BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it
can be called from atomic and non-atomic contexts since we don't have
bpf_prog_active to prevent it happen.

This patch enables 3 levels of nesting to support normal, irq and nmi
context.

We can easily reproduce the issue by running netperf crr mode with 100
flows and 10 threads from netperf client side.

Here is the whole stack dump:

[  515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220
[  515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G        W        4.15.0-smp-fixpanic #44
[  515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018
[  515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220
[  515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246
[  515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000
[  515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80
[  515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012
[  515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002
[  515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0
[  515.228910] FS:  00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000
[  515.228910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0
[  515.228911] Call Trace:
[  515.228913]  <IRQ>
[  515.228919]  [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50
[  515.228923]  [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[  515.228927]  [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[  515.228930]  [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150
[  515.228933]  [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110
[  515.228936]  [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010
[  515.228939]  [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0
[  515.228942]  [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0
[  515.228945]  [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460
[  515.228947]  [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30
[  515.228951]  [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220
[  515.228955]  [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450
[  515.228958]  [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170
[  515.228961]  [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450
[  515.228963]  [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0
[  515.228966]  [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330
[  515.228969]  [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0
[  515.228972]  [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70
[  515.228975]  [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150
[  515.228978]  [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410
[  515.228982]  [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305
[  515.228986]  [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0
[  515.228989]  [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120
[  515.228991]  [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90
[  515.228992]  </IRQ>
[  515.228996]  [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20
[  515.229000]  [<ffffffff8259c040>] ? console_unlock+0x230/0x490
[  515.229003]  [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0
[  515.229006]  [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30
[  515.229008]  [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70
[  515.229011]  [<ffffffff8259d4bb>] ? printk+0x50/0x66
[  515.229013]  [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220
[  515.229016]  [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50
[  515.229019]  [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[  515.229023]  [<ffffffff82c29e87>] ? release_sock+0x97/0xb0
[  515.229026]  [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0
[  515.229029]  [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[  515.229032]  [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0
[  515.229035]  [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600
[  515.229038]  [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460
[  515.229040]  [<ffffffff82d21082>] ? inet_release+0x42/0x70
[  515.229043]  [<ffffffff82d58809>] ? inet6_release+0x39/0x50
[  515.229046]  [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0
[  515.229049]  [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20
[  515.229052]  [<ffffffff8273b517>] ? __fput+0xe7/0x1f0
[  515.229055]  [<ffffffff8273b66e>] ? ____fput+0xe/0x10
[  515.229058]  [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0
[  515.229061]  [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f
[  515.229064]  [<ffffffff82408171>] ? do_syscall_64+0x111/0x130
[  515.229067]  [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: a5a3a828 ("bpf: add perf event notificaton support for sock_ops")
Signed-off-by: Allan Zhang <allanzhang@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20190925234312.94063-2-allanzhang@google.com

There is a statement that is indented one level too deeply, remove
the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925093835.19515-1-colin.king@canonical.com

BTF-to-C converter previously skipped anonymous enums in an assumption
that those are embedded in struct's field definitions. This is not
always the case and a lot of kernel constants are defined as part of
anonymous enums. This change fixes the logic by eagerly marking all
types as either referenced by any other type or not. This is enough to
distinguish two classes of anonymous enums and emit previously omitted
enum definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com

Some recent changes in latest Clang started causing the following
warning when unrolling strobemeta test case main loop:

  progs/strobemeta.h:416:2: warning: loop not unrolled: the optimizer was
  unable to perform the requested transformation; the transformation might
  be disabled or specified as part of an unsupported transformation
  ordering [-Wpass-failed=transform-warning]

This patch simplifies loop's exit condition to depend only on constant
max iteration number (STROBE_MAX_MAP_ENTRIES), while moving early
termination logic inside the loop body. The changes are equivalent from
program logic standpoint, but fixes the warning. It also appears to
improve generated BPF code, as it fixes previously failing non-unrolled
strobemeta test cases.

Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Remove no longer used variables and avoid compiler warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Some compilers emit warning for potential uninitialized next_id usage.
The code is correct, but control flow is too complicated for some
compilers to figure this out. Re-initialize next_id to satisfy
compiler.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When kzalloc() failed, NULL was returned to the caller, which
tested the pointer with IS_ERR(), which didn't match, so the
pointer was used later, resulting in a NULL dereference.

Return ERR_PTR(-ENOMEM) instead of NULL.

Reported-by: syzbot+491c1b7565ba9069ecae@syzkaller.appspotmail.com
Fixes: 0402acd6 ("xsk: remove AF_XDP socket from map when the socket is released")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This is the same problem I found earlier in test_sockopt_inherit:
there is a race between server thread doing accept() and client
thread doing connect(). Let's explicitly synchronize them via
pthread conditional variable.

v2:
* don't exit from server_thread without signaling condvar,
  fixes possible issue where main() would wait forever (Andrii Nakryiko)

Fixes: b5587398 ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch removes the 64B alignment of the UMEM headroom. There is
really no reason for it, and having a headroom less than 64B should be
valid.

Fixes: c0c77d8f ("xsk: add user memory registration support sockopt")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

vmlinux BTF has more than 64k types.
Its string section is also at the offset larger than 64k.
Adjust both limits to make in-kernel BTF verifier successfully parse in-kernel BTF.

Fixes: 69b693f0 ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

vmlinux BTF has enums that are 8 byte and 1 byte in size.
2 byte enum is a valid construct as well.
Fix BTF enum verification to accept those sizes.

Fixes: 69b693f0 ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The xsk_socket__create() function fails and returns an error if it cannot
get the XDP_OPTIONS through getsockopt(). However, support for XDP_OPTIONS
was not added until kernel 5.3, so this means that creating XSK sockets
always fails on older kernels.

Since the option is just used to set the zero-copy flag in the xsk struct,
and that flag is not really used for anything yet, just remove the
getsockopt() call until a proper use for it is introduced.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

After a reset packet sizes and device mtu can change and need
to be reevaluated to calculate queue sizes.
Malicious devices can set this to zero and we divide by it.
Introduce sanity checking.

Reported-and-tested-by:  syzbot+6102c120be558c885f04@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull xfs updates from Darrick Wong:
 "For this cycle we have the usual pile of cleanups and bug fixes, some
  performance improvements for online metadata scrubbing, massive
  speedups in the directory entry creation code, some performance
  improvement in the file ACL lookup code, a fix for a logging stall
  during mount, and fixes for concurrency problems.

  It has survived a couple of weeks of xfstests runs and merges cleanly.

  Summary:

   - Remove KM_SLEEP/KM_NOSLEEP.

   - Ensure that memory buffers for IO are properly sector-aligned to
     avoid problems that the block layer doesn't check.

   - Make the bmap scrubber more efficient in its record checking.

   - Don't crash xfs_db when superblock inode geometry is corrupt.

   - Fix btree key helper functions.

   - Remove unneeded error returns for things that can't fail.

   - Fix buffer logging bugs in repair.

   - Clean up iterator return values.

   - Speed up directory entry creation.

   - Enable allocation of xattr value memory buffer during lookup.

   - Fix readahead racing with truncate/punch hole.

   - Other minor cleanups.

   - Fix one AGI/AGF deadlock with RENAME_WHITEOUT.

   - More BUG -> WARN whackamole.

   - Fix various problems with the log failing to advance under certain
     circumstances, which results in stalls during mount"

* tag 'xfs-5.4-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (45 commits)
  xfs: push the grant head when the log head moves forward
  xfs: push iclog state cleaning into xlog_state_clean_log
  xfs: factor iclog state processing out of xlog_state_do_callback()
  xfs: factor callbacks out of xlog_state_do_callback()
  xfs: factor debug code out of xlog_state_do_callback()
  xfs: prevent CIL push holdoff in log recovery
  xfs: fix missed wakeup on l_flush_wait
  xfs: push the AIL in xlog_grant_head_wake
  xfs: Use WARN_ON_ONCE for bailout mount-operation
  xfs: Fix deadlock between AGI and AGF with RENAME_WHITEOUT
  xfs: define a flags field for the AG geometry ioctl structure
  xfs: add a xfs_valid_startblock helper
  xfs: remove the unused XFS_ALLOC_USERDATA flag
  xfs: cleanup xfs_fsb_to_db
  xfs: fix the dax supported check in xfs_ioctl_setattr_dax_invalidate
  xfs: Fix stale data exposure when readahead races with hole punch
  fs: Export generic_fadvise()
  mm: Handle MADV_WILLNEED through vfs_fadvise()
  xfs: allocate xattr buffer on demand
  xfs: consolidate attribute value copying
  ...

Pull swap access updates from Darrick Wong:
 "Prohibit writing to active swap files and swap partitions.

  There's no non-malicious use case for allowing userspace to scribble
  on storage that the kernel thinks it owns"

* tag 'vfs-5.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: don't allow writes to swap files
  mm: set S_SWAPFILE on blockdev swap devices

Pull overlayfs fixes from Miklos Szeredi:
 "Fix a regression in docker introduced by overlayfs changes in 4.19.
  Also fix a couple of miscellaneous bugs"

* tag 'ovl-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: filter of trusted xattr results in audit
  ovl: Fix dereferencing possible ERR_PTR()
  ovl: fix regression caused by overlapping layers detection

Pull btrfs updates from David Sterba:
 "This continues with work on code refactoring, sanity checks and space
  handling. There are some less user visible changes, nothing that would
  particularly stand out.

  User visible changes:
   - tree checker, more sanity checks of:
       - ROOT_ITEM (key, size, generation, level, alignment, flags)
       - EXTENT_ITEM and METADATA_ITEM checks (key, size, offset,
         alignment, refs)
       - tree block reference items
       - EXTENT_DATA_REF (key, hash, offset)

   - deprecate flag BTRFS_SUBVOL_CREATE_ASYNC for subvolume creation
     ioctl, scheduled removal in 5.7

   - delete stale and unused UAPI definitions
     BTRFS_DEV_REPLACE_ITEM_STATE_*

   - improved export of debugging information available via existing
     sysfs directory structure

   - try harder to delete relations between qgroups and allow to delete
     orphan entries

   - remove unreliable space checks before relocation starts

  Core:
   - space handling:
       - improved ticket reservations and other high level logic in
         order to remove special cases
       - factor flushing infrastructure and use it for different
         contexts, allows to remove some special case handling
       - reduce metadata reservation when only updating inodes
       - reduce global block reserve minimum size (affects small
         filesystems)
       - improved overcommit logic wrt global block reserve

   - tests:
       - fix memory leaks in extent IO tree
       - catch all TRIM range

  Fixes:
   - fix ENOSPC errors, leading to transaction aborts, when cloning
     extents

   - several fixes for inode number cache (mount option inode_cache)

   - fix potential soft lockups during send when traversing large trees

   - fix unaligned access to space cache pages with SLUB debug on
     (PowerPC)

  Other:
   - refactoring public/private functions, moving to new or more
     appropriate files

   - defines converted to enums

   - error handling improvements

   - more assertions and comments

   - old code deletion"

* tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (138 commits)
  btrfs: Relinquish CPUs in btrfs_compare_trees
  btrfs: Don't assign retval of btrfs_try_tree_write_lock/btrfs_tree_read_lock_atomic
  btrfs: create structure to encode checksum type and length
  btrfs: turn checksum type define into an enum
  btrfs: add enospc debug messages for ticket failure
  btrfs: do not account global reserve in can_overcommit
  btrfs: use btrfs_try_granting_tickets in update_global_rsv
  btrfs: always reserve our entire size for the global reserve
  btrfs: change the minimum global reserve size
  btrfs: rename btrfs_space_info_add_old_bytes
  btrfs: remove orig_bytes from reserve_ticket
  btrfs: fix may_commit_transaction to deal with no partial filling
  btrfs: rework wake_all_tickets
  btrfs: refactor the ticket wakeup code
  btrfs: stop partially refilling tickets when releasing space
  btrfs: add space reservation tracepoint for reserved bytes
  btrfs: roll tracepoint into btrfs_space_info_update helper
  btrfs: do not allow reservations if we have pending tickets
  btrfs: stop clearing EXTENT_DIRTY in inode I/O tree
  btrfs: treat RWF_{,D}SYNC writes as sync for CRCs
  ...

Pull AFS updates from David Howells:
 "Here's a set of patches for AFS. The first three are trivial, deleting
  unused symbols and rolling out a wrapper function.

  The fourth and fifth patches make use of the previously added RCU-safe
  request_key facility to allow afs_permission() and afs_d_revalidate()
  to attempt to operate without dropping out of RCU-mode pathwalk. Under
  certain conditions, such as conflict with another client, we still
  have to drop out anyway, take a lock and consult the server"

* tag 'afs-next-20190915' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Support RCU pathwalk
  afs: Provide an RCU-capable key lookup
  afs: Use afs_extract_discard() rather than iov_iter_discard()
  afs: remove unused variable 'afs_zero_fid'
  afs: remove unused variable 'afs_voltypes'

Pull fs-verity support from Eric Biggers:
 "fs-verity is a filesystem feature that provides Merkle tree based
  hashing (similar to dm-verity) for individual readonly files, mainly
  for the purpose of efficient authenticity verification.

  This pull request includes:

   (a) The fs/verity/ support layer and documentation.

   (b) fs-verity support for ext4 and f2fs.

  Compared to the original fs-verity patchset from last year, the UAPI
  to enable fs-verity on a file has been greatly simplified. Lots of
  other things were cleaned up too.

  fs-verity is planned to be used by two different projects on Android;
  most of the userspace code is in place already. Another userspace tool
  ("fsverity-utils"), and xfstests, are also available. e2fsprogs and
  f2fs-tools already have fs-verity support. Other people have shown
  interest in using fs-verity too.

  I've tested this on ext4 and f2fs with xfstests, both the existing
  tests and the new fs-verity tests. This has also been in linux-next
  since July 30 with no reported issues except a couple minor ones I
  found myself and folded in fixes for.

  Ted and I will be co-maintaining fs-verity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  f2fs: add fs-verity support
  ext4: update on-disk format documentation for fs-verity
  ext4: add fs-verity read support
  ext4: add basic fs-verity support
  fs-verity: support builtin file signatures
  fs-verity: add SHA-512 support
  fs-verity: implement FS_IOC_MEASURE_VERITY ioctl
  fs-verity: implement FS_IOC_ENABLE_VERITY ioctl
  fs-verity: add data verification hooks for ->readpages()
  fs-verity: add the hook for file ->setattr()
  fs-verity: add the hook for file ->open()
  fs-verity: add inode and superblock fields
  fs-verity: add Kconfig and the helper functions for hashing
  fs: uapi: define verity bit for FS_IOC_GETFLAGS
  fs-verity: add UAPI header
  fs-verity: add MAINTAINERS file entry
  fs-verity: add a documentation file

Pull fscrypt updates from Eric Biggers:
 "This is a large update to fs/crypto/ which includes:

   - Add ioctls that add/remove encryption keys to/from a
     filesystem-level keyring.

     These fix user-reported issues where e.g. an encrypted home
     directory can break NetworkManager, sshd, Docker, etc. because they
     don't get access to the needed keyring. These ioctls also provide a
     way to lock encrypted directories that doesn't use the
     vm.drop_caches sysctl, so is faster, more reliable, and doesn't
     always need root.

   - Add a new encryption policy version ("v2") which switches to a more
     standard, secure, and flexible key derivation function, and starts
     verifying that the correct key was supplied before using it.

     The key derivation improvement is needed for its own sake as well
     as for ongoing feature work for which the current way is too
     inflexible.

  Work is in progress to update both Android and the 'fscrypt' userspace
  tool to use both these features. (Working patches are available and
  just need to be reviewed+merged.) Chrome OS will likely use them too.

  This has also been tested on ext4, f2fs, and ubifs with xfstests --
  both the existing encryption tests, and the new tests for this. This
  has also been in linux-next since Aug 16 with no reported issues. I'm
  also using an fscrypt v2-encrypted home directory on my personal
  desktop"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (27 commits)
  ext4 crypto: fix to check feature status before get policy
  fscrypt: document the new ioctls and policy version
  ubifs: wire up new fscrypt ioctls
  f2fs: wire up new fscrypt ioctls
  ext4: wire up new fscrypt ioctls
  fscrypt: require that key be added when setting a v2 encryption policy
  fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl
  fscrypt: allow unprivileged users to add/remove keys for v2 policies
  fscrypt: v2 encryption policy support
  fscrypt: add an HKDF-SHA512 implementation
  fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl
  fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
  fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
  fscrypt: rename keyinfo.c to keysetup.c
  fscrypt: move v1 policy key setup to keysetup_v1.c
  fscrypt: refactor key setup code in preparation for v2 policies
  fscrypt: rename fscrypt_master_key to fscrypt_direct_key
  fscrypt: add ->ci_inode to fscrypt_info
  fscrypt: use FSCRYPT_* definitions, not FS_*
  fscrypt: use FSCRYPT_ prefix for uapi constants
  ...

Pull file locking updates from Jeff Layton:
 "Just a couple of minor bugfixes, a revision to a tracepoint to account
  for some earlier changes to the internals, and a patch to add a
  pr_warn message when someone tries to mount a filesystem with '-o
  mand' on a kernel that has that support disabled"

* tag 'filelock-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: fix a memory leak bug in __break_lease()
  locks: print a warning when mount fails due to lack of "mand" support
  locks: Fix procfs output for file leases
  locks: revise generic_add_lease tracepoint

Pull vfs mount API infrastructure updates from Al Viro:
 "Infrastructure bits of mount API conversions.

  The rest is more of per-filesystem updates and that will happen
  in separate pull requests"

* 'work.mount-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mtd: Provide fs_context-aware mount_mtd() replacement
  vfs: Create fs_context-aware mount_bdev() replacement
  new helper: get_tree_keyed()
  vfs: set fs_context::user_ns for reconfigure

Pull d_path fix from Al Viro:
 "Fix d_absolute_path() regression in the last cycle (felt by tomoyo,
  mostly)"

* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  [PATCH] fix d_absolute_path() interplay with fsmount()

Pull vfs namei updates from Al Viro:
 "Pathwalk-related stuff"

[ Audit-related cleanups, misc simplifications, and easier to follow
  nd->root refcounts     - Linus ]

* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  devpts_pty_kill(): don't bother with d_delete()
  infiniband: don't bother with d_delete()
  hypfs: don't bother with d_delete()
  fs/namei.c: keep track of nd->root refcount status
  fs/namei.c: new helper - legitimize_root()
  kill the last users of user_{path,lpath,path_dir}()
  namei.h: get the comments on LOOKUP_... in sync with reality
  kill LOOKUP_NO_EVAL, don't bother including namei.h from audit.h
  audit_inode(): switch to passing AUDIT_INODE_...
  filename_mountpoint(): make LOOKUP_NO_EVAL unconditional there
  filename_lookup(): audit_inode() argument is always 0

Pull networking updates from David Miller:

 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.

 2) Use bio_vec in the networking instead of custom skb_frag_t, from
    Matthew Wilcox.

 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.

 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.

 5) Support all variants of 5750X bnxt_en chips, from Michael Chan.

 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
    Buslov.

 7) Add TCP syn cookies bpf helper, from Petar Penkov.

 8) Add 'nettest' to selftests and use it, from David Ahern.

 9) Add extack support to drop_monitor, add packet alert mode and
    support for HW drops, from Ido Schimmel.

10) Add VLAN offload to stmmac, from Jose Abreu.

11) Lots of devm_platform_ioremap_resource() conversions, from
    YueHaibing.

12) Add IONIC driver, from Shannon Nelson.

13) Several kTLS cleanups, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
  mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
  mlxsw: spectrum: Register CPU port with devlink
  mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
  net: ena: fix incorrect update of intr_delay_resolution
  net: ena: fix retrieval of nonadaptive interrupt moderation intervals
  net: ena: fix update of interrupt moderation register
  net: ena: remove all old adaptive rx interrupt moderation code from ena_com
  net: ena: remove ena_restore_ethtool_params() and relevant fields
  net: ena: remove old adaptive interrupt moderation code from ena_netdev
  net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
  net: ena: enable the interrupt_moderation in driver_supported_features
  net: ena: reimplement set/get_coalesce()
  net: ena: switch to dim algorithm for rx adaptive interrupt moderation
  net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
  net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
  ethtool: implement Energy Detect Powerdown support via phy-tunable
  xen-netfront: do not assume sk_buff_head list is empty in error handling
  s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
  net: ena: don't wake up tx queue when down
  drop_monitor: Better sanitize notified packets
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Add the ability to abort a skcipher walk.

  Algorithms:
   - Fix XTS to actually do the stealing.
   - Add library helpers for AES and DES for single-block users.
   - Add library helpers for SHA256.
   - Add new DES key verification helper.
   - Add surrounding bits for ESSIV generator.
   - Add accelerations for aegis128.
   - Add test vectors for lzo-rle.

  Drivers:
   - Add i.MX8MQ support to caam.
   - Add gcm/ccm/cfb/ofb aes support in inside-secure.
   - Add ofb/cfb aes support in media-tek.
   - Add HiSilicon ZIP accelerator support.

  Others:
   - Fix potential race condition in padata.
   - Use unbound workqueues in padata"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits)
  crypto: caam - Cast to long first before pointer conversion
  crypto: ccree - enable CTS support in AES-XTS
  crypto: inside-secure - Probe transform record cache RAM sizes
  crypto: inside-secure - Base RD fetchcount on actual RD FIFO size
  crypto: inside-secure - Base CD fetchcount on actual CD FIFO size
  crypto: inside-secure - Enable extended algorithms on newer HW
  crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL
  crypto: inside-secure - Add EIP97/EIP197 and endianness detection
  padata: remove cpu_index from the parallel_queue
  padata: unbind parallel jobs from specific CPUs
  padata: use separate workqueues for parallel and serial work
  padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible
  crypto: pcrypt - remove padata cpumask notifier
  padata: make padata_do_parallel find alternate callback CPU
  workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs
  workqueue: unconfine alloc/apply/free_workqueue_attrs()
  padata: allocate workqueue internally
  arm64: dts: imx8mq: Add CAAM node
  random: Use wait_event_freezable() in add_hwgenerator_randomness()
  crypto: ux500 - Fix COMPILE_TEST warnings
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...

Pull staging and IIO driver updates from Greg KH:
 "Here is the big staging/iio driver update for 5.4-rc1.

  Lots of churn here, with a few driver/filesystems moving out of
  staging finally:

     - erofs moved out of staging

     - greybus core code moved out of staging

  Along with that, a new filesytem has been added:

     - extfat

  to provide support for those devices requiring that filesystem (i.e.
  transfer devices to/from windows systems or printers)

  Other than that, there a number of new IIO drivers, and lots and lots
  and lots of staging driver cleanups and minor fixes as people continue
  to dig into those for easy changes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits)
  Staging: gasket: Use temporaries to reduce line length.
  Staging: octeon: Avoid several usecases of strcpy
  staging: vhciq_core: replace snprintf with scnprintf
  staging: wilc1000: avoid twice IRQ handler execution for each single interrupt
  staging: wilc1000: remove unused interrupt status handling code
  staging: fbtft: make several arrays static const, makes object smaller
  staging: rtl8188eu: make two arrays static const, makes object smaller
  staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST"
  dt-bindings: anybus-controller: move to staging/ tree
  staging: emxx_udc: remove local TRUE/FALSE definition
  staging: wilc1000: look for rtc_clk clock
  staging: dt-bindings: wilc1000: add optional rtc_clk property
  staging: nvec: make use of devm_platform_ioremap_resource
  staging: exfat: drop unused function parameter
  Staging: exfat: Avoid use of strcpy
  staging: exfat: use integer constants
  staging: exfat: cleanup spacing for casts
  staging: exfat: cleanup spacing for operators
  staging: rtl8723bs: hal: remove redundant variable n
  staging: pi433: Fix typo in documentation
  ...

Pull tty/serial driver updates from Greg KH:
 "Even in this age, people are still making new serial port silicon,
  why...

  Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of
  changes in here for a number of embedded serial port devices that are
  being worked on because people really like to see those console
  logs...

  Other than that, nothing major here, no core tty changes that anyone
  should care about.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits)
  serial: tegra: Add PIO mode support
  serial: tegra: report clk rate errors
  serial: tegra: add support to adjust baud rate
  serial: tegra: DT for Adjusted baud rates
  serial: tegra: add support to use 8 bytes trigger
  serial: tegra: set maximum num of uart ports to 8
  serial: tegra: check for FIFO mode enabled status
  dt-binding: serial: tegra: add new chips
  serial: tegra: report error to upper tty layer
  serial: tegra: flush the RX fifo on frame error
  serial: tegra: avoid reg access when clk disabled
  serial: tegra: add support to ignore read
  serial: sprd: correct the wrong sequence of arguments
  dt-bindings: serial: Convert riscv,sifive-serial to json-schema
  serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control
  serial: max310x: Properly set flags in AutoCTS mode
  tty: serial: fix platform_no_drv_owner.cocci warnings
  dt-bindings: serial: Document Freescale LINFlexD UART
  serial: fsl_linflexuart: Update compatible string
  tty: n_gsm: avoid recursive locking with async port hangup
  ...

Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.4-rc1.

  Two major chunks of code are moving out of the tree and into the
  staging directory, uwb and wusb (wireless USB support), because there
  are no devices that actually use this protocol anymore, and what we
  have today probably doesn't work at all given that the maintainers
  left many many years ago. So move it to staging where it will be
  removed in a few releases if no one screams.

  Other than that, lots of little things. The usual gadget and xhci and
  usb serial driver updates, along with a bunch of sysfs file cleanups
  due to the driver core changes to support that. Nothing really major,
  just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: usbcore: Fix slab-out-of-bounds bug during device reset
  usb: cdns3: Remove redundant dev_err call in cdns3_probe()
  USB: rio500: Fix lockdep violation
  USB: rio500: simplify locking
  usb: mtu3: register a USB Role Switch for dual role mode
  usb: common: add USB GPIO based connection detection driver
  usb: common: create Kconfig file
  usb: roles: get usb-role-switch from parent
  usb: roles: Add fwnode_usb_role_switch_get() function
  device connection: Add fwnode_connection_find_match()
  usb: roles: Introduce stubs for the exiting functions in role.h
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  dt-bindings: usb: add binding for USB GPIO based connection detection driver
  dt-bindings: connector: add optional properties for Type-B
  dt-binding: usb: add usb-role-switch property
  usbip: Implement SG support to vhci-hcd and stub driver
  usb: roles: intel: Enable static DRD mode for role switch
  xhci-ext-caps.c: Add property to disable Intel SW switch
  usb: dwc3: remove generic PHY calibrate() calls
  usb: core: phy: add support for PHY calibration
  ...

Pull driver core updates from Greg Kroah-Hartman:
 "Here is the big driver core update for 5.4-rc1.

  There was a bit of a churn in here, with a number of core and OF
  platform patches being added to the tree, and then after much
  discussion and review and a day-long in-person meeting, they were
  decided to be reverted and a new set of patches is currently being
  reviewed on the mailing list.

  Other than that churn, there are two "persistent" branches in here
  that other trees will be pulling in as well during the merge window.
  One branch to add support for drivers to have the driver core
  automatically add sysfs attribute files when a driver is bound to a
  device so that the driver doesn't have to manually do it (and then
  clean it up, as it always gets it wrong).

  There's another branch in here for generic lookup helpers for the
  driver core that lots of busses are starting to use. That's the
  majority of the non-driver-core changes in this patch series.

  There's also some on-going debugfs file creation cleanup that has been
  slowly happening over the past few releases, with the goal to
  hopefully get that done sometime next year.

  All of these have been in linux-next for a while now with no reported
  issues"

[ Note that the above-mentioned generic lookup helpers branch was
  already brought in by the LED merge (commit 4feaab05) that had
  shared it.

  Also note that that common branch introduced an i2c bug due to a bad
  conversion, which got fixed here. - Linus ]

* tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits)
  coccinelle: platform_get_irq: Fix parse error
  driver-core: add include guard to linux/container.h
  sysfs: add BIN_ATTR_WO() macro
  driver core: platform: Export platform_get_irq_optional()
  hwmon: pwm-fan: Use platform_get_irq_optional()
  driver core: platform: Introduce platform_get_irq_optional()
  Revert "driver core: Add support for linking devices during device addition"
  Revert "driver core: Add edit_links() callback for drivers"
  Revert "of/platform: Add functional dependency link from DT bindings"
  Revert "driver core: Add sync_state driver/bus callback"
  Revert "of/platform: Pause/resume sync state during init and of_platform_populate()"
  Revert "of/platform: Create device links for all child-supplier depencencies"
  Revert "of/platform: Don't create device links for default busses"
  Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()"
  Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning"
  Revert "of/platform: Disable generic device linking code for PowerPC"
  devcoredump: fix typo in comment
  devcoredump: use memory_read_from_buffer
  of/platform: Disable generic device linking code for PowerPC
  device.h: Fix warnings for mismatched parameter names in comments
  ...

Pull KVM updates from Paolo Bonzini:
 "s390:
   - ioctl hardening
   - selftests

  ARM:
   - ITS translation cache
   - support for 512 vCPUs
   - various cleanups and bugfixes

  PPC:
   - various minor fixes and preparation

  x86:
   - bugfixes all over the place (posted interrupts, SVM, emulation
     corner cases, blocked INIT)
   - some IPI optimizations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
  KVM: X86: Use IPI shorthands in kvm guest when support
  KVM: x86: Fix INIT signal handling in various CPU states
  KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
  KVM: VMX: Stop the preemption timer during vCPU reset
  KVM: LAPIC: Micro optimize IPI latency
  kvm: Nested KVM MMUs need PAE root too
  KVM: x86: set ctxt->have_exception in x86_decode_insn()
  KVM: x86: always stop emulation on page fault
  KVM: nVMX: trace nested VM-Enter failures detected by H/W
  KVM: nVMX: add tracepoint for failed nested VM-Enter
  x86: KVM: svm: Fix a check in nested_svm_vmrun()
  KVM: x86: Return to userspace with internal error on unexpected exit reason
  KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
  KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
  doc: kvm: Fix return description of KVM_SET_MSRS
  KVM: X86: Tune PLE Window tracepoint
  KVM: VMX: Change ple_window type to unsigned int
  KVM: X86: Remove tailing newline for tracepoints
  KVM: X86: Trace vcpu_id for vmexit
  KVM: x86: Manually calculate reserved bits when loading PDPTRS
  ...

Pull KVM fix from Paolo Bonzini:
 "Fix missing bounds-checking in coalesced_mmio (CVE-2019-14821)"

* tag 'for-linus-urgent' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: coalesced_mmio: add bounds checking

The first/last indexes are typically shared with a user app.
The app can change the 'last' index that the kernel uses
to store the next result.  This change sanity checks the index
before using it for writing to a potentially arbitrary address.

This fixes CVE-2019-14821.

Cc: stable@vger.kernel.org
Fixes: 5f94c174 ("KVM: Add coalesced MMIO support (common part)")
Signed-off-by: Matt Delco <delco@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com
[Use READ_ONCE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull device properties framework updates from Rafael Wysocki:
 "Improve software node support (Heikki Krogerus) and clean up two
  assorted pieces of code (Andy Shevchenko, Geert Uytterhoeven)"

* tag 'devprop-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Initialize the return value in software_node_find_by_name()
  software node: Initialize the return value in software_node_to_swnode()
  ACPI / property: Fix acpi_graph_get_remote_endpoint() name in kerneldoc
  device property: Remove duplicate test for NULL
  platform/x86: intel_cht_int33fe: Use new API to gain access to the role switch
  usb: roles: intel_xhci: Supplying software node for the role mux
  software node: Add software_node_find_by_name()

Pull ACPI updates from Rafael Wysocki:
 "These include an ACPICA update (to upstream revision 20190816),
  improvements of support for memory hot-add in the HMAT handling code
  and some assorted fixes and cleanups.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190816
     including:
      * Internal limits change to support larger systems (Bob Moore).
      * Macros clean up (Bob Moore).
      * printf format string fixes (Bob Moore).
      * Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore).
      * Tools improvements (Bob Moore, Colin Ian King).
      * Windows _OSI support fixes (Jung-uk Kim).

   - Improve memory hot-add support in the ACPI HMAT handling code (Dan
     Williams, Keith Busch).

   - Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to
     save and restore private registers during system-wide suspend and
     resume on systems with the Lynxpoint PCH (Jarkko Nikula).

   - Convert the ACPI documentation related to LEDs to ReST (Sakari
     Ailus).

   - Fix assorted issues and make assorted minor improvements in the
     ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey
     Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang,
     YueHaibing)"

* tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  ACPI / PCI: fix acpi_pci_irq_enable() memory leak
  ACPI: custom_method: fix memory leaks
  ACPI: thermal: Remove redundant acpi_has_method() calls
  ACPI / CPPC: do not require the _PSD method
  ACPI: SBS: remove unused const variable 'SMBUS_PEC'
  ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint
  ACPI/PCI: Remove surplus parentheses from a return statement
  ACPICA: Update version to 20190816.
  ACPICA: Add "Windows 2019" string to _OSI support.
  ACPICA: Differentiate Windows 8.1 from Windows 8.
  ACPICA: Fully deploy ACPI_PRINTF_LIKE macro
  ACPICA: iASL,acpi_dump: Improve y/n query
  ACPICA: Fix issues with arg types within printf format strings
  ACPICA: Macros: remove pointer math on a null pointer
  ACPICA: Increase total number of possible Owner IDs
  ACPICA: Debugger: remove redundant assignment on obj_desc
  Documentation: ACPI: DSD: Convert LED documentation to ReST
  ACPI / APEI: Release resources if gen_pool_add() fails
  HMAT: Skip publishing target info for nodes with no online memory
  HMAT: Register attributes for memory hot add
  ...

Pull power management updates from Rafael Wysocki:
 "These include a rework of the main suspend-to-idle code flow (related
  to the handling of spurious wakeups), a switch over of several users
  of cpufreq notifiers to QoS-based limits, a new devfreq driver for
  Tegra20, a new cpuidle driver and governor for virtualized guests, an
  extension of the wakeup sources framework to expose wakeup sources as
  device objects in sysfs, and more.

  Specifics:

   - Rework the main suspend-to-idle control flow to avoid repeating
     "noirq" device resume and suspend operations in case of spurious
     wakeups from the ACPI EC and decouple the ACPI EC wakeups support
     from the LPS0 _DSM support (Rafael Wysocki).

   - Extend the wakeup sources framework to expose wakeup sources as
     device objects in sysfs (Tri Vo, Stephen Boyd).

   - Expose system suspend statistics in sysfs (Kalesh Singh).

   - Introduce a new haltpoll cpuidle driver and a new matching governor
     for virtualized guests wanting to do guest-side polling in the idle
     loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).

   - Fix the menu and teo cpuidle governors to allow the scheduler tick
     to be stopped if PM QoS is used to limit the CPU idle state exit
     latency in some cases (Rafael Wysocki).

   - Increase the resolution of the play_idle() argument to microseconds
     for more fine-grained injection of CPU idle cycles (Daniel
     Lezcano).

   - Switch over some users of cpuidle notifiers to the new QoS-based
     frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
     policy notifier events (Viresh Kumar).

   - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).

   - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
     (Andrew-sh.Cheng, Fabien Parent).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang).

   - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).

   - Update the qcom cpufreq driver (among other things, to make it
     easier to extend and to use kryo cpufreq for other nvmem-based
     SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
     RAILLARD, Sibi Sankar, Sricharan R).

   - Fix assorted issues and make assorted minor improvements in the
     cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
     Gustavo Silva, Hariprasad Kelam).

   - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
     Bergmann).

   - Add new Exynos PPMU events to devfreq events and extend that
     mechanism (Lukasz Luba).

   - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).

   - Improve devfreq documentation and governor code, fix spelling typos
     in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
     MyungJoo Ham, Gaël PORTAY).

   - Add regulators enable and disable to the OPP (operating performance
     points) framework (Kamil Konieczny).

   - Update the OPP framework to support multiple opp-suspend properties
     (Anson Huang).

   - Fix assorted issues and make assorted minor improvements in the OPP
     code (Niklas Cassel, Viresh Kumar, Yue Hu).

   - Clean up the generic power domains (genpd) framework (Ulf Hansson).

   - Clean up assorted pieces of power management code and documentation
     (Akinobu Mita, Amit Kucheria, Chuhong Yuan).

   - Update the pm-graph tool to version 5.5 including multiple fixes
     and improvements (Todd Brandt).

   - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
     Sébastien Szymanski)"

* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  PM: runtime: Documentation: add runtime_status ABI document
  pm-graph: make setVal unbuffered again for python2 and python3
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  ...

Pull dmaengine updates from Vinod Koul:

 - Move Dmaengine DT bindings to YAML and convert Allwinner to schema.

 - FSL dma device_synchronize implementation

 - DW split acpi and of helpers and updates to driver and support for
   Elkhart Lake

 - Move filter fn as private for omap-dma and edma drivers and
   improvements to these drivers

 - Mark expected switch fall-through in couple of drivers

 - Renames of shdma and nbpfaxi binding document

 - Minor updates to bunch of drivers

* tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits)
  dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits()
  dmaengine: ti: edma: Only reset region0 access registers
  dmaengine: ti: edma: Do not reset reserved paRAM slots
  dmaengine: iop-adma.c: fix printk format warning
  dmaengine: stm32-dma: Use struct_size() helper
  dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property
  dmanegine: ioat/dca: Use struct_size() helper
  dmaengine: iop-adma: remove set but not used variable 'slots_per_op'
  dmaengine: dmatest: Add support for completion polling
  dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  dmaengine: ti: edma: Remove 'Assignment in if condition'
  dmaengine: dw: platform: Split OF helpers to separate module
  dmaengine: dw: platform: Split ACPI helpers to separate module
  dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register()
  dmaengine: dw: platform: Switch to acpi_dma_controller_register()
  dmaengine: dw: platform: Use devm_platform_ioremap_resource()
  dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw: platform: Use struct dw_dma_chip_pdata
  dmaengine: dw: Export struct dw_dma_chip_pdata for wider use
  ...

Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "In this cycle we've finally managed to contribute the patch set
  sorting out LED naming issues. Besides that there are many changes
  scattered among various LED class drivers and triggers.

  LED naming related improvements:

   - add new 'function' and 'color' fwnode properties and deprecate
     'label' property which has been frequently abused for conveying
     vendor specific names that have been available in sysfs anyway

   - introduce a set of standard LED_FUNCTION* definitions

   - introduce a set of standard LED_COLOR_ID* definitions

   - add a new {devm_}led_classdev_register_ext() API with the
     capability of automatic LED name composition basing on the
     properties available in the passed fwnode; the function is
     backwards compatible in a sense that it uses 'label' data, if
     present in the fwnode, for creating LED name

   - add tools/leds/get_led_device_info.sh script for retrieving LED
     vendor, product and bus names, if applicable; it also performs
     basic validation of an LED name

   - update following drivers and their DT bindings to use the new LED
     registration API:

        - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
          leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt

  Other LED class improvements:

   - replace {devm_}led_classdev_register() macros with inlines

   - allow to call led_classdev_unregister() unconditionally

   - switch to use fwnode instead of be stuck with OF one

  LED triggers improvements:

   - led-triggers:
        - fix dereferencing of null pointer
        - fix a memory leak bug

   - ledtrig-gpio:
        - GPIO 0 is valid

  Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
  more complete driver exists, based on a generic driver for the AMD
  SOCs gpio-controller, supporting LEDs as well other devices:

   - drop profile field from priv data

   - drop iosize field from priv data

   - drop enum_apu_led_platform_types

   - drop superseeded apu2/3 led support

   - add pr_fmt prefix for better log output

   - fix error message on probing failure

  Other misc fixes and improvements to existing LED class drivers:

   - leds-ns2, leds-max77650:
        - add of_node_put() before return

   - leds-pwm, leds-is31fl32xx:
        - use struct_size() helper

   - leds-lm3697, leds-lm36274, leds-lm3532:
        - switch to use fwnode_property_count_uXX()

   - leds-lm3532:
        - fix brightness control for i2c mode
        - change the define for the fs current register
        - fixes for the driver for stability
        - add full scale current configuration
        - dt: Add property for full scale current.
        - avoid potentially unpaired regulator calls
        - move static keyword to the front of declarations
        - fix optional led-max-microamp prop error handling

   - leds-max77650:
        - add of_node_put() before return
        - add MODULE_ALIAS()
        - Switch to fwnode property API

   - leds-as3645a:
        - fix misuse of strlcpy

   - leds-netxbig:
        - add of_node_put() in netxbig_leds_get_of_pdata()
        - remove legacy board-file support

   - leds-is31fl319x:
        - simplify getting the adapter of a client

   - leds-ti-lmu-common:
        - fix coccinelle issue
        - move static keyword to the front of declaration

   - leds-syscon:
        - use resource managed variant of device register

   - leds-ktd2692:
        - fix a typo in the name of a constant

   - leds-lp5562:
        - allow firmware files up to the maximum length

   - leds-an30259a:
        - fix typo

   - leds-pca953x:
        - include the right header"

* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
  leds: lm3532: Fix optional led-max-microamp prop error handling
  led: triggers: Fix dereferencing of null pointer
  leds: ti-lmu-common: Move static keyword to the front of declaration
  leds: lm3532: Move static keyword to the front of declarations
  leds: trigger: gpio: GPIO 0 is valid
  leds: pwm: Use struct_size() helper
  leds: is31fl32xx: Use struct_size() helper
  leds: ti-lmu-common: Fix coccinelle issue in TI LMU
  leds: lm3532: Avoid potentially unpaired regulator calls
  leds: syscon: Use resource managed variant of device register
  leds: Replace {devm_}led_classdev_register() macros with inlines
  leds: Allow to call led_classdev_unregister() unconditionally
  leds: lm3532: Add full scale current configuration
  dt: lm3532: Add property for full scale current.
  leds: lm3532: Fixes for the driver for stability
  leds: lm3532: Change the define for the fs current register
  leds: lm3532: Fix brightness control for i2c mode
  leds: Switch to use fwnode instead of be stuck with OF one
  leds: max77650: Switch to fwnode property API
  led: triggers: Fix a memory leak bug
  ...

Pull media updates from Mauro Carvalho Chehab:

 - a new sensor driver for ov5675

 - a new platform driver for Allwinner A10 sensor interface

 - some new remote controller keymaps

 - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to
   merge two core modules into one

 - removal of bcm2048 radio driver from staging

 - removal of davinci_vpfe video driver from staging

 - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1
   core

 - added some documentation for remote controller protocols

 - pixel format documentation was split on two files

 - lots of other driver improvements and cleanups

* tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  media: videobuf-core.c: poll_wait needs a non-NULL buf pointer
  media: sun4i: Make sun4i_csi_formats static
  media: imx: remove unused including <linux/version.h>
  media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe()
  media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code
  media: em28xx: Fix exception handling in em28xx_alloc_urbs()
  media: don't do a 31 bit shift on a signed int
  media: use the BIT() macro
  media: ov9650: add a sanity check
  media: aspeed-video: address a protential usage of an unitialized var
  media: vicodec: make life easier for static analyzers
  media: remove include stdarg.h from some drivers
  v4l2-core: fix coding style for the two new c files
  media: v4l2-core: Remove BUG() from i2c and spi helpers
  media: v4l2-core: introduce a helper to unregister a i2c subdev
  media: v4l2-core: introduce a helper to unregister a spi subdev
  media: v4l2-core: move i2c helpers out of v4l2-common.c
  media: v4l2-core: move spi helpers out of v4l2-common.c
  media: v4l2-core: Module re-organization
  media: usbvision: Remove dead code
  ...