- 03 Apr, 2014 33 commits
-
-
Goldwyn Rodrigues authored
This is a part of the nocontrold feature which was incorporated sometime back. This is required for backward compatibility of the tools, specifically the scenario where the tools with recovery callback is used with a kernel not using the recovery callbacks (older kernel + newer tools). The tools look for this file to understand if the kernel supports DLM recovery callbacks. For kernels which support recovery callbacks but will miss this patch, ocfs2 will continue to use the older API and would still be able to mount the filesystem. [akpm@linux-foundation.org: simplify] [sfr@canb.auug.org.au: VERIFY_OCTAL_PERMISSIONS fix up] Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery. old recovery master: new recovery master: dlm_remaster_locks() become recovery master for another dead node. dlm_send_begin_reco_message() dlm_begin_reco_handler() { if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) { return -EAGAIN; } dlm_set_reco_master(dlm, br->node_idx); dlm_set_reco_dead_node(dlm, br->dead_node); } dlm_reset_recovery() { dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM); } will hang in dlm_remaster_locks() for request dlm locks info Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared. A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it. Signed-off-by:Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Junxiao Bi authored
This issue was introduced by commit 800deef3 ("ocfs2: use list_for_each_entry where benefical") in 2007 where it replaced list_for_each with list_for_each_entry. The variable "lock" will point to invalid data if "tmpq" list is empty and a panic will be triggered due to this. Sunil advised reverting it back, but the old version was also not right. At the end of the outer for loop, that list_for_each_entry will also set "lock" to an invalid data, then in the next loop, if the "tmpq" list is empty, "lock" will be an stale invalid data and cause the panic. So reverting the list_for_each back and reset "lock" to NULL to fix this issue. Another concern is that this seemes can not happen because the "tmpq" list should not be empty. Let me describe how. old lock resource owner(node 1): migratation target(node 2): image there's lockres with a EX lock from node 2 in granted list, a NR lock from node x with convert_type EX in converting list. dlm_empty_lockres() { dlm_pick_migration_target() { pick node 2 as target as its lock is the first one in granted list. } dlm_migrate_lockres() { dlm_mark_lockres_migrating() { res->state |= DLM_LOCK_RES_BLOCK_DIRTY; wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res)); //after the above code, we can not dirty lockres any more, // so dlm_thread shuffle list will not run downconvert lock from EX to NR upconvert lock from NR to EX <<< migration may schedule out here, then <<< node 2 send down convert request to convert type from EX to <<< NR, then send up convert request to convert type from NR to <<< EX, at this time, lockres granted list is empty, and two locks <<< in the converting list, node x up convert lock followed by <<< node 2 up convert lock. // will set lockres RES_MIGRATING flag, the following // lock/unlock can not run dlm_lockres_release_ast(dlm, res); } dlm_send_one_lockres() dlm_process_recovery_data() for (i=0; i<mres->num_locks; i++) if (ml->node == dlm->node_num) for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) { list_for_each_entry(lock, tmpq, list) if (lock) break; <<< lock is invalid as grant list is empty. } if (lock->ml.node != ml->node) BUG() >>> crash here } I see the above locks status from a vmcore of our internal bug. Signed-off-by:
-
Darrick J. Wong authored
Currently, ocfs2_sync_file grabs i_mutex and forces the current journal transaction to complete. This isn't terribly efficient, since sync_file really only needs to wait for the last transaction involving that inode to complete, and this doesn't require i_mutex. Therefore, implement the necessary bits to track the newest tid associated with an inode, and teach sync_file to wait for that instead of waiting for everything in the journal to commit. Furthermore, only issue the flush request to the drive if jbd2 hasn't already done so. This also eliminates the deadlock between ocfs2_file_aio_write() and ocfs2_sync_file(). aio_write takes i_mutex then calls ocfs2_aiodio_wait() to wait for unaligned dio writes to finish. However, if that dio completion involves calling fsync, then we can get into trouble when some ocfs2_sync_file tries to take i_mutex. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
joyce.xue authored
Variable uuid_net_key in ocfs2_initialize_super() is not used. Clean it up. Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Acked-by:
Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Wengang Wang authored
There is a problem that waitqueue_active() may check stale data thus miss a wakeup of threads waiting on ip_unaligned_aio. The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to be of type mutex thus the above prolem is avoid. Another benifit is that mutex which works as FIFO is fairer than wake_up_all(). Signed-off-by:
-
Zongxun Wang authored
When mounting an ocfs2 volume, it will firstly generate a file /sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread. So the following situation will cause a null pointer dereference. dlm_debug_init -> access file dlm_state which will call dlm_state_print -> dlm_launch_thread Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread can fix this issue. Signed-off-by:
Zongxun Wang <wangzongxun@huawei.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
Switch the RSPI MSTP clock on SH7757 from a con ID match to a dev ID match, so we can start looking it up using clk_get() with a NULL ID. Signed-off-by:
Geert Uytterhoeven <geert+renesas@linux-m68k.org> Tested-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
sh7757lcr SDHI register size is 0x100 Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Simon Horman <horms@verge.net.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Bobby Bingham authored
The compiler is permitted to generate code which overwrites the parameters to a function. If those parameters include the only saved copy we have of userspace's registers, we're in trouble. Signed-off-by:
Bobby Bingham <koorogi@koorogi.info> Cc: Paul Mundt <paul.mundt@gmail.com> Signed-off-by:
-
Bobby Bingham authored
This does not appear to have been used since commit 74d99a5e ("sh: SH-2A FPU support") in 2007. Signed-off-by:
-
Bobby Bingham authored
When invoking syscall handlers on sh32, the saved userspace registers are at the top of the stack. This seems to have been intentional, as it is an easy way to pass r0, r1, ... to the handler as parameters 5, 6, ... It causes problems, however, because the compiler is allowed to generate code for a function which clobbers that function's own parameters. For example, gcc generates the following code for clone: <SyS_clone>: mov.l 8c020714 <SyS_clone+0xc>,r1 ! 8c020540 <do_fork> mov.l r7,@r15 mov r6,r7 jmp @r1 mov #0,r6 nop .word 0x0540 .word 0x8c02 The `mov.l r7,@r15` clobbers the saved value of r0 passed from userspace. For most system calls, this might not be a problem, because we'll be overwriting r0 with the return value anyway. But in the case of clone, copy_thread will need the original value of r0 if the CLONE_SETTLS flag was specified. The first patch in this series fixes this issue for system calls by pushing to the stack and extra copy of r0-r2 before invoking the handler. We discard this copy before restoring the userspace registers, so it is not a problem if they are clobbered. Exception handlers also receive the userspace register values in a similar manner, and may hit the same problem. The second patch removes the do_fpu_error handler, which looks susceptible to this problem and which, as far as I can tell, has not been used in some time. The third patch addresses other exception handlers. This patch (of 3): The userspace registers are stored at the top of the stack when the syscall handler is invoked, which allows r0-r2 to act as parameters 5-7. Parameters passed on the stack may be clobbered by the syscall handler. The solution is to push an extra copy of the registers which might be used as syscall parameters to the stack, so that the authoritative set of saved register values does not get clobbered. A few system call handlers are also updated to get the userspace registers using current_pt_regs() instead of from the stack. Signed-off-by: -
Michael Opdenacker authored
This removes the CPU_SCORE7 Kconfig parameter, which is no longer used anywhere in the source code and Makefiles. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by:
-
Jan Beulich authored
Recent increased use of typeof() throughout the tree resulted in a number of symbols (25 in a typical distro config of ours) not getting a proper CRC calculated for them anymore, due to the parser in genksyms not coping with several of these uses (interestingly in the majority of [if not all] cases the problem is due to the use of typeof() in code preceding a certain export, not in the declaration/definition of the exported function/object itself; I wasn't able to find a way to address this more general parser shortcoming). The use of parameter_declaration is a little more relaxed than would be ideal (permitting not just a bare type specification, but also one with identifier), but since the same code is being passed through an actual compiler, there's no apparent risk of allowing through any broken code. Otoh using parameter_declaration instead of the ad hoc "decl_specifier_seq '*'" / "decl_specifier_seq" pair allows all types to be handled rather than just plain ones and pointers to plain ones. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Jan Kara authored
Move code moving event structure to access_list from copy_event_to_user() to fanotify_read() where it is more logical (so that we can immediately see in the main loop that we either move the event to a different list or free it). Also move special error handling for permission events from copy_event_to_user() to the main loop to have it in one place with error handling for normal events. This makes copy_event_to_user() really only copy the event to user without any side effects. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
Swap the error / "read ok" branches in the main loop of fanotify_read(). We will grow the "read ok" part in the next patch and this makes the indentation easier. Also it is more common to have error conditions inside an 'if' instead of the fast path. Signed-off-by:
-
Jan Kara authored
access_mutex is used only to guard operations on access_list. There's no need for sleeping within this lock so just make a spinlock out of it. Signed-off-by:
-
Jan Kara authored
Currently, fanotify creates new structure to track the fact that permission event has been reported to userspace and someone is waiting for a response to it. As event structures are now completely in the hands of each notification framework, we can use the event structure for this tracking instead of allocating a new structure. Since this makes the event structures for normal events and permission events even more different and the structures have different lifetime rules, we split them into two separate structures (where permission event structure contains the structure for a normal event). This makes normal events 8 bytes smaller and the code a tad bit cleaner. [akpm@linux-foundation.org: fix build] Signed-off-by:
-
Jan Kara authored
The prepare_for_access_response() function checks whether group->fanotify_data.bypass_perm is set. However this test can never be true because prepare_for_access_response() is called only from fanotify_read() which means fanotify group is alive with an active fd while bypass_perm is set from fanotify_release() when all file descriptors pointing to the group are closed and the group is going away. Signed-off-by:
-
Fabian Frederick authored
nameidata was replaced by flags in commit 00cd8dd3 ("stop passing nameidata to ->lookup()"). Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Fabian Frederick authored
cifs_init_inodecache is only called by __init init_cifs. Signed-off-by:
-
Li Zefan authored
They don't have to be atomic_t, because they are simple boolean toggles. Signed-off-by:
Li Zefan <lizefan@huawei.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Li Zefan authored
Remove kmemleak_padding() and kmemleak_release(). Signed-off-by:
-
Li Zefan authored
Currently if kmemleak is disabled, the kmemleak objects can never be freed, no matter if it's disabled by a user or due to fatal errors. Those objects can be a big waste of memory. OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 1200264 1197433 99% 0.30K 46164 26 369312K kmemleak_object With this patch, after kmemleak was disabled you can reclaim memory with: # echo clear > /sys/kernel/debug/kmemleak Also inform users about this with a printk. Signed-off-by: -
Li Zefan authored
Currently if you stop kmemleak thread before disabling kmemleak, kmemleak objects will be freed and so you won't be able to check previously reported leaks. With this patch, kmemleak objects won't be freed if there're leaks that can be reported. Signed-off-by:
-
Nishanth Aravamudan authored
In the presence of memoryless nodes, numa_node_id() will return the current CPU's NUMA node, but that may not be where we expect to allocate from memory from. Instead, we should rely on the fallback code in the memory allocator itself, by using NUMA_NO_NODE. Also, when calling kthread_create_on_node(), use the nearest node with memory to the cpu in question, rather than the node it is running on. Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Anton Blanchard <anton@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jan Kara authored
After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue") when device is removed while we are writing to it we crash in bdi_writeback_workfn() -> set_worker_desc() because bdi->dev is NULL. This can happen because even though bdi_unregister() cancels all pending flushing work, nothing really prevents new ones from being queued from balance_dirty_pages() or other places. Fix the problem by clearing BDI_registered bit in bdi_unregister() and checking it before scheduling of any flushing work. Fixes: 839a8e86Reviewed-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Derek Basehore authored
bdi_wakeup_thread_delayed() used the mod_delayed_work() function to schedule work to writeback dirty inodes. The problem with this is that it can delay work that is scheduled for immediate execution, such as the work from sync_inodes_sb(). This can happen since mod_delayed_work() can now steal work from a work_queue. This fixes the problem by using queue_delayed_work() instead. This is a regression caused by commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"). The reason that this causes a problem is that laptop-mode will change the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default. In the case that bdi_wakeup_thread_delayed() races with sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung task. Even if dirty_writeback_centisecs is not long enough to cause a hung task, we still don't want to delay sync for that long. We fix the problem by using queue_delayed_work() when we want to schedule writeback sometime in future. This function doesn't change the timer if it is already armed. For the same reason, we also change bdi_writeback_workfn() to immediately queue the work again in the case that the work_list is not empty. The same problem can happen if the sync work is run on the rescue worker. [jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()] Signed-off-by:
Derek Basehore <dbasehore@chromium.org> Reviewed-by:
-
Matt Fleming authored
Kees reported the following error: arch/sh/kernel/dumpstack.c: In function 'print_trace_address': arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security] Use the "%s" format so that it's impossible to interpret 'data' as a format string. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "Here is the crypto update for 3.15: - Added 3DES driver for OMAP4/AM43xx - Added AVX2 acceleration for SHA - Added hash-only AEAD algorithms in caam - Removed tegra driver as it is not functioning and the hardware is too slow - Allow blkcipher walks over AEAD (needed for ARM) - Fixed unprotected FPU/SSE access in ghash-clmulni-intel - Fixed highmem crash in omap-sham - Add (zero entropy) randomness when initialising hardware RNGs - Fixed unaligned ahash comletion functions - Added soft module depedency for crc32c for initrds that use crc32c" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (60 commits) crypto: ghash-clmulni-intel - use C implementation for setkey() crypto: x86/sha1 - reduce size of the AVX2 asm implementation crypto: x86/sha1 - fix stack alignment of AVX2 variant crypto: x86/sha1 - re-enable the AVX variant crypto: sha - SHA1 transform x86_64 AVX2 crypto: crypto_wq - Fix late crypto work queue initialization crypto: caam - add missing key_dma unmap crypto: caam - add support for aead null encryption crypto: testmgr - add aead null encryption test vectors crypto: export NULL algorithms defines crypto: caam - remove error propagation handling crypto: hash - Simplify the ahash_finup implementation crypto: hash - Pull out the functions to save/restore request crypto: hash - Fix the pointer voodoo in unaligned ahash crypto: caam - Fix first parameter to caam_init_rng crypto: omap-sham - Map SG pages if they are HIGHMEM before accessing crypto: caam - Dynamic memory allocation for caam_rng_ctx object crypto: allow blkcipher walks over AEAD data crypto: remove direct blkcipher_walk dependency on transform hwrng: add randomness to system from rng sources ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security subsystem updates from James Morris: "Apart from reordering the SELinux mmap code to ensure DAC is called before MAC, these are minor maintenance updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) selinux: correctly label /proc inodes in use before the policy is loaded selinux: put the mmap() DAC controls before the MAC controls selinux: fix the output of ./scripts/get_maintainer.pl for SELinux evm: enable key retention service automatically ima: skip memory allocation for empty files evm: EVM does not use MD5 ima: return d_name.name if d_path fails integrity: fix checkpatch errors ima: fix erroneous removal of security.ima xattr security: integrity: Use a more current logging style MAINTAINERS: email updates and other misc. changes ima: reduce memory usage when a template containing the n field is used ima: restore the original behavior for sending data with ima template Integrity: Pass commname via get_task_comm() fs: move i_readcount ima: use static const char array definitions security: have cap_dentry_init_security return error ima: new helper: file_inode(file) kernel: Mark function as static in kernel/seccomp.c capability: Use current logging styles ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
-
- 02 Apr, 2014 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - substantial cleanup of the generic and transport layers, in the direction of an ultimate goal of making struct hid_device completely transport independent, by Benjamin Tissoires - cp2112 driver from David Barksdale - a lot of fixes and new hardware support (Dualshock 4) to hid-sony driver, by Frank Praznik - support for Win 8.1 multitouch protocol by Andrew Duggan - other smaller fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits) HID: sony: fix force feedback mismerge HID: sony: Set the quriks flag for Bluetooth controllers HID: sony: Fix Sixaxis cable state detection HID: uhid: Add UHID_CREATE2 + UHID_INPUT2 HID: hyperv: fix _raw_request() prototype HID: hyperv: Implement a stub raw_request() entry point HID: hid-sensor-hub: fix sleeping function called from invalid context HID: multitouch: add support for Win 8.1 multitouch touchpads HID: remove hid_output_raw_report transport implementations HID: sony: do not rely on hid_output_raw_report HID: cp2112: remove the last hid_output_raw_report() call HID: cp2112: remove various hid_out_raw_report calls HID: multitouch: add support of other generic collections in hid-mt HID: multitouch: remove pen special handling HID: multitouch: remove registered devices with default behavior HID: hidp: Add a comment that some devices depend on the current behavior of uniq HID: sony: Prevent duplicate controller connections. HID: sony: Perform a boundry check on the sixaxis battery level index. HID: sony: Fix work queue issues HID: sony: Fix multi-line comment styling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull sched/idle changes from Ingo Molnar: "More idle code reorganization, to prepare for more integration. (Sent separately because it depended on pending timer work, which is now upstream)" * 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/idle: Add more comments to the code sched/idle: Move idle conditions in cpuidle_idle main function sched/idle: Reorganize the idle loop cpuidle/idle: Move the cpuidle_idle_call function to idle.c idle/cpuidle: Split cpuidle_idle_call main function into smaller functions
-
Oleg Nesterov authored
pidns_get()->get_pid_ns() can hit ns == NULL. This task_struct can't go away, but task_active_pid_ns(task) is NULL if release_task(task) was already called. Alternatively we could change get_pid_ns(ns) to check ns != NULL, but it seems that other callers are fine. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman ebiederm@xmission.com> Cc: stable@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull virtio updates from Rusty Russell: "Nothing exciting: virtio-blk users might see a bit of a boost from the doubling of the default queue length though" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio-blk: base queue-depth on virtqueue ringsize or module param Revert a02bbb1c: MAINTAINERS: add virtio-dev ML for virtio virtio: fail adding buffer on broken queues. virtio-rng: don't crash if virtqueue is broken. virtio_balloon: don't crash if virtqueue is broken. virtio_blk: don't crash, report error if virtqueue is broken. virtio_net: don't crash if virtqueue is broken. virtio_balloon: don't softlockup on huge balloon changes. virtio: Use pci_enable_msix_exact() instead of pci_enable_msix() MAINTAINERS: virtio-dev is subscribers only tools/virtio: add a missing ) tools/virtio: fix missing kmemleak_ignore symbol tools/virtio: update internal copies of headers
-
git://git.linaro.org/people/mszyprowski/linux-dma-mappingLinus Torvalds authored
Pull DMA-mapping updates from Marek Szyprowski: "This contains extension for more efficient handling of io address space for dma-mapping subsystem for ARM architecture" * 'for-3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: dma-mapping: remove order parameter from arm_iommu_create_mapping() arm: dma-mapping: Add support to extend DMA IOMMU mappings
-
