- 26 Sep, 2019 27 commits
-
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/reiserfs/prints.c: In function check_internal_block_head: fs/reiserfs/prints.c:749:21: warning: variable blkh set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1566379929-118398-6-git-send-email-zhengbin13@huawei.comSigned-off-by:
zhengbin <zhengbin13@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/reiserfs/objectid.c: In function reiserfs_convert_objectid_map_v1: fs/reiserfs/objectid.c:186:25: warning: variable new_objectid_map set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1566379929-118398-5-git-send-email-zhengbin13@huawei.comSigned-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/reiserfs/lbalance.c: In function leaf_paste_entries: fs/reiserfs/lbalance.c:1325:9: warning: variable old_entry_num set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1566379929-118398-4-git-send-email-zhengbin13@huawei.comSigned-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/reiserfs/stree.c: In function search_by_key: fs/reiserfs/stree.c:596:6: warning: variable right_neighbor_of_leaf_node set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1566379929-118398-3-git-send-email-zhengbin13@huawei.comSigned-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/reiserfs/journal.c: In function flush_older_commits: fs/reiserfs/journal.c:894:15: warning: variable first_trans_id set but not used [-Wunused-but-set-variable] fs/reiserfs/journal.c: In function flush_journal_list: fs/reiserfs/journal.c:1354:38: warning: variable last set but not used [-Wunused-but-set-variable] fs/reiserfs/journal.c: In function do_journal_release: fs/reiserfs/journal.c:1916:6: warning: variable flushed set but not used [-Wunused-but-set-variable] fs/reiserfs/journal.c: In function do_journal_end: fs/reiserfs/journal.c:3993:6: warning: variable old_start set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1566379929-118398-2-git-send-email-zhengbin13@huawei.comSigned-off-by:
-
Jia-Ju Bai authored
On lines 3430-3434, bh has been assured to be non-null: cn = get_journal_hash_dev(sb, journal->j_hash_table, blocknr); if (!cn || !cn->bh) { return ret; } bh = cn->bh; Thus, the check of bh on line 3447 is unnecessary and can be removed. Thank Andrew Morton for good advice. Link: http://lkml.kernel.org/r/20190727084019.11307-1-baijiaju1990@gmail.comSigned-off-by:Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Bharath Vedartham <linux.bhar@gmail.com> Signed-off-by:
-
Joe Perches authored
git output parsing depends on the language being en_US english. Make the backtick execution of all `git <foo>` commands set the LANGUAGE of the process to en_US.utf8 before executing the actual command using `export LANGUAGE=en_US.utf8; git <foo>`. Because the command is executed in a child process, the parent LANGUAGE is unchanged. Link: http://lkml.kernel.org/r/bb9f29988f3258281956680ff39c3e19e37dc0b8.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Reported-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
-
Sean Christopherson authored
Git dropped the period from its "ambiguous SHA1" error message in commit 0c99171ad2 ("get_short_sha1: mark ambiguity error for translation"), circa 2016. Drop the period from checkpatch's associated query so as to match both the old and new error messages. Link: http://lkml.kernel.org/r/20190830163103.15914-1-sean.j.christopherson@intel.comSigned-off-by: -
Joe Perches authored
checkpatch allows consecutive open braces, so it should also allow consecutive close braces. Link: http://lkml.kernel.org/r/bfdb49ae2c3fa7b52fa168769e38b48f959880e2.camel@perches.comSigned-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Joe Perches authored
Add another test for __attribute__((section("foo"))) uses that should be __section(foo) Link: http://lkml.kernel.org/r/2f374c3c27054b7f978115270d587c624d9962fc.camel@perches.comSuggested-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Brendan Jackman authored
The arguments of sizeof are not evaluated so arguments are safe to re-use in that context. Excluding sizeof subexpressions means macros like ARRAY_SIZE can pass checkpatch. Link: http://lkml.kernel.org/r/20190806070833.24423-1-brendan.jackman@bluwireless.co.ukSigned-off-by:
Brendan Jackman <brendan.jackman@bluwireless.co.uk> Acked-by:
-
Matteo Croce authored
It can happen that a commit message refers to an invalid commit id, because the referenced hash changed following a rebase, or simply by mistake. Add a check in checkpatch.pl which checks that an hash referenced by a Fixes tag, or just cited in the commit message, is a valid commit id. $ scripts/checkpatch.pl <<'EOF' Subject: [PATCH] test commit Sample test commit to test checkpatch.pl Commit 1da177e4 ("Linux-2.6.12-rc2") really exists, commit 0bba044c4ce7 ("tree") is valid but not a commit, while commit b4cc0b1c0cca ("unknown") is invalid. Fixes: f0cacc14cade ("unknown") Fixes: 1da177e4 ("Linux-2.6.12-rc2") EOF WARNING: Unknown commit id '0bba044c4ce7', maybe rebased or not pulled? #8: commit 0bba044c4ce7 ("tree") is valid but not a commit, WARNING: Unknown commit id 'b4cc0b1c0cca', maybe rebased or not pulled? #9: while commit b4cc0b1c0cca ("unknown") is invalid. WARNING: Unknown commit id 'f0cacc14cade', maybe rebased or not pulled? #11: Fixes: f0cacc14cade ("unknown") total: 0 errors, 3 warnings, 4 lines checked Link: http://lkml.kernel.org/r/20190711001640.13398-1-mcroce@redhat.comSigned-off-by:Matteo Croce <mcroce@redhat.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use perl's m@<match>@ match and not /<match>/ comparisons to avoid an error using c90's // comment style. Miscellanea: o Use normal tab indentation and alignment Link: http://lkml.kernel.org/r/5e4a8fa7901148fbcd77ab391e6dd0e6bf95777f.camel@perches.com Link: http://lkml.kernel.org/r/f08eb62458407a145cfedf959d1091af151cd665.1563575364.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Add more types of lines that appear to be stack dumps that also include hex lines that might otherwise be interpreted as commit IDs. Link: http://lkml.kernel.org/r/ff00208289224f0ca4eaf4ff7c9c6e087dad0a63.camel@perches.com Link: http://lkml.kernel.org/r/f7dc9727795db3802809a24162abe0b67e14123b.1563575364.git.joe@perches.comSigned-off-by:
-
Stephen Boyd authored
I'm seeing a bunch of debug prints from a user of print_hex_dump_bytes() in my kernel logs, but I don't have CONFIG_DYNAMIC_DEBUG enabled nor do I have DEBUG defined in my build. The problem is that print_hex_dump_bytes() calls a wrapper function in lib/hexdump.c that calls print_hex_dump() with KERN_DEBUG level. There are three cases to consider here 1. CONFIG_DYNAMIC_DEBUG=y --> call dynamic_hex_dum() 2. CONFIG_DYNAMIC_DEBUG=n && DEBUG --> call print_hex_dump() 3. CONFIG_DYNAMIC_DEBUG=n && !DEBUG --> stub it out Right now, that last case isn't detected and we still call print_hex_dump() from the stub wrapper. Let's make print_hex_dump_bytes() only call print_hex_dump_debug() so that it works properly in all cases. Case #1, print_hex_dump_debug() calls dynamic_hex_dump() and we get same behavior. Case #2, print_hex_dump_debug() calls print_hex_dump() with KERN_DEBUG and we get the same behavior. Case #3, print_hex_dump_debug() is a nop, changing behavior to what we want, i.e. print nothing. Link: http://lkml.kernel.org/r/20190816235624.115280-1-swboyd@chromium.orgSigned-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Valdis Kletnieks authored
When building with W=1, a number of warnings are issued: CC lib/extable.o lib/extable.c:63:6: warning: no previous prototype for 'sort_extable' [-Wmissing-prototypes] 63 | void sort_extable(struct exception_table_entry *start, | ^~~~~~~~~~~~ lib/extable.c:75:6: warning: no previous prototype for 'trim_init_extable' [-Wmissing-prototypes] 75 | void trim_init_extable(struct module *m) | ^~~~~~~~~~~~~~~~~ lib/extable.c:115:1: warning: no previous prototype for 'search_extable' [-Wmissing-prototypes] 115 | search_extable(const struct exception_table_entry *base, | ^~~~~~~~~~~~~~ Add the missing #include for the prototypes. Link: http://lkml.kernel.org/r/45574.1565235784@turing-policeSigned-off-by:Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
Valdis Kletnieks authored
When building with W=1, we get some warnings: l CC lib/generic-radix-tree.o lib/generic-radix-tree.c:39:10: warning: no previous prototype for 'genradix_root_to_depth' [-Wmissing-prototypes] 39 | unsigned genradix_root_to_depth(struct genradix_root *r) | ^~~~~~~~~~~~~~~~~~~~~~ lib/generic-radix-tree.c:44:23: warning: no previous prototype for 'genradix_root_to_node' [-Wmissing-prototypes] 44 | struct genradix_node *genradix_root_to_node(struct genradix_root *r) | ^~~~~~~~~~~~~~~~~~~~~ They're not used anywhere else, so make them static inline. Link: http://lkml.kernel.org/r/46923.1565236485@turing-policeSigned-off-by: -
Kees Cook authored
As already done for snprintf(), add a check in strscpy() for giant (i.e. likely negative and/or miscalculated) copy sizes, WARN, and error out. Link: http://lkml.kernel.org/r/201907260928.23DE35406@keescookSigned-off-by:
Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: David Laight <David.Laight@aculab.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Stephen Kitt <steve@sk2.org> Cc: Jann Horn <jannh@google.com> Signed-off-by:
-
Qian Cai authored
There are many of those warnings. In file included from ./arch/powerpc/include/asm/paca.h:15, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./include/asm-generic/preempt.h:5, from ./arch/powerpc/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:51, from fs/fs-writeback.c:19: In function 'strncpy', inlined from 'perf_trace_writeback_page_template' at ./include/trace/events/writeback.h:56:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix it by using the new strscpy_pad() which was introduced in "lib/string: Add strscpy_pad() function" and will always be NUL-terminated instead of strncpy(). Also, change strlcpy() to use strscpy_pad() in this file for consistency. Link: http://lkml.kernel.org/r/1564075099-27750-1-git-send-email-cai@lca.pw Fixes: 455b2864 ("writeback: Initial tracing support") Fixes: 028c2dd1 ("writeback: Add tracing to balance_dirty_pages") Fixes: e84d0a4f ("writeback: trace event writeback_queue_io") Fixes: b48c104d ("writeback: trace event bdi_dirty_ratelimit") Fixes: cc1676d9 ("writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()") Fixes: 9fb0a7da ("writeback: add more tracepoints") Signed-off-by:Qian Cai <cai@lca.pw> Reviewed-by:
-
Joe Perches authored
core-api should show all the various string functions including the newly added stracpy and stracpy_pad. Miscellanea: o Update the Returns: value for strscpy o fix a defect with %NUL) [joe@perches.com: correct return of -E2BIG descriptions] Link: http://lkml.kernel.org/r/29f998b4c1a9d69fbeae70500ba0daa4b340c546.1563889130.git.joe@perches.com Link: http://lkml.kernel.org/r/224a6ebf39955f4107c0c376d66155d970e46733.1563841972.git.joe@perches.comSigned-off-by:
-
Michel Lespinasse authored
Change the definition of the RBCOMPUTE function. The propagate callback repeatedly calls RBCOMPUTE as it moves from leaf to root. it wants to stop recomputing once the augmented subtree information doesn't change. This was previously checked using the == operator, but that only works when the augmented subtree information is a scalar field. This commit modifies the RBCOMPUTE function so that it now sets the augmented subtree information instead of returning it, and returns a boolean value indicating if the propagate callback should stop. The motivation for this change is that I want to introduce augmented rbtree uses where the augmented data for the subtree is a struct instead of a scalar. Link: http://lkml.kernel.org/r/20190703040156.56953-4-walken@google.comSigned-off-by:
Michel Lespinasse <walken@google.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by:
-
Michel Lespinasse authored
Add RB_DECLARE_CALLBACKS_MAX, which generates augmented rbtree callbacks for the case where the augmented value is a scalar whose definition follows a max(f(node)) pattern. This actually covers all present uses of RB_DECLARE_CALLBACKS, and saves some (source) code duplication in the various RBCOMPUTE function definitions. [walken@google.com: fix mm/vmalloc.c] Link: http://lkml.kernel.org/r/CANN689FXgK13wDYNh1zKxdipeTuALG4eKvKpsdZqKFJ-rvtGiQ@mail.gmail.com [walken@google.com: re-add check to check_augmented()] Link: http://lkml.kernel.org/r/20190727022027.GA86863@google.com Link: http://lkml.kernel.org/r/20190703040156.56953-3-walken@google.comSigned-off-by:
-
Michel Lespinasse authored
Patch series "make RB_DECLARE_CALLBACKS more generic", v3. These changes are intended to make the RB_DECLARE_CALLBACKS macro more generic (allowing the aubmented subtree information to be a struct instead of a scalar). I have verified the compiled lib/interval_tree.o and mm/mmap.o files to check that they didn't change. This held as expected for interval_tree.o; mmap.o did have some changes which could be reverted by marking __vma_link_rb as noinline. I did not add such a change to the patchset; I felt it was reasonable enough to leave the inlining decision up to the compiler. This patch (of 3): Add a short comment summarizing the arguments to RB_DECLARE_CALLBACKS. The arguments are also now capitalized. This copies the style of the INTERVAL_TREE_DEFINE macro. No functional changes in this commit, only comments and capitalization. Link: http://lkml.kernel.org/r/20190703040156.56953-2-walken@google.comSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
-
Michel Lespinasse authored
As was already noted in rbtree.h, the logic to cache rb_first (or rb_last) can easily be implemented externally to the core rbtree api. This commit takes the changes applied to the include/linux/ and lib/ rbtree files in 9f973cb3 ("lib/rbtree: avoid generating code twice for the cached versions"), and applies these to the tools/include/linux/ and tools/lib/ files as well to keep them synchronized. Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.comSigned-off-by:
-
Valdis Kletnieks authored
When building with W=1, gcc properly complains that there's no prototypes: CC kernel/elfcore.o kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes] 7 | Elf_Half __weak elf_core_extra_phdrs(void) | ^~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes] 12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes] 17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm) | ^~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes] 22 | size_t __weak elf_core_extra_data_size(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ Provide the include file so gcc is happy, and we don't have potential code drift Link: http://lkml.kernel.org/r/29875.1565224705@turing-policeSigned-off-by: -
Masahiro Yamada authored
Add a header include guard just in case. My motivation is to allow Kbuild to detect missing include guard: https://patchwork.kernel.org/patch/11063011/ Before I enable this checker I want to fix as many headers as possible. Link: http://lkml.kernel.org/r/20190728154728.11126-1-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Michal Hocko authored
Thomas has noticed the following NULL ptr dereference when using cgroup v1 kmem limit: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 #42 Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015 RIP: 0010:create_empty_buffers+0x24/0x100 Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d RSP: 0018:ffff927ac1b37bf8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: fffff2d4429fd740 RCX: 0000000100097149 RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9075a99fbe00 RBP: 0000000000000000 R08: fffff2d440949cc8 R09: 00000000000960c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff907601f18360 R14: 0000000000002000 R15: 0000000000001000 FS: 00007fb55b288bc0(0000) GS:ffff90761f8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000007aebc002 CR4: 00000000001606e0 Call Trace: create_page_buffers+0x4d/0x60 __block_write_begin_int+0x8e/0x5a0 ? ext4_inode_attach_jinode.part.82+0xb0/0xb0 ? jbd2__journal_start+0xd7/0x1f0 ext4_da_write_begin+0x112/0x3d0 generic_perform_write+0xf1/0x1b0 ? file_update_time+0x70/0x140 __generic_file_write_iter+0x141/0x1a0 ext4_file_write_iter+0xef/0x3b0 __vfs_write+0x17e/0x1e0 vfs_write+0xa5/0x1a0 ksys_write+0x57/0xd0 do_syscall_64+0x55/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg fails __GFP_NOFAIL charge when the kmem limit is reached. This is a wrong behavior because nofail allocations are not allowed to fail. Normal charge path simply forces the charge even if that means to cross the limit. Kmem accounting should be doing the same. Link: http://lkml.kernel.org/r/20190906125608.32129-1-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Debugged-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Thomas Lindroth <thomas.lindroth@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 24 Sep, 2019 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few small remaining wrap-up for this merge window. Most of patches are device-specific (HD-audio and USB-audio quirks, FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is a simple fix (actually two commits) for ASoC core" * tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add DSD support for EVGA NU Audio ALSA: hda - Add laptop imic fixup for ASUS M9V laptop ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies ASoC: pcm3168a: The codec does not support S32_LE ASoC: core: use list_del_init and move it back to soc_cleanup_component ALSA: hda/realtek - PCI quirk for Medion E4254 ALSA: hda - Apply AMD controller workaround for Raven platform ASoC: rsnd: do error check after rsnd_channel_normalization() ASoC: atmel_ssc_dai: Remove wrong spinlock usage ASoC: core: delete component->card_list in soc_remove_component only ASoC: fsl_sai: Fix noise when using EDMA ALSA: usb-audio: Add Hiby device family to quirks for native DSD support ALSA: hda/realtek - Fix alienware headset mic ALSA: dice: fix wrong packet parameter for Alesis iO26
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "A collection of later fixes and additions, that weren't quite ready for pushing out with the initial pull request. This contains: - Fix potential use-after-free of shadow requests (Jackie) - Fix potential OOM crash in request allocation (Jackie) - kmalloc+memcpy -> kmemdup cleanup (Jackie) - Fix poll crash regression (me) - Fix SQ thread not being nice and giving up CPU for !PREEMPT (me) - Add support for timeouts, making it easier to do epoll_wait() conversions, for instance (me) - Ensure io_uring works without f_ops->read_iter() and f_ops->write_iter() (me)" * tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block: io_uring: correctly handle non ->{read,write}_iter() file_operations io_uring: IORING_OP_TIMEOUT support io_uring: use cond_resched() in sqthread io_uring: fix potential crash issue due to io_get_req failure io_uring: ensure poll commands clear ->sqe io_uring: fix use-after-free of shadow_req io_uring: use kmemdup instead of kmalloc and memcpy -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block updates from Jens Axboe: "Some later additions that weren't quite done for the first pull request, and also a few fixes that have arrived since. This contains: - Kill silly pktcdvd warning on attempting to register a non-scsi passthrough device (me) - Use symbolic constants for the block t10 protection types, and switch to handling it in core rather than in the drivers (Max) - libahci platform missing node put fix (Nishka) - Small series of fixes for BFQ (Paolo) - Fix possible nbd crash (Xiubo)" * tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block: block: drop device references in bsg_queue_rq() block: t10-pi: fix -Wswitch warning pktcdvd: remove warning on attempting to register non-passthrough dev ata: libahci_platform: Add of_node_put() before loop exit nbd: fix possible page fault for nbd disk nbd: rename the runtime flags as NBD_RT_ prefixed block, bfq: push up injection only after setting service time block, bfq: increase update frequency of inject limit block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1 block, bfq: update inject limit only after injection occurred block: centralize PI remapping logic to the block layer block: use symbolic constants for t10_pi type -
Linus Torvalds authored
Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ...
-
Qian Cai authored
set_zspage_inuse() was introduced in the commit 4f42047b ("zsmalloc: use accessor") but all the users of it were removed later by the commits, bdb0af7c ("zsmalloc: factor page chain functionality out") 3783689a ("zsmalloc: introduce zspage structure") so the function can be safely removed now. Link: http://lkml.kernel.org/r/1568658408-19374-1-git-send-email-cai@lca.pwSigned-off-by:
-
Vitaly Wool authored
zswap_writeback_entry() maps a handle to read swpentry first, and then in the most common case it would map the same handle again. This is ok when zbud is the backend since its mapping callback is plain and simple, but it slows things down for z3fold. Since there's hardly a point in unmapping a handle _that_ fast as zswap_writeback_entry() does when it reads swpentry, the suggestion is to keep the handle mapped till the end. Link: http://lkml.kernel.org/r/20190916004640.b453167d3556c4093af4cf7d@gmail.comSigned-off-by:
Vitaly Wool <vitalywool@gmail.com> Reviewed-by:
Dan Streetman <ddstreet@ieee.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Hui Zhu authored
This is the third version that was updated according to the comments from Sergey Senozhatsky https://lkml.org/lkml/2019/5/29/73 and Shakeel Butt https://lkml.org/lkml/2019/6/4/973 zswap compresses swap pages into a dynamically allocated RAM-based memory pool. The memory pool should be zbud, z3fold or zsmalloc. All of them will allocate unmovable pages. It will increase the number of unmovable page blocks that will bad for anti-fragment. zsmalloc support page migration if request movable page: handle = zs_malloc(zram->mem_pool, comp_len, GFP_NOIO | __GFP_HIGHMEM | __GFP_MOVABLE); And commit "zpool: Add malloc_support_movable to zpool_driver" add zpool_malloc_support_movable check malloc_support_movable to make sure if a zpool support allocate movable memory. This commit let zswap allocate block with gfp __GFP_HIGHMEM | __GFP_MOVABLE if zpool support allocate movable memory. Following part is test log in a pc that has 8G memory and 2G swap. Without this commit: ~# echo lz4 > /sys/module/zswap/parameters/compressor ~# echo zsmalloc > /sys/module/zswap/parameters/zpool ~# echo 1 > /sys/module/zswap/parameters/enabled ~# swapon /swapfile ~# cd /home/teawater/kernel/vm-scalability/ /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024)) /home/teawater/kernel/vm-scalability# ./case-anon-w-seq 2717908992 bytes / 4826062 usecs = 549973 KB/s 2717908992 bytes / 4864201 usecs = 545661 KB/s 2717908992 bytes / 4867015 usecs = 545346 KB/s 2717908992 bytes / 4915485 usecs = 539968 KB/s 397853 usecs to free memory 357820 usecs to free memory 421333 usecs to free memory 420454 usecs to free memory /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo Page block order: 9 Pages per block: 512 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0 Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Unmovable 6 5 8 6 6 5 4 1 1 1 0 Node 0, zone DMA32, type Movable 25 20 20 19 22 15 14 11 11 5 767 Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 4753 5588 5159 4613 3712 2520 1448 594 188 11 0 Node 0, zone Normal, type Movable 16 3 457 2648 2143 1435 860 459 223 224 296 Node 0, zone Normal, type Reclaimable 0 0 44 38 11 2 0 0 0 0 0 Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate Node 0, zone DMA 1 7 0 0 0 0 Node 0, zone DMA32 4 1652 0 0 0 0 Node 0, zone Normal 931 1485 15 0 0 0 With this commit: ~# echo lz4 > /sys/module/zswap/parameters/compressor ~# echo zsmalloc > /sys/module/zswap/parameters/zpool ~# echo 1 > /sys/module/zswap/parameters/enabled ~# swapon /swapfile ~# cd /home/teawater/kernel/vm-scalability/ /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024)) /home/teawater/kernel/vm-scalability# ./case-anon-w-seq 2717908992 bytes / 4689240 usecs = 566020 KB/s 2717908992 bytes / 4760605 usecs = 557535 KB/s 2717908992 bytes / 4803621 usecs = 552543 KB/s 2717908992 bytes / 5069828 usecs = 523530 KB/s 431546 usecs to free memory 383397 usecs to free memory 456454 usecs to free memory 224487 usecs to free memory /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo Page block order: 9 Pages per block: 512 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0 Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Unmovable 10 8 10 9 10 4 3 2 3 0 0 Node 0, zone DMA32, type Movable 18 12 14 16 16 11 9 5 5 6 775 Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 2669 1236 452 118 37 14 4 1 2 3 0 Node 0, zone Normal, type Movable 3850 6086 5274 4327 3510 2494 1520 934 438 220 470 Node 0, zone Normal, type Reclaimable 56 93 155 124 47 31 17 7 3 0 0 Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate Node 0, zone DMA 1 7 0 0 0 0 Node 0, zone DMA32 4 1650 2 0 0 0 Node 0, zone Normal 79 2326 26 0 0 0 You can see that the number of unmovable page blocks is decreased when the kernel has this commit. Link: http://lkml.kernel.org/r/20190605100630.13293-2-teawaterz@linux.alibaba.comSigned-off-by:
Hui Zhu <teawaterz@linux.alibaba.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Hui Zhu authored
As a zpool_driver, zsmalloc can allocate movable memory because it support migate pages. But zbud and z3fold cannot allocate movable memory. Add malloc_support_movable to zpool_driver. If a zpool_driver support allocate movable memory, set it to true. And add zpool_malloc_support_movable check malloc_support_movable to make sure if a zpool support allocate movable memory. Link: http://lkml.kernel.org/r/20190605100630.13293-1-teawaterz@linux.alibaba.comSigned-off-by:
-
Miles Chen authored
Replace "fault_mm" with "vmf" in code comment because commit cfda0526 ("userfaultfd: shmem: add userfaultfd hook for shared memory faults") has changed the prototpye of shmem_getpage_gfp() - pass vmf instead of fault_mm to the function. Before: static int shmem_getpage_gfp(struct inode *inode, pgoff_t index, struct page **pagep, enum sgp_type sgp, gfp_t gfp, struct mm_struct *fault_mm, int *fault_type); After: static int shmem_getpage_gfp(struct inode *inode, pgoff_t index, struct page **pagep, enum sgp_type sgp, gfp_t gfp, struct vm_area_struct *vma, struct vm_fault *vmf, vm_fault_t *fault_type); Link: http://lkml.kernel.org/r/20190816100204.9781-1-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Mike Rapoport authored
madvise_behavior() converts -ENOMEM to -EAGAIN in several places using identical code. Move that code to a common error handling path. No functional changes. Link: http://lkml.kernel.org/r/1564640896-1210-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Acked-by:
Pankaj Gupta <pagupta@redhat.com> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by:
-
Ivan Khoronzhuk authored
The AF_XDP sockets umem mapping interface uses XDP_UMEM_PGOFF_FILL_RING and XDP_UMEM_PGOFF_COMPLETION_RING offsets. These offsets are established already and are part of the configuration interface. But for 32-bit systems, using AF_XDP socket configuration, these values are too large to pass the maximum allowed file size verification. The offsets can be tuned off, but instead of changing the existing interface, let's extend the max allowed file size for sockets. No one has been using this until this patch with 32 bits as without this fix af_xdp sockets can't be used at all, so it unblocks af_xdp socket usage for 32bit systems. All list of mmap cbs for sockets was verified for side effects and all of them contain dummy cb - sock_no_mmap() at this moment, except the following: xsk_mmap() - it's what this fix is needed for. tcp_mmap() - doesn't have obvious issues with pgoff - no any references on it. packet_mmap() - return -EINVAL if it's even set. Link: http://lkml.kernel.org/r/20190812124326.32146-1-ivan.khoronzhuk@linaro.orgSigned-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
-
Wei Yang authored
When addr is out of range of the whole rb_tree, pprev will point to the right-most node. rb_tree facility already provides a helper function, rb_last(), to do this task. We can leverage this instead of reimplementing it. This patch refines find_vma_prev() with rb_last() to make it a little nicer to read. [akpm@linux-foundation.org: little cleanup, per Vlastimil] Link: http://lkml.kernel.org/r/20190809001928.4950-1-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
