to register rx_handler data pointer along with a rx_handler. Signed-off-by:
-
Herbert Xu authored
There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by:
Qianfeng Zhang <frzhang@redhat.com> Signed-off-by:
-
Herbert Xu authored
This patch adds the helper netpoll_tx_running for use within ndo_start_xmit. It returns non-zero if ndo_start_xmit is being invoked by netpoll, and zero otherwise. This is currently implemented by simply looking at the hardirq count. This is because for all non-netpoll uses of ndo_start_xmit, IRQs must be enabled while netpoll always disables IRQs before calling ndo_start_xmit. Signed-off-by:
-
Herbert Xu authored
This patch adds the functions __netpoll_setup/__netpoll_cleanup which is designed to be called recursively through ndo_netpoll_seutp. They must be called with RTNL held, and the caller must initialise np->dev and ensure that it has a valid reference count. Signed-off-by:
-
Herbert Xu authored
This patch adds ndo_netpoll_setup as the initialisation primitive to complement ndo_netpoll_cleanup. Signed-off-by:
-
Herbert Xu authored
As it stands, netpoll_setup and netpoll_cleanup have no locking protection whatsoever. So chaos ensures if two entities try to perform them on the same device. This patch adds RTNL to the equation. The code has been rearranged so that bits that do not need RTNL protection are now moved to the top of netpoll_setup. Signed-off-by:
-
Herbert Xu authored
The use of RCU in netpoll is incorrect in a number of places: 1) The initial setting is lacking a write barrier. 2) The synchronize_rcu is in the wrong place. 3) Read barriers are missing. 4) Some places are even missing rcu_read_lock. 5) npinfo is zeroed after freeing. This patch fixes those issues. As most users are in BH context, this also converts the RCU usage to the BH variant. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Herbert Xu authored
Now that netpoll always zaps npinfo we no longer need to do it in bridge. Signed-off-by:
-
Herbert Xu authored
Since we have to NULL npinfo regardless of whether there is a ndo_netpoll_cleanup, it makes sense to do this unconditionally in netpoll_cleanup rather than having every driver do it by themselves. Signed-off-by:
-
