In the mqd_diq_sdma buffer, there should be only one HIQ mqd. All DIQs
should be allocated somewhere else using the regular way.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is the same as KFD_MQD_TYPE_CP, so delete it. As a result, we will
have one less mqd mananger per device.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Get mmhub error counter by accessing EDC_CNT registers.

v2: Add mmhub_v9_4_ prefix for local static variable and function
Signed-off-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add codes to print the detail EDC info for the subblock of mmhub

v2: Move the EDC_CNT registers' defintion from mmhub_9_4 header
files to mmhub_1_0 ones. Add mmhub_v1_0_ prefix for the local
static variable and function.

v3: squash in DC fix
Signed-off-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The struct soc15_ras_field_entry will be reused by
other IPs, such as mmhub and gc

v2: rename ras_subblock_regs to gc_ras_fields_vg20,
because the future asic maybe have a different table.
Signed-off-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes: 0bb419c7 ("drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)")
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

50us is not enough to wait for cp ready after gpu reset on some navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Suggested-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only for the debugger use case.

[why]
Avoid endless translation retries, after an invalid address access has
been issued to the GPU. Instead, the trap handler is forced to enter by
generating a no-retry-fault.
A s_trap instruction is inserted in the debugger case to let the wave to
enter trap handler to save context.

[how]
Intentionally using an invalid flag combination (F and P set at the same
time) to trigger a no-retry-fault, after a retry-fault happens. This is
only valid under compute context.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Flag added to indicate if the amdgpu vm context is used for compute or
graphics.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Everything is in place now.  Not enabled by default yet.  You
still have to specify runpm=1.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Originally we only supported runtime pm on PX/HG laptops
so vga_switcheroo and runtime pm are sort of entangled.

Attempt to logically separate them.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off
BOCO - Bus Off, Chip Off

We originally only supported runtime pm on PX/HG
laptops so most of the runtime pm code looks for this.
Add a new flag to check for runtime pm enablement and
use this rather than checking for PX/HG.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

This adds the necessary support to the runtime suspend
and resume functions to handle boards that support
baco.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Will be used for runtime pm.  Entry will enter the BACO
state (chip off).  Exit will exit the BACO state (chip on).
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

So we can use it for power savings rather than just reset.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off
BOCO - Bus Off, Chip Off

We will take slightly different paths for boco and baco.

v2: fold together two consecutive if clauses

Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off
BOCO - Bus Off, Chip Off

To better match what we are checking for and to align with
amdgpu_device_supports_baco.

BOCO is used on PowerXpress/Hybrid Graphics systems and BACO
is used on desktop dGPU boards.

v2: fix typo in documentation
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

To check if a device supports BACO or not.  This will be
used in determining when to enable runtime pm.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Not supported.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.

v2: drop unrelated struct cleanup

Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

BACO - Bus Active, Chip Off

Used to check whether the device supports BACO.  This will
be used to enable runtime pm on devices which support BACO.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To get the value of gpu_busy_percent, it needs to realize
get_current_activity_percent and get_metrics_table.
The framework of renoir smu is different from old ones like raven. It
needs to realize get_current_activity_percent and get_metrics_table in
renoir_ppt.c like navi10.

v2: remove unused variable (Alex)
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ras_controller_irq and athub_err_event_irq are only registered
when PCIE_BIF ras is marked as supported. as the result, the driver
also just need pull the int status in such case.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop all the IP specific cmd_submit callback function
and use the common helper instead
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Except for ring wptr update, the psp ring cmd submission
function shouldn't be IP specific one. Create a common
helper function to be shared for all the ASICs.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The ring write pointer regsiter update is the only part that
is IP specific ones in psp_cmd_submit function.

Add two callbacks for wptr read/write so that we unify the
psp_cmd_submit function for all the ASICs.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This can fix the compile errors below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function ‘smu_v11_0_baco_set_state’:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1674:27: error: implicit declaration of function ‘amdgpu_ras_get_context’ [-Werror=implicit-function-declaration]
  struct amdgpu_ras *ras = amdgpu_ras_get_context(adev);
                           ^
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1674:27: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1692:19: error: dereferencing pointer to incomplete type ‘struct amdgpu_ras’
   if (!ras || !ras->supported) {
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable baco reset support on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added bif doorbell interrupt setting and applied different
settings for BACO reset for RAS recovery.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 1c425915.

S/G display is not stable with the IOMMU enabled on some
platforms.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There are still combinations of sbios and firmware that
are not stable.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

5.4 and newer works fine with navi14.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When gfxoff is enabled, accessing gfx registers via MMIO
can lead to a hang.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Acked-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So that the setting reflects what the hw supports. This will
be used in a subsequent patch so needs to be correct.

v2: squash in fix from Colin Ian King

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

return errno code to caller when error occur, and meanwhile
remove gcc '-Wunused-but-set-variable' warning.

drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c: In function vegam_populate_smc_boot_level:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:1364:6: warning: variable result set but not used [-Wunused-but-set-variable]
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c:64:13-31: WARNING: dma_alloc_coherent use in ih -> ring already zeroes out memory,  so memset is not needed
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>