- 15 Sep, 2016 40 commits
-
-
Jan Kara authored
commit 2e81a4ee upstream. When we need to move xattrs into external xattr block, we call ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end up calling ext4_mark_inode_dirty() again which will recurse back into the inode expansion code leading to deadlocks. Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move its management into ext4_expand_extra_isize_ea() since its manipulation is safe there (due to xattr_sem) from possible races with ext4_xattr_set_handle() which plays with it as well. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 443a8c41 upstream. We did not count with the padding of xattr value when computing desired shift of xattrs in the inode when expanding i_extra_isize. As a result we could create unaligned start of inline xattrs. Account for alignment properly. Signed-off-by:
-
Jan Kara authored
commit 418c12d0 upstream. When multiple xattrs need to be moved out of inode, we did not properly recompute total size of xattr headers in the inode and the new header position. Thus when moving the second and further xattr we asked ext4_xattr_shift_entries() to move too much and from the wrong place, resulting in possible xattr value corruption or general memory corruption. Signed-off-by:
-
Jan Kara authored
commit d0141191 upstream. The code in ext4_expand_extra_isize_ea() treated new_extra_isize argument sometimes as the desired target i_extra_isize and sometimes as the amount by which we need to grow current i_extra_isize. These happen to coincide when i_extra_isize is 0 which used to be the common case and so nobody noticed this until recently when we added i_projid to the inode and so i_extra_isize now needs to grow from 28 to 32 bytes. The result of these bugs was that we sometimes unnecessarily decided to move xattrs out of inode even if there was enough space and we often ended up corrupting in-inode xattrs because arguments to ext4_xattr_shift_entries() were just wrong. This could demonstrate itself as BUG_ON in ext4_xattr_shift_entries() triggering. Fix the problem by introducing new isize_diff variable and use it where appropriate. Reported-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Theodore Ts'o authored
commit 829fa70d upstream. A number of fuzzing failures seem to be caused by allocation bitmaps or other metadata blocks being pointed at the superblock. This can cause kernel BUG or WARNings once the superblock is overwritten, so validate the group descriptor blocks to make sure this doesn't happen. Signed-off-by:
-
Tyler Hicks authored
commit d6e0d306 upstream. The capability check should not be audited since it is only being used to determine the inode permissions. A failed check does not indicate a violation of security policy but, when an LSM is enabled, a denial audit message was being generated. The denial audit message caused confusion for some application authors because root-running Go applications always triggered the denial. To prevent this confusion, the capability check in net_ctl_permissions() is switched to the noaudit variant. BugLink: https://launchpad.net/bugs/1465724Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Tyler Hicks authored
commit 98f368e9 upstream. When checking the current cred for a capability in a specific user namespace, it isn't always desirable to have the LSMs audit the check. This patch adds a noaudit variant of ns_capable() for when those situations arise. The common logic between ns_capable() and the new ns_capable_noaudit() is moved into a single, shared function to keep duplicated code to a minimum and ease maintainability. Signed-off-by:
-
David Howells authored
[ Upstream commit 23c8a812 ] This fixes CVE-2016-0758. In the ASN.1 decoder, when the length field of an ASN.1 value is extracted, it isn't validated against the remaining amount of data before being added to the cursor. With a sufficiently large size indicated, the check: datalen - dp < 2 may then fail due to integer overflow. Fix this by checking the length indicated against the amount of remaining data in both places a definite length is determined. Whilst we're at it, make the following changes: (1) Check the maximum size of extended length does not exceed the capacity of the variable it's being stored in (len) rather than the type that variable is assumed to be (size_t). (2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the integer 0. (3) To reduce confusion, move the initialisation of len outside of: for (len = 0; n > 0; n--) { since it doesn't have anything to do with the loop counter n. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by:
David Woodhouse <David.Woodhouse@intel.com> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
-
Jake Oshins authored
[ Upstream commit e16dad6b ] In existing code, this tree of resources is created in single-threaded code and never modified after it is created, and thus needs no locking. This patch introduces a semaphore for tree access, as other patches in this series introduce run-time modifications of this resource tree which can happen on multiple threads. Signed-off-by:
Jake Oshins <jakeo@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Manoj N. Kumar authored
[ Upstream commit ea765431 ] While profiling the cxlflash_queuecommand() path under a heavy load it was found that number of retries to find cmd_room was fairly high. There are two problems with the current back-off: a) It starts with a udelay of 0 b) It backs-off linearly Tried several approaches (a higher multiple 10*n, 100*n, as well as n^2, 2^n) and found that the exponential back-off(2^n) approach had the least overall cost. Cost as being defined as overall time spent waiting. The fix is to change the linear back-off to an exponential back-off. This solution also takes care of the problem with the initial delay (starts with 1 usec). Signed-off-by:
Manoj N. Kumar <manoj@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit d157bd76 ] Ben Hawkes says: integer overflow in xt_alloc_table_info, which on 32-bit systems can lead to small structure allocation and a copy_from_user based heap corruption. Reported-by:
Ben Hawkes <hawkes@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit b3dae782 ] I missed this when cleaning up the vce pg handling. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Seth Forshee authored
[ Upstream commit 5f65e5ca ] Using INVALID_[UG]ID for the LSM file creation context doesn't make sense, so return an error if the inode passed to set_create_file_as() has an invalid id. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Seth Forshee authored
[ Upstream commit 2d7f9e2a ] Filesystem uids which don't map into a user namespace may result in inode->i_uid being INVALID_UID. A symlink and its parent could have different owners in the filesystem can both get mapped to INVALID_UID, which may result in following a symlink when this would not have otherwise been permitted when protected symlinks are enabled. Signed-off-by:
-
Carol L Soto authored
[ Upstream commit bb6a7773 ] We are seeing this warning: at net/core/skbuff.c:4174 and before commit a44878d1 ("IB/ipoib: Use one linear skb in RX flow") skb truesize was not being set when ipoib was using just one skb. Removing this line avoids the warning when running tcp tests like iperf. Fixes: a44878d1 ("IB/ipoib: Use one linear skb in RX flow") Signed-off-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 197c949e ] Backport of this upstream commit into stable kernels : 89c22d8c ("net: Fix skb csum races when peeking") exposed a bug in udp stack vs MSG_PEEK support, when user provides a buffer smaller than skb payload. In this case, skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); returns -EFAULT. This bug does not happen in upstream kernels since Al Viro did a great job to replace this into : skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg); This variant is safe vs short buffers. For the time being, instead reverting Herbert Xu patch and add back skb->ip_summed invalid changes, simply store the result of udp_lib_checksum_complete() so that we avoid computing the checksum a second time, and avoid the problematic skb_copy_and_csum_datagram_iovec() call. This patch can be applied on recent kernels as it avoids a double checksumming, then backported to stable kernels as a bug fix. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Haren Myneni authored
[ Upstream commit 6333ed8f ] NX842 coprocessor sets 3rd bit in CR register with XER[S0] which is nothing to do with NX request. Since this bit can be set with other valuable return status, mast this bit. One of other bits (INITIATED, BUSY or REJECTED) will be returned for any given NX request. Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
-
Matthew R. Ochs authored
[ Upstream commit d5e26bb1 ] Applications which use virtual LUN's that are backed by a physical LUN over both adapter ports may experience an I/O failure in the event of a link loss (e.g. cable pull). Virtual LUNs may be accessed through one or both ports of the adapter. This access is encoded in the translation entries that comprise the virtual LUN and used by the AFU for load-balancing I/O and handling failover scenarios. In a link loss scenario, even though the AFU is able to maintain connectivity to the LUN, it is up to the application to retry the failed I/O. When applications are unaware of the virtual LUN's underlying topology, they are unable to make a sound decision of when to retry an I/O and therefore are forced to make their reaction to a failed I/O absolute. The result is either a failure to retry I/O or increased latency for scenarios where a retry is pointless. To remedy this scenario, provide feedback back to the application on virtual LUN creation as to which ports the LUN may be accessed. LUN's spanning both ports are candidates for a retry in a presence of an I/O failure. Signed-off-by:
-
Manoj Kumar authored
[ Upstream commit a9be294e ] The original fix to escalate a 'login timed out' error to a LINK_RESET was only made for one of the two ports on the card. This fix resolves the same issue for the second port (port 1). Signed-off-by:
-
Richard Alpe authored
[ Upstream commit 55e77a3e ] Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes of the link name where left out. Making the output of tipc-config -ls look something like: Link statistics: dcast-link 1:data0-1.1.2:data0 1:data0-1.1.3:data0 Also, for the record, the patch that introduce this regression claims "Sending the whole object out can cause a leak". Which isn't very likely as this is a compat layer, where the data we are parsing is generated by us and we know the string to be NULL terminated. But you can of course never be to secure. Fixes: 5d2be142 (tipc: fix an infoleak in tipc_nl_compat_link_dump) Signed-off-by:
Richard Alpe <richard.alpe@ericsson.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 5d2be142 ] link_info.str is a char array of size 60. Memory after the NULL byte is not initialized. Sending the whole object out can cause a leak. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit d157bd76 ] Ben Hawkes says: integer overflow in xt_alloc_table_info, which on 32-bit systems can lead to small structure allocation and a copy_from_user based heap corruption. Reported-by:
-
Tedd Ho-Jeong An authored
[ Upstream commit a0af53b5 ] This patch adds support for Intel Bluetooth device 8265 also known as Windstorm Peak (WsP). T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a2b Rev= 0.10 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 22f35042 ] Apparently some CHV boards failed to hook up the port presence straps for HDMI ports as well (earlier we assumed this problem only affected eDP ports). So let's check the VBT in addition to the strap, and if either one claims that the port is present go ahead and register the relevant connector. While at it, change port D to register DP before HDMI as we do for ports B and C since commit 457c52d8 ("drm/i915: Only ignore eDP ports that are connected") Also print a debug message when we register a HDMI connector to aid in diagnosing missing/incorrect ports. We already had such a print for DP/eDP. v2: Improve the comment in the code a bit, note the port D change in the commit message Cc: Radoslav Duda <radosd@radosd.com> Tested-by:
Radoslav Duda <radosd@radosd.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96321Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464945463-14364-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit 457c52d8 ] If the VBT says that a certain port should be eDP (and hence fused off from HDMI), but in reality it isn't, we need to try and acquire the HDMI connection instead. So only trust the VBT edp setting if we can connect to an eDP device on that port. Fixes: d2182a66 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV) References: https://bugs.freedesktop.org/show_bug.cgi?id=96288Signed-off-by:
Phidias Chiang <phidias.chiang@canonical.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Pavel Rojtberg authored
[ Upstream commit 4efc6939 ] otherwise we lose ff commands: https://github.com/paroj/xpad/issues/27Signed-off-by:
Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Sunil Goutham authored
[ Upstream commit 3f4c68cf ] Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
Tao Wang <tao.wang@cavium.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 1e2ae9ec ] Generation2 instances don't support reporting the NMI status on port 0x61, read from there returns 'ff' and we end up reporting nonsensical PCI error (as there is no PCI bus in these instances) on all NMIs: NMI: PCI system error (SERR) for reason ff on CPU 0. Dazed and confused, but trying to continue Fix the issue by overriding x86_platform.get_nmi_reason. Use 'booted on EFI' flag to detect Gen2 instances. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/1460728232-31433-1-git-send-email-vkuznets@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Leonidas Da Silva Barbosa authored
[ Upstream commit 0d3d054b ] IV size was zero on CBC and CTR modes, causing a bug triggered by skcipher. Fixing this adding a correct size. Signed-off-by:
Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by:
Paulo Smorigo <pfsmorigo@linux.vnet.ibm.com> Signed-off-by:
-
Matthias Schwarzott authored
[ Upstream commit b046d3ad ] Without I get this error for by dvb-card: tda10071: Unknown symbol devm_regmap_init_i2c (err 0) cx23885_dvb_register() dvb_register failed err = -22 cx23885_dev_setup() Failed to register dvb adapters on VID_B Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Anton Blanchard authored
[ Upstream commit 975f57fd ] When calling ppc-xlate.pl, we pass it either linux-ppc64 or linux-ppc64le. The script however was expecting linux64le, a result of its OpenSSL origins. This means we aren't obeying the ppc64le ABIv2 rules. Fix this by checking for linux-ppc64le. Fixes: 5ca55738 ("crypto: vmx - comply with ABIs that specify vrsave as reserved.") Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Paulo Flabiano Smorigo authored
[ Upstream commit 5ca55738 ] It gives significant improvements ( ~+15%) on some modes. These code has been adopted from OpenSSL project in collaboration with the original author (Andy Polyakov <appro@openssl.org>). Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 50220dea ] Plugging a Logitech DJ receiver with KASAN activated raises a bunch of out-of-bound readings. The fields are allocated up to MAX_USAGE, meaning that potentially, we do not have enough fields to fit the incoming values. Add checks and silence KASAN. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
James Smart authored
[ Upstream commit ae09c765 ] Driver didn't program the REG_VFI mailbox correctly, giving the adapter bad addresses. Signed-off-by:
Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit f2101842 ] Driver private request types should not get the artifical cap for the FS requests. This is important to use the full device capabilities for internal command or NVMe pass through commands. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Jeff Lien <Jeff.Lien@hgst.com> Tested-by:
Keith Busch <keith.busch@intel.com> Updated by me to use an explicit check for the one command type that does support extended checking, instead of relying on the ordering of the enum command values - as suggested by Keith. Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ganapatrao Kulkarni authored
[ Upstream commit fbf8f40e ] The erratum fixes the hang of ITS SYNC command by avoiding inter node io and collections/cpu mapping on thunderx dual-socket platform. This fix is only applicable for Cavium's ThunderX dual-socket platform. Reviewed-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit bbf66d89 ] Hyper-V vmbus module registers TSC page clocksource when loaded. This is the clocksource with the highest rating and thus it becomes the watchdog making unloading of the vmbus module impossible. Separate clocksource_select_watchdog() from clocksource_enqueue_watchdog() and use it on clocksource register/rating change/unregister. After all, lobotomized monkeys may need some love too. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Zhao Lei authored
[ Upstream commit 4da2e26a ] btrfs failed in xfstests btrfs/080 with -o nodatacow. Can be reproduced by following script: DEV=/dev/vdg MNT=/mnt/tmp umount $DEV &>/dev/null mkfs.btrfs -f $DEV mount -o nodatacow $DEV $MNT dd if=/dev/zero of=$MNT/test bs=1 count=2048 & btrfs subvolume snapshot -r $MNT $MNT/test_snap & wait -- We can see dd failed on NO_SPACE. Reason: __btrfs_buffered_write should run cow write when no_cow impossible, and current code is designed with above logic. But check_can_nocow() have 2 type of return value(0 and <0) on can_not_no_cow, and current code only continue write on first case, the second case happened in doing subvolume. Fix: Continue write when check_can_nocow() return 0 and <0. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by:
-
Keith Busch authored
[ Upstream commit a59e0f57 ] Go directly to ending a request if it wasn't started. Previously, completing a request may invoke a driver callback for a request it didn't initialize. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn at suse.de> Acked-by:
-
Manoj N. Kumar authored
[ Upstream commit 635f6b08 ] When a cxlflash adapter goes into EEH recovery and multiple processes (each having established its own context) are active, the EEH recovery can hang if the processes attempt to recover in parallel. The symptom logged after a couple of minutes is: INFO: task eehd:48 blocked for more than 120 seconds. Not tainted 4.5.0-491-26f710d+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. eehd 0 48 2 Call Trace: __switch_to+0x2f0/0x410 __schedule+0x300/0x980 schedule+0x48/0xc0 rwsem_down_write_failed+0x294/0x410 down_write+0x88/0xb0 cxlflash_pci_error_detected+0x100/0x1c0 [cxlflash] cxl_vphb_error_detected+0x88/0x110 [cxl] cxl_pci_error_detected+0xb0/0x1d0 [cxl] eeh_report_error+0xbc/0x130 eeh_pe_dev_traverse+0x94/0x160 eeh_handle_normal_event+0x17c/0x450 eeh_handle_event+0x184/0x370 eeh_event_handler+0x1c8/0x1d0 kthread+0x110/0x130 ret_from_kernel_thread+0x5c/0xa4 INFO: task blockio:33215 blocked for more than 120 seconds. Not tainted 4.5.0-491-26f710d+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. blockio 0 33215 33213 Call Trace: 0x1 (unreliable) __switch_to+0x2f0/0x410 __schedule+0x300/0x980 schedule+0x48/0xc0 rwsem_down_read_failed+0x124/0x1d0 down_read+0x68/0x80 cxlflash_ioctl+0x70/0x6f0 [cxlflash] scsi_ioctl+0x3b0/0x4c0 sg_ioctl+0x960/0x1010 do_vfs_ioctl+0xd8/0x8c0 SyS_ioctl+0xd4/0xf0 system_call+0x38/0xb4 INFO: task eehd:48 blocked for more than 120 seconds. The hang is because of a 3 way dead-lock: Process A holds the recovery mutex, and waits for eehd to complete. Process B holds the semaphore and waits for the recovery mutex. eehd waits for semaphore. The fix is to have Process B above release the semaphore before attempting to acquire the recovery mutex. This will allow eehd to proceed to completion. Signed-off-by:
-
