For every IO, memory of PAGE size is allocated for handling NVMe native
PRPS. And in addition to that for every IO (chains need per IO * chain
buffer size, e.g. 38 * 128byte) amount of memory is allocated for chain
buffers.

However, at any point of time; the IO request can be for NVMe target
device (where PRP's page is used for framing PRP's) or can be for SCSI
target device (where chain buffers are used for framing chain
SGE's). This patch modifies the driver to reuse same pre-allocated PRP
page buffers as a chain buffer for IO's targeted for SCSI target
devices. No need to allocate separate buffers for chain SGE's buffers.

Suppose if the number of chain buffers need for IO doesn't fit in the
PRP Page size then driver maintain's separate buffers for those extra
chain buffers that exceeds the PRP page size. For example consider PRP
page size as 4K and chain buffer size as 128 bytes, then number of chain
buffers that can fit in PRP page is 4096/128 => 32. if the number of
chain buffer need per IO exceeds 32; for example consider number of
chains need per IO is 36 then for remaining 4 chain buffer's driver
allocates them individual.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Introduces Chain lookup table/tracker and implements accessing chain
buffer using smid.  Removed link list based access of chain buffer which
requires lock and allocated as many chains needed.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Instead of allocating RDPQ array (This stores the address's of each RDPQ
pools) at run time, now it will be allocated once during driver load
time and same will be reused during host reset operation also (instead
of allocating & freeing this buffer on the fly during every host reset
operation) and then freed during driver unload.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch fixes sparse warnings and bugs on big endian systems.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in module parameter description text

[mkp: applied by hand]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in module parameter description text

[mkp: applied by hand]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in module description text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The sanity check on u->in_connection_align_insertion_frequency is being
performed twice and hence the first check can be removed since it is
redundant. Cleans up cppcheck warning:

drivers/scsi/ibmvscsi/ibmvscsi.c:1711: (warning) Identical inner 'if'
condition is always true.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

All three instance of ->smp_handler deal with highmem backed requests
just fine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

do_gettimeofday() is deprecated since it will stop working in 2038 on
32-bit platforms, leading to incorrect times passed to the firmware.
On 64-bit platforms the current code appears to be fine, as the
calculation passes an 8-bit century number into the firmware that can
represent times long in the future (possibly until 25599).

Using ktime_get_real_seconds() to get a 64-bit seconds value and
time64_to_tm() to convert it into the firmware format greatly simplifies
the ips timekeeping code, makes 32-bit and 64-bit behave the same way
here, and gets us closer to removing the deprecated interfaces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

do_gettimeofday() is deprecated because of the y2038 overflow.  Here, we
use the result to pass into a 32-bit field in the firmware, which still
risks an overflow, but if the firmware is written to expect unsigned
values, it can at least last until y2106, and there is not much we can
do about it.

This changes do_gettimeofday() to ktime_get_real_seconds(), which at
least simplifies the code a bit, and avoids the deprecated
interface. I'm adding a comment about the overflow to document what
happens.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add a driver-api document for target/iSCSI interfaces.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Make documentation on target-supported userspace-I/O design be
usable by kernel-doc by using "DOC:". This is used in the driver-api
Documentation chapter.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

For exported functions that already have near-kernel-doc notation,
fix them to begin with "/**" and make a few corrections so that they
don't have any kernel-doc warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Correct a function parameter's name to eliminate kernel-doc warnings
in drivers/target/target_core_transport.c.

Fixes these kernel-doc warnings: (tested by adding these files to a new
target.rst documentation file)

../drivers/target/target_core_transport.c:1671: warning: No description found for parameter 'fabric_tmr_ptr'
../drivers/target/target_core_transport.c:1671: warning: Excess function parameter 'fabric_context' description in 'target_submit_tmr'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

new_tape_buffer() is never called in atomic context. new_tape_buffer()
is only called by st_probe(), which is only set as ".probe" in struct
scsi_driver.

Despite never getting called from atomic context, new_tape_buffer()
calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which
can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

st_probe() is never called in atomic context. st_probe() is only set as
".probe" in struct scsi_driver.

Despite never getting called from atomic context, st_probe() calls
kzalloc() with GFP_ATOMIC, which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which
can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

On Fujitsu ETERNUS systems, sense code ABORTED COMMAND with ASC/Q C1/01
is used to indicate temporary condition where the storage-internal path
to a target is switched from one controller to another. SCSI commands
that return with this error code must be retried unconditionally
(i.e. without the "maybe_retry" logic in scsi_decide_disposition);
otherwise dm-multipath might initiate a failover from a healthy path
e.g. for REQ_FAILFAST_DEV commands.

Introduce a new blist flag for this case.

[mkp: applied by hand]
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

EMC Symmetrix returns 'internal target error' for a variety of
conditions, most of which will be transient.  So we should always retry
it, even with failfast set.  Otherwise we'd get spurious path flaps with
multipath.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Warn if a device (or the user) sets blist flags which are unknown
or have been removed. This should enable us to reuse freed blist
bits in later releases.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Space for SCSI blist flags is gradually running out. Change the type to
__u64 and fix a checkpatch complaint about symbolic mode flags in
scsi_devinfo.c.

Make checkpatch happy by replacing simple_strtoul() with kstrtoull().
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use the just introduced const_ilog2() macro to avoid sparse errors.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Sparse emits errors about ilog2() in array indices because of the use of
__ilog2_32() and __ilog2_64(), rightly so
(https://www.spinics.net/lists/linux-sparse/msg03471.html).

Create a const_ilog2() variant that works with sparse for this scenario.

(Note: checkpatch.pl complains about missing parentheses, but that
appears to be a false positive. I can get rid of the warning simply by
inserting whitespace, making checkpatch "see" the whole macro).
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is a best effort for estimating on how busy the ring buffer is for
that channel, based on available buffer to write in percentage. It is
still possible that at the time of actual ring buffer write, the space
may not be available due to other processes may be writing at the time.

Selecting a channel based on how full it is can reduce the possibility
that a ring buffer write will fail, and avoid the situation a channel is
over busy.

Now it's possible that storvsc can use a smaller ring buffer size
(e.g. 40k bytes) to take advantage of cache locality.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use new return type vm_fault_t for fault handler in struct
vm_operations_struct.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The target database root directory, dbroot, has defaulted to /var/target
for a while, but its main client, targetcli-fb, has been moving it to
/etc/target for quite some time. With the plethora of target drivers now
appearing, it has become more difficult to initialize this attribute
before use by any child drivers.

If the directory /etc/target exists, use that as the DB root. Otherwise,
fall back to using /var/target.

The ability to override this dbroot attribute still exists via sysfs.
Signed-off-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Rename macros MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN and
MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN to add in missing N in UNKNOWN
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi_io_completion() translates the sense key ILLEGAL REQUEST / ASC 0x21 into
ACTION_FAIL. That means that setting cmd->allowed to zero in sd_zbc_complete()
for this sense code / ASC combination is not necessary. Hence remove the code
that resets cmd->allowed from sd_zbc_complete().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality but makes it clear that it is on
purpose that these fields are 32 bits wide.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The default already is to never bounce, so the call is a no-op.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The default already is to never bounce, so the call is a no-op.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use new return type vm_fault_t for fault handler in struct
vm_operations_struct.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

New combined SCSI driver for all ESP based Zorro SCSI boards for m68k Amiga.

Code largely based on board specific parts of the old drivers (blz1230.c,
blz2060.c, cyberstorm.c, cyberstormII.c, fastlane.c which were removed after
the 2.6 kernel series for lack of maintenance) with contributions by Tuomas
Vainikka (TCQ bug tests and workaround) and Finn Thain (TCQ bugfix by use of
PIO in extended message in transfer).

New Kconfig option and Makefile entries for new Amiga Zorro ESP SCSI driver
included in this patch.

Use DMA transfers wherever possible, with board-specific DMA set-up functions
copied from the old driver code. Three byte reselection messages do appear to
cause DMA timeouts. So wire up a PIO transfer routine for these
instead. esp_reselect_with_tag explicitly sets
esp->cmd_block_dma as target address for the message bytes but PIO
requires a virtual address.  Substiute kernel virtual address
esp->cmd_block in PIO transfer call if DMA address is esp->cmd_block_dma
and phase is message in.

PIO code taken from mac_esp.c where the reselection timeout issue was debugged
and fixed first, with minor macro and function rename.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian T. Steigies <cts@debian.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

SGI/TP9100 is not an RDAC array:
    ^^^
https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235

This partially reverts commit 35204772 ("[SCSI] scsi_dh_rdac :
Consolidate rdac strings together")

[mkp: fixed up the new entries to align with rest of struct]

Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The revision field is currently unused by the devinfo pattern matching
code. Combine two blacklist entries into one.

$ egrep "Generic.*Storage-SMC" /proc/scsi/device_info
'Generic' 'USB Storage-SMC' 0x402
'Generic' 'USB Storage-SMC' 0x402

[mkp: tweaked commit desc]

Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Update the driver version to 12.0.0.2
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>