- 20 Oct, 2016 1 commit
-
-
H.J. Lu authored
commit 6d92bc9d upstream. The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X relocation to get the symbol address in PIC. When the compressed x86 kernel isn't built as PIC, the linker optimizes R_386_GOT32X relocations to their fixed symbol addresses. However, when the compressed x86 kernel is loaded at a different address, it leads to the following load failure: Failed to allocate space for phdrs during the decompression stage. If the compressed x86 kernel is relocatable at run-time, it should be compiled with -fPIE, instead of -fPIC, if possible and should be built as Position Independent Executable (PIE) so that linker won't optimize R_386_GOT32X relocation to its fixed symbol address. Older linkers generate R_386_32 relocations against locally defined symbols, _bss, _ebss, _got and _egot, in PIE. It isn't wrong, just less optimal than R_386_RELATIVE. But the x86 kernel fails to properly handle R_386_32 relocations when relocating the kernel. To generate R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as hidden in both 32-bit and 64-bit x86 kernels. To build a 64-bit compressed x86 kernel as PIE, we need to disable the relocation overflow check to avoid relocation overflow errors. We do this with a new linker command-line option, -z noreloc-overflow, which got added recently: commit 4c10bbaa0912742322f10d9d5bb630ba4e15dfa7 Author: H.J. Lu <hjl.tools@gmail.com> Date: Tue Mar 15 11:07:06 2016 -0700 Add -z noreloc-overflow option to x86-64 ld Add -z noreloc-overflow command-line option to the x86-64 ELF linker to disable relocation overflow check. This can be used to avoid relocation overflow check if there will be no dynamic relocation overflow at run-time. The 64-bit compressed x86 kernel is built as PIE only if the linker supports -z noreloc-overflow. So far 64-bit relocatable compressed x86 kernel boots fine even when it is built as a normal executable. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org [ Edited the changelog and comments. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Oct, 2016 22 commits
-
-
Greg Kroah-Hartman authored
-
Jarkko Sakkinen authored
commit 72fd50e1 upstream. The req_canceled() callback is used by tpm_transmit() periodically to check whether the request has been canceled while it is receiving a response from the TPM. The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel callback, which has two consequences: * Cancel might not happen. * req_canceled() always returns zero. A better place to clear the register is when starting to send a new command. The behavior of TPM_CRB_CTRL_CANCEL is described in the section 5.5.3.6 of the PTP specification. Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit d4816edf upstream. Unseal and load operations should be done as an atomic operation. This commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted() can do the locking by itself. Fixes: 0fe54803 ("keys, trusted: seal/unseal with TPM 2.0 chips") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Miklos Szeredi authored
commit e71b9dff upstream. Ima tries to call ->setxattr() on overlayfs dentry after having locked underlying inode, which results in a deadlock. Reported-by:
Krisztian Litkey <kli@iki.fi> Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Jaillet authored
commit af48d7bc upstream. We know that 'ret = 0' because it has been tested a few lines above. So, if 'kzalloc' fails, 0 will be returned instead of an error code. Return -ENOMEM instead. Fixes: a0d46a3d ("ARM: cpuidle: Register per cpuidle device") Signed-off-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Linus Walleij authored
commit ca88696e upstream. The Qualcomm PMIC GPIO and MPP lines are problematic: the are fetched from the main MFD driver with platform_get_irq() which means that at this point they will all be assigned the flags set up for the interrupts in the device tree. That is problematic since these are flagged as rising edge and an this point the interrupt descriptor is assigned a rising edge, while the only thing the GPIO/MPP drivers really do is issue irq_get_irqchip_state() on the line to read it out and to provide a .to_irq() helper for *other* IRQ consumers. If another device tree node tries to flag the same IRQ for use as something else than rising edge, the kernel irqdomain core will protest like this: type mismatch, failed to map hwirq-NN for <FOO>! Which is what happens when the device tree defines two contradictory flags for the same interrupt line. To work around this and alleviate the problem, assign 0 as flag for the interrupts taken by the PM GPIO and MPP drivers. This will lead to the flag being unset, and a second consumer requesting rising, falling, both or level interrupts will be respected. This is what the qcom-pm*.dtsi files already do. Switched to using the symbolic name IRQ_TYPE_NONE so that we get this more readable. Fixes: bce36046 ("ARM: dts: apq8064: add pm8921 mpp support") Fixes: 874443fe ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Grzegorz Jaszczyk authored
commit 061492cf upstream. The armada-390.dtsi was broken since the first patch which adds Device Tree files for Armada 39x SoC was introduced. Signed-off-by:
Grzegorz Jaszczyk <jaz@semihalf.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes 538da83d ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board") Signed-off-by:
-
Josh Poimboeuf authored
commit 72b4f6a5 upstream. On x86_32, when an interrupt happens from kernel space, SS and SP aren't pushed and the existing stack is used. So pt_regs is effectively two words shorter, and the previous stack pointer is normally the memory after the shortened pt_regs, aka '®s->sp'. But in the rare case where the interrupt hits right after the stack pointer has been changed to point to an empty stack, like for example when call_on_stack() is used, the address immediately after the shortened pt_regs is no longer on the stack. In that case, instead of '®s->sp', the previous stack pointer should be retrieved from the beginning of the current stack page. kernel_stack_pointer() wants to do that, but it forgets to dereference the pointer. So instead of returning a pointer to the previous stack, it returns a pointer to the beginning of the current stack. Note that it's probably outside of kernel_stack_pointer()'s scope to be switching stacks at all. The x86_64 version of this function doesn't do it, and it would be better for the caller to do it if necessary. But that's a patch for another day. This just fixes the original intent. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 0788aa6a ("x86: Prepare removal of previous_esp from i386 thread_info structure") Link: http://lkml.kernel.org/r/472453d6e9f6a2d4ab16aaed4935f43117111566.1471535549.git.jpoimboe@redhat.comSigned-off-by:
-
Mika Westerberg authored
commit db91aa79 upstream. When a CPU is about to be offlined we call fixup_irqs() that resets IRQ affinities related to the CPU in question. The same thing is also done when the system is suspended to S-states like S3 (mem). For each IRQ we try to complete any on-going move regardless whether the IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch its chip_data, assume it is of type struct apic_chip_data and manipulate it by clearing old_domain mask etc. For irq_chips that are not part of the x86_vector_domain, like those created by various GPIO drivers, will find their chip_data being changed unexpectly. Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets corrupted after resume: # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in hi # rtcwake -s10 -mmem <10 seconds passes> # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in ? Note '?' in the output. It means the struct gpio_chip ->get function is NULL whereas before suspend it was there. Fix this by first checking that the IRQ belongs to x86_vector_domain before we try to use the chip_data as struct apic_chip_data. Reported-and-tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dan Williams authored
commit 917db484 upstream. In commit: ec776ef6 ("x86/mm: Add support for the non-standard protected e820 type") Christoph references the original patch I wrote implementing pmem support. The intent of the 'max_pfn' changes in that commit were to enable persistent memory ranges to be covered by the struct page memmap by default. However, that approach was abandoned when Christoph ported the patches [1], and that functionality has since been replaced by devm_memremap_pages(). In the meantime, this max_pfn manipulation is confusing kdump [2] that assumes that everything covered by the max_pfn is "System RAM". This results in kdump hanging or crashing. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html [2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098 So fix it. Reported-by:
Zhang Yi <yizhan@redhat.com> Reported-by:
Jeff Moyer <jmoyer@redhat.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
Dan Carpenter authored
commit ac0e89bb upstream. We use logical negate where bitwise negate was intended. It means that we never return -EINVAL here. Fixes: ce11e48b ('KVM: PPC: E500: Add userspace debug stub support') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
James Hogan authored
commit 91e4f1b6 upstream. When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU. Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs. We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
-
Thomas Huth authored
commit fa73c3b2 upstream. The MMCR2 register is available twice, one time with number 785 (privileged access), and one time with number 769 (unprivileged, but it can be disabled completely). In former times, the Linux kernel was using the unprivileged register 769 only, but since commit 8dd75ccb ("powerpc: Use privileged SPR number for MMCR2"), it uses the privileged register 785 instead. The KVM-PR code then of course also switched to use the SPR 785, but this is causing older guest kernels to crash, since these kernels still access 769 instead. So to support older kernels with KVM-PR again, we have to support register 769 in KVM-PR, too. Fixes: 8dd75ccbSigned-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 88003fb1 upstream. This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b8 ("mfd: Add regmap cache support for wm8350") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 9a6dc644 upstream. set_bit() and clear_bit() take the bit number so this code is really doing "1 << (1 << irq)" which is a double shift bug. It's done consistently so it won't cause a problem unless "irq" is more than 4. Fixes: 70c6cce0 ('mfd: Support 88pm80x in 80x driver') Signed-off-by:
-
Boris Brezillon authored
commit 2c2469bc upstream. readl_poll_timeout() calls usleep_range(), but regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap spinlock held). Replace the readl_poll_timeout() call by readl_poll_timeout_atomic(). Fixes: ea31c0cf ("mfd: atmel-hlcdc: Implement config synchronization") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Lu Baolu authored
commit 8dcc5ff8 upstream. Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core. This patch could be backported to stable kernels with version later than v3.14. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Takashi Sakamoto authored
commit 8da08ca0 upstream. Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd ("Staging: add line6 usb driver") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Anssi Hannula authored
commit eb1a74b7 upstream. The DragonFly quirk added in 42e3121d ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB). However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device. This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information. Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise. Fixes: 42e3121d ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Reported-by:
David W <regulars@d-dub.org.uk> Tested-by:
-
Takashi Iwai authored
commit db685779 upstream. The pointer callbacks of ali5451 driver may return the value at the boundary occasionally, and it results in the kernel warning like snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024 It seems that folding the position offset is enough for fixing the warning and no ill-effect has been seen by that. Reported-by:
Enrico Mioso <mrkiko.rs@gmail.com> Tested-by:
-
John Stultz authored
commit 58bfea95 upstream. In commit 27727df2 ("Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code the timekeeping_get_ns() function, but I forgot to include the unit conversion from cycles to nanoseconds, breaking the function's output, which impacts users like perf. This results in bogus perf timestamps like: swapper 0 [000] 253.427536: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426573: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426687: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426800: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426905: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427022: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427127: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427239: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427346: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427463: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 255.426572: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Instead of more reasonable expected timestamps like: swapper 0 [000] 39.953768: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.064839: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.175956: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.287103: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.398217: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.509324: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.620437: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.731546: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.842654: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.953772: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 41.064881: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Add the proper use of timekeeping_delta_to_ns() to convert the cycle delta to nanoseconds as needed. Thanks to Brendan and Alexei for finding this quickly after the v4.8 release. Unfortunately the problematic commit has landed in some -stable trees so they'll need this fix as well. Many apologies for this mistake. I'll be looking to add a perf-clock sanity test to the kselftest timers tests soon. Fixes: 27727df2 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING" Reported-by:
Brendan Gregg <bgregg@netflix.com> Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-and-reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
Christopher S. Hall authored
commit 6bd58f09 upstream. The timekeeping code does not currently provide a way to translate externally provided clocksource cycles to system time. The cycle count is always provided by the result clocksource read() method internal to the timekeeping code. The added function timekeeping_cycles_to_ns() calculated a nanosecond value from a cycle count that can be added to tk_read_base.base value yielding the current system time. This allows clocksource cycle values external to the timekeeping code to provide a cycle count that can be transformed to system time. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by:
Christopher S. Hall <christopher.s.hall@intel.com> Signed-off-by:
-
- 07 Oct, 2016 17 commits
-
-
Greg Kroah-Hartman authored
-
Takashi Iwai authored
commit 0eec8809 upstream. HP Spectre x360 with CX20724 codec has two speaker outputs while the BIOS sets up only the bottom one (NID 0x17) and disables the top one (NID 0x1d). This patch adds a fixup simply defining the proper pincfg for NID 0x1d so that the top speaker works as is. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169071Signed-off-by:
-
Hui Wang authored
commit 3f640970 upstream. One of the laptops has the codec ALC256 on it, applying the ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem, the rest of laptops have the codec ALC295 on them, they are similar to machines with ALC225, applying the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Prarit Bhargava authored
commit a59b679a upstream. ACPICA commit 7bb77313091e52a846df4c9c2bea90be31bfb9d8 Eliminate warnings for "not found" _Sx errors, since these are optional. Original NOT_FOUND status is still returned. Original changes by Prarit Bhargava. ACPICA BZ 1208. Link: https://github.com/acpica/acpica/commit/7bb77313 Link: https://bugs.acpica.org/show_bug.cgi?id=1208Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Hui Wang authored
commit 392c9da2 upstream. We have two new Dell laptop models, they have the same ALC255 pin definition, but not in the pin quirk table yet, as a result, the headset microphone can't work. After adding the definition in the table, the headset microphone works well. Signed-off-by:
-
Greg Kroah-Hartman authored
commit ab21b63e upstream. This reverts commit e6c7efdc. Turns out it was totally wrong. The memory is supposed to be bound to the kref, as the original code was doing correctly, not the device/driver binding as the devm_kzalloc() would cause. This fixes an oops when read would be called after the device was unbound from the driver. Reported-by:
Ladislav Michl <ladis@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Kyle Jones authored
commit decc5360 upstream. Signed-off-by:
Kyle Jones <kyle@kf5jwc.us> Signed-off-by:
-
Ksenija Stanojevic authored
commit fc1e2c8e upstream. Commit 367e8560 introduced a bug in fbtft-core where fps is always 0, this is because variable update_time is not assigned correctly. Signed-off-by:
Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Fixes: 367e8560 ("Staging: fbtbt: Replace timespec with ktime_t") Signed-off-by:
-
Greg Kroah-Hartman authored
commit 2fae9e5a upstream. This patch fixes a NULL pointer dereference caused by a race codition in the probe function of the legousbtower driver. It re-structures the probe function to only register the interface after successfully reading the board's firmware ID. The probe function does not deregister the usb interface after an error receiving the devices firmware ID. The device file registered (/dev/usb/legousbtower%d) may be read/written globally before the probe function returns. When tower_delete is called in the probe function (after an r/w has been initiated), core dev structures are deleted while the file operation functions are still running. If the 0 address is mappable on the machine, this vulnerability can be used to create a Local Priviege Escalation exploit via a write-what-where condition by remapping dev->interrupt_out_buffer in tower_write. A forged USB device and local program execution would be required for LPE. The USB device would have to delay the control message in tower_probe and accept the control urb in tower_open whilst guest code initiated a write to the device file as tower_delete is called from the error in tower_probe. This bug has existed since 2003. Patch tested by emulated device. Reported-by:
James Patrick-Evans <james@jmp-e.com> Tested-by:
-
Konstantin Shkolnyy authored
commit a377f9e9 upstream. A bug in the CRTSCTS handling caused RTS to alternate between CRTSCTS=0 => "RTS is transmit active signal" and CRTSCTS=1 => "RTS is used for receive flow control" instead of CRTSCTS=0 => "RTS is statically active" and CRTSCTS=1 => "RTS is used for receive flow control" This only happened after first having enabled CRTSCTS. Signed-off-by:
Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Fixes: 39a66b8d ("[PATCH] USB: CP2101 Add support for flow control") [johan: reword commit message ] Signed-off-by:
Johan Hovold <johan@kernel.org> [johan: backport to 4.4 ] Signed-off-by:
-
Mikulas Patocka authored
commit 7efb3673 upstream. bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector entries. However, the incoming bio may have more vector entries if it was allocated by other means. For example, bcache submits bios with more than BIO_MAX_PAGES entries. This results in bio_alloc() failure. To avoid the failure, change the code so that it allocates bio with at most BIO_MAX_PAGES entries. If the incoming bio has more entries, bio_add_page() will fail and a new bio will be allocated - the code that handles bio_add_page() failure already exists in the dm-log-writes target. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Loc Ho authored
commit 0f4c7a13 upstream. In the initial fix for non-zero divider shift value, the parenthesis was missing after the negate operation. This patch adds the required parenthesis. Otherwise, lower bits may be cleared unintentionally. Signed-off-by:
Loc Ho <lho@apm.com> Acked-by:
Toan Le <toanle@apm.com> Fixes: 1382ea63 ("clk: xgene: Fix divider with non-zero shift value") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Jann Horn authored
commit 22f6b4d3 upstream. This ensures that do_mmap() won't implicitly make AIO memory mappings executable if the READ_IMPLIES_EXEC personality flag is set. Such behavior is problematic because the security_mmap_file LSM hook doesn't catch this case, potentially permitting an attacker to bypass a W^X policy enforced by SELinux. I have tested the patch on my machine. To test the behavior, compile and run this: #define _GNU_SOURCE #include <unistd.h> #include <sys/personality.h> #include <linux/aio_abi.h> #include <err.h> #include <stdlib.h> #include <stdio.h> #include <sys/syscall.h> int main(void) { personality(READ_IMPLIES_EXEC); aio_context_t ctx = 0; if (syscall(__NR_io_setup, 1, &ctx)) err(1, "io_setup"); char cmd[1000]; sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'", (int)getpid()); system(cmd); return 0; } In the output, "rw-s" is good, "rwxs" is bad. Signed-off-by:
Jann Horn <jann@thejh.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Marek Lindner authored
commit d9f17987 upstream. Reported-by:
Lars Bußmann <ffsoest@kill-you.net> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> [sven@narfation.org: rewritten commit message to make clear that it is an bugfix to an user reported crash] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Jack Morgenstein authored
commit 8ec07bf8 upstream. When sending QP1 MAD packets which use a GRH, the source GID (which consists of the 64-bit subnet prefix, and the 64 bit port GUID) must be included in the packet GRH. For SR-IOV, a GID cache is used, since the source GID needs to be the slave's source GID, and not the Hypervisor's GID. This cache also included a subnet_prefix. Unfortunately, the subnet_prefix field in the cache was never initialized (to the default subnet prefix 0xfe80::0). As a result, this field remained all zeroes. Therefore, when SR-IOV was active, all QP1 packets which included a GRH had a source GID subnet prefix of all-zeroes. However, the subnet-prefix should initially be 0xfe80::0 (the default subnet prefix). In addition, if OpenSM modifies a port's subnet prefix, the new subnet prefix must be used in the GRH when sending QP1 packets. To fix this we now initialize the subnet prefix in the SR-IOV GID cache to the default subnet prefix. We update the cached value if/when OpenSM modifies the port's subnet prefix. We take this cached value when sending QP1 packets when SR-IOV is active. Note that the value is stored as an atomic64. This eliminates any need for locking when the subnet prefix is being updated. Note also that we depend on the FW generating the "port management change" event for tracking subnet-prefix changes performed by OpenSM. If running early FW (before 2.9.4630), subnet prefix changes will not be tracked (but the default subnet prefix still will be stored in the cache; therefore users who do not modify the subnet prefix will not have a problem). IF there is a need for such tracking also for early FW, we will add that capability in a subsequent patch. Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jack Morgenstein authored
commit baa0be70 upstream. The indentation in the QP1 GRH flow in procedure build_mlx_header is really confusing. Fix it, in preparation for a commit which touches this code. Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by:
-
Alex Vesker authored
commit e5ac40cd upstream. Because of an incorrect bit-masking done on the join state bits, when handling a join request we failed to detect a difference between the group join state and the request join state when joining as send only full member (0x8). This caused the MC join request not to be sent. This issue is relevant only when SRIOV is enabled and SM supports send only full member. This fix separates scope bits and join states bits a nibble each. Fixes: b9c5d6a6 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
