- 05 May, 2007 40 commits
-
-
Michael Chan authored
And fix up the code to always allow MSI on 5714 A2. Call tg3_find_peer() earlier because we need that information before we can determine whether we can set TG3_FLAG_SUPPORT_MSI or not. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
This patch removes the use of the TG3_FLAG_5701_REG_WRITE_BUG flag. It's logic is only used to set a function pointer and thus the logic can be collapsed and the flag removed. [ Comment tidy by Christoph Hellwig. -DaveM ] Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
-
Michael Chan authored
This flag does not do anything useful. Signed-off-by:
-
Michael Chan authored
The reset was added a while back so that ASF could re-init whatever MAC address it wanted to use after the MAC address was changed. Instead of resetting, we can just keep MAC address 1 unchanged during MAC address changes if MAC address 1 is different from MAC address 0. This fixes 2 problems: 1. Bonding calls set_mac_address in contexts that cannot sleep. It no longer sleeps with the chip reset removed. 2. When ASF shares the same MAC address as the NIC, it needs to always do that even when the MAC address is changed. Signed-off-by:
-
Gary Zambrano authored
Change TG3_FLAG_SERDES_WOL_CAP to TG3_FLAG_WOL_CAP to make it easier to manage WoL. This flag is now used consistently during ethtool WoL setup and power setting changes. Signed-off-by:
Gary Zambrano <zambrano@broadcom.com> Signed-off-by:
-
Gary Zambrano authored
The GPIO settings may change during reset and so the stored values in tp->grc_local_ctrl should be cleared first. Signed-off-by:
-
Matt Carlson authored
This patch changes the NVRAM sizing procedure so that the driver can take advantage of devices with 1:1 NVRAM strapping configurations. This is useful in cases where the traditional NVRAM sizing method fails. In the event that the flash size cannot be determined, the largest known NVRAM size is used. The patch also removes support for 5755 NVRAM devices that are not supported by Broadcom and adds explicit sizing for this device. Signed-off-by:
-
Matt Carlson authored
1. Remove the check for skb->len greater than MTU when doing TSO. When the destination has a smaller MSS than the source, a TSO packet may be smaller than the MTU and we still need to process it as a TSO packet. 2. On 5705A3 devices with TSO enabled, the DMA engine can hang due to a hardware bug. This patch avoids the hanging condition by reducing the DMA burst size. Signed-off-by:
-
Jiri Benc authored
Add MAINTAINERS entry for mac80211. Signed-off-by:
Jiri Benc <jbenc@suse.cz> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jiri Benc authored
Export various mac80211 internal variables through debugfs. Signed-off-by:
-
Jiri Benc authored
Add mac80211, the IEEE 802.11 software MAC layer. Signed-off-by:
-
Jiri Benc authored
Add generic IEEE 802.11 definitions. Signed-off-by:
-
Herbert Xu authored
People treating the *_pid fields in netlink as a process ID has caused endless confusion over the years. The fact that our own netlink.h does this only adds to the confusion. So here is a patch to change the comments to refer to it as the port ID which hopefully will make it clear what the purpose of the fields really is. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Heiko Carstens authored
From: Heiko Carstens <heiko.carstens@de.ibm.com> CC [M] net/iucv/af_iucv.o net/iucv/af_iucv.c: In function `iucv_fragment_skb': net/iucv/af_iucv.c:984: error: structure has no member named `h' net/iucv/af_iucv.c:985: error: structure has no member named `nh' net/iucv/af_iucv.c:988: error: incompatible type for argument 1 of `skb_queue_tail' Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (46 commits) mmc-omap: Clean up omap set_ios and make MMC_POWER_ON work mmc-omap: Fix omap to use MMC_POWER_ON mmc-omap: add missing '\n' mmc: make tifm_sd_set_dma_data() static mmc: remove old card states mmc: support unsafe resume of cards mmc: separate out reading EXT_CSD mmc: break apart switch function MMC: Fix handling of low-voltage cards MMC: Consolidate voltage definitions mmc: add bus handler wbsd: check for data opcode earlier mmc: Separate out protocol ops mmc: Move core functions to subdir mmc: deprecate mmc bus topology mmc: remove card upon suspend mmc: allow suspended block driver to be removed mmc: Flush pending detects on host removal mmc: Move host and card drivers to subdirs mmc: Move queue functions to mmc_block ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Force use of GFP_NOFS in ocfs2_write() ocfs2: fix sparse warnings in fs/ocfs2/cluster ocfs2: fix sparse warnings in fs/ocfs2/dlm ocfs2: fix sparse warnings in fs/ocfs2 [PATCH] Copy i_flags to ocfs2 inode flags on write [PATCH] ocfs2: use __set_current_state() ocfs2: Wrap access of directory allocations with ip_alloc_sem. [PATCH] fs/ocfs2/: make 3 functions static ocfs2: Implement compat_ioctl()
-
Linus Torvalds authored
We used to BUG_ON() for a badly mapped IO port, which is certainly correct, but actually made it harder to debug the case where the ATA drivers had incorrectly mapped a nonconnected ATA port. So make badly mapped ports trigger a WARN_ON(), and throw the IO away instead (and return all ones for reads). For things like broken driver initialization - which is the most likely cause anyway - that should mean that the machine comes up and is usable (at least that was the case for the ATA breakage that triggered this patch). It tends to be a whole lot easier to do a "dmesg" on a working machine than to try to capture logs off a dead one. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (28 commits) NFS: Fix a compile glitch on 64-bit systems NFS: Clean up nfs_create_request comments spkm3: initialize hash spkm3: remove bad kfree, unnecessary export spkm3: fix spkm3's use of hmac NFS4: invalidate cached acl on setacl NFS: Fix directory caching problem - with test case and patch. NFS: Set meaningful value for fattr->time_start in readdirplus results. NFS: Added support to turn off the NFSv3 READDIRPLUS RPC. SUNRPC: RPC client should retry with different versions of rpcbind SUNRPC: remove old portmapper NFS: switch NFSROOT to use new rpcbind client SUNRPC: switch the RPC server to use the new rpcbind registration API SUNRPC: switch socket-based RPC transports to use rpcbind SUNRPC: introduce rpcbind: replacement for in-kernel portmapper SUNRPC: Eliminate side effects from rpc_malloc SUNRPC: RPC buffer size estimates are too large NLM: Shrink the maximum request size of NLM4 requests NFS: Use pgoff_t in structures and functions that pass page cache offsets NFS: Clean up nfs_sync_mapping_wait() ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (49 commits) [SCTP]: Set assoc_id correctly during INIT collision. [SCTP]: Re-order SCTP initializations to avoid race with sctp_rcv() [SCTP]: Fix the SO_REUSEADDR handling to be similar to TCP. [SCTP]: Verify all destination ports in sctp_connectx. [XFRM] SPD info TLV aggregation [XFRM] SAD info TLV aggregationx [AF_RXRPC]: Sort out MTU handling. [AF_IUCV/IUCV] : Add missing section annotations [AF_IUCV]: Implementation of a skb backlog queue [NETLINK]: Remove bogus BUG_ON [IPV6]: Some cleanups in include/net/ipv6.h [TCP]: zero out rx_opt in tcp_disconnect() [BNX2]: Fix TSO problem with small MSS. [NET]: Rework dev_base via list_head (v3) [TCP] Highspeed: Limited slow-start is nowadays in tcp_slow_start [BNX2]: Update version and reldate. [BNX2]: Print bus information for PCIE devices. [BNX2]: Add 1-shot MSI handler for 5709. [BNX2]: Restructure PHY event handling. [BNX2]: Add indirect spinlock. ...
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (65 commits) Input: gpio_keys - add support for switches (EV_SW) Input: cobalt_btns - convert to use polldev library Input: add skeleton for simple polled devices Input: update some documentation Input: wistron - fix typo in keymap for Acer TM610 Input: add input_set_capability() helper Input: i8042 - add Fujitsu touchscreen/touchpad PNP IDs Input: i8042 - add Panasonic CF-29 to nomux list Input: lifebook - split into 2 devices Input: lifebook - add signature of Panasonic CF-29 Input: lifebook - activate 6-byte protocol on select models Input: lifebook - work properly on Panasonic CF-18 Input: cobalt buttons - separate device and driver registration Input: ati_remote - make button repeat sensitivity configurable Input: pxa27x - do not use deprecated SA_INTERRUPT flag Input: ucb1400 - make delays configurable Input: misc devices - switch to using input_dev->dev.parent Input: joysticks - switch to using input_dev->dev.parent Input: touchscreens - switch to using input_dev->dev.parent Input: mice - switch to using input_dev->dev.parent ... Fixed up conflicts with core device model removal of "struct subsystem" manually. Signed-off-by: -
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: remove "struct subsystem" as it is no longer needed sysfs: printk format warning DOC: Fix wrong identifier name in Documentation/driver-model/devres.txt platform: reorder platform_device_del Driver core: fix show_uevent from taking up way too much stack
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits) PCI: Free resource files in error path of pci_create_sysfs_dev_files() pci-quirks: disable MSI on RS400-200 and RS480 PCI hotplug: Use menuconfig objects PCI: ZT5550 CPCI Hotplug driver fix PCI: rpaphp: Remove semaphores PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically PCI: rpaphp: Document is_php_dn() PCI: rpaphp: Document find_php_slot() PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot() PCI: rpaphp: refactor tail call to rpaphp_register_slot() PCI: rpaphp: remove rpaphp_set_attention_status() PCI: rpaphp: remove print_slot_pci_funcs() PCI: rpaphp: Remove setup_pci_slot() PCI: rpaphp: remove a call that does nothing but a pointer lookup PCI: rpaphp: Remove another wrappered function PCI: rpaphp: Remve another call that is a wrapper PCI: rpaphp: remove a function that does nothing but wrap debug printks PCI: rpaphp: Remove un-needed goto PCI: rpaphp: Fix a memleak; slot->location string was never freed ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Remove pointless padlock module [CRYPTO] api: Add ablkcipher_request_set_tfm [CRYPTO] cryptd: Add software async crypto daemon [CRYPTO] api: Do not remove users unless new algorithm matches [CRYPTO] cryptomgr: Fix parsing of nested templates [CRYPTO] api: Add async blkcipher type [CRYPTO] templates: Pass type/mask when creating instances [CRYPTO] tcrypt: Use async blkcipher interface [CRYPTO] api: Add async block cipher interface [CRYPTO] api: Proc functions should be marked as unused
-
Geert Uytterhoeven authored
ps3av: Replace GNU extension `__FUNCTION__' by C99 `__func__' Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Geert Uytterhoeven authored
ps3fb: Replace GNU extension `__FUNCTION__' by C99 `__func__' Signed-off-by:
-
Masashi Kimoto authored
ps3: Make `ps3videomode -v 0' (auto mode) work again Signed-off-by:
-
Geert Uytterhoeven authored
ps3av: - Move the definition of struct ps3av to ps3av.c, as it's locally used only. - Kill ps3av.sem, use the existing ps3av.mutex instead. - Make the 512-byte buffer in ps3av_do_pkt() static to reduce stack usage. Its use is protected by a semaphore anyway. Signed-off-by: -
Geert Uytterhoeven authored
ps3fb: kill superfluous zero initializations Signed-off-by:
-
Geert Uytterhoeven authored
ps3av: Replace the kernel_thread and the ping pong semaphores by a singlethread workqueue and a completion. Signed-off-by:
-
Geert Uytterhoeven authored
ps3fb: Use atomic_dec_if_positive() instead of bogus atomic_read()/atomic_dec() combinations Signed-off-by:
-
Geert Uytterhoeven authored
ps3fb: Replace the kernel_thread and the semaphore by a proper kthread, which is simply woken up when the screen must be updated Signed-off-by:
-
Geert Uytterhoeven authored
Convert kmap_atomic() in the non-highmem case from a macro to a static inline function, for better type-checking and the ability to pass void pointers instead of struct page pointers. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
net/rxrpc/af-rxrpc.ko needs csum_partial_copy_from_user Signed-off-by:
-
Geert Uytterhoeven authored
The recent conversion from `memcpy' to `skb_copy_from_linear_data' removed a few casts, which were needed to silence compiler warnings. Re-add them. Signed-off-by:
-
Geert Uytterhoeven authored
Kill resource_size_t warnings by casting resource_size_t to unsigned long when formatting Zorro bus resources, as they are always 32-bit. Signed-off-by:
-
Finn Thain authored
Install the built-in macsonic interrupt handler on both IRQs when using via_alt_mapping. Otherwise the rare interrupt that still comes from the nubus slot will wedge the nubus. $ cat /proc/interrupts auto 2: 89176 via2 auto 3: 744367 sonic auto 4: 0 scc auto 6: 318363 via1 auto 7: 0 NMI mac 9: 119413 framebuffer vbl mac 10: 1971 ADB mac 14: 198517 timer mac 17: 89104 nubus mac 19: 72 Mac ESP SCSI mac 56: 629 sonic mac 62: 1142593 ide0 Version 1 of this patch had a bug where a nubus sonic card would register two interrupt handlers. Only a built-in sonic needs both. Versions 2 and 3 needed some cleanups, as Raylynn Knight and Christoph Hellwig pointed out (thanks). Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
Fix a potential problem in the timeout handling: don't free the DMA buffers before resetting the chip. Also a trivial cleanup. Bring macsonic and jazzsonic into sync. Signed-off-by:
-
Finn Thain authored
Fix a race condition in the transmit code, where the dma interrupt could update the free tx buffer count concurrently and wedge the tx queue. Fix the misuse of the rx frame status and rx frame length registers: no more "fifo overrun" errors caused by the OFLOW bit being tested in the frame length register (instead of the status register), and no more missed packets due to incorrect length taken from status register (instead of the frame length register). Fix a panic (skb_over_panic BUG) caused by allocating and then copying an incoming packet while the packet length register was changing. Cut-and-paste the reset code from the powermac mace driver (mace.c), so the NIC functions when MacOS does not initialise it (important for anyone wanting to use the Emile boot loader). Cut-and-paste the error counting and timeout recovery code from mace.c. Fix over allocation of rx buffer memory (it's page order, not page count). Converted to driver model. Converted to DMA API. Since I've run out of ways to make it fail, and since it performs well now, promote the driver from EXPERIMENTAL status. Tested on both quadra 840av and 660av. Signed-off-by:
-
Finn Thain authored
Fix the flakiness in the CUDA ADB driver on m68k macs (keypresses getting wedged down or ADB just going AWOL altogether). The only IRQ used by this driver is the VIA shift register IRQ. The PowerMac conditional code disables the other VIA IRQ sources, so don't mess with the other IRQ flags in the common code -- m68k macs need them. When polling, don't disable local interrupts when we only need to disable the CUDA interrupt. Unless polling, don't clear the shift register IRQ flag. On m68k macs this creates a race that often breaks CUDA ADB. Tested on Quadra 840av and LC630 (both m68k); also Beige G3 (powerpc). Signed-off-by:
-
Finn Thain authored
Fix a crash caused by requests placed in the queue with the completed flag already set. This lead to some ADB_SYNC requests returning early and their request structs being popped off the stack while still queued. Stack corruption ensued or an invalid request callback pointer was invoked or both. Eliminate macii_retransmit() and its buggy implementation of macii_write(). Have macii_queue_poll() fully initialise the request queues. Fix a bug in macii_queue_poll() where the last_req pointer was not being set. This caused some requests to leave the queue before being completed (and would also corrupt the stack under certain conditions). Fix a race in macii_start that could set the state machine to "reading" while current_req was null. No longer send poll commands with the ADBREQ_REPLY flag -- doing that caused the replies to be stored in the request buffer where they were forgotten about. Don't autopoll by continuously sending new Talk commands. Get the controller to do that for us. This reduces the ADB interrupt rate on an idle bus to about 5 per second. Only autopoll the devices that were probed. Explicitly clear the interrupt flag when polling. Use disable_irq rather than local_irq_save when polling. Remove excess local_irq_save/restore pairs. Improve bus timeout and service request detection. Remove unused code (last_reply, adb_dir etc) and unneeded code (prefix_len, first_byte etc). Change TIP and TACK to their correct names on this ADB controller (ST_EVEN and ST_ODD). Add some commentry. Add a generous quantity of sanity checks (BUG_ONs). Let m68k macs use the adb_sync boot param too. Tested on Mac II, Mac IIci, Quadra 650, Quadra 700 etc. Signed-off-by:
-
