- 10 Sep, 2018 5 commits
-
-
Peter Wu authored
The drm_get_pci_dev API is deprecated, replace it by drm_dev_register. Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-4-peter@lekensteyn.nlSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Peter Wu authored
Currently unloading bochs_drm (after unbinding the vtconsole) results in a warning about a leaked connector: [drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked! While investigating a potential fix I noticed that a lot of open-coded functionality is already implemented elsewhere, so start converting it: bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl). bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding "struct drm_framebuffer" from "struct bochs_framebuffer". Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c. For this to work, the GEM object is moved into "drm_framebuffer". After that, "bochs_framebuffer" is no longer needed and therefore removed. Remove the unused "size" and "initialized" fields from fb, the latter is not necessary as drm_fb_helper_fbdev_teardown can be called even if bochsfb_create fails. This theory was tested by returning early and late (just before drm_gem_fbdev_fb_create). Both scenarios fail gracefully although the latter seems to leak the object from bochsfb_create_object (not a regression). Guess on the reason for the encoder leak: drm_framebuffer_cleanup was previously used, but did not destroy much. drm_fb_helper_fbdev_teardown is now used and calls drm_framebuffer_remove which does a bit more work. Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm' and also with Xorg + fbdev (startx -> xterm). The latter triggered a warning in ttm_bo_vm_open that existed before, see https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.deAcked-by:Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Peter Wu authored
The "initialized" member is going away. suspend/resume still works (even if bochsfb_create is forced to fail). Signed-off-by:
-
Gerd Hoffmann authored
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb() compat code work correctly on bigendian machines. If they don't they interpret pixel_format values incorrectly for bug compatibility, which in turn implies the ADDFB2 ioctl does not work correctly then. So block it to make userspace fallback to ADDFB. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/virtio/virtgpu_display.c: In function 'virtio_gpu_framebuffer_init': drivers/gpu/drm/virtio/virtgpu_display.c:78:28: warning: variable 'bo' set but not used [-Wunused-but-set-variable] struct virtio_gpu_object *bo; ^ Signed-off-by:YueHaibing <yuehaibing@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/1536285837-150460-1-git-send-email-yuehaibing@huawei.comSigned-off-by:
-
- 09 Sep, 2018 7 commits
-
-
Daniel Vetter authored
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
- drmP.h is now fully split up. - vkms is happening (and will gain its own todo and docs under a new vkms.rst file real soon) - legacy cruft is completely hidden now, drm_vblank.c is split out from drm_irq.c now. I've decided to drop the task to split out drm_legacy.ko, partially because Dave already rejected a patch to hide the old dri1 drivers better. Current state feels good enough to me. - best_encoder atomic cleanup is done (it's now the default, not even exported anymore) - bunch of smaller things v2: - Explain why the drm_legacy.ko task is dropped (Emil). - typos (Sam). v3: Fix typo (Ilia) Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really shouldn't ever be used by drivers directly. Unfortunately this means we need to move the set_writeback_fb function around to avoid a forward decl. Acked-by:
-
Daniel Vetter authored
This is starting to become easy! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Daniel Vetter authored
Just a bit of missing includes and pre declarations. v2: Compiles now, with drm/drm_util.h extracted. v3: Rebase v3: Fix up commit message (Sam Ravnborg) Reviewed-by:
-
Daniel Vetter authored
Only needed minimal changes in drm_internal.h (for the drm_ioctl_t type and a few forward declarations), plus a few missing includes in drm_connector.c. Yay, the last stage of the drm header cleanup can finally commence! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by:
-
Daniel Vetter authored
We have a bunch of neat little macros all over the place which should move to kernel.h. But some of them died in bikesheds on lkml, and we need a decent home for them. Start out by moving the for_each_if macro there. v2: Rename to drm_util.h instead (Dave&Sean) Cc: Sean Paul <seanpaul@chromium.org> Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
- 07 Sep, 2018 5 commits
-
-
Michał Mirosław authored
Copy remove*_conflicting_framebuffers() kerneldocs from fbdev code to make DRM developers' life easier. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
As noticed by kbuild test robot <lkp@intel.com>, remove_conflicting_pci_framebuffers()'s second argument is called res_id not resource_id. Fix this. Signed-off-by:
-
Jonathan Liu authored
The hardware supports dithering on TCON channel 0 which is used for LCD panels. Dithering is a method of approximating a color from a mixture of other colors when the required color isn't available. It reduces color banding artifacts that can be observed when displaying gradients (e.g. grayscale gradients). This may occur when the image that needs to be displayed is 24-bit but the LCD panel is a lower bit depth and does not perform dithering on its own. Signed-off-by:
Jonathan Liu <net147@gmail.com> [wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI] Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
-
Chen-Yu Tsai authored
Dithering is only supported for TCON channel 0. Throughout the datasheet all the names associated with these register are prefixed "TCON0", instead of "TCON". The only exception is the control register "TCON_FRM_CTL_REG". Rename the macros to reflect this. Signed-off-by:
-
Chen-Yu Tsai authored
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device * as its second parameter. This is derived from drm_encoder. The DSI encoder is tied to the CPU interface mode of the TCON as a special case. In theory, if hardware were available, we could also support normal CPU interface modes. It is better to pass the generic encoder instead of the specialized mipi_dsi_device, and handle the differences inside the function. Passing the encoder would also enable the function to pass it, or any other data structures related to it, to other functions expecting it. One such example would be dithering support that will be added in a later patch, which looks at properties tied to the connector to determine whether dithering should be enabled or not. Signed-off-by:
-
- 06 Sep, 2018 9 commits
-
-
Chunming Zhou authored
we can place a fence to a timeline point after expanded. v2: change func parameter order Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Chunming Zhou authored
we can fetch timeline point fence after expanded. v2: The parameter fence is the result of the function and should come last. Signed-off-by:
-
Chunming Zhou authored
moved to front of file. stub fence will be used by timeline syncobj as well. Signed-off-by:
-
Chunming Zhou authored
That is certainly totally nonsense. dma_fence_enable_sw_signaling() is the function who is calling this callback. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
Since this is handling user provided bpp and depth, we need to sanity check and propagate the EINVAL back rather than assume what the insane client intended and fill the logs with DRM_ERROR. v2: Check both bpp and depth match the builtin pixel format, and introduce a canonical DRM_FORMAT_INVALID to reserve 0 against any future fourcc. v3: Mark up DRM_FORMAT_C8 as being {bpp:8, depth:8} Testcase: igt/kms_addfb_basic/legacy-format Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Gerd Hoffmann authored
Userspace on big endian machhines typically expects the ADDFB ioctl returns a big endian framebuffer. drm_mode_addfb() will call drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_* values though, which is wrong. This patch fixes that. Drivers (both kernel and xorg) have quirks in place to deal with the broken drm_mode_addfb() behavior. Because of this we can't just change drm_mode_addfb() behavior for everybody without breaking things. Add the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers can opt-in. Signed-off-by:
-
Gerd Hoffmann authored
framebuffer_check() expects that drm_get_format_info() will not fail if the __drm_format_info() call was successful. That'll work only in case both are called with the same pixel_format value, so masking out the DRM_FORMAT_BIG_ENDIAN flag isn't a good idea. Signed-off-by:
-
Gerd Hoffmann authored
Add fourcc variants in host byte order. With these at hand we don't need #ifdefs in drivers which support framebuffers in cpu endianess. Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
- 05 Sep, 2018 14 commits
-
-
Heiko Stuebner authored
The newly added internal rgb encoder for Rockchip vops is missing stubs for the case that the rgb output part is not enabled in the kernel config. So add these. Fixes: 1f0f0151 (drm/rockchip: Add support for Rockchip Soc RGB output interface) Reviewed-by:
-
Haneen Mohammed authored
crtc_state is accessed by both vblank_handle() and the ordered work_struct handle vkms_crc_work_handle() to retrieve and or update the frame number for computed CRC. Since work_struct can fail, add frame_end to account for missing frame numbers. Use (frame_[start/end]) for synchronization between hrtimer callback and ordered work_struct handle. This patch passes the following subtests from igt kms_pipe_crc_basic test: bad-source, read-crc-pipe-A, read-crc-pipe-A-frame-sequence, nonblocking-crc-pipe-A, nonblocking-crc-pipe-A-frame-sequence Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
Heiko Stuebner authored
The rk3188 has 2 vops not using iommus which only output directly to a rgb interface per vop. So all other output modes like hdmi are provided by external brige chips. Signed-off-by:
Sandy Huang <hjc@rock-chips.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180830110937.1739-1-heiko@sntech.de
-
Sandy Huang authored
Add this feature bit indicate px30 vop can directly output parallel or serial rgb data. Signed-off-by:
-
Sandy Huang authored
Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel and serial RGB data to panel or conversion chip. So add a feature-bit for vops to mark the ability for these direct outputs and add an internal encoder in that case, that can attach to bridge chipsor panels. Changes in v7: 1. forget to delete rockchip_rgb_driver and delete it. Changes in v6: 1. Update according to Heiko Stuebner' implemention, rgb output is part of vop's feature, should not register as a independent driver. Changes in v5: 1. add SPDX-License-Identifier tag Changes in v4: 1. add support px30; Changes in v3: 1. update for rgb-mode move to panel node. Changes in v2: 1. add error log when probe failed; 2. update name_to_output_mode() according to sean's suggest; 3. Fix uninitialized use of ret. Signed-off-by: -
Heiko Stuebner authored
To be able to have both internal subdrivers and external bridge drivers as output endpoints of vops, add a function to be able to distinguish these. changes in v8: - improved function documentation - better error handling - put calls for node and pdev references changes in v6: - added function to check subdriver vs. bridge Signed-off-by:
-
Jernej Skrabec authored
Some boards have HDMI VCC pin connected to voltage regulator which may not be turned on by default. Add support for such boards by adding voltage regulator handling code to HDMI driver. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> [Icenowy: change supply name to "hvcc"] Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Icenowy Zheng authored
Allwiner SoCs with DesignWare HDMI controller all come with a "HVCC" pin, which is the VCC of HDMI part. Add a supply property to specify HVCC's regulator in the device tree. Signed-off-by:
-
Jagan Teki authored
The HDMI controller on Allwinner A64 is similar on the one on H3/H5/A83T (although the PHY is different with A83T). Add A64 compatible and append A83T compatible as fallback. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
-
Jagan Teki authored
Display Engine(DE2) in Allwinner A64 has two mixers and tcons. The routing for mixer0 is through tcon0 and connected to LVDS/RGB/MIPI-DSI controller. The routing for mixer1 is through tcon1 and connected to HDMI. Signed-off-by:
-
Jagan Teki authored
Mixers in Allwinner have similar capabilities as others SoCs with DE2. Add support for them. Signed-off-by:
-
Jagan Teki authored
Allwinner A64 has a DE2 display pipeline. The TCONs are similar to the ones in A83T, but the mixers are new (similar to the later R40 SoC). This patch adds dt-binding documentation for A64 DE2 display pipeline. Signed-off-by:
-
Gustavo A. R. Silva authored
There is a potential execution path in which pointer memfd is NULL when passed as argument to fput(), hence there is a NULL pointer dereference in fput(). Fix this by null checking *memfd* before calling fput(). Addresses-Coverity-ID: 1473174 ("Explicit null dereferenced") Fixes: fbb0de79 ("Add udmabuf misc device") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180904190749.GA9308@embeddedor.comSigned-off-by:
-
Gerd Hoffmann authored
Use the dma mapping api and properly add iommu mappings for objects, unless virtio is in iommu quirk mode. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180829122026.27012-3-kraxel@redhat.com
-
