Skip to content

L
linux
Switch branch/tag
  1. 18 May, 2009 5 commits
    • Ben Dooks's avatar
      [ARM] S3C24XX: GPIO: Add S3C64XX style GPIO numbering · 75cbcff3
      Ben Dooks authored 
      Move the new style of GPIO numbering by using a single
macro for each GPIO bank. This means S3C2410_GPA0 becomes
S3C2410_GPA(0), and so on.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      75cbcff3
    • Ben Dooks's avatar
      [ARM] S3C24XX: GPIO: Start removal of S3C24XX_GPIO_BASE · fda7b2b0
      Ben Dooks authored 
      The S3C24XX_GPIO_BASE makes it difficult to compress the
GPIO number space, and is only used in a few places of
which everything outside arch/arm/plat-s3c24xx/gpiolib.c
will be removed as soon as possible.

Change gpiolib.c to use the S3C2410_GPxCON register addresses
as the base for each bank, thus eliminating S3C24XX_GPIO_BASE.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      fda7b2b0
    • Ben Dooks's avatar
      [ARM] S3C24XX: GPIO: Clean out unused definitions in <mach/regs-gpio.h> · 9c7099ca
      Ben Dooks authored 
      The <mach/regs-gpio.h> really does not need the input and output
pin configurations as these are standard and have a generic
representation (plus the s3c24xx gpio specific code is going to
be phased out soon).

The following sed was applied to remove the lines:

    sed -i~ -e '/S3C2410_GP[A-Z][0-9]*_\INP/d' \
	    -e '/S3C2410_GP[A-Z][0-9]*_\OUTP/d' \
	    -e '/S3C2410_GPA[0-9]*_OUT/d'

to remove these.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      9c7099ca
    • Ben Dooks's avatar
      [ARM] S3C24XX: Fix missing <linux/sysdev.h> · 86c03c52
      Ben Dooks authored 
      In our recent changes, arch/arm/plat-s3c24xx/gpiolib.c needs
to have <linux/sysdev.h> included for it to build.

This fixes the following error/warnings:

arch/arm/plat-s3c/include/plat/pm.h:104: error: expected declaration specifiers or '...' before 'pm_message_t'
arch/arm/plat-s3c/include/plat/pm.h:104: warning: 'struct sys_device' declared inside parameter list
arch/arm/plat-s3c/include/plat/pm.h:104: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/plat-s3c/include/plat/pm.h:105: warning: 'struct sys_device' declared inside parameter list
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      86c03c52
    • Ben Dooks's avatar
      [ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h> · ec976d6e
      Ben Dooks authored 
      Move all the gpio functions out of <mach/hardware.h> as
this file is for defining the generic IO base addresses
for the kernel IO calls.

Make a new header <mach/gpio-fns.h> to take this and
include it via the chain from <linux/gpio.h> which is
what most of these files should be using (and will be
changed as soon as possible).

Note, this does make minor changes to some drivers but
should not mess up any pending merges.

CC: Richard Purdie <rpurdie@rpsys.net>
Acked-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      ec976d6e
  3. 17 May, 2009 2 commits
    • Ben Dooks's avatar
      [ARM] S3C24XX: GPIO: Remove pin specific input and output defines · 9f05f6a9
      Ben Dooks authored 
      The use of S3C2410_GP[A-Z]x_INP and S3C2410_GP[A-Z]x_OUTP are
very rare and are taking up large amounts of space in the
regs-gpio.h header.

The GPIO layer has had generic input and out defines called
S3C2410_GPIO_INPUT and S3C2410_GPIO_OUTPUT for a while which work
for all S3C24XX GPIOs.

Do the following replacements:

   S3C2410_GP[A-Z][0-9]*_\OUTP => S3C2410_GPIO_OUTPUT
   S3C2410_GP[A-Z][0-9]*_\INP  => /S3C2410_GPIO_INPUT
   S3C2410_GPA[0-9]*_OUT       => S3C2410_GPIO_OUTPUT

to remove any usages of these and prepare the header for
the removal of these.

The following command was used to acheive this:

find . -type f -writable ! -name regs-gpio.h ! -name "*~" | xargs sed -i~ -e 's/S3C2410_GP[A-Z][0-9]*_\OUTP/S3C2410_GPIO_OUTPUT/g' -e 's/S3C2410_GP[A-Z][0-9]*_\INP/S3C2410_GPIO_INPUT/g' -e 's/S3C2410_GPA[0-9]*_OUT/S3C2410_GPIO_OUTPUT/g'
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      9f05f6a9
    • Ben Dooks's avatar
      [ARM] S3C24XX: GPIO: Remove s3c2410_gpio_irq2pin() call · ec7f4d5d
      Ben Dooks authored 
      Remove the s3c2410_gpio_irq2pin() function as it is not being
used in any in kernel driver and the function is probably not
being used anywhere else.

This is also part of the effort to remove any of the s3c24xx gpio
specific code that cannot be recreated by using the gpiolib
framework now in the kernel.
Signed-off-by: default avatarBen Dooks <ben@simtec.co.uk>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      ec7f4d5d
  5. 07 May, 2009 22 commits
  7. 01 May, 2009 8 commits
  9. 30 Apr, 2009 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7