While hashing out BPF's current_task_under_cgroup helper bits, it came
to discussion that the skb_in_cgroup helper name was suboptimally chosen.

Tejun says:

  So, I think in_cgroup should mean that the object is in that
  particular cgroup while under_cgroup in the subhierarchy of that
  cgroup. Let's rename the other subhierarchy test to under too. I
  think that'd be a lot less confusing going forward.

  [...]

  It's more intuitive and gives us the room to implement the real
  "in" test if ever necessary in the future.

Since this touches uapi bits, we need to change this as long as v4.8
is not yet officially released. Thus, change the helper enum and rename
related bits.

Fixes: 4a482f34 ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
Reference: http://patchwork.ozlabs.org/patch/658500/Suggested-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>

When CONFIG_NET_DSA_HWMON is disabled, we get warnings about two unused
functions whose only callers are all inside of an #ifdef:

drivers/net/dsa/mv88e6xxx.c:3257:12: 'mv88e6xxx_mdio_page_write' defined but not used [-Werror=unused-function]
drivers/net/dsa/mv88e6xxx.c:3244:12: 'mv88e6xxx_mdio_page_read' defined but not used [-Werror=unused-function]

This adds another ifdef around the function definitions. The warnings
appeared after the functions were marked 'static', but the problem
was already there before that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 57d32310 ("net: dsa: mv88e6xxx: fix style issues")
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macsec_notify() loops over the list of macsec devices configured on the
underlying device when this device is being removed.  This list is part
of the rx_handler data.

However, macsec_dellink unregisters the rx_handler and frees the
rx_handler data when the last macsec device is removed from the
underlying device.

Add macsec_common_dellink() to delete macsec devices without
unregistering the rx_handler and freeing the associated data.

Fixes: 960d5848 ("macsec: fix memory leaks around rx_handler (un)registration")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

We've clean skb_array in macvtap_put_queue() but still try to pop from
it during macvtap_sock_destruct(). Fix this use after free by moving
the skb array cleanup to macvtap_sock_destruct() instead.

Fixes: 362899b8 ("macvtap: switch to use skb array")
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The creation of a tunnel vport (geneve, gre, vxlan) brings up a
corresponding netdev, a multi-step operation which can fail.

For example, changing a vxlan vport's netdev state to 'up' binds the
vport's socket to a UDP port - if the binding fails (e.g. due to the
port being in use), the error is currently ignored giving the
appearance that the tunnel vport creation completed successfully.
Signed-off-by: Martynas Pumputis <martynas@weave.works>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/gamc/gmac/
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit cf6f7e1d ("tipc: dump monitor attributes"),
I dereferenced a pointer before checking if its valid.
This is reported by static check Smatch as:
net/tipc/monitor.c:733 tipc_nl_add_monitor_peer()
     warn: variable dereferenced before check 'mon' (see line 731)

In this commit, we check for a valid monitor before proceeding
with any other operation.

Fixes: cf6f7e1d ("tipc: dump monitor attributes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Use mod_timer_pending() to avoid reactivating a dead expectation in
   the h323 conntrack helper, from Liping Zhang.

2) Oneliner to fix a type in the register name defined in the nf_tables
   header.

3) Don't try to look further when we find an inactive elements with no
   descendants in the rbtree set implementation, otherwise we crash.

4) Handle valid zero CSeq in the SIP conntrack helper, from
   Christophe Leroy.

5) Don't display a trailing slash in conntrack helper with no classes
   via /proc/net/nf_conntrack_expect, from Liping Zhang.

6) Fix an expectation leak during creation from the nfqueue path, again
   from Liping Zhang.

7) Validate netlink port ID in verdict message from nfqueue, otherwise
   an injection can be possible. Again from Zhang.

8) Reject conntrack tuples with different transport protocol on
   original and reply tuples, also from Zhang.

9) Validate offset and length in nft_exthdr, make sure they are under
   sizeof(u8), from Laura Garcia Liebana.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the direct assignment of offset and length attributes included in
nft_exthdr structure from u32 data to u8.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Adding fdb entries pointing to the bridge device uses fdb_insert(),
which lacks various checks and does not respect added_by_user flag.

As a result, some inconsistent behavior can happen:
* Adding temporary entries succeeds but results in permanent entries.
* Same goes for "dynamic" and "use".
* Changing mac address of the bridge device causes deletion of
  user-added entries.
* Replacing existing entries looks successful from userspace but actually
  not, regardless of NLM_F_EXCL flag.

Use the same logic as other entries and fix them.

Fixes: 3741873b ("bridge: allow adding of fdb entries pointing to the bridge device")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Disable all interrupts when suspend, they will be enabled
when resume. Otherwise, the suspend/resume process will be
blocked occasionally.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b5a099c6 "net: ethernet: davicom: fix devicetree irq
resource" causes an interrupt storm after the ethernet interface
is activated on S3C24XX platform (ARM non-dt), due to the interrupt
trigger type not being set properly.

It seems, after adding parsing of IRQ flags in commit 7085a740
"drivers: platform: parse IRQ flags from resources", there is no path
for non-dt platforms where irq_set_type callback could be invoked when
we don't pass the trigger type flags to the request_irq() call.

In case of a board where the regression is seen the interrupt trigger
type flags are passed through a platform device's resource and it is
not currently handled properly without passing the irq trigger type
flags to the request_irq() call.  In case of OF an of_irq_get() call
within platform_get_irq() function seems to be ensuring required irq_chip
setup, but there is no equivalent code for non OF/ACPI platforms.

This patch mostly restores irq trigger type setting code which has been
removed in commit ("net: ethernet: davicom: fix devicetree irq resource").

Fixes: b5a099c6 ("net: ethernet: davicom: fix devicetree irq resource")
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The message "803.ad" should be "802.3ad".
Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kmemleak reports following false positive memory leaks for each sk
buffers allocated by CPSW (__netdev_alloc_skb_ip_align()) in
cpsw_ndo_open() and cpsw_rx_handler():

unreferenced object 0xea915000 (size 2048):
  comm "systemd-network", pid 713, jiffies 4294938323 (age 102.180s)
  hex dump (first 32 bytes):
    00 58 91 ea ff ff ff ff ff ff ff ff ff ff ff ff  .X..............
    ff ff ff ff ff ff fd 0f 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<c0108680>] __kmalloc_track_caller+0x1a4/0x230
    [<c0529eb4>] __alloc_skb+0x68/0x16c
    [<c052c884>] __netdev_alloc_skb+0x40/0x104
    [<bf1ad29c>] cpsw_ndo_open+0x374/0x670 [ti_cpsw]
    [<c053c3d4>] __dev_open+0xb0/0x114
    [<c053c690>] __dev_change_flags+0x9c/0x14c
    [<c053c760>] dev_change_flags+0x20/0x50
    [<c054bdcc>] do_setlink+0x2cc/0x78c
    [<c054c358>] rtnl_setlink+0xcc/0x100
    [<c054b34c>] rtnetlink_rcv_msg+0x184/0x224
    [<c056467c>] netlink_rcv_skb+0xa8/0xc4
    [<c054b1c0>] rtnetlink_rcv+0x2c/0x34
    [<c0564018>] netlink_unicast+0x16c/0x1f8
    [<c0564498>] netlink_sendmsg+0x334/0x348
    [<c052015c>] sock_sendmsg+0x1c/0x2c
    [<c05213e0>] SyS_sendto+0xc0/0xe8

unreferenced object 0xec861780 (size 192):
  comm "softirq", pid 0, jiffies 4294938759 (age 109.540s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 b0 5a ed 00 00 00 00 00 00 00 00  ......Z.........
  backtrace:
    [<c0107830>] kmem_cache_alloc+0x190/0x208
    [<c052c768>] __build_skb+0x30/0x98
    [<c052c8fc>] __netdev_alloc_skb+0xb8/0x104
    [<bf1abc54>] cpsw_rx_handler+0x68/0x1e4 [ti_cpsw]
    [<bf11aa30>] __cpdma_chan_free+0xa8/0xc4 [davinci_cpdma]
    [<bf11ab98>] __cpdma_chan_process+0x14c/0x16c [davinci_cpdma]
    [<bf11abfc>] cpdma_chan_process+0x44/0x5c [davinci_cpdma]
    [<bf1adc78>] cpsw_rx_poll+0x1c/0x9c [ti_cpsw]
    [<c0539180>] net_rx_action+0x1f0/0x2ec
    [<c003881c>] __do_softirq+0x134/0x258
    [<c0038a00>] do_softirq+0x68/0x70
    [<c0038adc>] __local_bh_enable_ip+0xd4/0xe8
    [<c0640994>] _raw_spin_unlock_bh+0x30/0x34
    [<c05f4e9c>] igmp6_group_added+0x4c/0x1bc
    [<c05f6600>] ipv6_dev_mc_inc+0x398/0x434
    [<c05dba74>] addrconf_dad_work+0x224/0x39c

This happens because CPSW allocates SK buffers and then passes
pointers on them in CPDMA where they stored in internal CPPI RAM
(SRAM) which belongs to DEV MMIO space. Kmemleak does not scan IO
memory and so reports memory leaks.

Hence, mark allocated sk buffers as false positive explicitly.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When executing the script included below, the netns delete operation
hangs with the following message (repeated at 10 second intervals):

  kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1

This occurs because a reference to the lo interface in the "secure" netns
is still held by a dst entry in the xfrm bundle cache in the init netns.

Address this problem by garbage collecting the tunnel netns flow cache
when a cross-namespace vti interface receives a NETDEV_DOWN notification.

A more detailed description of the problem scenario (referencing commands
in the script below):

(1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1

  The vti_test interface is created in the init namespace. vti_tunnel_init()
  attaches a struct ip_tunnel to the vti interface's netdev_priv(dev),
  setting the tunnel net to &init_net.

(2) ip link set vti_test netns secure

  The vti_test interface is moved to the "secure" netns. Note that
  the associated struct ip_tunnel still has tunnel->net set to &init_net.

(3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1

  The first packet sent using the vti device causes xfrm_lookup() to be
  called as follows:

      dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0);

  Note that tunnel->net is the init namespace, while skb_dst(skb) references
  the vti_test interface in the "secure" namespace. The returned dst
  references an interface in the init namespace.

  Also note that the first parameter to xfrm_lookup() determines which flow
  cache is used to store the computed xfrm bundle, so after xfrm_lookup()
  returns there will be a cached bundle in the init namespace flow cache
  with a dst referencing a device in the "secure" namespace.

(4) ip netns del secure

  Kernel begins to delete the "secure" namespace.  At some point the
  vti_test interface is deleted, at which point dst_ifdown() changes
  the dst->dev in the cached xfrm bundle flow from vti_test to lo (still
  in the "secure" namespace however).
  Since nothing has happened to cause the init namespace's flow cache
  to be garbage collected, this dst remains attached to the flow cache,
  so the kernel loops waiting for the last reference to lo to go away.

<Begin script>
ip link add br1 type bridge
ip link set dev br1 up
ip addr add dev br1 1.1.1.1/8

ip netns add secure
ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1
ip link set vti_test netns secure
ip netns exec secure ip link set vti_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev lo 192.168.100.1/24
ip netns exec secure ip route add 192.168.200.0/24 dev vti_test
ip xfrm policy flush
ip xfrm state flush
ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \
   proto esp mode tunnel mark 1
ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \
   proto esp mode tunnel mark 1
ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \
   mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788
ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \
   mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788

ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1

ip netns del secure
<End script>
Reported-by: Hangbin Liu <haliu@redhat.com>
Reported-by: Jan Tluka <jtluka@redhat.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Miscellaneous fixes

Here are a bunch of miscellaneous fixes to AF_RXRPC:

 (*) Fix an uninitialised pointer.

 (*) Fix error handling when we fail to connect a call.

 (*) Fix a NULL pointer dereference.

 (*) Fix two occasions where a packet is accessed again after being queued
     for someone else to deal with.

 (*) Fix a missing skb free.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Under certain conditions, the data_ready handler will discard a packet.
These need to be freed.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix a use of a packet after it has been enqueued onto the packet processing
queue in the data_ready handler.  Once on a call's Rx queue, we mustn't
touch it any more as it may be dequeued and freed by the call processor
running on a work queue.

Save the values we need before enqueuing.

Without this, we can get an oops like the following:

BUG: unable to handle kernel NULL pointer dereference at 000000000000009c
IP: [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc]
PGD 0 
Oops: 0000 [#1] SMP
Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc]
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G            E   4.7.0-fsdevel+ #1336
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff88040d6863c0 task.stack: ffff88040d68c000
RIP: 0010:[<ffffffffa01854e8>]  [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc]
RSP: 0018:ffff88041fb03a78  EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffff8803ff195b00 RCX: 0000000000000001
RDX: ffffffffa01854d1 RSI: 0000000000000008 RDI: ffff8803ff195b00
RBP: ffff88041fb03ab0 R08: 0000000000000000 R09: 0000000000000001
R10: ffff88041fb038c8 R11: 0000000000000000 R12: ffff880406874800
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000009c CR3: 0000000001c14000 CR4: 00000000001406e0
Stack:
 ffff8803ff195ea0 ffff880408348800 ffff880406874800 ffff8803ff195b00
 ffff880408348800 ffff8803ff195ed8 0000000000000000 ffff88041fb03af0
 ffffffffa0186072 0000000000000000 ffff8804054da000 0000000000000000
Call Trace:
 <IRQ> 
 [<ffffffffa0186072>] rxrpc_data_ready+0x89d/0xbae [af_rxrpc]
 [<ffffffff814c94d7>] __sock_queue_rcv_skb+0x24c/0x2b2
 [<ffffffff8155c59a>] __udp_queue_rcv_skb+0x4b/0x1bd
 [<ffffffff8155e048>] udp_queue_rcv_skb+0x281/0x4db
 [<ffffffff8155ea8f>] __udp4_lib_rcv+0x7ed/0x963
 [<ffffffff8155ef9a>] udp_rcv+0x15/0x17
 [<ffffffff81531d86>] ip_local_deliver_finish+0x1c3/0x318
 [<ffffffff81532544>] ip_local_deliver+0xbb/0xc4
 [<ffffffff81531bc3>] ? inet_del_offload+0x40/0x40
 [<ffffffff815322a9>] ip_rcv_finish+0x3ce/0x42c
 [<ffffffff81532851>] ip_rcv+0x304/0x33d
 [<ffffffff81531edb>] ? ip_local_deliver_finish+0x318/0x318
 [<ffffffff814dff9d>] __netif_receive_skb_core+0x601/0x6e8
 [<ffffffff814e072e>] __netif_receive_skb+0x13/0x54
 [<ffffffff814e082a>] netif_receive_skb_internal+0xbb/0x17c
 [<ffffffff814e1838>] napi_gro_receive+0xf9/0x1bd
 [<ffffffff8144eb9f>] rtl8169_poll+0x32b/0x4a8
 [<ffffffff814e1c7b>] net_rx_action+0xe8/0x357
 [<ffffffff81051074>] __do_softirq+0x1aa/0x414
 [<ffffffff810514ab>] irq_exit+0x3d/0xb0
 [<ffffffff810184a2>] do_IRQ+0xe4/0xfc
 [<ffffffff81612053>] common_interrupt+0x93/0x93
 <EOI> 
 [<ffffffff814af837>] ? cpuidle_enter_state+0x1ad/0x2be
 [<ffffffff814af832>] ? cpuidle_enter_state+0x1a8/0x2be
 [<ffffffff814af96a>] cpuidle_enter+0x12/0x14
 [<ffffffff8108956f>] call_cpuidle+0x39/0x3b
 [<ffffffff81089855>] cpu_startup_entry+0x230/0x35d
 [<ffffffff810312ea>] start_secondary+0xf4/0xf7
Signed-off-by: David Howells <dhowells@redhat.com>

Once a packet has been posted to a connection in the data_ready handler, we
mustn't try reposting if we then find that the connection is dying as the
refcount has been given over to the dying connection and the packet might
no longer exist.

Losing the packet isn't a problem as the peer will retransmit.
Signed-off-by: David Howells <dhowells@redhat.com>

The call state machine processor sets up the message parameters for a UDP
message that it might need to transmit in advance on the basis that there's
a very good chance it's going to have to transmit either an ACK or an
ABORT.  This requires it to look in the connection struct to retrieve some
of the parameters.

However, if the call is complete, the call connection pointer may be NULL
to dissuade the processor from transmitting a message.  However, there are
some situations where the processor is still going to be called - and it's
still going to set up message parameters whether it needs them or not.

This results in a NULL pointer dereference at:

	net/rxrpc/call_event.c:837

To fix this, skip the message pre-initialisation if there's no connection
attached.
Signed-off-by: David Howells <dhowells@redhat.com>

If rxrpc_new_client_call() fails to make a connection, the call record that
it allocated needs to be marked as RXRPC_CALL_RELEASED before it is passed
to rxrpc_put_call() to indicate that it no longer has any attachment to the
AF_RXRPC socket.

Without this, an assertion failure may occur at:

	net/rxrpc/call_object:635
Signed-off-by: David Howells <dhowells@redhat.com>

A newly added bugfix caused an uninitialized variable to be
used for printing debug output. This is harmless as long
as the debug setting is disabled, but otherwise leads to an
immediate crash.

gcc warns about this when -Wmaybe-uninitialized is enabled:

net/rxrpc/call_object.c: In function 'rxrpc_release_call':
net/rxrpc/call_object.c:496:163: error: 'sp' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The initialization was removed but one of the users remains.
This adds back the initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 372ee163 ("rxrpc: Fix races between skb free, ACK generation and replying")
Signed-off-by: David Howells <dhowells@redhat.com>

Currently, user can add a conntrack with different l4proto via nfnetlink.
For example, original tuple is TCP while reply tuple is SCTP. This is
invalid combination, we should report EINVAL to userspace.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict
request when the portid is not same with the initial portid(maybe
from another process).

Fixes: 97d32cf9 ("netfilter: nfnetlink_queue: batch verdict support")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

User can use NFQA_EXP to attach expectations to conntracks, but we
forget to put back nf_conntrack_expect when it is inserted successfully,
i.e. in this normal case, expect's use refcnt will be 3. So even we
unlink it and put it back later, the use refcnt is still 1, then the
memory will be leaked forever.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The 'name' filed in struct nf_conntrack_expect_policy{} is not a
pointer, so check it is NULL or not will always return true. Even if the
name is empty, slash will always be displayed like follows:
  # cat /proc/net/nf_conntrack_expect
  297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/
                                                                        ^

Fixes: 3a8fc53a ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Sudarsana Reddy Kalluru says:

====================
qed: dcbx fix series.

The patch series contains the minor bug fixes for qed dcbx module.
Please consider applying this to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

App count is not updated while adding new app entry to the dcbx app table.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MFW now supports the Selection field for IEEE mode. Add driver changes to
use the newer MFW masks to read/write the port-id value.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtype value is being read incorrectly in ieee-dcbx mode. Use the
correct mfw mask value.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Endian-ness conversion is not needed for priority-to-TC field as the
field is already being read/written by the driver in big-endian way.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 52253db9 ("sctp: also point GSO head_skb to the sk when
it's available") used event->chunk->head_skb to get the head_skb in
sctp_ulpevent_set_owner().

But at that moment, the event->chunk was NULL, as it cloned the skb
in sctp_ulpevent_make_rcvmsg(). Therefore, that patch didn't really
work.

This patch is to move the event->chunk initialization before calling
sctp_ulpevent_receive_data() so that it uses event->chunk when it's
valid.

Fixes: 52253db9 ("sctp: also point GSO head_skb to the sk when it's available")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan driver has bypass for local vxlan traffic, but that
depends on information about all VNIs on local system in
vxlan driver. This is not available in case of LWT.
Therefore following patch disable encap bypass for LWT
vxlan traffic.

Fixes: ee122c79 ("vxlan: Flow based tunneling").
Reported-by: Jakub Libosvar <jlibosva@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LWT user can specify destination as well as source ip address
for given tunnel endpoint. But vxlan is ignoring given source
ip address. Following patch uses both ip address to route the
tunnel packet. This consistent with other LWT implementations,
like GENEVE and GRE.

Fixes: ee122c79 ("vxlan: Flow based tunneling").
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Few BPF helper related checksum fixes

The set contains three fixes with regards to CHECKSUM_COMPLETE
and BPF helper functions. For details please see individual
patches.

Thanks!

v1 -> v2:
  - Fixed make htmldocs issue reported by kbuild bot.
  - Rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When having skbs on ingress with CHECKSUM_COMPLETE, tc BPF programs don't
push rcsum of mac header back in and after BPF run back pull out again as
opposed to some other subsystems (ovs, for example).

For cases like q-in-q, meaning when a vlan tag for offloading is already
present and we're about to push another one, then skb_vlan_push() pushes the
inner one into the skb, increasing mac header and skb_postpush_rcsum()'ing
the 4 bytes vlan header diff. Likewise, for the reverse operation in
skb_vlan_pop() for the case where vlan header needs to be pulled out of the
skb, we're decreasing the mac header and skb_postpull_rcsum()'ing the 4 bytes
rcsum of the vlan header that was removed.

However mangling the rcsum here will lead to hw csum failure for BPF case,
since we're pulling or pushing data that was not part of the current rcsum.
Changing tc BPF programs in general to push/pull rcsum around BPF_PROG_RUN()
is also not really an option since current behaviour is ABI by now, but apart
from that would also mean to do quite a bit of useless work in the sense that
usually 12 bytes need to be rcsum pushed/pulled also when we don't need to
touch this vlan related corner case. One way to fix it would be to push the
necessary rcsum fixup down into vlan helpers that are (mostly) slow-path
anyway.

Fixes: 4e10df9a ("bpf: introduce bpf_skb_vlan_push/pop() helpers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM
flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way.
Where we ran into an issue with bpf_skb_store_bytes() is when we did a
single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM
flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The
underlying issue has been tracked down to a buffer alignment issue.

Meaning, that csum_partial() computations via skb_postpull_rcsum() and
skb_postpush_rcsum() pair invoked had a wrong result since they operated on
an odd address for the hoplimit, while other computations were done on an
even address. This mix doesn't work as-is with skb_postpull_rcsum(),
skb_postpush_rcsum() pair as it always expects at least half-word alignment
of input buffers, which is normally the case. Thus, instead of these helpers
using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(),
csum_block_add(), respectively. For unaligned offsets, they rotate the sum
to align it to a half-word boundary again, otherwise they work the same as
csum_sub() and csum_add().

Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the
offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw
csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers
use a 0 constant for offset so that the compiler optimizes the offset & 1
test away and generates the same code as with csum_sub()/_add().

Fixes: 608cd71a ("tc: bpf: generalize pedit action")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Follow-up to commit f8ffad69 ("bpf: add skb_postpush_rcsum and fix
dev_forward_skb occasions") to fix an issue for dev_queue_xmit() redirect
locations which need CHECKSUM_COMPLETE fixups on ingress.

For the same reasons as described in f8ffad69 already, we of course
also need this here, since dev_queue_xmit() on a veth device will let us
end up in the dev_forward_skb() helper again to cross namespaces.

Latter then calls into skb_postpull_rcsum() to pull out L2 header, so
that netif_rx_internal() sees CHECKSUM_COMPLETE as it is expected. That
is, CHECKSUM_COMPLETE on ingress covering L2 _payload_, not L2 headers.

Also here we have to address bpf_redirect() and bpf_clone_redirect().

Fixes: 3896d655 ("bpf: introduce bpf_clone_redirect() helper")
Fixes: 27b29f63 ("bpf: add bpf_redirect() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The call site for this function appears as:

  #ifdef DEBUG
        data->msg_enable = DEBUG;
        dump_eth_one(dev);
  #endif

...leading to the following warning for !DEBUG builds:

drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function]
 static void dump_eth_one(struct net_device *dev)
             ^

...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig

Put the function definition under the same #ifdef as the call site
to avoid the warning.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: DCB fixes

Patches 1 and 2 fix a problem in which PAUSE frames settings are wrongly
overridden when ieee_setpfc() gets called.

Patch 3 adds a missing rollback in port's creation error path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>