Skip to content

L
linux
Switch branch/tag
  1. 14 Jan, 2020 3 commits
  3. 13 Jan, 2020 7 commits
    • Takashi Iwai's avatar
      ALSA: hda: Manage concurrent reg access more properly · 1a462be5
      Takashi Iwai authored 
      In the commit 8e85def5 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses.  It was a
temporary workaround, and there are still a few opened races even
after the revert.  In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.

First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers.  The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function.  Also, this assures the protection for the accesses without
regmap, too.

The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code.  The
non-regmap case is still open-coded but it's an easy part.  The all
read and write operations are in the single mutex protection, so it's
now race-free.

In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync().  Both
are called from HD-audio legacy driver.  The former is to initialize
the given verb bits but only once when it's not initialized yet.  Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.

And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro.  It's just for simplification because
the code logic is identical among all those functions.
Tested-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.deSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      1a462be5
    • Alexander Tsoy's avatar
      ALSA: usb-audio: Add boot quirk for MOTU M Series · 73ac9f5e
      Alexander Tsoy authored 
      Add delay to make sure that audio urbs are not sent too early.
Otherwise the device hangs. Windows driver makes ~2s delay, so use
about the same time delay value.

snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
is an overkill. Thus a quirk that is called only once is implemented.

Also send two vendor-specific control messages before and after
the delay. This behaviour is blindly copied from the Windows driver.
Signed-off-by: default avatarAlexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200112102358.18085-1-alexander@tsoy.meSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      73ac9f5e
    • Takashi Sakamoto's avatar
      ALSA: dice: add support for Alesis MasterControl · 791a485f
      Takashi Sakamoto authored 
      Alesis MasterControl was shipped 2009 and already discontinued. This model
consists of:
 * TSB41AB2 for physical layer of IEEE 1394
 * WaveFront Dice II STD for link layer and protocol implementation
 * FreeScale DSPB56374AE

Although the firmware of this model can respond against read transaction
to address space for TCAT extension protocol, the content is not valid
for protocol extension. This results in sound card without any PCM/MIDI
interfaces.

$ ./firewire-request /dev/fw1 read 0xffffe0200000 0x48
result: 000: 00 00 00 20 00 00 04 94 00 00 04 b4 00 00 00 b4
result: 010: 00 00 05 68 00 00 00 24 00 00 05 8c 00 00 00 48
result: 020: 00 00 00 20 00 00 00 08 00 00 00 20 00 00 00 20
result: 030: 00 00 00 10 00 00 00 08 00 00 00 08 00 00 00 04
result: 040: 00 00 00 00 00 00 00 00

This commit adds support the model by adding hard-coded stream formats.

$ python3 ~/git/linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04041ad7  bus_info_length 4, crc_length 4, crc 6871
404  31333934  bus_name "1394"
408  e0ff8112  irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
               max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c  00059504  company_id 000595     | Alesis Corporation
410  008003f5  device_id 04008003f5  | EUI-64 00059504008003f5

               root directory
               -----------------------------------------------------------------
414  0006a620  directory_length 6, crc 42528
418  03000595  vendor: Alesis Corporation
41c  8100000a  --> descriptor leaf at 444
420  17000002  model
424  8100000d  --> descriptor leaf at 458
428  0c0087c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               -----------------------------------------------------------------
430  00041b9f  directory_length 4, crc 7071
434  12000595  specifier id: Alesis Corporation
438  13000001  version: audio
43c  17000002  model
440  8100000d  --> descriptor leaf at 474

               descriptor leaf at 444
               -----------------------------------------------------------------
444  000494c2  leaf_length 4, crc 38082
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  416c6573  "Ales"
454  69730000  "is"

               descriptor leaf at 458
               -----------------------------------------------------------------
458  0006c2ec  leaf_length 6, crc 49900
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  4d617374  "Mast"
468  6572436f  "erCo"
46c  6e74726f  "ntro"
470  6c000000  "l"

               descriptor leaf at 474
               -----------------------------------------------------------------
474  0006c2ec  leaf_length 6, crc 49900
478  00000000  textual descriptor
47c  00000000  minimal ASCII
480  4d617374  "Mast"
484  6572436f  "erCo"
488  6e74726f  "ntro"
48c  6c000000  "l"
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-4-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      791a485f
    • Takashi Sakamoto's avatar
      ALSA: dice: loosen stream format check for MIDI conformant data channel · a9f47fcb
      Takashi Sakamoto authored 
      ALSA dice driver expects devices to multiplex MIDI messages into first
port of isochronous communication. Actually devices perform for it.
However, check of stream format is invalid for second port of isochronous
communication. As a result, when the device supports two ports for
isochronous communication and the stream format is hard-coded, ALSA
dice driver fails to start packet streaming.

This commit loosens stream format check for MIDI conformant data channel.
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-3-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      a9f47fcb
    • Takashi Sakamoto's avatar
      ALSA: oxfw: fix for Stanton SCS.1d · 41dbc792
      Takashi Sakamoto authored 
      Stanton SCS.1d uses Oxford Semiconductor FW 971 ASIC (FW971) for
communication. Although the unit is bound to ALSA oxfw driver, the instance
of sound card can not be added due to its quirk of plug information. This
bug was added when snd-scs1x is merged into snd-oxfw at commit
9e2004f9 ("ALSA: oxfw: obsolete scs1x module").

This commit fixes the driver for the quirk. In cases that the unit returns
NOT IMPLEMENTED for some AV/C commands, the sound card is added without any
PCM/MIDI interfaces for packet streaming. For SCS.1d, model dependent
operation adds MIDI interface and applications can use it to operate
according to HSS1394 protocol from reverse-engineering work by Sean M.
Pappalardo.

Plug Control Register (PCR) has information that the unit has a pair of
plugs for isochronous communication:

(oMPR)
$ ./firewire-request /dev/fw1 read 0xfffff0000900
result: 80ff0001
(iMPR)
$ ./firewire-request /dev/fw1 read 0xfffff0000980
result: 80ff0001

AV/C PLUG INFO also returns information that the unit has a pair of
plugs for isochronous communication.

(AV/C PLUG INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff0200ffffffff
response: 000: 0c ff 02 00 01 01 02 02

However, AV/C PLUG SIGNAL INFO command is rejected for both plugs.

(AV/C OUTPUT PLUG SIGNAL INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff1800ffffffff
response: 000: 0a ff 18 00 ff ff ff ff
(AV/C INPUT PLUG SIGNAL INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff1900ffffffff
response: 000: 0a ff 19 00 ff ff ff ff

Furthermore, AV/C EXTENDED STREAM FORMAT INFO is not implemented.

(AV/C EXTENDED STREAM FORMAT INFO list subfunction for input plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc000000000ffff00ff
response: 000: 08 ff bf c0 00 00 00 00 ff ff 00 ff
(AV/C EXTENDED STREAM FORMAT INFO list subfunction for output plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc001000000ffff00ff
response: 000: 08 ff bf c0 01 00 00 00 ff ff 00 ff
(AV/C EXTENDED STREAM FORMAT INFO single subfunction for input plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc100000000ffffffff
response: 000: 08 ff bf c1 00 00 00 00 ff ff ff ff
(AV/C EXTENDED STREAM FORMAT INFO single subfunction for output plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc101000000ffffffff
response: 000: 08 ff bf c1 01 00 00 00 ff ff ff ff

Reference: https://mailman.alsa-project.org/pipermail/alsa-devel/2012-May/052264.htmlSigned-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-4-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      41dbc792
    • Takashi Sakamoto's avatar
      ALSA: oxfw: don't add MIDI/PCM interface when packet streaming is unavailable · 06a42a74
      Takashi Sakamoto authored 
      Stanton SCS.1d doesn't support packet streaming even if it has plugs for
isochronous communication.

This commit is a preparation for this case. The 'has_input' member is
added to specific structure, and MIDI/PCM interfaces are not added when
the member is false.
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-3-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      06a42a74
    • Takashi Sakamoto's avatar
      ALSA: oxfw: use ENXIO for not-supported cases · 03be63b2
      Takashi Sakamoto authored 
      When AV/C command returns 'NOT IMPLEMENTED' status in its response, ALSA
oxfw driver uses ENOSYS as error code. However, it's expected just to be
used for missing system call number.

This commit replaces it with ENXIO.
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-2-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      03be63b2
  5. 12 Jan, 2020 3 commits
  7. 11 Jan, 2020 2 commits
    • Takashi Iwai's avatar
      Merge branch 'for-linus' into for-next · 3cdca6d6
      Takashi Iwai authored 
      Sync 5.5-devel branch once again for applying the HD-audio fixes.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      3cdca6d6
    • Takashi Iwai's avatar
      ALSA: hda: Rename back to dmic_detect option · 7fba6aea
      Takashi Iwai authored 
      We've got quite a few bug reports showing the SOF driver being loaded
unintentionally recently, and the reason seems to be that users didn't
know the module option change: with the recent kernel, a new option
dsp_driver=1 has to be passed to a new module snd-intel-dspcfg
instead of snd_hda_intel.dmic_detect=0 option.

That is, actually there are two tricky things here:
- We changed the whole detection in another module and another
  option semantics.
- The existing option for skipping the DSP probe was also renamed.

For avoiding the confusion and giving user more hint, this patch
reverts the renamed option dsp_driver back to dmic_detect for
snd-hda-intel module, and show the warning about the module option
change when the non-default value is passed.

Fixes: 82d9d54a ("ALSA: hda: add Intel DSP configuration / probe code")
Link: https://lore.kernel.org/r/20200109082000.26729-1-tiwai@suse.deSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      7fba6aea
  9. 08 Jan, 2020 6 commits
  11. 06 Jan, 2020 1 commit
  13. 05 Jan, 2020 18 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7