Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this Alienware branded Primax mouse as well.

Daniel Schepler (@dschepler) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add the product ID for the 2nd Generation Intuos Pro
Small to the touchring coordinate adjustment block.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Rename the HID documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

While here, fix the sysfs example from hid-sensor.txt, that
has a lot of "?" instead of the proper UTF-8 characters that
are produced by the tree command.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Pull HID fixes from Jiri Kosina:

 - fix for one corner case in HID++ protocol with respect to handling
   very long reports, from Hans de Goede

 - power management fix in Intel-ISH driver, from Hyungwoo Yang

 - use-after-free fix in Intel-ISH driver, from Dan Carpenter

 - a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
   Oleksandr Natalenko

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: fix wrong driver_data usage
  HID: multitouch: Add pointstick support for ALPS Touchpad
  HID: logitech-dj: Fix forwarding of very long HID++ reports
  HID: uclogic: Add support for Huion HS64 tablet
  HID: chicony: add another quirk for PixArt mouse
  HID: intel-ish-hid: Fix a use after free in load_fw_from_host()

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

Pull AFS fixes from David Howells:
 "The in-kernel AFS client has been undergoing testing on opendev.org on
  one of their mirror machines. They are using AFS to hold data that is
  then served via apache, and Ian Wienand had reported seeing oopses,
  spontaneous machine reboots and updates to volumes going missing. This
  patch series appears to have fixed the problem, very probably due to
  patch (2), but it's not 100% certain.

  (1) Fix the printing of the "vnode modified" warning to exclude checks
      on files for which we don't have a callback promise from the
      server (and so don't expect the server to tell us when it
      changes).

      Without this, for every file or directory for which we still have
      an in-core inode that gets changed on the server, we may get a
      message logged when we next look at it. This can happen in bulk
      if, for instance, someone does "vos release" to update a R/O
      volume from a R/W volume and a whole set of files are all changed
      together.

      We only really want to log a message if the file changed and the
      server didn't tell us about it or we failed to track the state
      internally.

  (2) Fix accidental corruption of either afs_vlserver struct objects or
      the the following memory locations (which could hold anything).
      The issue is caused by a union that points to two different
      structs in struct afs_call (to save space in the struct). The call
      cleanup code assumes that it can simply call the cleanup for one
      of those structs if not NULL - when it might be actually pointing
      to the other struct.

      This means that every Volume Location RPC op is going to corrupt
      something.

  (3) Fix an uninitialised spinlock. This isn't too bad, it just causes
      a one-off warning if lockdep is enabled when "vos release" is
      called, but the spinlock still behaves correctly.

  (4) Fix the setting of i_block in the inode. This causes du, for
      example, to produce incorrect results, but otherwise should not be
      dangerous to the kernel"

* tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix setting of i_blocks
  afs: Fix uninitialised spinlock afs_volume::cb_break_lock
  afs: Fix vlserver record corruption
  afs: Fix over zealous "vnode modified" warnings

Pull arch/csky fixup from Guo Ren:
 "A fixup patch for rt_sigframe in signal.c"

* tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux:
  csky: Fixup libgcc unwind error

Pull networking fixes from David Miller:

 1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.

 2) Fix TX completion to be finite, from Sergej Benilov.

 3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
    Long.

 4) Double free of TX cleanup in Dirk van der Merwe.

 5) Memory leak in packet_set_ring(), from Eric Dumazet.

 6) Out of bounds read in qmi_wwan, from Bjørn Mork.

 7) Fix iif used in mcast/bcast looped back packets, from Stephen
    Suryaputra.

 8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
  sctp: change to hold sk after auth shkey is created successfully
  ipv6: fix neighbour resolution with raw socket
  ipv6: constify rt6_nexthop()
  net: dsa: microchip: Use gpiod_set_value_cansleep()
  net: aquantia: fix vlans not working over bridged network
  ipv4: reset rt_iif for recirculated mcast/bcast out pkts
  team: Always enable vlan tx offload
  net/smc: Fix error path in smc_init
  net/smc: hold conns_lock before calling smc_lgr_register_conn()
  bonding: Always enable vlan tx offload
  net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
  ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
  qmi_wwan: Fix out-of-bounds read
  tipc: check msg->req data len in tipc_nl_compat_bearer_disable
  net: macb: do not copy the mac address if NULL
  net/packet: fix memory leak in packet_set_ring()
  net/tls: fix page double free on TX cleanup
  net/sched: cbs: Fix error path of cbs_module_init
  tipc: change to use register_pernet_device
  ...

When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel.  This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).

However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.

We can fix this by converting the schedule call to a completion
mechanism.  By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.

Tested by myself and the reporter, with good results

Change Notes:

V1->V2:
	Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)

V2->V3:
	Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status.  Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)

	Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)

V3->V4:
	Willem has requested that the control flow be restored to the
previous state.  Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call.  This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed.  To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.

	Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
	Clean up some extra newlines (Willem de Bruijn)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,

Here to fix it by only holding the sk when auth shkey is created
successfully.

Fixes: a29a5bd4 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the NO_D3 flag when remove the driver and let device enter
into D3, it will save more power.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Nicolas Dichtel says:

====================
ipv6: fix neighbour resolution with raw socket

The first patch prepares the fix, it constify rt6_nexthop().
The detail of the bug is explained in the second patch.

v1 -> v2:
 - fix compilation warnings
 - split the initial patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The scenario is the following: the user uses a raw socket to send an ipv6
packet, destinated to a not-connected network, and specify a connected nh.
Here is the corresponding python script to reproduce this scenario:

 import socket
 IPPROTO_RAW = 255
 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW)
 # scapy
 # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest()
 # str(p)
 req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00'
 send_s.sendto(req, ('fd00:175::2', 0, 0, 0))

fd00:175::/64 is a connected route and fd00:200::fa is not a connected
host.

With this scenario, the kernel starts by sending a NS to resolve
fd00:175::2. When it receives the NA, it flushes its queue and try to send
the initial packet. But instead of sending it, it sends another NS to
resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If
the user sends again the packet, it now uses the right nh (fd00:175::2).

The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is
:: because the associated route is a connected route, thus it uses the dst
addr of the packet. Let's use rt6_nexthop() to choose the right nh.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no functional change in this patch, it only prepares the next one.

rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch
reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly
fine for the kernel to sleep for a bit in ksz_switch_register().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.

The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.

The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.

Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Multicast or broadcast egress packets have rt_iif set to the oif. These
packets might be recirculated back as input and lookup to the raw
sockets may fail because they are bound to the incoming interface
(skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function
returns rt_iif instead of skb_iif. Hence, the lookup fails.

v2: Make it non vrf specific (David Ahern). Reword the changelog to
    reflect it.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should rather have vlan_tci filled all the way down
to the transmitting netdevice and let it do the hw/sw
vlan implementation.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fixes 2019-06-26

here are 2 small smc fixes for the net tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If register_pernet_subsys success in smc_init,
we should cleanup it in case any other error.

Fixes: 64e28b52 (net/smc: add pnet table namespace support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After smc_lgr_create(), the newly created link group is added
to smc_lgr_list, thus is accessible from other context.
Although link group creation is serialized by
smc_create_lgr_pending, the new link group may still be accessed
concurrently. For example, if ib_device is no longer active,
smc_ib_port_event_work() will call smc_port_terminate(), which
in turn will call __smc_lgr_terminate() on every link group of
this device. So conns_lock is required here.
Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.

Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.

This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Fixes: 278339a4 ("bonding: propogate vlan_features to bonding master")
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.

So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.

The device can be found on HP ZBook 17 G5.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The HID++ spec also defines very long HID++ reports, with a reportid of
0x12. The MX5000 and MX5500 keyboards use 0x12 output reports for sending
messages to display on their buildin LCD.

Userspace (libmx5000) supports this, in order for this to work when talking
to the HID devices instantiated for the keyboard by hid-logitech-dj,
we need to properly forward these reports to the device.

This commit fixes logi_dj_ll_raw_request not forwarding these reports.

Fixes: f2113c30 ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for Huion HS64 drawing tablet to hid-uclogic
Signed-off-by: Kyle Godbey <me@kyle.ee>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add product ID for new MobileStudio Pro.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.

USB ID of this device is 0x04f2:0x0939.

We've introduced quirks like this for other models before, so lets add
this mouse too.

Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linuxSigned-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We have to print the filename first before we can kfree it.

Fixes: 91b22810 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The struct rt_sigframe is also defined in libgcc/config/csky/linux-unwind.h
of gcc. Although there is no use for the first three word space, we must
keep them the same with linux-unwind.h for member position.

The BUG is found in glibc test with the tst-cancel02.
The BUG is from commit:bf241682 of linux-5.2-rc1 merge window.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>

/proc/sys/net/ipv6/route/skip_notify_on_dev_down assumes given value to be
0 or 1. Use proc_dointvec_minmax instead of proc_dointvec.

Fixes: 7c6bb7d2 ("net/ipv6: Add knob to skip DELROUTE message ondevice down")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 19e4e768 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.

Fixes: 19e4e768 ("ipv4: Fix raw socket lookup for local traffic")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.2, round 3:
 - A recent testing by Sébastien discovers that the PWM interrupts of
   i.MX6UL were wrongly coded in device tree.  It's a fix for it.

* tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes

ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull parisc fix from Helge Deller:
 "Add missing PCREL64 relocation in module loader to fix module load
  errors when the static branch and JUMP_LABEL feature is enabled on
  a 64-bit kernel"

* 'parisc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix module loading error with JUMP_LABEL feature

Pull mfd bugfix from Lee Jones.

Fix stmfx type confusion between regmap_read() (which takes an "u32")
and the bitmap operations (which take an "unsigned long" array).

* tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: stmfx: Fix an endian bug in stmfx_irq_handler()
  mfd: stmfx: Uninitialized variable in stmfx_irq_handler()

The syzbot reported

 Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x67/0x231 mm/kasan/report.c:188
  __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
  kasan_report+0xe/0x20 mm/kasan/common.c:614
  qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x660 drivers/base/dd.c:509
  driver_probe_device+0x104/0x210 drivers/base/dd.c:670
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454

Caused by too many confusing indirections and casts.
id->driver_info is a pointer stored in a long.  We want the
pointer here, not the address of it.

Thanks-to: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Fixes: e4bf6348 ("qmi_wwan: Add quirk for Quectel dynamic config")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to fix an uninit-value issue, reported by syzbot:

  BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x191/0x1f0 lib/dump_stack.c:113
    kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
    __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
    memchr+0xce/0x110 lib/string.c:981
    string_is_valid net/tipc/netlink_compat.c:176 [inline]
    tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449
    __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline]
    tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360
    tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline]
    tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281

TLV_GET_DATA_LEN() may return a negtive int value, which will be
used as size_t (becoming a big unsigned long) passed into memchr,
cause this issue.

Similar to what it does in tipc_nl_compat_bearer_enable(), this
fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in
tipc_nl_compat_bearer_disable(), as well as in
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().

v1->v2:
  - add the missing Fixes tags per Eric's request.

Fixes: 0762216c ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable")
Fixes: 8b66fee7 ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats")
Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the MAC address setup in the probe. The MAC address
retrieved using of_get_mac_address was checked for not containing an
error, but it may also be NULL which wasn't tested. Fix it by replacing
IS_ERR with IS_ERR_OR_NULL.

Fixes: 541ddc66 ("net: macb: support of_get_mac_address new ERR_PTR error")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>