- 15 May, 2020 2 commits
-
-
Eugeniu Rosca authored
On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]: > This patch prevents my Raven Ridge xHCI from getting runtime suspend. The problem described in v5.6 commit 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") applies solely to the USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board, manufactured by Shimafuji Electric Inc [3]. Despite that, the aforementioned commit applied the quirk to _all_ hubs carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than initially expected. Consequently, the quirk is now enabled on platforms carrying SMSC/Microchip hub models which potentially don't exhibit the original issue. To avoid reports like [1], further limit the quirk's scope to USB5534B [2], by employing both Vendor and Product ID checks. Tested on H3ULCB + Kingfisher rev. M05. [1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/ [2] https://www.microchip.com/wwwproducts/en/USB5534B [3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf [4] https://devicehunt.com/search/type/usb/vendor/0424/device/any Fixes: 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org # v4.14+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hardik Gajjar <hgajjar@de.adit-jv.com> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.7-rc6 The main part here are the important fixes for the raw-gadget before it becomes an ABI. We're adding support for stall/halt/wedge which is actually pretty important in many situations. There's also a NULL pointer deref fix. Apart from raw-gadget, I've included some recent sparse fixes to a few drivers. Signed-off-by:
Felipe Balbi <balbi@kernel.org> * tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: cdns3: gadget: make a bunch of functions static usb: mtu3: constify struct debugfs_reg32 usb: gadget: udc: atmel: Make some symbols static usb: raw-gadget: fix null-ptr-deref when reenabling endpoints usb: raw-gadget: documentation updates usb: raw-gadget: support stalling/halting/wedging endpoints usb: raw-gadget: fix gadget endpoint selection usb: raw-gadget: improve uapi headers comments
-
- 14 May, 2020 11 commits
-
-
Greg Kroah-Hartman authored
In commit 2bef9aed ("usb: usbfs: correct kernel->user page attribute mismatch") we switched from always calling remap_pfn_range() to call dma_mmap_coherent() to handle issues with systems with non-coherent USB host controller drivers. Unfortunatly, as syzbot quickly told us, not all the world is host controllers with DMA support, so we need to check what host controller we are attempting to talk to before doing this type of allocation. Thanks to Christoph for the quick idea of how to fix this. Fixes: 2bef9aed ("usb: usbfs: correct kernel->user page attribute mismatch") Cc: Christoph Hellwig <hch@lst.de> Cc: Hillf Danton <hdanton@sina.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com Reviewed-by:
Jeremy Linton <jeremy.linton@arm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Li Jun authored
While removing the host (e.g. for USB role switch from host to device), if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3 platforms. Keeping the xhci-plat device active during host removal, and disabling runtime pm before calling pm_runtime_set_suspended() fixes them. oops1: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000240 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty Hardware name: FSL i.MX8MP EVK (DT) Workqueue: pm pm_runtime_work pstate: 60000005 (nZCv daif -PAN -UAO) pc : xhci_suspend+0x34/0x698 lr : xhci_plat_runtime_suspend+0x2c/0x38 sp : ffff800011ddbbc0 Call trace: xhci_suspend+0x34/0x698 xhci_plat_runtime_suspend+0x2c/0x38 pm_generic_runtime_suspend+0x28/0x40 __rpm_callback+0xd8/0x138 rpm_callback+0x24/0x98 rpm_suspend+0xe0/0x448 rpm_idle+0x124/0x140 pm_runtime_work+0xa0/0xf8 process_one_work+0x1dc/0x370 worker_thread+0x48/0x468 kthread+0xf0/0x120 ret_from_fork+0x10/0x1c oops2: usb 2-1: USB disconnect, device number 2 xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb2: USB disconnect, device number 1 xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb1: USB disconnect, device number 1 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000138 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578 Hardware name: Freescale i.MX8QXP MEK (DT) Workqueue: 1-0050 tcpm_state_machine_work pstate: 20000005 (nzCv daif -PAN -UAO) pc : xhci_free_dev+0x214/0x270 lr : xhci_plat_runtime_resume+0x78/0x88 sp : ffff80001006b5b0 Call trace: xhci_free_dev+0x214/0x270 xhci_plat_runtime_resume+0x78/0x88 pm_generic_runtime_resume+0x30/0x48 __rpm_callback+0x90/0x148 rpm_callback+0x28/0x88 rpm_resume+0x568/0x758 rpm_resume+0x260/0x758 rpm_resume+0x260/0x758 __pm_runtime_resume+0x40/0x88 device_release_driver_internal+0xa0/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 usb_disable_device+0xb0/0x268 usb_disconnect+0xcc/0x300 usb_remove_hcd+0xf4/0x1dc xhci_plat_remove+0x78/0xe0 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xfc/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 platform_device_del.part.0+0x20/0x90 platform_device_unregister+0x28/0x40 cdns3_host_exit+0x20/0x40 cdns3_role_stop+0x60/0x90 cdns3_role_set+0x64/0xd8 usb_role_switch_set_role.part.0+0x3c/0x68 usb_role_switch_set_role+0x20/0x30 tcpm_mux_set+0x60/0xf8 tcpm_reset_port+0xa4/0xf0 tcpm_detach.part.0+0x28/0x50 tcpm_state_machine_work+0x12ac/0x2360 process_one_work+0x1c8/0x470 worker_thread+0x50/0x428 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01) ---[ end trace 45b1a173d2679e44 ]--- [minor commit message cleanup -Mathias] Cc: Baolin Wang <baolin.wang@linaro.org> Cc: <stable@vger.kernel.org> Fixes: b0c69b4b ("usb: host: plat: Enable xHCI plat runtime PM") Reviewed-by:
Peter Chen <peter.chen@nxp.com> Tested-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.comSigned-off-by:
-
Sriharsha Allenki authored
On platforms with IOMMU enabled, multiple SGs can be coalesced into one by the IOMMU driver. In that case the SG list processing as part of the completion of a urb on a bulk endpoint can result into a NULL pointer dereference with the below stack dump. <6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c <6> pgd = c0004000 <6> [0000000c] *pgd=00000000 <6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM <2> PC is at xhci_queue_bulk_tx+0x454/0x80c <2> LR is at xhci_queue_bulk_tx+0x44c/0x80c <2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3 <2> sp : ca337c80 ip : 00000000 fp : ffffffff <2> r10: 00000000 r9 : 50037000 r8 : 00004000 <2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000 <2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000 <2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none <2> Control: 10c0383d Table: b412c06a DAC: 00000051 <6> Process usb-storage (pid: 5961, stack limit = 0xca336210) <snip> <2> [<c08907c4>] (xhci_queue_bulk_tx) <2> [<c0881b3c>] (xhci_urb_enqueue) <2> [<c0831068>] (usb_hcd_submit_urb) <2> [<c08350b4>] (usb_sg_wait) <2> [<c089f384>] (usb_stor_bulk_transfer_sglist) <2> [<c089f2c0>] (usb_stor_bulk_srb) <2> [<c089fe38>] (usb_stor_Bulk_transport) <2> [<c089f468>] (usb_stor_invoke_transport) <2> [<c08a11b4>] (usb_stor_control_thread) <2> [<c014a534>] (kthread) The above NULL pointer dereference is the result of block_len and the sent_len set to zero after the first SG of the list when IOMMU driver is enabled. Because of this the loop of processing the SGs has run more than num_sgs which resulted in a sg_next on the last SG of the list which has SG_END set. Fix this by check for the sg before any attributes of the sg are accessed. [modified reason for null pointer dereference in commit message subject -Mathias] Fixes: f9c589e1 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> Signed-off-by:
-
Jason Yan authored
Fix the following sparse warning: drivers/usb/cdns3/gadget.c:85:6: warning: symbol 'cdns3_clear_register_bit' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:140:26: warning: symbol 'cdns3_next_align_buf' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:151:22: warning: symbol 'cdns3_next_priv_request' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:193:5: warning: symbol 'cdns3_ring_size' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:348:6: warning: symbol 'cdns3_move_deq_to_next_trb' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:514:20: warning: symbol 'cdns3_wa2_gadget_giveback' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:554:5: warning: symbol 'cdns3_wa2_gadget_ep_queue' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:839:6: warning: symbol 'cdns3_wa1_restore_cycle_bit' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:1907:6: warning: symbol 'cdns3_stream_ep_reconfig' was not declared. Should it be static? drivers/usb/cdns3/gadget.c:1928:6: warning: symbol 'cdns3_configure_dmult' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Rikard Falkeborn authored
mtu3_prb_regs is never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 19966 7120 0 27086 69ce drivers/usb/mtu3/mtu3_debugfs.o After: text data bss dec hex filename 20142 6992 0 27134 69fe drivers/usb/mtu3/mtu3_debugfs.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Samuel Zou authored
Fix the following sparse warnings: drivers/usb/gadget/udc/atmel_usba_udc.c:188:30: warning: symbol 'queue_dbg_fops' was not declared. drivers/usb/gadget/udc/atmel_usba_udc.c:196:30: warning: symbol 'regs_dbg_fops' was not declared. queue_dbg_fops and regs_dbg_fops have only call within atmel_usba_udc.c They should be static Fixes: 914a3f3b ("USB: add atmel_usba_udc driver") Reported-by:
Samuel Zou <zou_wei@huawei.com> Signed-off-by:
-
Andrey Konovalov authored
Currently we preassign gadget endpoints to raw-gadget endpoints during initialization. Fix resetting this assignment in raw_ioctl_ep_disable(), otherwise we will get null-ptr-derefs when an endpoint is reenabled. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Andrey Konovalov authored
Mention the issue with fixed UDC addresses. Links external examples and test suite. Add more implmenetation details and potential improvements. Signed-off-by:
-
Andrey Konovalov authored
Raw Gadget is currently unable to stall/halt/wedge gadget endpoints, which is required for proper emulation of certain USB classes. This patch adds a few more ioctls: - USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint #0 when there's a pending setup request for it. - USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status on non-control non-isochronous endpoints. Fixes: f2c2e717 ("usb: gadget: add raw-gadget interface") Signed-off-by:
-
Andrey Konovalov authored
Currently automatic gadget endpoint selection based on required features doesn't work. Raw Gadget tries iterating over the list of available endpoints and finding one that has the right direction and transfer type. Unfortunately selecting arbitrary gadget endpoints (even if they satisfy feature requirements) doesn't work, as (depending on the UDC driver) they might have fixed addresses, and one also needs to provide matching endpoint addresses in the descriptors sent to the host. The composite framework deals with this by assigning endpoint addresses in usb_ep_autoconfig() before enumeration starts. This approach won't work with Raw Gadget as the endpoints are supposed to be enabled after a set_configuration/set_interface request from the host, so it's too late to patch the endpoint descriptors that had already been sent to the host. For Raw Gadget we take another approach. Similarly to GadgetFS, we allow the user to make the decision as to which gadget endpoints to use. This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that exposes information about all non-control endpoints that a currently connected UDC has. This information includes endpoints addresses, as well as their capabilities and limits to allow the user to choose the most fitting gadget endpoint. The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint validation routine usb_gadget_ep_match_desc(). These changes affect the portability of the gadgets that use Raw Gadget when running on different UDCs. Nevertheless, as long as the user relies on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically choose endpoint addresses, UDC-agnostic gadgets can still be written with Raw Gadget. Fixes: f2c2e717 ("usb: gadget: add raw-gadget interface") Signed-off-by:
-
Andrey Konovalov authored
Fix typo "trasferred" => "transferred". Don't call USB requests URBs. Fix comment style. Signed-off-by:
-
- 13 May, 2020 2 commits
-
-
Prashant Malani authored
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev 0.6, the PMC HPD request LVL bit field is bit 4. Fix the definition here to match the programming guide. Since this bit field is changing, explicitly define a field for the HPD_HIGH mode data bit. Signed-off-by:
Prashant Malani <pmalani@chromium.org> Fixes: 6701adfa ("usb: typec: driver for Intel PMC mux control") Reviewed-by:
Benson Leung <bleung@chromium.org> Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200511091837.102508-1-pmalani@chromium.orgSigned-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.7-rc5 Fixing raw-gadget's IOCTL return value. Enabling EXTCON for Intel Merrifield. Couple leaks have been plugged in net2272 and twl6030-usb. Returning an error code when things fail in cdc and ncm legacy gadgets. An old bug on dwc3 regarding HWO bit handling has been fixed. Apart from these, some minor fixes. Signed-off-by:
-
- 10 May, 2020 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Ensure that direct mapping alias is always flushed when changing page attributes. The optimization for small ranges failed to do so when the virtual address was in the vmalloc or module space. - Unbreak the trace event registration for syscalls without arguments caused by the refactoring of the SYSCALL_DEFINE0() macro. - Move the printk in the TSC deadline timer code to a place where it is guaranteed to only be called once during boot and cannot be rearmed by clearing warn_once after boot. If it's invoked post boot then lockdep rightfully complains about a potential deadlock as the calling context is different. - A series of fixes for objtool and the ORC unwinder addressing variety of small issues: - Stack offset tracking for indirect CFAs in objtool ignored subsequent pushs and pops - Repair the unwind hints in the register clearing entry ASM code - Make the unwinding in the low level exit to usermode code stop after switching to the trampoline stack. The unwind hint is no longer valid and the ORC unwinder emits a warning as it can't find the registers anymore. - Fix unwind hints in switch_to_asm() and rewind_stack_do_exit() which caused objtool to generate bogus ORC data. - Prevent unwinder warnings when dumping the stack of a non-current task as there is no way to be sure about the validity because the dumped stack can be a moving target. - Make the ORC unwinder behave the same way as the frame pointer unwinder when dumping an inactive tasks stack and do not skip the first frame. - Prevent ORC unwinding before ORC data has been initialized - Immediately terminate unwinding when a unknown ORC entry type is found. - Prevent premature stop of the unwinder caused by IRET frames. - Fix another infinite loop in objtool caused by a negative offset which was not catched. - Address a few build warnings in the ORC unwinder and add missing static/ro_after_init annotations" * tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES x86/apic: Move TSC deadline timer debug printk ftrace/x86: Fix trace event registration for syscalls without arguments x86/mm/cpa: Flush direct map alias during cpa objtool: Fix infinite loop in for_offset_range() x86/unwind/orc: Fix premature unwind stoppage due to IRET frames x86/unwind/orc: Fix error path for bad ORC entry type x86/unwind/orc: Prevent unwinding before ORC initialization x86/unwind/orc: Don't skip the first frame for inactive tasks x86/unwind: Prevent false warnings for non-current tasks x86/unwind/orc: Convert global variables to static x86/entry/64: Fix unwind hints in rewind_stack_do_exit() x86/entry/64: Fix unwind hints in __switch_to_asm() x86/entry/64: Fix unwind hints in kernel exit path x86/entry/64: Fix unwind hints in register clearing code objtool: Fix stack offset tracking for indirect CFAs -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Thomas Gleixner: "A single fix for objtool to prevent an infinite loop in the jump table search which can be triggered when building the kernel with '-ffunction-sections'" * tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix infinite loop in find_jump_table()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "A single fix for the fallout of the recent futex uacess rework. With those changes GCC9 fails to analyze arch_futex_atomic_op_inuser() correctly and emits a 'maybe unitialized' warning. While we usually ignore compiler stupidity the conditional store is pointless anyway because the correct case has to store. For the fault case the extra store does no harm" * tag 'locking-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM: futex: Address build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Race condition fixes for the AMD IOMMU driver. These are five patches fixing two race conditions around increase_address_space(). The first race condition was around the non-atomic update of the domain page-table root pointer and the variable containing the page-table depth (called mode). This is fixed now be merging page-table root and mode into one 64-bit field which is read/written atomically. The second race condition was around updating the page-table root pointer and making it public before the hardware caches were flushed. This could cause addresses to be mapped and returned to drivers which are not reachable by IOMMU hardware yet, causing IO page-faults. This is fixed too by adding the necessary flushes before a new page-table root is published. Related to the race condition fixes these patches also add a missing domain_flush_complete() barrier to update_domain() and a fix to bail out of the loop which tries to increase the address space when the call to increase_address_space() fails. Qian was able to trigger the race conditions under high load and memory pressure within a few days of testing. He confirmed that he has seen no issues anymore with the fixes included here. - Fix for a list-handling bug in the VirtIO IOMMU driver. * tag 'iommu-fixes-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/virtio: Reverse arguments to list_add iommu/amd: Do not flush Device Table in iommu_map_page() iommu/amd: Update Device Table in increase_address_space() iommu/amd: Call domain_flush_complete() in update_domain() iommu/amd: Do not loop forever when trying to increase address space iommu/amd: Fix race in increase_address_space()/fetch_pte()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - a small series fixing a use-after-free of bdi name (Christoph,Yufen) - NVMe fix for a regression with the smaller CQ update (Alexey) - NVMe fix for a hang at namespace scanning error recovery (Sagi) - fix race with blk-iocost iocg->abs_vdebt updates (Tejun) * tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block: nvme: fix possible hang when ns scanning fails during error recovery nvme-pci: fix "slimmer CQ head update" bdi: add a ->dev_name field to struct backing_dev_info bdi: use bdi_dev_name() to get device name bdi: move bdi_dev_name out of line vboxsf: don't use the source name in the bdi name iocost: protect iocg->abs_vdebt with iocg->waitq.lock
-
Linus Torvalds authored
It seems that for whatever reason, gcc-10 ends up not inlining a couple of functions that used to be inlined before. Even if they only have one single callsite - it looks like gcc may have decided that the code was unlikely, and not worth inlining. The code generation difference is harmless, but caused a few new section mismatch errors, since the (now no longer inlined) function wasn't in the __init section, but called other init functions: Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap() So add the appropriate __init annotation to make modpost not complain. In both cases there were trivially just a single callsite from another __init function. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 May, 2020 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "A smattering of fixes and cleanups: - Dead code removal. - Exporting riscv_cpuid_to_hartid_mask for modules. - Per-CPU tracking of ISA features. - Setting max_pfn correctly when probing memory. - Adding a note to the VDSO so glibc can check the kernel's version without a uname(). - A fix to force the bootloader to initialize the boot spin tables, which still get used as a fallback when SBI-0.1 is enabled" * tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Remove unused code from STRICT_KERNEL_RWX riscv: force __cpu_up_ variables to put in data section riscv: add Linux note to vdso riscv: set max_pfn to the PFN of the last page RISC-V: Remove N-extension related defines RISC-V: Add bitmap reprensenting ISA features common across CPUs RISC-V: Export riscv_cpuid_to_hartid_mask() API -
Linus Torvalds authored
gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by: -
Linus Torvalds authored
gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by: -
Linus Torvalds authored
This is the final array bounds warning removal for gcc-10 for now. Again, the warning is good, and we should re-enable all these warnings when we have converted all the legacy array declaration cases to flexible arrays. But in the meantime, it's just noise. Signed-off-by: -
Sagi Grimberg authored
When the controller is reconnecting, the host fails I/O and admin commands as the host cannot reach the controller. ns scanning may revalidate namespaces during that period and it is wrong to remove namespaces due to these failures as we may hang (see 205da243). One command that may fail is nvme_identify_ns_descs. Since we return success due to having ns identify descriptor list optional, we continue to compare ns identifiers in nvme_revalidate_disk, obviously fail and return -ENODEV to nvme_validate_ns, which will remove the namespace. Exactly what we don't want to happen. Fixes: 22802bf7 ("nvme: Namepace identification descriptor list is optional") Tested-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Alexey Dobriyan authored
Pre-incrementing ->cq_head can't be done in memory because OOB value can be observed by another context. This devalues space savings compared to original code :-\ $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32) Function old new delta nvme_poll_irqdisable 464 456 -8 nvme_poll 455 447 -8 nvme_irq 388 380 -8 nvme_dev_disable 955 947 -8 But the code is minimal now: one read for head, one read for q_depth, one increment, one comparison, single instruction phase bit update and one write for new head. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reported-by:
John Garry <john.garry@huawei.com> Tested-by:
-
Christoph Hellwig authored
Cache a copy of the name for the life time of the backing_dev_info structure so that we can reference it even after unregistering. Fixes: 68f23b89 ("memcg: fix a crash in wb_workfn when a device disappears") Reported-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Yufen Yu authored
Use the common interface bdi_dev_name() to get device name. Signed-off-by:
-
Linus Torvalds authored
This is another fine warning, related to the 'zero-length-bounds' one, but hitting the same historical code in the kernel. Because C didn't historically support flexible array members, we have code that instead uses a one-sized array, the same way we have cases of zero-sized arrays. The one-sized arrays come from either not wanting to use the gcc zero-sized array extension, or from a slight convenience-feature, where particularly for strings, the size of the structure now includes the allocation for the final NUL character. So with a "char name[1];" at the end of a structure, you can do things like v = my_malloc(sizeof(struct vendor) + strlen(name)); and avoid the "+1" for the terminator. Yes, the modern way to do that is with a flexible array, and using 'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That also technically gets the size "more correct" in that it avoids any alignment (and thus padding) issues, but this is another long-term cleanup thing that will not happen for 5.7. So disable the warning for now, even though it's potentially quite useful. Having a slew of warnings that then hide more urgent new issues is not an improvement. Signed-off-by: -
Linus Torvalds authored
This is a fine warning, but we still have a number of zero-length arrays in the kernel that come from the traditional gcc extension. Yes, they are getting converted to flexible arrays, but in the meantime the gcc-10 warning about zero-length bounds is very verbose, and is hiding other issues. I missed one actual build failure because it was hidden among hundreds of lines of warning. Thankfully I caught it on the second go before pushing things out, but it convinced me that I really need to disable the new warnings for now. We'll hopefully be all done with our conversion to flexible arrays in the not too distant future, and we can then re-enable this warning. Signed-off-by: -
Linus Torvalds authored
We have some rather random rules about when we accept the "maybe-initialized" warnings, and when we don't. For example, we consider it unreliable for gcc versions < 4.9, but also if -O3 is enabled, or if optimizing for size. And then various kernel config options disabled it, because they know that they trigger that warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES). And now gcc-10 seems to be introducing a lot of those warnings too, so it falls under the same heading as 4.9 did. At the same time, we have a very straightforward way to _enable_ that warning when wanted: use "W=2" to enable more warnings. So stop playing these ad-hoc games, and just disable that warning by default, with the known and straight-forward "if you want to work on the extra compiler warnings, use W=123". Would it be great to have code that is always so obvious that it never confuses the compiler whether a variable is used initialized or not? Yes, it would. In a perfect world, the compilers would be smarter, and our source code would be simpler. That's currently not the world we live in, though. Signed-off-by: -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Fix finish_wait() balancing in file cancelation (Xiaoguang) - Ensure early cleanup of resources in ring map failure (Xiaoguang) - Ensure IORING_OP_SLICE does the right file mode checks (Pavel) - Remove file opening from openat/openat2/statx, it's not needed and messes with O_PATH * tag 'io_uring-5.7-2020-05-08' of git://git.kernel.dk/linux-block: io_uring: don't use 'fd' for openat/openat2/statx splice: move f_mode checks to do_{splice,tee}() io_uring: handle -EFAULT properly in io_uring_setup() io_uring: fix mismatched finish_wait() calls in io_uring_cancel_files()
-
Andrey Konovalov authored
They must return the number of bytes transferred during the data stage. Fixes: 068fbff4 ("usb: raw-gadget: Fix copy_to/from_user() checks") Fixes: f2c2e717 ("usb: gadget: add raw-gadget interface") Signed-off-by:
-
Arnd Bergmann authored
Calling into the role switch API requires that these functions are loaded, if they are in a loadable module and dwc3 itself is built-in, this produces a link error: drivers/usb/dwc3/drd.o: In function `dwc3_usb_role_switch_get': drd.c:(.text+0x26): undefined reference to `usb_role_switch_get_drvdata' drivers/usb/dwc3/drd.o: In function `dwc3_usb_role_switch_set': drd.c:(.text+0x97): undefined reference to `usb_role_switch_get_drvdata' drivers/usb/dwc3/drd.o: In function `dwc3_drd_init': drd.c:(.text+0x1ca7): undefined reference to `usb_role_switch_register' drivers/usb/dwc3/drd.o: In function `dwc3_drd_exit': drd.c:(.text+0x1e92): undefined reference to `usb_role_switch_unregister' Select the USB_ROLE_SWITCH symbol from dwc3 in that configuration. Fixes: 0339f7fb ("usb: dwc3: fix up for role switch API change") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Wei Yongjun authored
If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: 1156e91d ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities") Reported-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796ae ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by:
-
Masahiro Yamada authored
Fix the following cppcheck warnings: drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$ value = -EOPNOTSUPP; ^ drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized int value = -EOPNOTSUPP; ^ drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten value = -EOPNOTSUPP; ^ drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$ value = -EINVAL; ^ drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized ssize_t value = len, length = len; ^ drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten value = -EINVAL; ^ Acked-by:Alan Stern <stern@rowland.harvard.edu> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Thierry Reding authored
When the XUDC device is idle (i.e. powergated), care must be taken not to access any registers because that would lead to a crash. Move the call to tegra_xudc_device_mode_off() into the same conditional as the tegra_xudc_powergate() call to make sure we only force device mode off if the XUDC is actually powered up. Fixes: 49db4272 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Acked-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
