- 29 Sep, 2015 16 commits
-
-
Geoff Levand authored
Fixes the output of 'modinfo --field firmware'. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Miaoqing Pan authored
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/ 2015-August/034979.html. As the peak detect calibration is set incorrectly. Signed-off-by:
Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by:
-
Joe Perches authored
The mwifiex_dbg macro has two tests that could be consolidated into a function reducing overall object size ~10KB (~4%). So convert the macro into a function. $ size drivers/net/wireless/mwifiex/built-in.o* (x86-64 defconfig) text data bss dec hex filename 233102 8628 4809 246539 3c30b drivers/net/wireless/mwifiex/built-in.o.new 243949 8628 4809 257386 3ed6a drivers/net/wireless/mwifiex/built-in.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Hante Meuleman authored
When PCIE type devices are being FW reloaded without being properly reset then the device ends up in a locked state, requiring the device to be completely powered down. This patch adds a reset through watchdog at the moment the device (cores) has been recognized. This will solve warm reboot issues. Cc: Rafal Milecki <zajec5@gmail.com> Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
In case of error during brcmf_bus_start() the network interfaces were freed using free_netdev(). However, the interfaces may have additional memory allocated which is not freed. The netdev has destructor set to brcmf_cfg80211_free_netdev() which frees the additional memory if allocated and call free_netdev(). The brcmf_net_detach() either calls brcmf_cfg80211_free_netdev() directly or uses unregister_netdev() when struct net_device::reg_state indicates the netdev was registered. Reported-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
Instead of passing ifidx and drvr just pass struct brcmf_if pointer which holds both parameters. Reviewed-by:
-
Arend van Spriel authored
The brcmf_fws_txstatus_suppressed() function prototype specifies an ifidx parameter which is not used within the function implementation. Reviewed-by:
-
Arend van Spriel authored
Both PCIe and SDIO devices have the possibility to log the firmware console output in kernel log. For PCIe it is logged when PCIE debug level is enabled. For SDIO it is logged when user specifies a non-zero console interval through debugfs. This patch tries to make it a bit more consistent. The firmware console output is only logged when FWCON debug level is enabled. Reviewed-by:
Pontus Fuchs <pontusf@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Because the P2P Device interface in firmware uses the same interface index as the primary interface we use the bsscfg index as index in the struct brcmf_pub::iflist. However, in the data path we get the interface index and not the bsscfg index. So we need a mapping of interface index to bsscfg index, which can be determined upon handle adding the interface. Reviewed-by:
-
Arend van Spriel authored
Most call sites of brcmf_txfinalize already have struct brcmf_if instance so pass that to brcmf_txfinalize() as the function needs it anyway. Reviewed-by:
-
Arend van Spriel authored
The knowledge on how to map the interface index to a struct brcmf_if instance is in brcmf_get_ifp() so use that function when only the interface index is known instead of accessing brcmf_pub::iflist directly. Reviewed-by:
-
Arend van Spriel authored
The p2pdev interface is setup in firmware resulting in a interface event. This event has role and no-if flag. When role is p2p client and no-if flag is set it indicates that this is the p2pdev interface. This info is used in handling the event and adding interface in the driver. Reviewed-by:
-
Arend van Spriel authored
In brcmf_bus_start() the function brcmf_cfg80211_attach() is called which may fail. If this happens we should not call brcmf_cfg80211_detach() in the failure path as it will result in NULL pointer dereference: brcmf_fweh_activate_events: Set event_msgs error (-5) brcmf_bus_start: failed: -5 brcmf_sdio_firmware_callback: dongle is not responding BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 IP: [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: brcmfmac(O) brcmutil(O) cfg80211 auth_rpcgss CPU: 1 PID: 45 Comm: kworker/1:1 Tainted: G O Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 Workqueue: events request_firmware_work_func task: ffff880036c09ac0 ti: ffff880036dd4000 task.ti: ffff880036dd4000 RIP: 0010:[<ffffffff811e8f08>] [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0 RSP: 0018:ffff880036dd7a28 EFLAGS: 00010246 RAX: ffff880036c09ac0 RBX: 0000000000000000 RCX: 000000007fffffff RDX: 0000000000000000 RSI: ffffffff816578b9 RDI: 0000000000000000 RBP: ffff880036dd7a48 R08: 0000000000000000 R09: ffff880036c0b340 R10: 00000000000002ec R11: ffff880036dd7b08 R12: ffffffff816578b9 R13: 0000000000000000 R14: ffffffff816578b9 R15: ffff8800c6c87000 FS: 0000000000000000(0000) GS:ffff88012bc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000068 CR3: 0000000001a0b000 CR4: 00000000000006e0 Stack: 0000000000000000 ffffffff816578b9 0000000000000000 ffff8800c0d003c8 ffff880036dd7a78 ffffffff811e8ff5 0000000ffffffff1 ffffffff81a9b060 ffff8800c789f880 ffff8800c0d00000 ffff880036dd7a98 ffffffff811ebe0d Call Trace: [<ffffffff811e8ff5>] kernfs_find_and_get_ns+0x35/0x60 [<ffffffff811ebe0d>] sysfs_unmerge_group+0x1d/0x60 [<ffffffff81404ef2>] dpm_sysfs_remove+0x22/0x60 [<ffffffff813f9db9>] device_del+0x49/0x240 [<ffffffff815da768>] rfkill_unregister+0x58/0xc0 [<ffffffffa06bd91b>] wiphy_unregister+0xab/0x2f0 [cfg80211] [<ffffffffa0742fe3>] brcmf_cfg80211_detach+0x23/0x50 [brcmfmac] [<ffffffffa074d986>] brcmf_detach+0x86/0xe0 [brcmfmac] [<ffffffffa0757de8>] brcmf_sdio_remove+0x48/0x120 [brcmfmac] [<ffffffffa0758ed9>] brcmf_sdiod_remove+0x29/0xd0 [brcmfmac] [<ffffffffa0759031>] brcmf_ops_sdio_remove+0xb1/0x110 [brcmfmac] [<ffffffffa001c267>] sdio_bus_remove+0x37/0x100 [mmc_core] [<ffffffff813fe026>] __device_release_driver+0x96/0x130 [<ffffffff813fe0e3>] device_release_driver+0x23/0x30 [<ffffffffa0754bc8>] brcmf_sdio_firmware_callback+0x2a8/0x5d0 [brcmfmac] [<ffffffffa074deaf>] brcmf_fw_request_nvram_done+0x15f/0x5e0 [brcmfmac] [<ffffffff8140142f>] ? devres_add+0x3f/0x50 [<ffffffff810642b5>] ? usermodehelper_read_unlock+0x15/0x20 [<ffffffff81400000>] ? platform_match+0x70/0xa0 [<ffffffff8140f400>] request_firmware_work_func+0x30/0x60 [<ffffffff8106828c>] process_one_work+0x14c/0x3d0 [<ffffffff8106862a>] worker_thread+0x11a/0x450 [<ffffffff81068510>] ? process_one_work+0x3d0/0x3d0 [<ffffffff8106d692>] kthread+0xd2/0xf0 [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180 [<ffffffff815ed35f>] ret_from_fork+0x3f/0x70 [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180 Code: e9 40 fe ff ff 48 89 d8 eb 87 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 56 49 89 f6 41 55 49 89 d5 31 d2 41 54 53 <0f> b7 47 68 48 8b 5f 48 66 c1 e8 05 83 e0 01 4d 85 ed 0f b6 c8 RIP [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0 RSP <ffff880036dd7a28> CR2: 0000000000000068 ---[ end trace 87d6ec0d3fe46740 ]--- Reported-by:
-
Arend van Spriel authored
Just pass the interface to be removed, ie. the struct brcmf_if instance. Reviewed-by:
-
Arend van Spriel authored
Avoid spreading the ifidx in the driver, but have it return the struct brcmf_if instance. Reviewed-by:
-
Arend van Spriel authored
In rx path the firmware provide an interface index which is used to map to a struct brcmf_if instance. However, this involves some trick that is done in two places. This is changed by having driver core providing brcmf_get_ifp() function. Reviewed-by:
-
- 26 Sep, 2015 1 commit
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2015-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * some debugfs improvements; * fix signedness in beacon statistics; * deinline some functions to reduce size when device tracing is enabled; * filter beacons out in AP mode when no stations are associated; * deprecate firmwares version -12; * fix a runtime PM vs. legacy suspend race; * one-liner fix for a ToF bug; * clean-ups in the rx code; * small debugging improvement; * fix WoWLAN with new firmware versions;
-
- 21 Sep, 2015 12 commits
-
-
Eliad Peller authored
In order to verify d0i3 flow, add debug print to indicate d0i3 exit was completed (right after tx was re-enabled), along with the wakeup reasons. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Eliad Peller authored
Recent fw version added assert to make sure wowlan configuration is configured only when a station is connected. Change the driver behavior to pass this configuration only if we indeed have ap station id (i.e. connected). Signed-off-by:
-
Johannes Berg authored
The RX API is currently mixed up into the general fw-api.h file, but we're going to need to extend it significantly in the future, so move it to its own file. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Remove some unused values from the RX API; these were used with older firmware API that didn't have the RX energy API, support for which was removed a long time ago. Signed-off-by:
-
Johannes Berg authored
Since the driver can never configure the data here, this field will always be reported as 0 by the firmware. Even if this was not the case, however, it wouldn't matter since the extra data would be added beyond the end of the phy_info structure we use in the driver, so wouldn't harm anything in this code either. Signed-off-by:
-
Johannes Berg authored
This message is useless - it's in the good case that always happens so enabling it doesn't really help. Just remove it. There are other ways to debug this (e.g. tracing) so there's no need to add a message in the bad case. Signed-off-by:
-
Johannes Berg authored
It's possible for an AP interface to be UP but not actually operating (i.e. not beaconing etc.) - in this case it can't actually do ToF, so check for it. Signed-off-by:
-
Emmanuel Grumbach authored
This flag is set in all supported firmwares. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This flag is set in all supported firmwares. Signed-off-by:
-
Emmanuel Grumbach authored
All the supported firmwares have this flag set. Signed-off-by:
-
Emmanuel Grumbach authored
All the supported firmwares use the new API. Signed-off-by:
-
Emmanuel Grumbach authored
All the supported firwmares support the new API. Signed-off-by:
-
- 18 Sep, 2015 11 commits
-
-
Oleksij Rempel authored
Current kernel support only one fw name with theoretically only one fw version located in “firmware/htc_[9271|7010].fw”. Which is ok so far we have only one fw version (1.3). After we realised new fw 1.4, we faced compatibility problem which was decided to solve by firmware name and location: - new firmware is located now in firmware/ath9k_htc/htc_[9271|7010]-1.4.0.fw - old version 1.3 should be on old place, so old kernel have no issues with it. - new kernels including this patch should be able to try different supported (min..max) fw version. - new kernel should be able to support old fw location too. At least for now. At same time this patch will add new module option which should allow user to play with development fw version without replacing stable one. If user will set “ath9k_htc use_dev_fw=1” module will try to find firmware/ath9k_htc/htc_[9271|7010]-1.dev.0.fw first and if it fails, use stable version: for example...1.4.0.fw. Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
Eric Dumazet authored
Memory placement in sch_dsmark is silly : Better place mask/value in the same cache line. Also, we can embed small arrays in the first cache line and remove a potential cache miss. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: Interrupt coalescing This patch series adds support for interrupt coalescing for GENET adapters. ==================== Signed-off-by: -
Florian Fainelli authored
Add support for the ethtool rx-frames coalescing parameter which allows defining the number of RX interrupts per frames received. The RDMA engine supports a configurable timeout with a resolution of approximately 8.192 us. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Configuring the ethtool tx-frames property, which translates into N packets before a TX interrupt is the simplest configuration scheme because it requires no locking neither at the softare nor hardware level, and is completely indepedent from the link speed. Since ethtool does not allow per-tx queue coalescing parameters, we apply the same setting to any transmit queue. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1, but offers interrupt coalescing when the value is > 1. Since the HW is configured to generate an interrupt when the ring becomes emtpy, we have to deny any timeout/timer settings coming from user-space to indicate we can only generate an interrupt very <N> packets. While we are at it, fix the DMA_INTR_THRESHOLD_MASK value which was off by one bit (0xff vs. 0x1ff). Signed-off-by:
-
Woojung.Huh@microchip.com authored
Remove not defined MAC_CR_GMII_EN_ bit from MAC_CR. Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
Woojung.Huh@microchip.com authored
Create lan78xx_get_mdix_status() and lan78xx_set_mdix_status() for MDIX control. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Remove phy defines in lan78xx.h and use defines in include/linux/microchipphy.h. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Update to use phylib instead of mii_if_info. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Add PHYLIB and MICROCHIP_PHY as default configuration for lan78xx. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Check device ready bit (PMT_CTL_READY_) after reset the PHY. Device may not be ready even if PHY_RST_ is cleared depends on configuration. Signed-off-by:
-
