Add new SanDisk High (>8G) CF cards to the pata_pcmcia driver.
Signed-off-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull documentation updates from Jonathan Corbet:
 "It has been a relatively quiet cycle for documentation, but there's
  still a couple of things of note:

   - Conversion of the NFS documentation to RST

   - A new document on how to help with documentation (and a maintainer
     profile entry too)

  Plus the usual collection of typo fixes, etc"

* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
  docs: filesystems: add overlayfs to index.rst
  docs: usb: remove some broken references
  scripts/find-unused-docs: Fix massive false positives
  docs: nvdimm: use ReST notation for subsection
  zram: correct documentation about sysfs node of huge page writeback
  Documentation: zram: various fixes in zram.rst
  Add a maintainer entry profile for documentation
  Add a document on how to contribute to the documentation
  docs: Keep up with the location of NoUri
  Documentation: Call out example SYM_FUNC_* usage as x86-specific
  Documentation: nfs: fault_injection: convert to ReST
  Documentation: nfs: pnfs-scsi-server: convert to ReST
  Documentation: nfs: convert pnfs-block-server to ReST
  Documentation: nfs: idmapper: convert to ReST
  Documentation: convert nfsd-admin-interfaces to ReST
  Documentation: nfs-rdma: convert to ReST
  Documentation: nfsroot.rst: COSMETIC: refill a paragraph
  Documentation: nfsroot.txt: convert to ReST
  Documentation: convert nfs.txt to ReST
  Documentation: filesystems: convert vfat.txt to RST
  ...

Merge tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest kunit updates from Shuah Khan:
 "This kunit update consists of:

   - Support for building kunit as a module from Alan Maguire

   - AppArmor KUnit tests for policy unpack from Mike Salvatore"

* tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: building kunit as a module breaks allmodconfig
  kunit: update documentation to describe module-based build
  kunit: allow kunit to be loaded as a module
  kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds
  kunit: allow kunit tests to be loaded as a module
  kunit: hide unexported try-catch interface in try-catch-impl.h
  kunit: move string-stream.h to lib/kunit
  apparmor: add AppArmor KUnit tests for policy unpack

Merge tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "This Kselftest update consists of several fixes to framework and
  individual tests.

  In addition, it enables LKDTM tests adding lkdtm target to kselftest
  Makefile"

* tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: fix glob selftest
  selftests: settings: tests can be in subsubdirs
  kselftest: Minimise dependency of get_size on C library interfaces
  selftests/livepatch: Remove unused local variable in set_ftrace_enabled()
  selftests/livepatch: Replace set_dynamic_debug() with setup_config() in README
  selftests/lkdtm: Add tests for LKDTM targets
  selftests: Uninitialized variable in test_cgcore_proc_migration()
  selftests: fix build behaviour on targets' failures

Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Pull y2038 updates from Arnd Bergmann:
 "Core, driver and file system changes

  These are updates to device drivers and file systems that for some
  reason or another were not included in the kernel in the previous
  y2038 series.

  I've gone through all users of time_t again to make sure the kernel is
  in a long-term maintainable state, replacing all remaining references
  to time_t with safe alternatives.

  Some related parts of the series were picked up into the nfsd, xfs,
  alsa and v4l2 trees. A final set of patches in linux-mm removes the
  now unused time_t/timeval/timespec types and helper functions after
  all five branches are merged for linux-5.6, ensuring that no new users
  get merged.

  As a result, linux-5.6, or my backport of the patches to 5.4 [1],
  should be the first release that can serve as a base for a 32-bit
  system designed to run beyond year 2038, with a few remaining caveats:

   - All user space must be compiled with a 64-bit time_t, which will be
     supported in the coming musl-1.2 and glibc-2.32 releases, along
     with installed kernel headers from linux-5.6 or higher.

   - Applications that use the system call interfaces directly need to
     be ported to use the time64 syscalls added in linux-5.1 in place of
     the existing system calls. This impacts most users of futex() and
     seccomp() as well as programming languages that have their own
     runtime environment not based on libc.

   - Applications that use a private copy of kernel uapi header files or
     their contents may need to update to the linux-5.6 version, in
     particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
     linux/elfcore.h, linux/sockios.h, linux/timex.h and
     linux/can/bcm.h.

   - A few remaining interfaces cannot be changed to pass a 64-bit
     time_t in a compatible way, so they must be configured to use
     CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit
     timestamps. Most importantly this impacts all users of 'struct
     input_event'.

   - All y2038 problems that are present on 64-bit machines also apply
     to 32-bit machines. In particular this affects file systems with
     on-disk timestamps using signed 32-bit seconds: ext4 with
     ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs"

[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame

* tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits)
  Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC"
  y2038: sh: remove timeval/timespec usage from headers
  y2038: sparc: remove use of struct timex
  y2038: rename itimerval to __kernel_old_itimerval
  y2038: remove obsolete jiffies conversion functions
  nfs: fscache: use timespec64 in inode auxdata
  nfs: fix timstamp debug prints
  nfs: use time64_t internally
  sunrpc: convert to time64_t for expiry
  drm/etnaviv: avoid deprecated timespec
  drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC
  drm/msm: avoid using 'timespec'
  hfs/hfsplus: use 64-bit inode timestamps
  hostfs: pass 64-bit timestamps to/from user space
  packet: clarify timestamp overflow
  tsacct: add 64-bit btime field
  acct: stop using get_seconds()
  um: ubd: use 64-bit time_t where possible
  xtensa: ISS: avoid struct timeval
  dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD
  ...

Pull printk update from Petr Mladek:
 "Prevent replaying log on all consoles"

* tag 'printk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: fix exclusive_console replaying

Pull erofs updates from Gao Xiang:
 "A regression fix, several cleanups and (maybe) plus an upcoming new
  mount api convert patch as a part of vfs update are considered
  available for this cycle.

  All commits have been in linux-next and tested with no smoke out.

  Summary:

   - fix an out-of-bound read access introduced in v5.3, which could
     rarely cause data corruption

   - various cleanup patches"

* tag 'erofs-for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clean up z_erofs_submit_queue()
  erofs: fold in postsubmit_is_all_bypassed()
  erofs: fix out-of-bound read for shifted uncompressed block
  erofs: remove void tagging/untagging of workgroup pointers
  erofs: remove unused tag argument while registering a workgroup
  erofs: remove unused tag argument while finding a workgroup
  erofs: correct indentation of an assigned structure inside a function

Pull adfs updates from Al Viro:
 "adfs stuff for this cycle"

* 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (42 commits)
  fs/adfs: bigdir: Fix an error code in adfs_fplus_read()
  Documentation: update adfs filesystem documentation
  fs/adfs: mostly divorse inode number from indirect disc address
  fs/adfs: super: add support for E and E+ floppy image formats
  fs/adfs: super: extract filesystem block probe
  fs/adfs: dir: remove debug in adfs_dir_update()
  fs/adfs: super: fix inode dropping
  fs/adfs: bigdir: implement directory update support
  fs/adfs: bigdir: calculate and validate directory checkbyte
  fs/adfs: bigdir: directory validation strengthening
  fs/adfs: bigdir: extract directory validation
  fs/adfs: bigdir: factor out directory entry offset calculation
  fs/adfs: newdir: split out directory commit from update
  fs/adfs: newdir: clean up adfs_f_update()
  fs/adfs: newdir: merge adfs_dir_read() into adfs_f_read()
  fs/adfs: newdir: improve directory validation
  fs/adfs: newdir: factor out directory format validation
  fs/adfs: dir: use pointers to access directory head/tails
  fs/adfs: dir: add more efficient iterate() per-format method
  fs/adfs: dir: switch to iterate_shared method
  ...

Pull openat2 support from Al Viro:
 "This is the openat2() series from Aleksa Sarai.

  I'm afraid that the rest of namei stuff will have to wait - it got
  zero review the last time I'd posted #work.namei, and there had been a
  leak in the posted series I'd caught only last weekend. I was going to
  repost it on Monday, but the window opened and the odds of getting any
  review during that... Oh, well.

  Anyway, openat2 part should be ready; that _did_ get sane amount of
  review and public testing, so here it comes"

From Aleksa's description of the series:
 "For a very long time, extending openat(2) with new features has been
  incredibly frustrating. This stems from the fact that openat(2) is
  possibly the most famous counter-example to the mantra "don't silently
  accept garbage from userspace" -- it doesn't check whether unknown
  flags are present[1].

  This means that (generally) the addition of new flags to openat(2) has
  been fraught with backwards-compatibility issues (O_TMPFILE has to be
  defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
  kernels gave errors, since it's insecure to silently ignore the
  flag[2]). All new security-related flags therefore have a tough road
  to being added to openat(2).

  Furthermore, the need for some sort of control over VFS's path
  resolution (to avoid malicious paths resulting in inadvertent
  breakouts) has been a very long-standing desire of many userspace
  applications.

  This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset
  (which was a variant of David Drysdale's O_BENEATH patchset[4] which
  was a spin-off of the Capsicum project[5]) with a few additions and
  changes made based on the previous discussion within [6] as well as
  others I felt were useful.

  In line with the conclusions of the original discussion of
  AT_NO_JUMPS, the flag has been split up into separate flags. However,
  instead of being an openat(2) flag it is provided through a new
  syscall openat2(2) which provides several other improvements to the
  openat(2) interface (see the patch description for more details). The
  following new LOOKUP_* flags are added:

  LOOKUP_NO_XDEV:

     Blocks all mountpoint crossings (upwards, downwards, or through
     absolute links). Absolute pathnames alone in openat(2) do not
     trigger this. Magic-link traversal which implies a vfsmount jump is
     also blocked (though magic-link jumps on the same vfsmount are
     permitted).

  LOOKUP_NO_MAGICLINKS:

     Blocks resolution through /proc/$pid/fd-style links. This is done
     by blocking the usage of nd_jump_link() during resolution in a
     filesystem. The term "magic-links" is used to match with the only
     reference to these links in Documentation/, but I'm happy to change
     the name.

     It should be noted that this is different to the scope of
     ~LOOKUP_FOLLOW in that it applies to all path components. However,
     you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it
     will *not* fail (assuming that no parent component was a
     magic-link), and you will have an fd for the magic-link.

     In order to correctly detect magic-links, the introduction of a new
     LOOKUP_MAGICLINK_JUMPED state flag was required.

  LOOKUP_BENEATH:

     Disallows escapes to outside the starting dirfd's
     tree, using techniques such as ".." or absolute links. Absolute
     paths in openat(2) are also disallowed.

     Conceptually this flag is to ensure you "stay below" a certain
     point in the filesystem tree -- but this requires some additional
     to protect against various races that would allow escape using
     "..".

     Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it
     can trivially beam you around the filesystem (breaking the
     protection). In future, there might be similar safety checks done
     as in LOOKUP_IN_ROOT, but that requires more discussion.

  In addition, two new flags are added that expand on the above ideas:

  LOOKUP_NO_SYMLINKS:

     Does what it says on the tin. No symlink resolution is allowed at
     all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this
     can still be used with NOFOLLOW to open an fd for the symlink as
     long as no parent path had a symlink component.

  LOOKUP_IN_ROOT:

     This is an extension of LOOKUP_BENEATH that, rather than blocking
     attempts to move past the root, forces all such movements to be
     scoped to the starting point. This provides chroot(2)-like
     protection but without the cost of a chroot(2) for each filesystem
     operation, as well as being safe against race attacks that
     chroot(2) is not.

     If a race is detected (as with LOOKUP_BENEATH) then an error is
     generated, and similar to LOOKUP_BENEATH it is not permitted to
     cross magic-links with LOOKUP_IN_ROOT.

     The primary need for this is from container runtimes, which
     currently need to do symlink scoping in userspace[7] when opening
     paths in a potentially malicious container.

     There is a long list of CVEs that could have bene mitigated by
     having RESOLVE_THIS_ROOT (such as CVE-2017-1002101,
     CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a
     few).

  In order to make all of the above more usable, I'm working on
  libpathrs[8] which is a C-friendly library for safe path resolution.
  It features a userspace-emulated backend if the kernel doesn't support
  openat2(2). Hopefully we can get userspace to switch to using it, and
  thus get openat2(2) support for free once it's ready.

  Future work would include implementing things like
  RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow
  programs to be sure they don't hit DoSes though stale NFS handles)"

* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Documentation: path-lookup: include new LOOKUP flags
  selftests: add openat2(2) selftests
  open: introduce openat2(2) syscall
  namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
  namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
  namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
  namei: LOOKUP_NO_XDEV: block mountpoint crossing
  namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
  namei: LOOKUP_NO_SYMLINKS: block symlink resolution
  namei: allow set_root() to produce errors
  namei: allow nd_jump_link() to produce errors
  nsfs: clean-up ns_get_path() signature to return int
  namei: only return -ECHILD from follow_dotdot_rcu()

Pull RCU warning removal from Paul McKenney:
 "A single commit that fixes an embarrassing bug discussed here:

      https://lore.kernel.org/lkml/20200125131425.GB16136@zn.tnic/

  which apparently also affects smaller systems"

[ This was sent to Ingo, but since I see the issue on the laptop I use for
  testing during the merge window, I'm doing the pull directly     - Linus ]

* 'urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Forgive slow expedited grace periods at boot time

Pull core fixes from Ingo Molnar:
 "Three objtool fixes, plus marking SFI as obsolete"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Skip samples subdirectory
  objtool: Fix ARCH=x86_64 build error
  objtool: Silence build output
  MAINTAINERS: Mark simple firmware interface (SFI) obsolete

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc/whatever driver changes for 5.6-rc1

  Included in here are loads of things from a variety of different
  driver subsystems:
   - soundwire updates
   - binder updates
   - nvmem updates
   - firmware drivers updates
   - extcon driver updates
   - various misc driver updates
   - fpga driver updates
   - interconnect subsystem and driver updates
   - bus driver updates
   - uio driver updates
   - mei driver updates
   - w1 driver cleanups
   - various other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits)
  mei: me: add jasper point DID
  char: hpet: Use flexible-array member
  binder: fix log spam for existing debugfs file creation.
  mei: me: add comet point (lake) H device ids
  nvmem: add QTI SDAM driver
  dt-bindings: nvmem: add binding for QTI SPMI SDAM
  dt-bindings: imx-ocotp: Add i.MX8MP compatible
  dt-bindings: soundwire: fix example
  soundwire: cadence: fix kernel-doc parameter descriptions
  soundwire: intel: report slave_ids for each link to SOF driver
  siox: Use the correct style for SPDX License Identifier
  w1: omap-hdq: Simplify driver with PM runtime autosuspend
  firmware: stratix10-svc: Remove unneeded semicolon
  firmware: google: Probe for a GSMI handler in firmware
  firmware: google: Unregister driver_info on failure and exit in gsmi
  firmware: google: Release devices before unregistering the bus
  slimbus: qcom: add missed clk_disable_unprepare in remove
  slimbus: Use the correct style for SPDX License Identifier
  slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel()
  dt-bindings: SLIMBus: add slim devices optional properties
  ...

Pull driver core updates from Greg KH:
 "Here is a small set of changes for 5.6-rc1 for the driver core and
  some firmware subsystem changes.

  Included in here are:
   - device.h splitup like you asked for months ago
   - devtmpfs minor cleanups
   - firmware core minor changes
   - debugfs fix for lockdown mode
   - kernfs cleanup fix
   - cpu topology minor fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (22 commits)
  firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  devtmpfs: factor out common tail of devtmpfs_{create,delete}_node
  devtmpfs: initify a bit
  devtmpfs: simplify initialization of mount_dev
  devtmpfs: factor out setup part of devtmpfsd()
  devtmpfs: fix theoretical stale pointer deref in devtmpfsd()
  driver core: platform: fix u32 greater or equal to zero comparison
  cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree
  debugfs: Return -EPERM when locked down
  driver core: Print device when resources present in really_probe()
  driver core: Fix test_async_driver_probe if NUMA is disabled
  driver core: platform: Prevent resouce overflow from causing infinite loops
  fs/kernfs/dir.c: Clean code by removing always true condition
  component: do not dereference opaque pointer in debugfs
  drivers/component: remove modular code
  debugfs: Fix warnings when building documentation
  device.h: move 'struct driver' stuff out to device/driver.h
  device.h: move 'struct class' stuff out to device/class.h
  device.h: move 'struct bus' stuff out to device/bus.h
  device.h: move dev_printk()-like functions to dev_printk.h
  ...

Pull staging and IIO updates from Greg KH:
 "Here is the big staging/iio driver patches for 5.6-rc1

  Included in here are:

   - lots of new IIO drivers and updates for that subsystem

   - the usual huge quantity of minor cleanups for staging drivers

   - removal of the following staging drivers:
       - isdn/avm
       - isdn/gigaset
       - isdn/hysdn
       - octeon-usb
       - octeon ethernet

  Overall we deleted far more lines than we added, removing over 40k of
  old and obsolete driver code.

  All of these changes have been in linux-next for a while with no
  reported issues"

* tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits)
  staging: most: usb: check for NULL device
  staging: next: configfs: fix release link
  staging: most: core: fix logging messages
  staging: most: core: remove container struct
  staging: most: remove struct device core driver
  staging: most: core: drop device reference
  staging: most: remove device from interface structure
  staging: comedi: drivers: fix spelling mistake "to" -> "too"
  staging: exfat: remove fs_func struct.
  staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq()
  staging: wilc1000: return zero on success and non-zero on function failure
  staging: axis-fifo: replace spinlock with mutex
  staging: wilc1000: remove unused code prior to throughput enhancement in SPI
  staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name
  staging: wilc1000: move firmware API struct's to separate header file
  staging: wilc1000: remove use of infinite loop conditions
  staging: kpc2000: rename variables with kpc namespace
  staging: vt6656: Remove memory buffer from vnt_download_firmware.
  staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED.
  staging: vt6656: Use vnt_rx_tail struct for tail variables.
  ...

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver updates for 5.6-rc1

  Included in here are:
   - dummy_con cleanups (touches lots of arch code)
   - sysrq logic cleanups (touches lots of serial drivers)
   - samsung driver fixes (wasn't really being built)
   - conmakeshash move to tty subdir out of scripts
   - lots of small tty/serial driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
  tty: n_hdlc: Use flexible-array member and struct_size() helper
  tty: baudrate: SPARC supports few more baud rates
  tty: baudrate: Synchronise baud_table[] and baud_bits[]
  tty: serial: meson_uart: Add support for kernel debugger
  serial: imx: fix a race condition in receive path
  serial: 8250_bcm2835aux: Document struct bcm2835aux_data
  serial: 8250_bcm2835aux: Use generic remapping code
  serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
  serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
  serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
  serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
  serial_core: Remove unused member in uart_port
  vt: Correct comment documenting do_take_over_console()
  vt: Delete comment referencing non-existent unbind_con_driver()
  arch/xtensa/setup: Drop dummy_con initialization
  arch/x86/setup: Drop dummy_con initialization
  arch/unicore32/setup: Drop dummy_con initialization
  arch/sparc/setup: Drop dummy_con initialization
  arch/sh/setup: Drop dummy_con initialization
  arch/s390/setup: Drop dummy_con initialization
  ...

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes, nothing too exciting about
  this.

  Some changes hit arch/sh and arch/arm but are well isolated and
  acknowledged by the respective arch maintainers.

  Core changes:

   - Dropped the chained IRQ setup callback into GPIOLIB as we got rid
     of the last users of that in this changeset.

  New drivers:

   - New driver for Ingenic X1830.

   - New driver for Freescale i.MX8MP.

  Driver enhancements:

   - Fix all remaining Intel drivers to pass their IRQ chips along with
     the GPIO chips.

   - Intel Baytrail allocates its irqchip dynamically.

   - Intel Lynxpoint is thoroughly rewritten and modernized.

   - Aspeed AST2600 pin muxing and configuration is much improved.

   - Qualcomm SC7180 functions are updated and wakeup interrupt map is
     provided.

   - A whole slew of Renesas SH-PFC cleanups and improvements.

   - Fix up the Intel DT bindings to use the generic YAML DT bindings
     schema (a first user of this)"

* tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: madera: Remove extra blank line
  pinctrl: qcom: Don't lock around irq_set_irq_wake()
  pinctrl: mvebu: armada-37xx: use use platform api
  gpio: Drop the chained IRQ handler assign function
  pinctrl: freescale: Add i.MX8MP pinctrl driver support
  dt-bindings: imx: Add pinctrl binding doc for i.MX8MP
  pinctrl: tigerlake: Tiger Lake uses _HID enumeration
  pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID
  pinctrl: iproc: Use platform_get_irq_optional() to avoid error message
  pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema
  pinctrl: intel: Pass irqchip when adding gpiochip
  pinctrl: intel: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
  pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
  pinctrl: sunrisepoint: Add missing Interrupt Status register offset
  pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
  pinctrl: artpec6: fix __iomem on reg in set
  pinctrl: ingenic: Use devm_platform_ioremap_resource()
  pinctrl: ingenic: Factorize irq_set_type function
  pinctrl: ingenic: Remove duplicated ingenic_chip_info structures
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.6 kernel cycle.

  This is a pretty calm cycle so far, nothing special going on really.
  Some more changes will come in from the irqchip and pin control trees.

  I also deleted an orphan include file for FMC that was dangling since
  subsystem was removed.

  Core changes:

   - Document the usecases for the kernelspace vs userspace handling of
     GPIOs.

   - Handle MSI (message signalled interrupts) properly in the core
     hierarchical irqdomain code.

   - Fix a rare race condition while initializing the descriptor array.

  New drivers:

   - Xylon LogiCVC GPIO driver.

   - WDC934x GPIO controller driver.

  Driver improvements:

   - Implemented suspend/resume in the Tegra driver.

   - MPC8xx edge detection fixup.

   - Properly convert ThunderX to use hierarchical irqdomain with
     GPIOLIB_IRQCHIP on top of the revert of the previous buggy
     switchover. This time it works (hopefully).

  Misc:

   - Drop a FMC remnant file <linux/ipmi-fru.h>

   - A slew of fixes"

* tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits)
  MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer
  gpiolib: hold gpio devices lock until ->descs array is initialised
  gpio: aspeed-sgpio: fixed typos
  gpio: mvebu: clear irq in edge cause register before unmask edge irq
  gpiolib: Lower verbosity when allocating hierarchy irq
  gpiolib: Remove duplicated function gpio_do_set_config()
  gpio: Fix the no return statement warning
  gpio: wcd934x: Add support to wcd934x gpio controller
  gpiolib: remove set but not used variable 'config'
  gpio: vx855: fixed a typo
  gpio: mockup: sort headers alphabetically
  gpio: mockup: update the license tag
  gpio: Remove the unused flags
  gpiolib: Set lockdep class for hierarchical irq domains
  gpio: thunderx: Switch to GPIOLIB_IRQCHIP
  gpiolib: Add the support for the msi parent domain
  gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg
  gpio: Add use guidance documentation
  dt-bindings: gpio: wcd934x: Add bindings for gpio
  gpio: altera: change to platform_get_irq_optional to avoid false-positive error
  ...

Pull security subsystem update from James Morris:
 "Just one minor fix this time"

* 'for-v5.6' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: remove EARLY_LSM_COUNT which never used

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull IMA updates from Mimi Zohar:
 "Two new features - measuring certificates and querying IMA for a file
  hash - and three bug fixes:

   - Measuring certificates is like the rest of IMA, based on policy,
     but requires loading a custom policy. Certificates loaded onto a
     keyring, for example during early boot, before a custom policy has
     been loaded, are queued and only processed after loading the custom
     policy.

   - IMA calculates and caches files hashes. Other kernel subsystems,
     and possibly kernel modules, are interested in accessing these
     cached file hashes.

  The bug fixes prevent classifying a file short read (e.g. shutdown) as
  an invalid file signature, add a missing blank when displaying the
  securityfs policy rules containing LSM labels, and, lastly, fix the
  handling of the IMA policy information for unknown LSM labels"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  IMA: Defined delayed workqueue to free the queued keys
  IMA: Call workqueue functions to measure queued keys
  IMA: Define workqueue for early boot key measurements
  IMA: pre-allocate buffer to hold keyrings string
  ima: ima/lsm policy rule loading logic bug fixes
  ima: add the ability to query the cached hash of a given file
  ima: Add a space after printing LSM rules for readability
  IMA: fix measuring asymmetric keys Kconfig
  IMA: Read keyrings= option from the IMA policy
  IMA: Add support to limit measuring keys
  KEYS: Call the IMA hook to measure keys
  IMA: Define an IMA hook to measure keys
  IMA: Add KEY_CHECK func to measure keys
  IMA: Check IMA policy flag
  ima: avoid appraise error for hash calc interrupt

Pull tomoyo update from Tetsuo Handa:
 "One 'int' -> 'atomic_t' conversion patch to suppress KCSAN's warning"

* tag 'tomoyo-pr-20200128' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: Use atomic_t for statistics counter

Pull s390 updates from Vasily Gorbik:

 - Add clang 10 build support.

 - Fix BUG() implementation to contain precise bug address, which is
   relevant for kprobes.

 - Make ftraced function appear in a stacktrace.

 - Minor perf improvements and refactoring.

 - Possible deadlock and recovery fixes in pci code.

* tag 's390-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix __EMIT_BUG() macro
  s390/ftrace: generate traced function stack frame
  s390: adjust -mpacked-stack support check for clang 10
  s390/jump_label: use "i" constraint for clang
  s390/cpum_sf: Use DIV_ROUND_UP
  s390/cpum_sf: Use kzalloc and minor changes
  s390/cpum_sf: Convert debug trace to common layout
  s390/pci: Fix possible deadlock in recover_store()
  s390/pci: Recover handle in clp_set_pci_fn()

Pull UML updates from Anton Ivanov:
 "I am sending this on behalf of Richard who is traveling.

  This contains the following changes for UML:

   - Fix for time travel mode

   - Disable CONFIG_CONSTRUCTORS again

   - A new command line option to have an non-raw serial line

   - Preparations to remove obsolete UML network drivers"

* tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix time-travel=inf-cpu with xor/raid6
  Revert "um: Enable CONFIG_CONSTRUCTORS"
  um: Mark non-vector net transports as obsolete
  um: Add an option to make serial driver non-raw

Pull tracing fix from Steven Rostedt:
 "Kprobe events added 'ustring' to distinguish reading strings from
  kernel space or user space.

  But the creating of the event format file only checks for 'string' to
  display string formats. 'ustring' must also be handled"

* tag 'trace-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Have uname use __get_str() in print_fmt

Pull thermal updates from Daniel Lezcano:

 - Depromote debug print on the db8500 platform (Linus Walleij)

 - Fix compilation warning when compiling with make W=1 (Amit Kucheria)

 - Code cleanup and refactoring, regmap conversion and add hwmon support
   on Qoriq (Andrey Smirnov)

 - Add an idle injection cpu cooling device and its documentation,
   rename the cpu_cooling device to cpufreq_cooling device (Daniel
   Lezcano)

 - Convert unexported functions to static, add the __init annotation in
   the thermal-of code and remove the pointless wrapper functions
   (Daniel Lezcano)

 - Fix register offset for Armada XP and register reset bit
   initialization (Zak Hays)

 - Enable hwmon on the rockchip (Stefan Schaeckeler)

 - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform
   and their device tree bindings, followed by a fix for the ths number
   and the sparse warnings (Yangtao Li)

 - Code cleansup for the sun8i and hwmon support (Yangtao Li)

 - Silent some messages which are misleading given the changes made in
   the previous version on generic-adc (Martin Blumenstingl)

 - Rename exynos to Exynos (Krzysztof Kozlowski)

 - Add the bcm2711 thermal driver with the device tree bindings (Stefan
   Wahren)

 - Use usleep_range() instead of udelay() as the call is always done in
   a sleep-able context (Geert Uytterhoeven)

 - Do code cleanup and re-organization to set the scene for a new
   process for the brcmstb (Florian Fainelli)

 - Fix bindings check issues on brcm (Stefan Wahren)

 - Add Jasper Lake support on int340x (Nivedita Swaminathan)

 - Add Comet Lake support on intel pch (Gayatri Kammela)

 - Fix unmatched pci_release_region() on x86 (Chuhong Yuan)

 - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund)

 - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is
   called with the of-node is missing (Peter Mamonov)

 - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal
   Paillet)

* tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits)
  thermal: stm32: Fix low threshold interrupt flood
  thermal: stm32: Improve temperature computing
  thermal: stm32: Handle multiple trip points
  thermal: stm32: Disable interrupts at probe
  thermal: stm32: Rework sensor mode management
  thermal: stm32: Fix icifr register name
  thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing
  thermal: rcar_gen3_thermal: Remove temperature bound
  thermal: rcar_thermal: Remove temperature bound
  thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support
  thermal: intel: Fix unmatched pci_release_region
  thermal: int340x: processor_thermal: Add Jasper Lake support
  dt-bindings: brcm,avs-ro-thermal: Fix binding check issues
  thermal: brcmstb_thermal: Register different ops per process
  thermal: brcmstb_thermal: Restructure interrupt registration
  thermal: brcmstb_thermal: Add 16nm process thermal parameters
  dt-bindings: thermal: Define BCM7216 thermal sensor compatible
  thermal: brcmstb_thermal: Prepare to support a different process
  thermal: brcmstb_thermal: Do not use DT coefficients
  thermal: rcar_thermal: Use usleep_range() instead of udelay()
  ...

Pull sound updates from Takashi Iwai:
 "As the diffstat shows we've had again a lot of works done for this
  cycle: the majority of changes are the continued componentization and
  code refactoring in ASoC, the tree-wide PCM API updates and cleanups
  and SOF updates while a few ASoC driver updates are seen, too.

  Here we go, some highlights:

  Core:
   - Finally y2038 support landed to ALSA ABI; some ioctls have been
     extended and lots of tricks were applied
   - Applying the new managed PCM buffer API to all drivers; the API
     itself was already merged in 5.5
   - The already deprecated dimension support in ALSA control API is
     dropped completely now
   - Verification of ALSA control elements to catch API misuses

  ASoC:
   - Further code refactorings and moving things to the component level
   - Lots of updates and improvements on SOF / Intel drivers; now
     including common HDMI driver and SoundWire support
   - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
     WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011,
     RT1015 and RT1308

  HD-audio:
   - Improved ring-buffer communications using waitqueue
   - Drop the superfluous buffer preallocation on x86

  Others:
   - Many code cleanups, mostly constifications over the whole tree
   - USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix
   - FireWire: code refactoring for oxfw and dice drivers"

* tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits)
  ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82
  ALSA: hda: Add Clevo W65_67SB the power_save blacklist
  ASoC: soc-core: remove null_snd_soc_ops
  ASoC: soc-pcm: add soc_rtd_trigger()
  ASoC: soc-pcm: add soc_rtd_hw_free()
  ASoC: soc-pcm: add soc_rtd_hw_params()
  ASoC: soc-pcm: add soc_rtd_prepare()
  ASoC: soc-pcm: add soc_rtd_shutdown()
  ASoC: soc-pcm: add soc_rtd_startup()
  ASoC: rt1015: add rt1015 amplifier driver
  ASoC: madera: Correct some kernel doc
  ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order
  ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug
  ASoC: madera: Correct DMIC only input hook ups
  ALSA: cs46xx: fix spelling mistake "to" -> "too"
  ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
  ASoC: Add MediaTek MT6660 Speaker Amp Driver
  ASoC: dt-bindings: rt5645: add suppliers
  ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()
  ASoC: dapm: add snd_soc_dapm_put_enum_double_locked
  ...

Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Removed CRYPTO_TFM_RES flags
   - Extended spawn grabbing to all algorithm types
   - Moved hash descsize verification into API code

  Algorithms:
   - Fixed recursive pcrypt dead-lock
   - Added new 32 and 64-bit generic versions of poly1305
   - Added cryptogams implementation of x86/poly1305

  Drivers:
   - Added support for i.MX8M Mini in caam
   - Added support for i.MX8M Nano in caam
   - Added support for i.MX8M Plus in caam
   - Added support for A33 variant of SS in sun4i-ss
   - Added TEE support for Raven Ridge in ccp
   - Added in-kernel API to submit TEE commands in ccp
   - Added AMD-TEE driver
   - Added support for BCM2711 in iproc-rng200
   - Added support for AES256-GCM based ciphers for chtls
   - Added aead support on SEC2 in hisilicon"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
  crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
  crypto: caam - add support for i.MX8M Plus
  crypto: x86/poly1305 - emit does base conversion itself
  crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
  crypto: chacha20poly1305 - add back missing test vectors and test chunking
  crypto: x86/poly1305 - fix .gitignore typo
  tee: fix memory allocation failure checks on drv_data and amdtee
  crypto: ccree - erase unneeded inline funcs
  crypto: ccree - make cc_pm_put_suspend() void
  crypto: ccree - split overloaded usage of irq field
  crypto: ccree - fix PM race condition
  crypto: ccree - fix FDE descriptor sequence
  crypto: ccree - cc_do_send_request() is void func
  crypto: ccree - fix pm wrongful error reporting
  crypto: ccree - turn errors to debug msgs
  crypto: ccree - fix AEAD decrypt auth fail
  crypto: ccree - fix typo in comment
  crypto: ccree - fix typos in error msgs
  crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
  crypto: x86/sha - Eliminate casts on asm implementations
  ...

Pull cifs updates from Steve French:
 "Various SMB3/CIFS fixes including four for stable.

   - Improvement to fallocate (enables 3 additional xfstests)

   - Fix for file creation when mounting with modefromsid

   - Add ability to backup/restore dos attributes and creation time

   - DFS failover and reconnect fixes

   - performance optimization for readir

  Note that due to the upcoming SMB3 Test Event (at SNIA SDC next week)
  there will likely be more changesets near the end of the merge window
  (since we will be testing heavily next week, I held off on some
  patches and I expect some additional multichannel patches as well as
  patches to enable some additional xfstests)"

* tag '5.6-smb3-fixes-and-dfs-and-readdir-improvements' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
  CIFS: Fix task struct use-after-free on reconnect
  cifs: use PTR_ERR_OR_ZERO() to simplify code
  cifs: add support for fallocate mode 0 for non-sparse files
  cifs: fix NULL dereference in match_prepath
  smb3: fix default permissions on new files when mounting with modefromsid
  CIFS: Add support for setting owner info, dos attributes, and create time
  cifs: remove set but not used variable 'server'
  cifs: Fix memory allocation in __smb2_handle_cancelled_cmd()
  cifs: Fix mount options set in automount
  cifs: fix unitialized variable poential problem with network I/O cache lock patch
  cifs: Fix return value in __update_cache_entry
  cifs: Avoid doing network I/O while holding cache lock
  cifs: Fix potential deadlock when updating vol in cifs_reconnect()
  cifs: Merge is_path_valid() into get_normalized_path()
  cifs: Introduce helpers for finding TCP connection
  cifs: Get rid of kstrdup_const()'d paths
  cifs: Clean up DFS referral cache
  cifs: Don't use iov_iter::type directly
  cifs: set correct max-buffer-size for smb2_ioctl_init()
  cifs: use compounding for open and first query-dir for readdir()
  ...

Pull fsverity updates from Eric Biggers:

 - Optimize fs-verity sequential read performance by implementing
   readahead of Merkle tree pages. This allows the Merkle tree to be
   read in larger chunks.

 - Optimize FS_IOC_ENABLE_VERITY performance in the uncached case by
   implementing readahead of data pages.

 - Allocate the hash requests from a mempool in order to eliminate the
   possibility of allocation failures during I/O.

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: use u64_to_user_ptr()
  fs-verity: use mempool for hash requests
  fs-verity: implement readahead of Merkle tree pages
  fs-verity: implement readahead for FS_IOC_ENABLE_VERITY

Pull fscrypt updates from Eric Biggers:

 - Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
   provided via a keyring key.

 - Prepare for the new dirhash method (SipHash of plaintext name) that
   will be used by directories that are both encrypted and casefolded.

 - Switch to a new format for "no-key names" that prepares for the new
   dirhash method, and also fixes a longstanding bug where multiple
   filenames could map to the same no-key name.

 - Allow the crypto algorithms used by fscrypt to be built as loadable
   modules when the fscrypt-capable filesystems are.

 - Optimize fscrypt_zeroout_range().

 - Various cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (26 commits)
  fscrypt: improve format of no-key names
  ubifs: allow both hash and disk name to be provided in no-key names
  ubifs: don't trigger assertion on invalid no-key filename
  fscrypt: clarify what is meant by a per-file key
  fscrypt: derive dirhash key for casefolded directories
  fscrypt: don't allow v1 policies with casefolding
  fscrypt: add "fscrypt_" prefix to fname_encrypt()
  fscrypt: don't print name of busy file when removing key
  ubifs: use IS_ENCRYPTED() instead of ubifs_crypt_is_encrypted()
  fscrypt: document gfp_flags for bounce page allocation
  fscrypt: optimize fscrypt_zeroout_range()
  fscrypt: remove redundant bi_status check
  fscrypt: Allow modular crypto algorithms
  fscrypt: include <linux/ioctl.h> in UAPI header
  fscrypt: don't check for ENOKEY from fscrypt_get_encryption_info()
  fscrypt: remove fscrypt_is_direct_key_policy()
  fscrypt: move fscrypt_valid_enc_modes() to policy.c
  fscrypt: check for appropriate use of DIRECT_KEY flag earlier
  fscrypt: split up fscrypt_supported_policy() by policy version
  fscrypt: introduce fscrypt_needs_contents_encryption()
  ...

Pull fs deduplication fix from David Sterba:
 "This is a fix for deduplication bug: the last block of two files is
  allowed to deduplicated. This got broken in 5.1 by lifting some
  generic checks to VFS layer. The affected filesystems are btrfs and
  xfs.

  The patches are marked for stable as the bug decreases deduplication
  effectivity"

* tag 'fs-dedupe-last-block-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: make deduplication with range including the last block work
  fs: allow deduplication of eof block into the end of the destination file

Pull btrfs updates from David Sterba:
 "Features, highlights:

   - async discard
       - "mount -o discard=async" to enable it
       - freed extents are not discarded immediatelly, but grouped
         together and trimmed later, with IO rate limiting
       - the "sync" mode submits short extents that could have been
         ignored completely by the device, for SATA prior to 3.1 the
         requests are unqueued and have a big impact on performance
       - the actual discard IO requests have been moved out of
         transaction commit to a worker thread, improving commit latency
       - IO rate and request size can be tuned by sysfs files, for now
         enabled only with CONFIG_BTRFS_DEBUG as we might need to
         add/delete the files and don't have a stable-ish ABI for
         general use, defaults are conservative

   - export device state info in sysfs, eg. missing, writeable

   - no discard of extents known to be untouched on disk (eg. after
     reservation)

   - device stats reset is logged with process name and PID that called
     the ioctl

  Fixes:

   - fix missing hole after hole punching and fsync when using NO_HOLES

   - writeback: range cyclic mode could miss some dirty pages and lead
     to OOM

   - two more corner cases for metadata_uuid change after power loss
     during the change

   - fix infinite loop during fsync after mix of rename operations

  Core changes:

   - qgroup assign returns ENOTCONN when quotas not enabled, used to
     return EINVAL that was confusing

   - device closing does not need to allocate memory anymore

   - snapshot aware code got removed, disabled for years due to
     performance problems, reimplmentation will allow to select wheter
     defrag breaks or does not break COW on shared extents

   - tree-checker:
       - check leaf chunk item size, cross check against number of
         stripes
       - verify location keys for DIR_ITEM, DIR_INDEX and XATTR items

   - new self test for physical -> logical mapping code, used for super
     block range exclusion

   - assertion helpers/macros updated to avoid objtool "unreachable
     code" reports on older compilers or config option combinations"

* tag 'for-5.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (84 commits)
  btrfs: free block groups after free'ing fs trees
  btrfs: Fix split-brain handling when changing FSID to metadata uuid
  btrfs: Handle another split brain scenario with metadata uuid feature
  btrfs: Factor out metadata_uuid code from find_fsid.
  btrfs: Call find_fsid from find_fsid_inprogress
  Btrfs: fix infinite loop during fsync after rename operations
  btrfs: set trans->drity in btrfs_commit_transaction
  btrfs: drop log root for dropped roots
  btrfs: sysfs, add devid/dev_state kobject and device attributes
  btrfs: Refactor btrfs_rmap_block to improve readability
  btrfs: Add self-tests for btrfs_rmap_block
  btrfs: selftests: Add support for dummy devices
  btrfs: Move and unexport btrfs_rmap_block
  btrfs: separate definition of assertion failure handlers
  btrfs: device stats, log when stats are zeroed
  btrfs: fix improper setting of scanned for range cyclic write cache pages
  btrfs: safely advance counter when looking up bio csums
  btrfs: remove unused member btrfs_device::work
  btrfs: remove unnecessary wrapper get_alloc_profile
  btrfs: add correction to handle -1 edge case in async discard
  ...

This reverts commit 245595e8.

Guido Günther reported issues with this patch that broke existing
user space. Let's revert it for now and fix it properly later on.

Link: https://patchwork.kernel.org/patch/11291089/
https://lore.kernel.org/lkml/20200121114553.2667556-1-arnd@arndb.de/
Cc: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull x86 mtrr updates from Ingo Molnar:
 "Two changes: restrict /proc/mtrr to CAP_SYS_ADMIN, plus a cleanup"

* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Require CAP_SYS_ADMIN for all access
  x86/mtrr: Get rid of mtrr_seq_show() forward declaration

Pull x86 FPU updates from Ingo Molnar:
 "Three changes: fix a race that can result in FPU corruption, plus two
  cleanups"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Deactivate FPU state after failure during state load
  x86/fpu/xstate: Make xfeature_is_supervisor()/xfeature_is_user() return bool
  x86/fpu/xstate: Fix small issues

Pull x86 cpu-features updates from Ingo Molnar:
 "The biggest change in this cycle was a large series from Sean
  Christopherson to clean up the handling of VMX features. This both
  fixes bugs/inconsistencies and makes the code more coherent and
  future-proof.

  There are also two cleanups and a minor TSX syslog messages
  enhancement"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/cpu: Remove redundant cpu_detect_cache_sizes() call
  x86/cpu: Print "VMX disabled" error message iff KVM is enabled
  KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
  perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
  KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
  KVM: VMX: Check for full VMX support when verifying CPU compatibility
  KVM: VMX: Use VMX feature flag to query BIOS enabling
  KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
  x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
  x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
  x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
  x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
  x86/vmx: Introduce VMX_FEATURES_*
  x86/cpu: Clear VMX feature flag if VMX is not fully enabled
  x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
  x86/centaur: Use common IA32_FEAT_CTL MSR initialization
  x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
  x86/intel: Initialize IA32_FEAT_CTL MSR at boot
  tools/x86: Sync msr-index.h from kernel sources
  selftests, kvm: Replace manual MSR defs with common msr-index.h
  ...

While the document is there, it is currently missing at the
index file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/3b8e7783b1fcc71e4f94af5ea8e5fa264392f8c4.1580193653.git.mchehab+huawei@kernel.orgSigned-off-by: Jonathan Corbet <corbet@lwn.net>

It seems that some files were removed from USB documentation.

Update the links accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/00008303fde6b4e06d027d3b76ae7032614a7030.1580193653.git.mchehab+huawei@kernel.orgSigned-off-by: Jonathan Corbet <corbet@lwn.net>

test.d/ftrace/func-filter-glob.tc is failing on s390 because it has
ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual
__raw_spin_lock symbol isn't in the ftrace function list. Change
'*aw*lock' to '*spin*lock' which would hopefully match some of the
locking functions on all platforms.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>