- 01 Feb, 2016 1 commit
-
-
Namhyung Kim authored
The total period should be get using hists__total_period() since it takes filtered entries into account. In addition, if callchain mode is 'fractal', the total period should be the entry's period. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1453909257-26015-2-git-send-email-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 Jan, 2016 14 commits
-
-
Arnaldo Carvalho de Melo authored
$ make -C tools/perf build-test make[1]: Entering directory `/home/acme/git/linux/tools/perf' make_pure_O: cd . && make -f Makefile O=/tmp/tmp.mPx0Cmik3f DESTDIR=/tmp/tmp.U0SUmVbtJm make_clean_all_O: cd . && make -f Makefile O=/tmp/tmp.Yl5UzhTU7T DESTDIR=/tmp/tmp.fop1E4jdER clean all make_debug_O: cd . && make -f Makefile O=/tmp/tmp.pMn2ozBoXC DESTDIR=/tmp/tmp.azxhDp5sEp DEBUG=1 make_no_libperl_O: cd . && make -f Makefile O=/tmp/tmp.qJPiINMtA7 DESTDIR=/tmp/tmp.KNMrLeGDxZ NO_LIBPERL=1 <SNIP> More needs to be done to make it more compact, i.e. elide the '-f Makefile', remove that 'cd . &&', move the DESTDIR= and O= to the end, as they don't convey that much information besides the fact that they are being set to some random directory just for this build, move the meat, i.e. the meaningful feature disabling bits to the start, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wir3w3o4f1nmbgcxgnx8cj9c@git.kernel.orgSigned-off-by: -
Hemant Kumar authored
Powerpc provides hcall events that also provides insights into guest behaviour. Enhance perf kvm stat to record and analyze hcall events. - To trace hcall events : perf kvm stat record - To show the results : perf kvm stat report --event=hcall The result shows the number of hypervisor calls from the guest grouped by their respective reasons displayed with the frequency. This patch makes use of two additional tracepoints "kvm_hv:kvm_hcall_enter" and "kvm_hv:kvm_hcall_exit". To map the hcall codes to their respective names, it needs a mapping. Such mapping is added in this patch in book3s_hcalls.h. # pgrep qemu A sample output : 19378 60515 2 VMs running. # perf kvm stat record -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 4.153 MB perf.data.guest (39624 samples) ] # perf kvm stat report -p 60515 --event=hcall Analyze events for all VMs, all VCPUs: HCALL-EVENT Samples Samples% Time% MinTime MaxTime AvgTime H_IPI 822 66.08% 88.10% 0.63us 11.38us 2.05us (+- 1.42%) H_SEND_CRQ 144 11.58% 3.77% 0.41us 0.88us 0.50us (+- 1.47%) H_VIO_SIGNAL 118 9.49% 2.86% 0.37us 0.83us 0.47us (+- 1.43%) H_PUT_TERM_CHAR 76 6.11% 2.07% 0.37us 0.90us 0.52us (+- 2.43%) H_GET_TERM_CHAR 74 5.95% 2.23% 0.37us 1.70us 0.58us (+- 4.77%) H_RTAS 6 0.48% 0.85% 1.10us 9.25us 2.70us (+-48.57%) H_PERFMON 4 0.32% 0.12% 0.41us 0.96us 0.59us (+-20.92%) Total Samples:1244, Total events handled time:1916.69us. Signed-off-by:Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1453962787-15376-4-git-send-email-hemant@linux.vnet.ibm.comSigned-off-by:
-
Hemant Kumar authored
perf kvm can be used to analyze guest exit reasons. This support already exists in x86. Hence, porting it to powerpc. - To trace KVM events : perf kvm stat record If many guests are running, we can track for a specific guest by using --pid as in : perf kvm stat record --pid <pid> - To see the results : perf kvm stat report The result shows the number of exits (from the guest context to host/hypervisor context) grouped by their respective exit reasons with their frequency. Since, different powerpc machines have different KVM tracepoints, this patch discovers the available tracepoints dynamically and accordingly looks for them. If any single tracepoint is not present, this support won't be enabled for reporting. To record, this will fail if any of the events we are looking to record isn't available. Right now, its only supported on PowerPC Book3S_HV architectures. To analyze the different exits, group them and present them (in a slight descriptive way) to the user, we need a mapping between the "exit code" (dumped in the kvm_guest_exit tracepoint data) and to its related Interrupt vector description (exit reason). This patch adds this mapping in book3s_hv_exits.h. It records on two available KVM tracepoints for book3s_hv: "kvm_hv:kvm_guest_exit" and "kvm_hv:kvm_guest_enter". Here is a sample o/p: # pgrep qemu 19378 60515 2 Guests are running on the host. # perf kvm stat record -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 4.153 MB perf.data.guest (39624 samples) ] # perf kvm stat report -p 60515 Analyze events for pid(s) 60515, all VCPUs: VM-EXIT Samples Samples% Time% MinTime MaxTime Avg time SYSCALL 9141 63.67% 7.49% 1.26us 5782.39us 9.87us (+- 6.46%) H_DATA_STORAGE 4114 28.66% 5.07% 1.72us 4597.68us 14.84us (+-20.06%) HV_DECREMENTER 418 2.91% 4.26% 0.70us 30002.22us 122.58us (+-70.29%) EXTERNAL 392 2.73% 0.06% 0.64us 104.10us 1.94us (+-18.83%) RETURN_TO_HOST 287 2.00% 83.11% 1.53us 124240.15us 3486.52us (+-16.81%) H_INST_STORAGE 5 0.03% 0.00% 1.88us 3.73us 2.39us (+-14.20%) Total Samples:14357, Total events handled time:1203918.42us. Signed-off-by:Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Hemant Kumar authored
This patch removes the "const" qualifier from kvm_events_tp declaration to account for the fact that some architectures may need to update this variable dynamically. For instance, powerpc will need to update this variable dynamically depending on the machine type. Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1453962787-15376-2-git-send-email-hemant@linux.vnet.ibm.comSigned-off-by:
-
Hemant Kumar authored
Its better to remove the dependency on uapi/kvm_perf.h to allow dynamic discovery of kvm events (if its needed). To do this, some extern variables have been introduced with which we can keep the generic functions generic. Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by:
-
Wang Nan authored
'perf record' knows whether buildid cache is enabled (via --no-no-buildid-cache) deliberately. Buildid cache can be turned off in some situations. Output switching support needs this feature to turn off buildid cache by default. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-33-git-send-email-wangnan0@huawei.comSigned-off-by:
He Kuang <hekuang@huawei.com> Signed-off-by:
-
Wang Nan authored
Timestamp generation becomes a public available helper. Which will be used by 'perf record', help it output to split output file based on time. For example: perf.data.2015122620363710 perf.data.2015122620364092 perf.data.2015122620365423 ... Signed-off-by:
-
Wang Nan authored
Will Deacon [1] has some question on patch [2]. This patch improves test__bp_signal so we can test: 1. A watchpoint and a breakpoint that fire on the same instruction 2. Nested signals Test result: On x86_64 and ARM64 (result are similar with patch [2] on ARM64): # ./perf test -v signal 17: Test breakpoint overflow signal handler : --- start --- test child forked, pid 10213 count1 1, count2 3, count3 2, overflow 3, overflows_2 3 test child finished with 0 ---- end ---- Test breakpoint overflow signal handler: Ok So at least 2 cases Will doubted are handled correctly. [1] http://lkml.kernel.org/g/20160104165535.GI1616@arm.com [2] http://lkml.kernel.org/g/1450921362-198371-1-git-send-email-wangnan0@huawei.comSigned-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Wang Nan authored
Copying perf to old kernel system results: # perf test bpf 37: Test BPF filter : 37.1: Test basic BPF filtering : FAILED! 37.2: Test BPF prologue generation : Skip However, in case when kernel doesn't support a test case it should return 'Skip', 'FAILED!' should be reserved for kernel tests for when the kernel supports a feature that then fails to work as advertised. This patch checks environment before real testcase. Signed-off-by:
-
Wang Nan authored
There is a nasty confusion that, for kernel module, dso->kernel is not necessary to be DSO_TYPE_KERNEL or DSO_TYPE_GUEST_KERNEL. These two enums are for vmlinux. See thread [1]. We tried to fix this part but it is costy. Code machine__write_buildid_table() is another unfortunate function fall into this trap that, when issuing buildid event for a kernel module, cpumode it gives to the event is PERF_RECORD_MISC_USER, not PERF_RECORD_MISC_KERNEL. However, even with this bug, most of the time it doesn't causes real problem. I find this issue when trying to use a perf before commit 3d39ac53 ("perf machine: No need to have two DSOs lists") to parse a perf.data generated by newest perf. [1] https://lkml.org/lkml/2015/9/21/908Signed-off-by:
-
Mathieu Poirier authored
On some architecture the size of the private header may be dependent on the number of tracers used in the session. As such adding a "struct perf_evlist *" parameter, which should contain all the required information. Also adjusting the existing client of the interface to take the new parameter into account. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: Mike Leach <mike.leach@arm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rabin Vincent <rabin@rab.in> Cc: Tor Jeremiassen <tor@ti.com> Link: http://lkml.kernel.org/r/1452807977-8069-22-git-send-email-mathieu.poirier@linaro.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The 'tools/perf/test/make' makefile has in its default, 'all' target builds that will pollute the source code directory, i.e. that will not use O= variable. The 'build-test' should be run as often as possible, preferrably after each non strictly non-code commit, so speed it up by selecting just the O= targets. Furthermore it tests both the Makefile.perf file, that is normally driven by the main Makefile, and the Makefile, reduce the time in half by having just MK=Makefile, the most usual, tested by 'build-test'. Please run: make -C tools/perf -f tests/make from time to time for testing also the in-place build tests. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.orgSigned-off-by:
-
Wang Nan authored
To prevent the feature check tests to run repeately, one time per 'tests/make' target/test, this patch utilizes the previously introduced 'feature-dump' make target and FEATURES_DUMP variable, making sure that the feature checkers run only once when doing build-test for normal test cases. However, since standard users doesn't reuse features dump result, we'd better give an option to check their behaviors. The above feature should be used to make build-test faster only. Only utilize it for build-test. Signed-off-by:
-
Wang Nan authored
'make feature-dump' should give a stable result, so even 'NO_SOMETHING=1' is given (for babeltrace, if LIBBABELTRACE=1 is not given), we should try to detect those feature and {C,LD}FLAGS. Build or not should be controled independent. Signed-off-by:
-
- 28 Jan, 2016 1 commit
-
-
Jiri Olsa authored
I see problem with test-all case speedup, because it does not comprise checks for 32bits compilations, fix it. The problem could be noticed by calling: make -C tools/perf feature-dump That would end up misdetecting the feature-compile-x32, that, building using 'gcc -mx32' needs stub headers not present in a fedora 23 devel machine and thus fail to compile, but ended up appearing as detected, i.e. present in tools/perf/FEATURE-DUMP as 'feature-compile-x32=1'. With this fix it correctly appears as 'feature-compile-x32=0' and if we uninstall the libc devel files for 32 bits (glibc-devel.i686), then the relevant variable is flipped from 'feature-compile-32=1' to 'feature-compile-32=0'. The same things happened for bionic and libbabeltrace, that were misdetected because the are no tested in test-all.c Reported-and-Tested-by:
-
- 27 Jan, 2016 1 commit
-
-
Wang Nan authored
An i386 binary can be linked correctly even without correct headers. Which causes problem. For exmaple: $ mv /tmp/oxygen_root/usr/include/gnu/stubs-32.h{,.bak} $ make tools/perf Auto-detecting system features: ... dwarf: [ on ] [SNIP] GEN common-cmds.h CC perf-read-vdso32 In file included from /tmp/oxygen_root/usr/include/features.h:388:0, from /tmp/oxygen_root/usr/include/stdio.h:27, from perf-read-vdso.c:1: /tmp/oxygen_root/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory # include <gnu/stubs-32.h> ^ compilation terminated. ... In this patch we checks not only compiler and linker, but also basic headers in test-compile test case, make it fail on a platform lacking correct headers. Signed-off-by:
-
- 26 Jan, 2016 23 commits
-
-
Arnaldo Carvalho de Melo authored
Since it was always checking if the initialization was done, use that branch to do the initialization if not done already. With this we reduce the number of exported globals from these files. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160125212955.GG22501@kernel.orgSigned-off-by:
-
Namhyung Kim authored
The script and data-switch context menu are only meaningful when it deals with a data file. So add a check so that it cannot be shown when perf-top is run. Signed-off-by:
-
Wang Nan authored
Set FEATURE_TESTS to 'all' so all possible feature checkers are executed. Without this setting the output feature dump file miss some feature, for example, liberity. Select all checker so we won't get an incomplete feature dump file. Signed-off-by:
-
Wang Nan authored
Put feature checkers not in original FEATURE_TESTS to a new list and allow subproject select all feature checkers by setting FEATURE_TESTS to 'all'. Signed-off-by:
-
Wang Nan authored
Libbpf should check the target section before doing relocation to ensure the relocation is correct. If not, a bug in LLVM causes an error. See [1]. Also, if an incorrect BPF script uses both global variable and map, global variable whould be treated as map and be relocated without error. This patch saves the id of the map section into obj->efile and compare target section of a relocation symbol against it during relocation. Previous patch introduces a test case about this problem. After this patch: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : Ok # perf test -v BPF ... 37.3: Test BPF relocation checker : ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: Program 'func=sys_write' contains non-map related relo data pointing to section 65522 bpf: failed to load buffer Compile BPF program failed. test child finished with 0 ---- end ---- Test BPF filter subtest 2: Ok [1] https://llvm.org/bugs/show_bug.cgi?id=26243Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Tested-by:
-
Wang Nan authored
There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/Signed-off-by:
-
Arnaldo Carvalho de Melo authored
There are cases where looking at just the next and prev entries is not enough, like with: $ readelf -sW /usr/lib/debug/lib/modules/4.3.3-301.fc23.x86_64/vmlinux | grep ffffffff81065ec0 4979: ffffffff81065ec0 53 FUNC LOCAL DEFAULT 1 try_to_free_pud_page 4980: ffffffff81065ec0 53 FUNC LOCAL DEFAULT 1 try_to_free_pte_page 4981: ffffffff81065ec0 53 FUNC LOCAL DEFAULT 1 try_to_free_pmd_page So just search by name to see if the symbol is in kallsyms. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jj1vlljg7ol4i713l60rt5ai@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To be used in the 'vmlinux matches kallsyms' 'perf test' entry. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-m56g1853lz2c6nhnqxibq4jd@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
Now that we check more strictly what each of the menu entries need, we can stop bailing out when 'sym' is not in the --sort order, instead we let each option be added if what it needs is present. This way, for instance, we can run scripts on all samples, see DSO map details when 'dso' is in the --sort provided, etc. Signed-off-by:
-
Namhyung Kim authored
For consistency with the other sort order checks. Signed-off-by:
-
Namhyung Kim authored
We can't offer a zoom into DSO when a bucket (struct hist_entry) may have samples for more than one DSO, i.e. when 'dso' is not part of the sort order, ditto for 'Map details', fix it. Signed-off-by:
-
Namhyung Kim authored
When this feature was introduced a check was made if there was a resolved symbol under the cursor, it got lost in commit ea7cd592 ("perf hists browser: Split popup menu actions - part 2"), reinstate it. Signed-off-by:
-
Namhyung Kim authored
We can't offer a zoom into thread when a bucket (struct hist_entry) may have samples for more than one thread, i.e. when 'pid' is not part of the sort order, fix it. Signed-off-by:
-
Namhyung Kim authored
Now the UI browsers will be able to offer thread related operations only if the thread is part of the sort order in use, i.e. if hist_entry stats are all for a single thread. Signed-off-by:
-
Taeung Song authored
Explain 'hist.percentage' variable. Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1452253193-30502-7-git-send-email-treeze.taeung@gmail.comSigned-off-by:
-
Taeung Song authored
Explain 'annotate' section and its variables. 'hide_src_code', 'use_offset', 'jump_arrows', 'show_linenr', 'show_nr_jump' and 'show_total_period'. Signed-off-by:
-
Taeung Song authored
Explain 'buildid.dir' variable. Signed-off-by:
-
Taeung Song authored
Explain 'tui' and 'gtk' sections and these variables. 'top', 'report' and 'annotate' Signed-off-by:
-
Taeung Song authored
Explain 'colors' section and its variables, used for The variables for customizing the colors used in the output for the 'report', 'top' and 'annotate' in the TUI, those are: 'top', 'medium', 'normal', 'selected', 'jump_arrows', 'addr' and 'root'. Signed-off-by:
-
Taeung Song authored
USe 'jump_arrows' config name instead of 'code' on 'colors' section. 'colors.code' config is only for jump arrows on assembly code listings i.e. │ ┌──jmp 1333 │ │ xchg %ax,%ax │ │ mov %r15,%r10 │ └─→cmp %r15,%r14 But this config name seems unfit. 'jump_arrows' is more descriptive than 'code'. Signed-off-by: -
Ben Hutchings authored
perf_event_paranoid was only documented in source code and a perf error message. Copy the documentation from the error message to Documentation/sysctl/kernel.txt. perf_cpu_time_max_percent was already documented but missing from the list at the top, so add it there. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20160119213515.GG2637@decadent.org.uk [ Remove reference to external Documentation file, provide info inline, as before ] Signed-off-by:
-
Namhyung Kim authored
The hists__filter_by_xxx functions share same logic with different filters. Factor out the common code into the hists__filter_by_type. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1453252521-24398-2-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
The --exclude-other option sets HIST_FILTER__PARENT bit and it's only set when a hist entry was created. DSO filters don't change this so no need to have the check in hists__filter_by_dso() IMHO. Signed-off-by:
-
