- 30 Sep, 2016 23 commits
-
-
Lothar Waßmann authored
commit 38178e7b upstream. commit a894cf6c ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a regression accessing the OOB area from the mxc_nand driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free() functions. They report a bogus oobregion { 64, 7 } which leads to errors accessing bogus data when reading the oob area. Prior to the commit the mtd-oobtest module could be run without any errors. With the offending commit, this test fails with results like: |Running mtd-oobtest | |================================================= |mtd_oobtest: MTD device: 5 |mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64 |mtd_test: scanning for bad eraseblocks |mtd_test: scanned 4 eraseblocks, 0 are bad |mtd_oobtest: test 1 of 5 |mtd_oobtest: writing OOBs of whole device |mtd_oobtest: written up to eraseblock 0 |mtd_oobtest: written 4 eraseblocks |mtd_oobtest: verifying all eraseblocks |mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2 |mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc |mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65 |mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2 |mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c |mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d |mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92 |mtd_oobtest: error: verify failed at 0x0 [...] Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Fixes: a894cf6c ("mtd: nand: mxc: switch to mtd_ooblayout_ops") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Phil Turnbull authored
commit 42857cf5 upstream. The check for writing more than cb_max_size bytes does not 'goto out' so it is a no-op which allows users to vmalloc an arbitrary amount. Fixes: 03607ace ("configfs: implement binary attributes") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
David Daney authored
commit c18df0ad upstream. The wq_numa_init() function makes a private CPU to node map by calling cpu_to_node() early in the boot process, before the non-boot CPUs are brought online. Since the default implementation of cpu_to_node() returns zero for CPUs that have never been brought online, the workqueue system's view is that *all* CPUs are on node zero. When the unbound workqueue for a non-zero node is created, the tsk_cpus_allowed() for the worker threads is the empty set because there are, in the view of the workqueue system, no CPUs on non-zero nodes. The code in try_to_wake_up() using this empty cpumask ends up using the cpumask empty set value of NR_CPUS as an index into the per-CPU area pointer array, and gets garbage as it is one past the end of the array. This results in: [ 0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4 [ 1.970095] pgd = fffffc00094b0000 [ 1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000 [ 1.982610] Internal error: Oops: 96000004 [#1] SMP [ 1.987541] Modules linked in: [ 1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G W 4.8.0-rc6-preempt-vol+ #9 [ 1.999435] Hardware name: Cavium ThunderX CN88XX board (DT) [ 2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000 [ 2.011158] PC is at try_to_wake_up+0x194/0x34c [ 2.015737] LR is at try_to_wake_up+0x150/0x34c [ 2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5 [ 2.027803] sp : fffffe0fe8b8fb10 [ 2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000 [ 2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000 [ 2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200 [ 2.047270] x23: 00000000000000c0 x22: 0000000000000004 [ 2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000 [ 2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000 [ 2.063386] x17: 0000000000000000 x16: 0000000000000000 [ 2.068760] x15: 0000000000000018 x14: 0000000000000000 [ 2.074133] x13: 0000000000000000 x12: 0000000000000000 [ 2.079505] x11: 0000000000000000 x10: 0000000000000000 [ 2.084879] x9 : 0000000000000000 x8 : 0000000000000000 [ 2.090251] x7 : 0000000000000040 x6 : 0000000000000000 [ 2.095621] x5 : ffffffffffffffff x4 : 0000000000000000 [ 2.100991] x3 : 0000000000000000 x2 : 0000000000000000 [ 2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80 [ 2.111737] [ 2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020) [ 2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000) [ 2.125914] fb00: fffffe0fe8b8fb80 fffffc00080e7648 . . . [ 2.442859] Call trace: [ 2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70) [ 2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468 [ 2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64 [ 2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000 [ 2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000 [ 2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4 [ 2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000 [ 2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040 [ 2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018 [ 2.523156] fa60: 0000000000000000 0000000000000000 [ 2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c [ 2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34 [ 2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c [ 2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0 [ 2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4 [ 2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c [ 2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168 [ 2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4 [ 2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148 [ 2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8 [ 2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0 [ 2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50 [ 2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821) [ 2.603464] ---[ end trace 58c0cd36b88802bc ]--- [ 2.608138] Kernel panic - not syncing: Fatal exception Fix by moving call to numa_store_cpu_info() for all CPUs into smp_prepare_cpus(), which happens before wq_numa_init(). Since smp_store_cpu_info() now contains only a single function call, simplify by removing the function and out-lining its contents. Suggested-by:
Robert Richter <rric@kernel.org> Fixes: 1a2db300 ("arm64, numa: Add NUMA support for arm64 platforms.") Signed-off-by:
David Daney <david.daney@cavium.com> Reviewed-by:
Robert Richter <rrichter@cavium.com> Tested-by:
Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Herbert Xu authored
commit 456bee98 upstream. The IV must not be modified by the skcipher operation so we need to duplicate it. Fixes: c3917fd9 ("KEYS: Use skcipher") Reported-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Al Viro authored
commit e23d4159 upstream. Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johannes Weiner authored
commit d979a39d upstream. When a socket is cloned, the associated sock_cgroup_data is duplicated but not its reference on the cgroup. As a result, the cgroup reference count will underflow when both sockets are destroyed later on. Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Link: http://lkml.kernel.org/r/20160914194846.11153-2-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Johannes Weiner authored
commit db2ba40c upstream. During cgroup2 rollout into production, we started encountering css refcount underflows and css access crashes in the memory controller. Splitting the heavily shared css reference counter into logical users narrowed the imbalance down to the cgroup2 socket memory accounting. The problem turns out to be the per-cpu charge cache. Cgroup1 had a separate socket counter, but the new cgroup2 socket accounting goes through the common charge path that uses a shared per-cpu cache for all memory that is being tracked. Those caches are safe against scheduling preemption, but not against interrupts - such as the newly added packet receive path. When cache draining is interrupted by network RX taking pages out of the cache, the resuming drain operation will put references of in-use pages, thus causing the imbalance. Disable IRQs during all per-cpu charge cache operations. Fixes: f7e1cb6e ("mm: memcontrol: account socket memory in unified hierarchy memory controller") Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.orgSigned-off-by:
-
Jan Kara authored
commit 96d41019 upstream. fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
-
Jan Kara authored
commit 12703dbf upstream. Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.czSigned-off-by:
-
Santosh Shilimkar authored
commit c8de641b upstream. Commit 62c230bc ("mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages") replaced the swap_aops dirty hook from __set_page_dirty_no_writeback() with swap_set_page_dirty(). For normal cases without these special SWP flags code path falls back to __set_page_dirty_no_writeback() so the behaviour is expected to be the same as before. But swap_set_page_dirty() makes use of the page_swap_info() helper to get the swap_info_struct to check for the flags like SWP_FILE, SWP_BLKDEV etc as desired for those features. This helper has BUG_ON(!PageSwapCache(page)) which is racy and safe only for the set_page_dirty_lock() path. For the set_page_dirty() path which is often needed for cases to be called from irq context, kswapd() can toggle the flag behind the back while the call is getting executed when system is low on memory and heavy swapping is ongoing. This ends up with undesired kernel panic. This patch just moves the check outside the helper to its users appropriately to fix kernel panic for the described path. Couple of users of helpers already take care of SwapCache condition so I skipped them. Link: http://lkml.kernel.org/r/1473460718-31013-1-git-send-email-santosh.shilimkar@oracle.comSigned-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jens Axboe <axboe@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Brian Foster authored
commit 800b2694 upstream. xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Steven Rostedt authored
commit 377ccbb4 upstream. With the latest gcc compilers, they give a warning if __builtin_return_address() parameter is greater than 0. That is because if it is used by a function called by a top level function (or in the case of the kernel, by assembly), it can try to access stack frames outside the stack and crash the system. The tracing system uses __builtin_return_address() of up to 2! But it is well aware of the dangers that it may have, and has even added precautions to protect against it (see the thunk code in arch/x86/entry/thunk*.S) Linus originally added KBUILD_CFLAGS that would suppress the warning for the entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory wouldn't work. The tracing directory plays a bit with the CFLAGS and requires a little more logic. This adds that special logic to only suppress the warning for the tracing directory. If it is used anywhere else outside of tracing, the warning will still be triggered. Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.homeTested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Linus Torvalds authored
commit 124a3d88 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:
-
Linus Torvalds authored
commit 6e8d666e upstream. Several build configurations had already disabled this warning because it generates a lot of false positives. But some had not, and it was still enabled for "allmodconfig" builds, for example. Looking at the warnings produced, every single one I looked at was a false positive, and the warnings are frequent enough (and big enough) that they can easily hide real problems that you don't notice in the noise generated by -Wmaybe-uninitialized. The warning is good in theory, but this is a classic case of a warning that causes more problems than the warning can solve. If gcc gets better at avoiding false positives, we may be able to re-enable this warning. But as is, we're better off without it, and I want to be able to see the *real* warnings. Signed-off-by:
-
Ian Kent authored
commit 7cbdb4a2 upstream. Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
Junxiao Bi authored
commit 63b52c49 upstream. This reverts commit 38b52efd ("ocfs2: bump up o2cb network protocol version"). This commit made rolling upgrade fail. When one node is upgraded to new version with this commit, the remaining nodes will fail to establish connections to it, then the application like VMs on the remaining nodes can't be live migrated to the upgraded one. This will cause an outage. Since negotiate hb timeout behavior didn't change without this commit, so revert it. Fixes: 38b52efd ("ocfs2: bump up o2cb network protocol version") Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Ashish Samant authored
commit d21c353d upstream. If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reported-by:
Saar Maoz <saar.maoz@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by:
-
Joseph Qi authored
commit e6f0c6e6 upstream. Commit ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Herbert Xu authored
commit 53a5d5dd upstream. The current implementation uses a global per-cpu array to store data which are used to derive the next IV. This is insecure as the attacker may change the stored data. This patch removes all traces of chaining and replaces it with multiplication of the salt and the sequence number. Fixes: a10f554f ("crypto: echainiv - Add encrypted chain IV...") Reported-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Herbert Xu authored
commit acdb04d0 upstream. When we need to allocate a temporary blkcipher_walk_next and it fails, the code is supposed to take the slow path of processing the data block by block. However, due to an unrelated change we instead end up dereferencing the NULL pointer. This patch fixes it by moving the unrelated bsize setting out of the way so that we enter the slow path as inteded. Fixes: 7607bd8f ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Reported-by:
xiakaixu <xiakaixu@huawei.com> Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
commit f82e90b2 upstream. The AES-CTR glue code avoids calling into the blkcipher API for the tail portion of the walk, by comparing the remainder of walk.nbytes modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight into the tail processing block if they are equal. This tail processing block checks whether nbytes != 0, and does nothing otherwise. However, in case of an allocation failure in the blkcipher layer, we may enter this code with walk.nbytes == 0, while nbytes > 0. In this case, we should not dereference the source and destination pointers, since they may be NULL. So instead of checking for nbytes != 0, check for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in non-error conditions. Fixes: 86464859 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions") Reported-by:
-
Ard Biesheuvel authored
commit 2db34e78 upstream. The AES-CTR glue code avoids calling into the blkcipher API for the tail portion of the walk, by comparing the remainder of walk.nbytes modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight into the tail processing block if they are equal. This tail processing block checks whether nbytes != 0, and does nothing otherwise. However, in case of an allocation failure in the blkcipher layer, we may enter this code with walk.nbytes == 0, while nbytes > 0. In this case, we should not dereference the source and destination pointers, since they may be NULL. So instead of checking for nbytes != 0, check for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in non-error conditions. Fixes: 49788fe2 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Reported-by:
-
Jeff Mahoney authored
commit 0a11b9aa upstream. new_insert_key only makes any sense when it's associated with a new_insert_ptr, which is initialized to NULL and changed to a buffer_head when we also initialize new_insert_key. We can key off of that to avoid the uninitialized warning. Link: http://lkml.kernel.org/r/5eca5ffb-2155-8df2-b4a2-f162f105efed@suse.comSigned-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 24 Sep, 2016 17 commits
-
-
Greg Kroah-Hartman authored
-
Guenter Roeck authored
commit 8e4b7205 upstream. Since commit acb2505d ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d ("openrisc: fix copy_from_user()") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit 65c0044c upstream. avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c322 ("avr32: fix copy_from_user()") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by:
Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Linus Torvalds authored
commit 194dc870 upstream. Some of our "for_each_xyz()" macro constructs make gcc unhappy about lack of braces around if-statements inside or outside the loop, because the loop construct itself has a "if-then-else" statement inside of it. The resulting warnings look something like this: drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’: drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (ctx != dev_priv->kernel_context) ^ even if the code itself is fine. Since the warning is fairly easy to avoid by adding a braces around the if-statement near the for_each_xyz() construct, do so, rather than disabling the otherwise potentially useful warning. (The if-then-else statements used in the "for_each_xyz()" constructs are designed to be inherently safe even with no braces, but in this case it's quite understandable that gcc isn't really able to tell that). This finally leaves the standard "allmodconfig" build with just a handful of remaining warnings, so new and valid warnings hopefully will stand out. Signed-off-by:
-
Thomas Gleixner authored
commit 4364e1a2 upstream. virq is not required to be the same for all msi descs. Use the base irq number from the desc in the debug printk. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Arnd Bergmann authored
commit 2cce76c3 upstream. gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Al Viro authored
commit a5e541f7 upstream. Signed-off-by:
-
Al Viro authored
commit 22426465 upstream. should clear on access_ok() failures. Also remove the useless range truncation logics. Signed-off-by:
-
Al Viro authored
commit 917400ce upstream. Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Al Viro authored
commit ae7cc577 upstream. Signed-off-by:
-
Al Viro authored
commit e33d1f6f upstream. Signed-off-by:
-
Al Viro authored
commit acb2505d upstream. ... that should zero on faults. Also remove the <censored> helpful logics wrt range truncation copied from ppc32. Where it had ever been needed only in case of copy_from_user() *and* had not been merged into the mainline until a month after the need had disappeared. A decade before openrisc went into mainline, I might add... Signed-off-by:
-
Al Viro authored
commit aace880f upstream. Signed-off-by:
-
Al Viro authored
commit 8ae95ed4 upstream. Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Al Viro authored
commit 2561d309 upstream. it should clear the destination even when access_ok() fails. Signed-off-by:
-
Al Viro authored
commit 2545e5da upstream. ... in all cases, including the failing access_ok() Note that some architectures using asm-generic/uaccess.h have __copy_from_user() not zeroing the tail on failure halfway through. This variant works either way. Signed-off-by:
-
Al Viro authored
commit e69d7005 upstream. Signed-off-by:
-
