Use the existing weight reporting facility to report the transaction
abort cost, that is the number of cycles wasted in aborts.
Haswell reports this in the PEBS record.

This was in fact the original user for weight.

This is a very useful sort key to concentrate on the most
costly aborts and a good metric for TSX tuning.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378438661-24765-3-git-send-email-andi@firstfloor.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

With checkpointed counters there can be a situation where the counter
is overflowing, aborts the transaction, is set back to a non overflowing
checkpoint, causes interupt. The interrupt doesn't see the overflow
because it has been checkpointed.  This is then a spurious PMI, typically with
a ugly NMI message.  It can also lead to excessive aborts.

Avoid this problem by:

- Using the full counter width for counting counters (earlier patch)

- Forbid sampling for checkpointed counters. It's not too useful anyways,
  checkpointing is mainly for counting. The check is approximate
  (to still handle KVM), but should catch the majority of cases.

- On a PMI always set back checkpointed counters to zero.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378438661-24765-2-git-send-email-andi@firstfloor.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Fengguang Wu reported:

> sparse warnings: (new ones prefixed by >>)
>
> >> arch/x86/kernel/cpu/perf_event_intel.c:901:9: sparse: constant 0x768005ffff is so big it is long
> >> arch/x86/kernel/cpu/perf_event_intel.c:902:9: sparse: constant 0x768005ffff is so big it is long
>
> vim +901 arch/x86/kernel/cpu/perf_event_intel.c
>
>    895	 },
>    896	};
>    897
>    898	static struct extra_reg intel_slm_extra_regs[] __read_mostly =
>    899	{
>    900		/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
>  > 901		INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x768005ffff, RSP_0),
>  > 902		INTEL_UEVENT_EXTRA_REG(0x02b7, MSR_OFFCORE_RSP_1, 0x768005ffff, RSP_1),
>    903		EVENT_EXTRA_END
>    904	};
>    905

Extend those constants to 64 bits.

Reported-by: fengguang.wu@intel.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130909112636.GQ31370@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

There was a bug in the handling of SNB-EP/IVB-EP uncore PCI
fixed counters, e.g., IMC.

It would cause erratic values to be returned for the IMC
clockticks event. This was due to a bogus hwc->config value
which was then written to PCI config space.

The erratic values can be seen via:

  $ perf stat -a -C 0 -e uncore_imc_0/clockticks/ -I 1000 sleep 10

The fixed counter has most fields marked as reserved with
hw reset values of 0. Yet the kernel was defaulting to a
hwc->config = ~0 and that was causing the issues.

This patch sets the hwc->config values for fixed uncore event
to 0. Now, the values of IMC clockticks is correct.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: peterz@infradead.org
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/20130909195350.GA17643@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Currently utask->depth is simply the number of allocated/pending
return_instance's in uprobe_task->return_instances list.

handle_trampoline() should decrement this counter every time we
handle/free an instance, but due to typo it does this only if
->chained == T. This means that in the likely case this counter
is never decremented and the probed task can't report more than
MAX_URETPROBE_DEPTH events.
Reported-by: Mikhail Kulemin <Mikhail.Kulemin@ru.ibm.com>
Reported-by: Hemant Kumar Shaw <hkshaw@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Cc: masami.hiramatsu.pt@hitachi.com
Cc: srikar@linux.vnet.ibm.com
Cc: systemtap@sourceware.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20130911154726.GA8093@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The IvyBridge event CYCLE_ACTIVITY:CYCLES_LDM_PENDING can only
be measured on counters 0-3 when HT is off. When HT is on, you
only have counters 0-3.

If you program it on the eight counters for 1s on a 3GHz
IVB laptop running a noploop, you see:

           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING

Clearly the last 4 values are bogus.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: zheng.z.yan@intel.com
Cc: dhsharp@google.com
Link: http://lkml.kernel.org/r/20130911152222.GA28761@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * Handle perf.data files with no tracepoints in 'perf trace', fixing a
   segfault.

 * Fix up MMAP2 buffer space reservation, a problem that was caught via
   'perf test' consistency tests.

 * Add attr->mmap2 support in the tools, a patch that should've been merged
   together with the kernel counterpart:

     13d7a241 "perf: Add attr->mmap2 attribute to an event".

   Merging it allowed us to catch the MMAP buffer space reservation problem via
   'perf test'. From Stephane Eranian.

   The tools deals with older kernels by disabling this feature, resetting the
   perf_event_attr.mmap2 bit, when -EINVAL is returned by perf_event_open, just
   like with perf_event_attr.{sample_id_all,exclude_{guest,host}}.

   When such fallback happens the perf_missing_features.mmap2 flag is set to
   true and can be used by tooling that strictly needs this feature to check
   for its availability on the running kernel.

 * Make sure we can find PERF_SAMPLE_ID in the variable part of PERF_RECORD_
   ring buffer records in 'perf kvm', where direct manipulation of sample_type
   was being done.

   Fixed by making use of the perf_evlist__set_sample_bit() helper and by
   setting the evlist->id_pos in perf_evlist__open(), from Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The ino_generation field was added in the PERF_RECORD_MMAP2 record in
the 13d7a241 cset but no space for it was allocated, corrupting the
PERF_FORMAT_{TIME,CPU,TID,etc} area (sample_type/sample_id_all), fix it.

Detected with one of the regression tests done by 'perf test':

  [root@sandy ~]# perf test -v 7
   7: Validate PERF_RECORD_* events & perf_sample fields     :
  --- start ---
  61315294449606 0 PERF_RECORD_SAMPLE
  61315294453161 0 PERF_RECORD_SAMPLE
  61315294454441 0 PERF_RECORD_SAMPLE
  61315294455709 0 PERF_RECORD_SAMPLE
  61315295600899 0 PERF_RECORD_COMM: sleep:6500
  27917287430500 342521613 PERF_RECORD_MMAP2 6500/6500: [0x400000(0x7000) @ 0 00:1d 311442 9016]: /usr/bin/sleep
  MMAP2 going backwards in time, prev=61315295600899, curr=27917287430500
  MMAP2 with unexpected cpu, expected 0, got 342521613
  MMAP2 with unexpected pid, expected 6500, got 1701606191
  MMAP2 with unexpected tid, expected 6500, got 28773
  27917287430500 342561333 PERF_RECORD_MMAP2 6500/6500: [0x3b7e000000(0x223000) @ 0 00:1d 309186 9016]: /usr/lib64/ld-2.16.so
  MMAP2 with unexpected cpu, expected 0, got 342561333
  MMAP2 with unexpected pid, expected 6500, got 1932408369
  MMAP2 with unexpected tid, expected 6500, got 111
  27917287430500 342600095 PERF_RECORD_MMAP2 6500/6500: [0x7fffbd7dc000(0x1000) @ 0x7fffbd7dc000 00:00 0 0]: [vdso]
  MMAP2 with unexpected cpu, expected 0, got 342600095
  MMAP2 with unexpected pid, expected 6500, got 1935963739
  MMAP2 with unexpected tid, expected 6500, got 23919
  27917287430500 342882834 PERF_RECORD_MMAP2 6500/6500: [0x3b7e400000(0x3b8000) @ 0 00:1d 309187 9016]: /usr/lib64/libc-2.16.so
  MMAP2 with unexpected cpu, expected 0, got 342882834
  MMAP2 with unexpected pid, expected 6500, got 909192754
  MMAP2 with unexpected tid, expected 6500, got 7303982
  61316297195411 0 PERF_RECORD_EXIT(6500:6500):(6500:6500)
  ---- end ----
  Validate PERF_RECORD_* events & perf_sample fields: FAILED!
  [root@sandy ~]#

After this patch:

  [root@sandy ~]# perf test 7
   7: Validate PERF_RECORD_* events & perf_sample fields     : Ok
  [root@sandy ~]#
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-heeuv986b8ha7whqg4o3he7c@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch adds support for the new PERF_RECORD_MMAP2 record type
exposed by the kernel. This is an extended PERF_RECORD_MMAP record.

It adds for each file-backed mapping the device major, minor number and
the inode number and generation.

This triplet uniquely identifies the source of a file-backed mapping. It
can be used to detect identical virtual mappings between processes, for
instance.

The patch will prefer MMAP2 over MMAP.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1377079825-19057-3-git-send-email-eranian@google.com
[ Cope with 314add6b "Change machine__findnew_thread() to set thread pid",
  fix 'perf test' regression test entry affected,
  use perf_missing_features.mmap2 to fallback to not using .mmap2 in older kernels,
  so that new tools can work with kernels where this feature is not present ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Manipulating the sample_type of an evsel requires the use of:

	perf_evsel__set_sample_bit()
and	perf_evsel__reset_sample_bit()
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378496412-2424-3-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ensure the id_pos is correct when perf_evlist__open() is used.

This fixes a problem introduced in 75562573 that broke 'perf kvm stat
live' in that this tool wasn't updated to use the sample_type bits
setting helpers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378496412-2424-2-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before:

  perf trace -i perf.data
  Segmentation fault (core dumped)
  #

After:

 # perf trace -i perf.data
 Data file does not have raw_syscalls:sys_enter events
 #

When there are no tracepoints in a perf.data file the struct pevent
that contains the list of tracepoints that will be used to lookup the
tracepoint id by name will not be populated, causing a NULL deref.

And we don't need to do all that dance to look at pevents for an entry
with a slighly different name to then lookup the tracepoint by its id on
the evlist, just use the perf_evlist__find_tracepoint_by_name() routine,
that will find the tracepoint, if present.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-egcm21k1e6gcyxpcgjxtmsq3@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * Fix parsing with no sample_id_all bit set, this regression prevents perf
   from reading old perf.data files generated in systems where
   perf_event_attr.sample_id_all isn't available, from Adrian Hunter.

 * Add signal checking to the inner 'perf trace' event processing loop, allowing
   faster response to control+C.

 * Fix formatting of long symbol names removing the hardcoding of a buffer
   size used to format histogram entries, which was truncating the lines.

 * Separate progress bar update when processing events, reducing potentially big
   overhead in not needed TUI progress bar screen updates, from Jiri Olsa.

 * Fix 'perf trace' build in architectures where MAP_32BIT is not defined, from
   Kyle McMartin.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Currently when processing events in the __perf_session__process_events
function we update a progress bar based on the file_size. During the
same processing we update the progress bar from within
flush_sample_queue which is based on number of samples count.

Having 2 different based updates is causing the progress bar to jump
heavily back and forth giving not much usefull info.

Fixing this by keeping only __perf_session__process_events based
progress bar update. And turning on flush_sample_queue progress bar
update only for final flushing.

This reduces the number of time the progress bar update function is
called and it significantly reduces the loading time for TUI, where the
progress bar update takes quite a lot of time.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130905091449.GC1100@krava.brq.redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

MAP_32BIT is defined only on x86... this means perf fails to build on
all other platforms.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130905142947.GA25882@merlin.infradead.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We had a hardcoded buffer for formatting histogram entries, truncating
long symbol names (C++ anyone?).

Fix it by using hists__sort_list_width() before formatting the first
histogram entry to calculate the max lenght needed by traversing the
overheads and columns lists (sort order).
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vdfkkyfdp8rboh7j9344o3ss@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf_evlist__event2evsel() is changed to handle non-sample events
(such as mmap events) that have no id sample appended i.e. when
sample_id_all is not set.

Note that such events have a fixed format, so that the selected event
(evsel) they are associated with is immaterial.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378325897-3840-3-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a test for parsing a non-sample event when there is more than one
selected event but no sample_id_all bit set.

The test fails because of a bug in the evlist logic.  That is fixed in a
separate patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378325897-3840-2-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We were checking for it only after processing all events in the buffer,
delaying processing the termination request for long periods.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9jdbu937curvb35cfzbyss4g@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull x86 spinlock changes from Ingo Molnar:
 "The biggest change here are paravirtualized ticket spinlocks (PV
  spinlocks), which bring a nice speedup on various benchmarks.

  The KVM host side will come to you via the KVM tree"

* 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kvm/guest: Fix sparse warning: "symbol 'klock_waiting' was not declared as static"
  kvm: Paravirtual ticketlocks support for linux guests running on KVM hypervisor
  kvm guest: Add configuration support to enable debug information for KVM Guests
  kvm uapi: Add KICK_CPU and PV_UNHALT definition to uapi
  xen, pvticketlock: Allow interrupts to be enabled while blocking
  x86, ticketlock: Add slowpath logic
  jump_label: Split jumplabel ratelimit
  x86, pvticketlock: When paravirtualizing ticket locks, increment by 2
  x86, pvticketlock: Use callee-save for lock_spinning
  xen, pvticketlocks: Add xen_nopvspin parameter to disable xen pv ticketlocks
  xen, pvticketlock: Xen implementation for PV ticket locks
  xen: Defer spinlock setup until boot CPU setup
  x86, ticketlock: Collapse a layer of functions
  x86, ticketlock: Don't inline _spin_unlock when using paravirt spinlocks
  x86, spinlock: Replace pv spinlocks with pv ticketlocks

Pull x86 SMAP fixes from Ingo Molnar:
 "Fixes for Intel SMAP support, to fix SIGSEGVs during bootup"

* 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Introduce [compat_]save_altstack_ex() to unbreak x86 SMAP
  x86, smap: Handle csum_partial_copy_*_user()

Pull x86 RAS changes from Ingo Molnar:
 "[ The reason for drivers/ updates is that Boris asked for the
    drivers/edac/ changes to go via x86/ras in this cycle ]

  Main changes:

   - AMD CPUs:
      . Add ECC event decoding support for new F15h models
      . Various erratum fixes
      . Fix single-channel on dual-channel-controllers bug.

   - Intel CPUs:
      . UC uncorrectable memory error parsing fix
      . Add support for CMC (Corrected Machine Check) 'FF' (Firmware
        First) flag in the APEI HEST

   - Various cleanups and fixes"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  amd64_edac: Fix incorrect wraparounds
  amd64_edac: Correct erratum 505 range
  cpc925_edac: Use proper array termination
  x86/mce, acpi/apei: Only disable banks listed in HEST if mce is configured
  amd64_edac: Get rid of boot_cpu_data accesses
  amd64_edac: Add ECC decoding support for newer F15h models
  x86, amd_nb: Clarify F15h, model 30h GART and L3 support
  pci_ids: Add PCI device ID functions 3 and 4 for newer F15h models.
  x38_edac: Make a local function static
  i3200_edac: Make a local function static
  x86/mce: Pay no attention to 'F' bit in MCACOD when parsing 'UC' errors
  APEI/ERST: Fix error message formatting
  amd64_edac: Fix single-channel setups
  EDAC: Replace strict_strtol() with kstrtol()
  mce: acpi/apei: Soft-offline a page on firmware GHES notification
  mce: acpi/apei: Add a boot option to disable ff mode for corrected errors
  mce: acpi/apei: Honour Firmware First for MCA banks listed in APEI HEST CMC

Pull x86 platform documentation fix from Ingo Molnar.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi: Correct out-of-date comment of __acpi_map_table()

Pull x86 paravirt changes from Ingo Molnar:
 "Hypervisor signature detection cleanup and fixes - the goal is to make
  KVM guests run better on MS/Hyperv and to generalize and factor out
  the code a bit"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Correctly detect hypervisor
  x86, kvm: Switch to use hypervisor_cpuid_base()
  xen: Switch to use hypervisor_cpuid_base()
  x86: Introduce hypervisor_cpuid_base()

Pull x86 mm changes from Ingo Molnar:
 "Misc smaller fixes:

   - a parse_setup_data() boot crash fix

   - a memblock and an __early_ioremap cleanup

   - turn the always-on CONFIG_ARCH_MEMORY_PROBE=y into a configurable
     option and turn it off - it's an unrobust debug facility, it
     shouldn't be enabled by default"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: avoid remapping data in parse_setup_data()
  x86: Use memblock_set_current_limit() to set limit for memblock.
  mm: Remove unused variable idx0 in __early_ioremap()
  mm/hotplug, x86: Disable ARCH_MEMORY_PROBE by default

Pull x86 relocation changes from Ingo Molnar:
 "This tree contains a single change, ELF relocation handling in C - one
  of the kernel randomization patches that makes sense even without
  randomization present upstream"

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, relocs: Move ELF relocation handling to C

Pull timers/nohz changes from Ingo Molnar:
 "It mostly contains fixes and full dynticks off-case optimizations, by
  Frederic Weisbecker"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  nohz: Include local CPU in full dynticks global kick
  nohz: Optimize full dynticks's sched hooks with static keys
  nohz: Optimize full dynticks state checks with static keys
  nohz: Rename a few state variables
  vtime: Always debug check snapshot source _before_ updating it
  vtime: Always scale generic vtime accounting results
  vtime: Optimize full dynticks accounting off case with static keys
  vtime: Describe overriden functions in dedicated arch headers
  m68k: hardirq_count() only need preempt_mask.h
  hardirq: Split preempt count mask definitions
  context_tracking: Split low level state headers
  vtime: Fix racy cputime delta update
  vtime: Remove a few unneeded generic vtime state checks
  context_tracking: User/kernel broundary cross trace events
  context_tracking: Optimize context switch off case with static keys
  context_tracking: Optimize guest APIs off case with static key
  context_tracking: Optimize main APIs off case with static key
  context_tracking: Ground setup for static key use
  context_tracking: Remove full dynticks' hacky dependency on wide context tracking
  nohz: Only enable context tracking on full dynticks CPUs
  ...

Pull x86 fb changes from Ingo Molnar:
 "This tree includes preparatory patches for SimpleDRM driver support,
  by David Herrmann.  They clean up x86 framebuffer support by creating
  simplefb devices wherever possible.  More background can be found at

     http://lwn.net/Articles/558104/"

* 'x86-fb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev: fbcon: select VT_HW_CONSOLE_BINDING
  fbdev: efifb: bind to efi-framebuffer
  fbdev: vesafb: bind to platform-framebuffer device
  fbdev: simplefb: add common x86 RGB formats
  x86: sysfb: move EFI quirks from efifb to sysfb
  x86: provide platform-devices for boot-framebuffers
  fbdev: simplefb: mark as fw and allocate apertures
  fbdev: simplefb: add init through platform_data

Pull x86 cpu feature fixes from Ingo Molnar:
 "Two small cpufeature support updates"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix override new_cpu_data.x86 with 486
  x86, cpufeature: Use new CC_HAVE_ASM_GOTO

Merge branches 'x86-boot-for-linus' and 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull tiny x86 boot cleanups from Ingo Molnar.

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix a sanity check in printf.c

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Fix warning due to undeclared strlen()

Pull x86/asmlinkage changes from Ingo Molnar:
 "As a preparation for Andi Kleen's LTO patchset (link time
  optimizations using GCC's -flto which build time optimization has
  steadily increased in quality over the past few years and might
  eventually be usable for the kernel too) this tree includes a handful
  of preparatory patches that make function calling convention
  annotations consistent again:

   - Mark every function without arguments (or 64bit only) that is used
     by assembly code with asmlinkage()

   - Mark every function with parameters or variables that is used by
     assembly code as __visible.

  For the vanilla kernel this has documentation, consistency and
  debuggability advantages, for the time being"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asmlinkage: Fix warning in xen asmlinkage change
  x86, asmlinkage, vdso: Mark vdso variables __visible
  x86, asmlinkage, power: Make various symbols used by the suspend asm code visible
  x86, asmlinkage: Make dump_stack visible
  x86, asmlinkage: Make 64bit checksum functions visible
  x86, asmlinkage, paravirt: Add __visible/asmlinkage to xen paravirt ops
  x86, asmlinkage, apm: Make APM data structure used from assembler visible
  x86, asmlinkage: Make syscall tables visible
  x86, asmlinkage: Make several variables used from assembler/linker script visible
  x86, asmlinkage: Make kprobes code visible and fix assembler code
  x86, asmlinkage: Make various syscalls asmlinkage
  x86, asmlinkage: Make 32bit/64bit __switch_to visible
  x86, asmlinkage: Make _*_start_kernel visible
  x86, asmlinkage: Make all interrupt handlers asmlinkage / __visible
  x86, asmlinkage: Change dotraplinkage into __visible on 32bit
  x86: Fix sys_call_table type in asm/syscall.h

Pull x86/asm changes from Ingo Molnar:
 "Main changes:

   - Apply low level mutex optimization on x86-64, by Wedson Almeida
     Filho.

   - Change bitops to be naturally 'long', by H Peter Anvin.

   - Add TSX-NI opcodes support to the x86 (instrumentation) decoder, by
     Masami Hiramatsu.

   - Add clang compatibility adjustments/workarounds, by Jan-Simon
     Möller"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Update uaccess.h comment to reflect clang changes
  x86, asm: Fix a compilation issue with clang
  x86, asm: Extend definitions of _ASM_* with a raw format
  x86, insn: Add new opcodes as of June, 2013
  x86/ia32/asm: Remove unused argument in macro
  x86, bitops: Change bitops to be native operand size
  x86: Use asm-goto to implement mutex fast path on x86-64

Pull x86/apic changes from Ingo Molnar:
 "Smaller fixes"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Check attr against the previous setting when programmed more than once
  x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
  x86/acpi: Fix incorrect sanity check in acpi_register_lapic()

Pull timer changes from Ingo Molnar:
 "Various clocksource driver updates: extend the core with memory mapped
  hardware (mmio) support and add new (ARM) Moxart SoC and sun4i
  hardware support"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: arch_timer: Add support for memory mapped timers
  clocksource: arch_timer: Push the read/write wrappers deeper
  Documentation: Add memory mapped ARM architected timer binding
  clocksource: arch_timer: Pass clock event to set_mode callback
  clocksource: arch_timer: Make register accessors less error-prone
  ARM: clocksource: moxart: documentation: Update device tree bindings document
  ARM: clocksource: moxart: Add bitops.h include
  ARM: clocksource: moxart: documentation: Fix device tree bindings document
  ARM: clocksource: Add support for MOXA ART SoCs
  clocksource: cadence_ttc: Reuse clocksource as sched_clock
  clocksource: cadence_ttc: Remove unused header
  clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
  clocksource: sun4i: Cleanup parent clock setup
  clocksource: sun4i: Remove TIMER_SCAL variable
  clocksource: sun4i: Factor out some timer code
  clocksource: sun4i: Fix the next event code
  clocksource: sun4i: Don't forget to enable the clock we use
  clocksource: sun4i: Add clocksource and sched clock drivers
  clocksource: sun4i: rename AUTORELOAD define to RELOAD
  clocksource: sun4i: Wrap macros arguments in parenthesis
  ...

Pull scheduler changes from Ingo Molnar:
 "Various optimizations, cleanups and smaller fixes - no major changes
  in scheduler behavior"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the sd_parent_degenerate() code
  sched/fair: Rework and comment the group_imb code
  sched/fair: Optimize find_busiest_queue()
  sched/fair: Make group power more consistent
  sched/fair: Remove duplicate load_per_task computations
  sched/fair: Shrink sg_lb_stats and play memset games
  sched: Clean-up struct sd_lb_stat
  sched: Factor out code to should_we_balance()
  sched: Remove one division operation in find_busiest_queue()
  sched/cputime: Use this_cpu_add() in task_group_account_field()
  cpumask: Fix cpumask leak in partition_sched_domains()
  sched/x86: Optimize switch_mm() for multi-threaded workloads
  generic-ipi: Kill unnecessary variable - csd_flags
  numa: Mark __node_set() as __always_inline
  sched/fair: Cleanup: remove duplicate variable declaration
  sched/__wake_up_sync_key(): Fix nr_exclusive tasks which lead to WF_SYNC clearing

Merge branches 'perf-urgent-for-linus' and 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf changes from Ingo Molnar:
 "As a first remark I'd like to point out that the obsolete '-f'
  (--force) option, which has not done anything for several releases,
  has been removed from 'perf record' and related utilities.  Everyone
  please update muscle memory accordingly! :-)

  Main changes on the perf kernel side:

   - Performance optimizations:
        . for trace events, by Steve Rostedt.
        . for time values, by Peter Zijlstra

   - New hardware support:
        . for Intel Silvermont (22nm Atom) CPUs, by Zheng Yan
        . for Intel SNB-EP uncore PMUs, by Zheng Yan

   - Enhanced hardware support:
        . for Intel uncore PMUs: add filter support for QPI boxes, by Zheng Yan

   - Core perf events code enhancements and fixes:
        . for full-nohz feature handling, by Frederic Weisbecker
        . for group events, by Jiri Olsa
        . for call chains, by Frederic Weisbecker
        . for event stream parsing, by Adrian Hunter

   - New ABI details:
        . Add attr->mmap2 attribute, by Stephane Eranian
        . Add PERF_EVENT_IOC_ID ioctl to return event ID, by Jiri Olsa
        . Export u64 time_zero on the mmap header page to allow TSC
          calculation, by Adrian Hunter
        . Add dummy software event, by Adrian Hunter.
        . Add a new PERF_SAMPLE_IDENTIFIER to make samples always
          parseable, by Adrian Hunter.
        . Make Power7 events available via sysfs, by Runzhen Wang.

   - Code cleanups and refactorings:
        . for nohz-full, by Frederic Weisbecker
        . for group events, by Jiri Olsa

   - Documentation updates:
        . for perf_event_type, by Peter Zijlstra

  Main changes on the perf tooling side (some of these tooling changes
  utilize the above kernel side changes):

   - Lots of 'perf trace' enhancements:

        . Make 'perf trace' command line arguments consistent with
          'perf record', by David Ahern.

        . Allow specifying syscalls a la strace, by Arnaldo Carvalho de Melo.

        . Add --verbose and -o/--output options, by Arnaldo Carvalho de Melo.

        . Support ! in -e expressions, to filter a list of syscalls,
          by Arnaldo Carvalho de Melo.

        . Arg formatting improvements to allow masking arguments in
          syscalls such as futex and open, where the some arguments are
          ignored and thus should not be printed depending on other args,
          by Arnaldo Carvalho de Melo.

        . Beautify futex open, openat, open_by_handle_at, lseek and futex
          syscalls, by Arnaldo Carvalho de Melo.

        . Add option to analyze events in a file versus live, so that
          one can do:

           [root@zoo ~]# perf record -a -e raw_syscalls:* sleep 1
           [ perf record: Woken up 0 times to write data ]
           [ perf record: Captured and wrote 25.150 MB perf.data (~1098836 samples) ]
           [root@zoo ~]# perf trace -i perf.data -e futex --duration 1
              17.799 ( 1.020 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, ua
             113.344 (95.429 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 4294967
             133.778 ( 1.042 ms): 18004 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 429496
           [root@zoo ~]#

          By David Ahern.

        . Honor target pid / tid options when analyzing a file, by David Ahern.

        . Introduce better formatting of syscall arguments, including so
          far beautifiers for mmap, madvise, syscall return values,
          by Arnaldo Carvalho de Melo.

        . Handle HUGEPAGE defines in the mmap beautifier, by David Ahern.

   - 'perf report/top' enhancements:

        . Do annotation using /proc/kcore and /proc/kallsyms when
          available, removing the forced need for a vmlinux file kernel
          assembly annotation. This also improves this use case because
          vmlinux has just the initial kernel image, not what is actually
          in use after various code patchings by things like alternatives.
          By Adrian Hunter.

        . Add --ignore-callees=<regex> option to collapse undesired parts
          of call graphs, by Greg Price.

        . Simplify symbol filtering by doing it at machine class level,
          by Adrian Hunter.

        . Add support for callchains in the gtk UI, by Namhyung Kim.

        . Add --objdump option to 'perf top', by Sukadev Bhattiprolu.

   - 'perf kvm' enhancements:

        . Add option to print only events that exceed a specified time
          duration, by David Ahern.

        . Improve stack trace printing, by David Ahern.

        . Update documentation of the live command, by David Ahern

        . Add perf kvm stat live mode that combines aspects of 'perf kvm
          stat' record and report, by David Ahern.

        . Add option to analyze specific VM in perf kvm stat report, by
          David Ahern.

        . Do not require /lib/modules/* on a guest, by Jason Wessel.

   - 'perf script' enhancements:

        . Fix symbol offset computation for some dsos, by David Ahern.

        . Fix named threads support, by David Ahern.

        . Don't install scripting files files when perl/python support
          is disabled, by Arnaldo Carvalho de Melo.

   - 'perf test' enhancements:

        . Add various improvements and fixes to the "vmlinux matches
          kallsyms" 'perf test' entry, related to the /proc/kcore
          annotation feature. By Adrian Hunter.

        . Add sample parsing test, by Adrian Hunter.

        . Add test for reading object code, by Adrian Hunter.

        . Add attr record group sampling test, by Jiri Olsa.

        . Misc testing infrastructure improvements and other details,
          by Jiri Olsa.

   - 'perf list' enhancements:

        . Skip unsupported hardware events, by Namhyung Kim.

        . List pmu events, by Andi Kleen.

   - 'perf diff' enhancements:

        . Add support for more than two files comparison, by Jiri Olsa.

   - 'perf sched' enhancements:

        . Various improvements, including removing reliance on some
          scheduler tracepoints that provide the same information as the
          PERF_RECORD_{FORK,EXIT} events. By David Ahern.

        . Remove odd build stall by moving a large struct initialization
          from a local variable to a global one, by Namhyung Kim.

   - 'perf stat' enhancements:

        . Add --initial-delay option to skip measuring for a defined
          startup phase, by Andi Kleen.

   - Generic perf tooling infrastructure/plumbing changes:

        . Tidy up sample parsing validation, by Adrian Hunter.

        . Fix up jobserver setup in libtraceevent Makefile.
          by Arnaldo Carvalho de Melo.

        . Debug improvements, by Adrian Hunter.

        . Fix correlation of samples coming after PERF_RECORD_EXIT event,
          by David Ahern.

        . Improve robustness of the topology parsing code,
          by Stephane Eranian.

        . Add group leader sampling, that allows just one event in a group
          to sample while the other events have just its values read,
          by Jiri Olsa.

        . Add support for a new modifier "D", which requests that the
          event, or group of events, be pinned to the PMU.
          By Michael Ellerman.

        . Support callchain sorting based on addresses, by Andi Kleen

        . Prep work for multi perf data file storage, by Jiri Olsa.

        . libtraceevent cleanups, by Namhyung Kim.

  And lots and lots of other fixes and code reorganizations that did not
  make it into the list, see the shortlog, diffstat and the Git log for
  details!"

[ Also merge a leftover from the 3.11 cycle ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Prevent race in unthrottling code

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (237 commits)
  perf trace: Tell arg formatters the arg index
  perf trace: Add beautifier for open's flags arg
  perf trace: Add beautifier for lseek's whence arg
  perf tools: Fix symbol offset computation for some dsos
  perf list: Skip unsupported events
  perf tests: Add 'keep tracking' test
  perf tools: Add support for PERF_COUNT_SW_DUMMY
  perf: Add a dummy software event to keep tracking
  perf trace: Add beautifier for futex 'operation' parm
  perf trace: Allow syscall arg formatters to mask args
  perf: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node()
  perf: Export struct perf_branch_entry to userspace
  perf: Add attr->mmap2 attribute to an event
  perf/x86: Add Silvermont (22nm Atom) support
  perf/x86: use INTEL_UEVENT_EXTRA_REG to define MSR_OFFCORE_RSP_X
  perf trace: Handle missing HUGEPAGE defines
  perf trace: Honor target pid / tid options when analyzing a file
  perf trace: Add option to analyze events in a file versus live
  perf evlist: Add tracepoint lookup by name
  perf tests: Add a sample parsing test
  ...

Pull core/locking changes from Ingo Molnar:
 "Main changes:

   - another mutex optimization, from Davidlohr Bueso

   - improved lglock lockdep tracking, from Michel Lespinasse

   - [ assorted smaller updates, improvements, cleanups. ]"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  generic-ipi/locking: Fix misleading smp_call_function_any() description
  hung_task debugging: Print more info when reporting the problem
  mutex: Avoid label warning when !CONFIG_MUTEX_SPIN_ON_OWNER
  mutex: Do not unnecessarily deal with waiters
  mutex: Fix/document access-once assumption in mutex_can_spin_on_owner()
  lglock: Update lockdep annotations to report recursive local locks
  lockdep: Introduce lock_acquire_exclusive()/shared() helper macros

Pull RCU updates from Ingo Molnar:
 "Main RCU changes this cycle were:

   - Full-system idle detection.  This is for use by Frederic
     Weisbecker's adaptive-ticks mechanism.  Its purpose is to allow the
     timekeeping CPU to shut off its tick when all other CPUs are idle.

   - Miscellaneous fixes.

   - Improved rcutorture test coverage.

   - Updated RCU documentation"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  nohz_full: Force RCU's grace-period kthreads onto timekeeping CPU
  nohz_full: Add full-system-idle state machine
  jiffies: Avoid undefined behavior from signed overflow
  rcu: Simplify _rcu_barrier() processing
  rcu: Make rcutorture emit online failures if verbose
  rcu: Remove unused variable from rcu_torture_writer()
  rcu: Sort rcutorture module parameters
  rcu: Increase rcutorture test coverage
  rcu: Add duplicate-callback tests to rcutorture
  doc: Fix memory-barrier control-dependency example
  rcu: Update RTFP documentation
  nohz_full: Add full-system-idle arguments to API
  nohz_full: Add full-system idle states and variables
  nohz_full: Add per-CPU idle-state tracking
  nohz_full: Add rcu_dyntick data for scalable detection of all-idle state
  nohz_full: Add Kconfig parameter for scalable detection of all-idle state
  nohz_full: Add testing information to documentation
  rcu: Eliminate unused APIs intended for adaptive ticks
  rcu: Select IRQ_WORK from TREE_PREEMPT_RCU
  rculist: list_first_or_null_rcu() should use list_entry_rcu()
  ...

Pull pwm changes from Thierry Reding:
 "A set of patches makes the device tree documentation for the various
  PWM drivers more consistent.  Device tree support is added to the
  Renesas TPU driver.  The sysfs interface now makes use of dev_groups.
  Other than that there is a healthy assortment of fixes and
  enhancements for minor issues that have shown up"

* tag 'for-3.12-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pxa: Use module_platform_driver
  pwm: tiehrpwm: add missing __iomem annotation
  pwm: tiecap: add CONFIG_PM_SLEEP to ecap_pwm_{save,restore}_context()
  pwm: simplify use of devm_ioremap_resource
  pwm: renesas-tpu: Add DT support
  ARM: dts: Use the PWM polarity flags
  pwm: Update DT bindings to reference pwm.txt for cells documentation
  pwm: Use the DT macro directly when parsing PWM DT flags
  pwm: Add PWM polarity flag macro for DT
  pwm: mxs: Check the return value from stmp_reset_block()
  pwm: convert class code to use dev_groups

Pull pstore changes from Tony Luck:
 "A big part of this is the addition of compression to the generic
  pstore layer so that all backends can use the pitiful amounts of
  storage they control more effectively.  Three other small
  fixes/cleanups too.

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore/ram: (really) fix undefined usage of rounddown_pow_of_two
  pstore/ram: Read and write to the 'compressed' flag of pstore
  efi-pstore: Read and write to the 'compressed' flag of pstore
  erst: Read and write to the 'compressed' flag of pstore
  powerpc/pseries: Read and write to the 'compressed' flag of pstore
  pstore: Add file extension to pstore file if compressed
  pstore: Add decompression support to pstore
  pstore: Introduce new argument 'compressed' in the read callback
  pstore: Add compression support to pstore
  pstore/Kconfig: Select ZLIB_DEFLATE and ZLIB_INFLATE when PSTORE is selected
  pstore: Add new argument 'compressed' in pstore write callback
  powerpc/pseries: Remove (de)compression in nvram with pstore enabled
  pstore: d_alloc_name() doesn't return an ERR_PTR
  acpi/apei/erst: Add missing iounmap() on error in erst_exec_move_data()