Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from sparc64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from ppc64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from s390x JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from arm64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from x86_64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.

There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.

While trying to work out an exception handling scheme, I also
noticed that programs crafted like the following will currently
pass the verifier:

  0: (bf) r6 = r1
  1: (85) call pc+8
  caller:
   R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
  callee:
   frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_1
  10: (b4) (u32) r2 = (u32) 0
  11: (b4) (u32) r3 = (u32) 1
  12: (3c) (u32) r3 /= (u32) r2
  13: (61) r0 = *(u32 *)(r1 +76)
  14: (95) exit
  returning from callee:
   frame1: R0_w=pkt(id=0,off=0,r=0,imm=0)
           R1=ctx(id=0,off=0,imm=0) R2_w=inv0
           R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
           R10=fp0,call_1
  to caller at 2:
   R0_w=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0)
   R10=fp0,call_-1

  from 14 to 2: R0=pkt(id=0,off=0,r=0,imm=0)
                R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
  2: (bf) r1 = r6
  3: (61) r1 = *(u32 *)(r1 +80)
  4: (bf) r2 = r0
  5: (07) r2 += 8
  6: (2d) if r2 > r1 goto pc+1
   R0=pkt(id=0,off=0,r=8,imm=0) R1=pkt_end(id=0,off=0,imm=0)
   R2=pkt(id=0,off=8,r=8,imm=0) R6=ctx(id=0,off=0,imm=0)
   R10=fp0,call_-1
  7: (71) r0 = *(u8 *)(r0 +0)
  8: (b7) r0 = 1
  9: (95) exit

  from 6 to 8: safe
  processed 16 insns (limit 131072), stack depth 0+0

Basically what happens is that in the subprog we make use of a
div/mod by 0 exception and in the 'normal' subprog's exit path
we just return skb->data back to the main prog. This has the
implication that the verifier thinks we always get a pkt pointer
in R0 while we still have the implicit 'return 0' from the div
as an alternative unconditional return path earlier. Thus, R0
then contains 0, meaning back in the parent prog we get the
address range of [0x0, skb->data_end] as read and writeable.
Similar can be crafted with other pointer register types.

Since i) BPF_ABS/IND is not allowed in programs that contain
BPF to BPF calls (and generally it's also disadvised to use in
native eBPF context), ii) unknown opcodes don't return zero
anymore, iii) we don't return an exception code in dead branches,
the only last missing case affected and to fix is the div/mod
handling.

What we would really need is some infrastructure to propagate
exceptions all the way to the original prog unwinding the
current stack and returning that code to the caller of the
BPF program. In user space such exception handling for similar
runtimes is typically implemented with setjmp(3) and longjmp(3)
as one possibility which is not available in the kernel,
though (kgdb used to implement it in kernel long time ago). I
implemented a PoC exception handling mechanism into the BPF
interpreter with porting setjmp()/longjmp() into x86_64 and
adding a new internal BPF_ABRT opcode that can use a program
specific exception code for all exception cases we have (e.g.
div/mod by 0, unknown opcodes, etc). While this seems to work
in the constrained BPF environment (meaning, here, we don't
need to deal with state e.g. from memory allocations that we
would need to undo before going into exception state), it still
has various drawbacks: i) we would need to implement the
setjmp()/longjmp() for every arch supported in the kernel and
for x86_64, arm64, sparc64 JITs currently supporting calls,
ii) it has unconditional additional cost on main program
entry to store CPU register state in initial setjmp() call,
and we would need some way to pass the jmp_buf down into
___bpf_prog_run() for main prog and all subprogs, but also
storing on stack is not really nice (other option would be
per-cpu storage for this, but it also has the drawback that
we need to disable preemption for every BPF program types).
All in all this approach would add a lot of complexity.

Another poor-man's solution would be to have some sort of
additional shared register or scratch buffer to hold state
for exceptions, and test that after every call return to
chain returns and pass R0 all the way down to BPF prog caller.
This is also problematic in various ways: i) an additional
register doesn't map well into JITs, and some other scratch
space could only be on per-cpu storage, which, again has the
side-effect that this only works when we disable preemption,
or somewhere in the input context which is not available
everywhere either, and ii) this adds significant runtime
overhead by putting conditionals after each and every call,
as well as implementation complexity.

Yet another option is to teach verifier that div/mod can
return an integer, which however is also complex to implement
as verifier would need to walk such fake 'mov r0,<code>; exit;'
sequeuence and there would still be no guarantee for having
propagation of this further down to the BPF caller as proper
exception code. For parent prog, it is also is not distinguishable
from a normal return of a constant scalar value.

The approach taken here is a completely different one with
little complexity and no additional overhead involved in
that we make use of the fact that a div/mod by 0 is undefined
behavior. Instead of bailing out, we adapt the same behavior
as on some major archs like ARMv8 [0] into eBPF as well:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides. I verified this
also with a test program compiled by gcc and clang, and the
behavior matches with the spec. Going forward we adapt the
eBPF verifier to emit such rewrites once div/mod by register
was seen. cBPF is not touched and will keep existing 'return 0'
semantics. Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary and
this way we would also have the option of more flexibility
from LLVM code generation side (which is then fully visible
to verifier). Thus, this patch i) fixes the panic seen in
above program and ii) doesn't bypass the verifier observations.

  [0] ARM Architecture Reference Manual, ARMv8 [ARM DDI 0487B.b]
      http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487b.b/DDI0487B_b_armv8_arm.pdf
      1) aarch64 instruction set: section C3.4.7 and C6.2.279 (UDIV)
         "A division by zero results in a zero being written to
          the destination register, without any indication that
          the division by zero occurred."
      2) aarch32 instruction set: section F1.4.8 and F5.1.263 (UDIV)
         "For the SDIV and UDIV instructions, division by zero
          always returns a zero result."

Fixes: f4d7e40a ("bpf: introduce function calls (verification)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Recent findings by syzcaller fixed in 7891a87e ("bpf: arsh is
not supported in 32 bit alu thus reject it") triggered a warning
in the interpreter due to unknown opcode not being rejected by
the verifier. The 'return 0' for an unknown opcode is really not
optimal, since with BPF to BPF calls, this would go untracked by
the verifier.

Do two things here to improve the situation: i) perform basic insn
sanity check early on in the verification phase and reject every
non-uapi insn right there. The bpf_opcode_in_insntable() table
reuses the same mapping as the jumptable in ___bpf_prog_run() sans
the non-public mappings. And ii) in ___bpf_prog_run() we do need
to BUG in the case where the verifier would ever create an unknown
opcode due to some rewrites.

Note that JITs do not have such issues since they would punt to
interpreter in these situations. Moreover, the BPF_JIT_ALWAYS_ON
would also help to avoid such unknown opcodes in the first place.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Given we recently had c131187d ("bpf: fix branch pruning
logic") and 95a762e2 ("bpf: fix incorrect sign extension in
check_alu_op()") in particular where before verifier skipped
verification of the wrongly assumed dead branch, we should not
just replace the dead code parts with nops (mov r0,r0). If there
is a bug such as fixed in 95a762e2 in future again, where
runtime could execute those insns, then one of the potential
issues with the current setting would be that given the nops
would be at the end of the program, we could execute out of
bounds at some point.

The best in such case would be to just exit the BPF program
altogether and return an exception code. However, given this
would require two instructions, and such a dead code gap could
just be a single insn long, we would need to place 'r0 = X; ret'
snippet at the very end after the user program or at the start
before the program (where we'd skip that region on prog entry),
and then place unconditional ja's into the dead code gap.

While more complex but possible, there's still another block
in the road that currently prevents from this, namely BPF to
BPF calls. The issue here is that such exception could be
returned from a callee, but the caller would not know that
it's an exception that needs to be propagated further down.
Alternative that has little complexity is to just use a ja-1
code for now which will trap the execution here instead of
silently doing bad things if we ever get there due to bugs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Very minor optimization; saves 1 byte per program in x86_64
JIT in cBPF prologue.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Do not build lib/bpf/bpf.o with this Makefile but use the one from the
library directory.  This avoid making a buggy bpf.o file (e.g. missing
symbols).

This patch is useful if some code (e.g. Landlock tests) needs both the
bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf).
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Removed commented lines from test_tcpbpf_kern.c

Fixes: d6d4f60c bpf: add selftest for tcpbpf
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Make the code more readable.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Lawrence Brakmo says:

====================
This patchset adds support for:

- direct R or R/W access to many tcp_sock fields
- passing up to 4 arguments to sock_ops BPF functions
- tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
- optionally calling sock_ops BPF program when RTO fires
- optionally calling sock_ops BPF program when packet is retransmitted
- optionally calling sock_ops BPF program when TCP state changes
- access to tclass and sk_txhash
- new selftest

v2: Fixed commit message 0/11. The commit is to "bpf-next" but the patch
    below used "bpf" and Patchwork didn't work correctly.
v3: Cleaned RTO callback as per  Yuchung's comment
    Added BPF enum for TCP states as per  Alexei's comment
v4: Fixed compile warnings related to detecting changes between TCP
    internal states and the BPF defined states.
v5: Fixed comment issues in some selftest files
    Fixed accesss issue with u64 fields in bpf_sock_ops struct
v6: Made fixes based on comments form Eric Dumazet:
    The field bpf_sock_ops_cb_flags was addded in a hole on 64bit kernels
    Field bpf_sock_ops_cb_flags is now set through a helper function
    which returns an error when a BPF program tries to set bits for
    callbacks that are not supported in the current kernel.
    Added a comment indicating that when adding fields to bpf_sock_ops_kern
    they should be added before the field named "temp" if they need to be
    cleared before calling the BPF function.
v7: Enfornced fields "op" and "replylong[1] .. replylong[3]" not be writable
    based on comments form Eric Dumazet and Alexei Starovoitov.
    Filled 32 bit hole in bpf_sock_ops struct with sk_txhash based on
    comments from Daniel Borkmann.
    Removed unused functions (tcp_call_bpf_1arg, tcp_call_bpf_4arg) based
    on comments from Daniel Borkmann.
v8: Add commit message 00/12
    Add Acked-by as appropriate
v9: Moved the bug fix to the front of the patchset
    Changed RETRANS_CB so it is always called (before it was only called if
    the retransmit succeeded). It is now called with an extra argument, the
    return value of tcp_transmit_skb (0 => success). Based on comments
    from Yuchung Cheng.
    Added support for reading 2 new fields, sacked_out and lost_out, based on
    comments from Yuchung Cheng.
v10: Moved the callback flags from include/uapi/linux/tcp.h to
     include/uapi/linux/bpf.h
     Cleaned up the test in selftest. Added a timeout so it always completes,
     even if the client is not communicating with the server. Made it faster
     by removing the sleeps. Made sure it works even when called back-to-back
     20 times.

Consists of the following patches:
[PATCH bpf-next v10 01/12] bpf: Only reply field should be writeable
[PATCH bpf-next v10 02/12] bpf: Make SOCK_OPS_GET_TCP size
[PATCH bpf-next v10 03/12] bpf: Make SOCK_OPS_GET_TCP struct
[PATCH bpf-next v10 04/12] bpf: Add write access to tcp_sock and sock
[PATCH bpf-next v10 05/12] bpf: Support passing args to sock_ops bpf
[PATCH bpf-next v10 06/12] bpf: Adds field bpf_sock_ops_cb_flags to
[PATCH bpf-next v10 07/12] bpf: Add sock_ops RTO callback
[PATCH bpf-next v10 08/12] bpf: Add support for reading sk_state and
[PATCH bpf-next v10 09/12] bpf: Add sock_ops R/W access to tclass
[PATCH bpf-next v10 10/12] bpf: Add BPF_SOCK_OPS_RETRANS_CB
[PATCH bpf-next v10 11/12] bpf: Add BPF_SOCK_OPS_STATE_CB
[PATCH bpf-next v10 12/12] bpf: add selftest for tcpbpf
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Added a selftest for tcpbpf (sock_ops) that checks that the appropriate
callbacks occured and that it can access tcp_sock fields and that their
values are correct.

Run with command: ./test_tcpbpf_user
Adding the flag "-d" will show why it did not pass.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds support for calling sock_ops BPF program when there is a TCP state
change. Two arguments are used; one for the old state and another for
the new state.

There is a new enum in include/uapi/linux/bpf.h that exports the TCP
states that prepends BPF_ to the current TCP state names. If it is ever
necessary to change the internal TCP state values (other than adding
more to the end), then it will become necessary to convert from the
internal TCP state value to the BPF value before calling the BPF
sock_ops function. There are a set of compile checks added in tcp.c
to detect if the internal and BPF values differ so we can make the
necessary fixes.

New op: BPF_SOCK_OPS_STATE_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds support for calling sock_ops BPF program when there is a
retransmission. Three arguments are used; one for the sequence number,
another for the number of segments retransmitted, and the last one for
the return value of tcp_transmit_skb (0 => success).
Does not include syn-ack retransmissions.

New op: BPF_SOCK_OPS_RETRANS_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds direct write access to sk_txhash and access to tclass for ipv6
flows through getsockopt and setsockopt. Sample usage for tclass:

  bpf_getsockopt(skops, SOL_IPV6, IPV6_TCLASS, &v, sizeof(v))

where skops is a pointer to the ctx (struct bpf_sock_ops).
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add support for reading many more tcp_sock fields

  state,	same as sk->sk_state
  rtt_min	same as sk->rtt_min.s[0].v (current rtt_min)
  snd_ssthresh
  rcv_nxt
  snd_nxt
  snd_una
  mss_cache
  ecn_flags
  rate_delivered
  rate_interval_us
  packets_out
  retrans_out
  total_retrans
  segs_in
  data_segs_in
  segs_out
  data_segs_out
  lost_out
  sacked_out
  sk_txhash
  bytes_received (__u64)
  bytes_acked    (__u64)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds an optional call to sock_ops BPF program based on whether the
BPF_SOCK_OPS_RTO_CB_FLAG is set in bpf_sock_ops_flags.
The BPF program is passed 2 arguments: icsk_retransmits and whether the
RTO has expired.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds field bpf_sock_ops_cb_flags to tcp_sock and bpf_sock_ops. Its primary
use is to determine if there should be calls to sock_ops bpf program at
various points in the TCP code. The field is initialized to zero,
disabling the calls. A sock_ops BPF program can set it, per connection and
as necessary, when the connection is established.

It also adds support for reading and writting the field within a
sock_ops BPF program. Reading is done by accessing the field directly.
However, writing is done through the helper function
bpf_sock_ops_cb_flags_set, in order to return an error if a BPF program
is trying to set a callback that is not supported in the current kernel
(i.e. running an older kernel). The helper function returns 0 if it was
able to set all of the bits set in the argument, a positive number
containing the bits that could not be set, or -EINVAL if the socket is
not a full TCP socket.

Examples of where one could call the bpf program:

1) When RTO fires
2) When a packet is retransmitted
3) When the connection terminates
4) When a packet is sent
5) When a packet is received
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds support for passing up to 4 arguments to sock_ops bpf functions. It
reusues the reply union, so the bpf_sock_ops structures are not
increased in size.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds a macro, SOCK_OPS_SET_FIELD, for writing to
struct tcp_sock or struct sock fields. This required adding a new
field "temp" to struct bpf_sock_ops_kern for temporary storage that
is used by sock_ops_convert_ctx_access. It is used to store and recover
the contents of a register, so the register can be used to store the
address of the sk. Since we cannot overwrite the dst_reg because it
contains the pointer to ctx, nor the src_reg since it contains the value
we want to store, we need an extra register to contain the address
of the sk.

Also adds the macro SOCK_OPS_GET_OR_SET_FIELD that calls one of the
GET or SET macros depending on the value of the TYPE field.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Changed SOCK_OPS_GET_TCP to SOCK_OPS_GET_FIELD and added 2
arguments so now it can also work with struct sock fields.
The first argument is the name of the field in the bpf_sock_ops
struct, the 2nd argument is the name of the field in the OBJ struct.

Previous: SOCK_OPS_GET_TCP(FIELD_NAME)
New:      SOCK_OPS_GET_FIELD(BPF_FIELD, OBJ_FIELD, OBJ)

Where OBJ is either "struct tcp_sock" or "struct sock" (without
quotation). BPF_FIELD is the name of the field in the bpf_sock_ops
struct and OBJ_FIELD is the name of the field in the OBJ struct.

Although the field names are currently the same, the kernel struct names
could change in the future and this change makes it easier to support
that.

Note that adding access to tcp_sock fields in sock_ops programs does
not preclude the tcp_sock fields from being removed as long as we are
willing to do one of the following:

  1) Return a fixed value (e.x. 0 or 0xffffffff), or
  2) Make the verifier fail if that field is accessed (i.e. program
    fails to load) so the user will know that field is no longer
    supported.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Make SOCK_OPS_GET_TCP helper macro size independent (before only worked
with 4-byte fields.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, a sock_ops BPF program can write the op field and all the
reply fields (reply and replylong). This is a bug. The op field should
not have been writeable and there is currently no way to use replylong
field for indices >= 1. This patch enforces that only the reply field
(which equals replylong[0]) is writeable.

Fixes: 40304b2a ("bpf: BPF support for sock_ops")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

If we then OR this with 0x40, then the value of 6th bit (0th is first bit)
become known, so the right mask is 0xbf instead of 0xcf.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

John Fastabend says:

====================
The sockmap sample is pretty simple at the moment. All it does is open
a few sockets attach BPF programs/sockmaps and sends a few packets.

However, for testing and debugging I wanted to have more control over
the sendmsg format and data than provided by tools like iperf3/netperf,
etc. The reason is for testing BPF programs and stream parser it is
helpful to be able submit multiple sendmsg calls with different msg
layouts. For example lots of 1B iovs or a single large MB of data, etc.

Additionally, my current test setup requires an entire orchestration
layer (cilium) to run. As well as lighttpd and http traffic generators
or for kafka testing brokers and clients. This makes it a bit more
difficult when doing performance optimizations to incrementally test
small changes and come up with performance delta's and perf numbers.

By adding a few more options and an additional few tests the sockmap
sample program can show a more complete example and do some of the
above. Because the sample program is self contained it doesn't require
additional infrastructure to run either.

This series, although still fairly crude, does provide some nice
additions. They are

  - a new sendmsg tests with a sender and recv threads
  - a new base tests so we can get metrics/data without BPF
  - multiple GBps of throughput on base and sendmsg tests
  - automatically set rlimit and common variables

That said the UI is still primitive, more features could be added,
more tests might be useful, the reporting is bare bones, etc. But,
IMO lets push this now rather than sit on it for weeks until I get
time to do the above improvements. Additional patches can address
the other limitations/issues. Another thing I am considering is
moving this into selftests, after a few more fixes so we avoid
false failures, so that we get more sockmap testing.

v2: removed bogus file added by patch 3/7
v3: 1/7 replace goto out with returns, remove sighandler update,
    2/7 free iov in error cases
    3/7 fix bogus makefile change, bail out early on errors
v4: add Martin's "nits" and ACKs along with fixes to 2/7 iov free
    also pointed out by Martin.

Thanks Daniel and Martin for the reviews!
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Avoid extra step of setting limit from cmdline and do it directly in
the program.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Put client sockets in blocking mode otherwise with sendmsg tests
its easy to overrun the socket buffers which results in the test
being aborted.

The original non-blocking was added to handle listen/accept with
a single thread the client/accepted sockets do not need to be
non-blocking.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a base test that does not use BPF hooks to test baseline case.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Report bytes/sec sent as well as total bytes. Useful to get rough
idea how different configurations and usage patterns perform with
sockmap.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently for SENDMSG tests first send completes then recv runs. This
does not work well for large data sizes and/or many iterations. So
fork the recv and send handler so that we run both send and recv. In
the future we can add a parameter to do more than a single fork of
tx/rx.

With this we can get many GBps of data which helps exercise the
sockmap code.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When testing BPF programs using sockmap I often want to have more
control over how sendmsg is exercised. This becomes even more useful
as new sockmap program types are added.

This adds a test type option to select type of test to run. Currently,
only "ping" and "sendmsg" are supported, but more can be added as
needed.

The new help argument gives the following,

 Usage: ./sockmap --cgroup <cgroup_path>
 options:
 --help         -h
 --cgroup       -c
 --rate         -r
 --verbose      -v
 --iov_count    -i
 --length       -l
 --test         -t
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

sockmap sample program takes arguments from cmd line but it reads them
in using offsets into the array. Because we want to add more arguments
in the future lets do proper argument handling.

Also refactor code to pull apart sock init and ping/pong test. This
allows us to add new tests in the future.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

mostly revert the previous workaround and make
'dubious pointer arithmetic' test useful again.
Use (ptr - ptr) << const instead of ptr << const to generate large scalar.
The rest stays as before commit 2b36047e.

Fixes: 2b36047e ("selftests/bpf: fix test_align")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Bug: BPF programs and maps related to sockmaps test exist
in memory even after test_maps ends.

This patch fixes it as a short term workaround (sockmap
kernel side needs real fixing) by empyting sockmaps when
test ends.

Fixes: 6f6d33f3 ("bpf: selftests add sockmap tests")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
[ daniel: Note on workaround. ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The test incorrectly doing
mkdir /mnt/cgroup-test-work-dirtest-bpf-based-device-cgroup
instead of
mkdir /mnt/cgroup-test-work-dir/test-bpf-based-device-cgroup

somehow such mkdir succeeds and new directory appears:
/mnt/cgroup-test-work-dir/cgroup-test-work-dirtest-bpf-based-device-cgroup

Later cleanup via nftw("/mnt/cgroup-test-work-dir", ...);
doesn't walk this directory.
"rmdir /mnt/cgroup-test-work-dir" succeeds, but bpf program and
dangling cgroup stays in memory.
That's a separate issue on a cgroup side.
For now fix the test.

Fixes: 37f1ba09 ("selftests/bpf: add a test for device cgroup controller")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_hashmap_walk takes very long time on debug kernel with kasan on.
Reduce the number of iterations in this test without sacrificing
test coverage.
Also add printfs as progress indicator.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 111e6b45 ("selftests/bpf: make test_verifier run most programs")
enables tools/testing/selftests/bpf/test_verifier unit cases to run
via bpf_prog_test_run command. With the latest code base,
test_verifier had one test case failure:

  ...
  #473/p check deducing bounds from const, 2 FAIL retval 1 != 0
  0: (b7) r0 = 1
  1: (75) if r0 s>= 0x1 goto pc+1
   R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
  2: (95) exit

  from 1 to 3: R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
  3: (d5) if r0 s<= 0x1 goto pc+1
   R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
  4: (95) exit

  from 3 to 5: R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
  5: (1f) r1 -= r0
  6: (95) exit
  processed 7 insns (limit 131072), stack depth 0
  ...

The test case does not set return value in the test
structure and hence the return value from the prog run
is assumed to be 0. However, the actual return value is 1.
As a result, the test failed. The fix is to correctly set
the return value in the test structure.

Fixes: 111e6b45 ("selftests/bpf: make test_verifier run most programs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In commit b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map"),
the implemented MAP_GET_NEXT_KEY callback function is guarded with rcu read lock.
In the function body, "kmalloc(size, GFP_USER | __GFP_NOWARN)" is used which may
sleep and violate rcu read lock region requirements. This patch fixed the issue
by using GFP_ATOMIC instead to avoid blocking kmalloc. Tested with
CONFIG_DEBUG_ATOMIC_SLEEP=y as suggested by Eric Dumazet.

Fixes: b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map")
Signed-off-by: Yonghong Song <yhs@fb.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>