1. 18 Aug, 2019 4 commits
  2. 15 Aug, 2019 8 commits
  3. 14 Aug, 2019 21 commits
  4. 12 Aug, 2019 7 commits
    • Greg Kroah-Hartman's avatar
      Merge tag 'iio-for-5.4a' of... · 6aed51d8
      Greg Kroah-Hartman authored
      Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
      
      Jonathan writes:
      
      First set of new device support, features and cleanups for IIO in the 5.4 cycle
      
      Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
      support for l3c devices.  Done from immutable branch.
      
      A counter subsystem patche in here as well.
      
      Alongside the new device support (which is always good), Chuhong's work
      on using devres managed APIs has cleaned up a number of drivers.
      
      New device support
      * adis16460
        - New driver based on ADIS framework which needed addition of support
          for cs_change_delay. Includes device tree binding.
      * cros_ec
        - Support fo the veyron-minnie which uses an older interface.
      * lsm6dsx
        - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
        - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
      * Maxim 5432
        - New driver support MAX5432-MAX5435 family of potentiometers.
      * noa1305
        - New driver for this ON Semiconductor Ambient light sensor.
      
      Features and cleanups
      * tree wide
        - Drop error prints after platform_get_irq as already prints errors
          internally if any occur.
      * docs
        - Document mounting matrix.
        - Fix a missing newline at end of file.
      * ad2s1210
        - Switch to device managed APIs for all of probe and drop explicit remove.
      * ad7192
        - Add of_device_id array to explicity handling DT bindings.
      * ad7606
        - Lots of rework leading to support for software configure modes in ad7616
          parts.
        - Debugfs register access support.
      * am2315
        - Switch to device managed APIs for all of probe and drop explicit remove.
      * apds9960
        - Typo in module description.
      * cm36651
        - Convert to i2c_new_dummy_device.
        - Swithc to device managed APIs for all of probe adn drop explicit remove.
      * cros_ec
        - Calibscale support for accel, gyro and magnetometer.
        - Tidy up some error codes to return the error from the stack rather than
          -EIO.
        - Determine protocol version.
        - Add a sign vector to the core to fix sensor rotation if necessary.
          Cannot just be done with mount matrix as already in use in many devices.
        - Tidy up INFO_SCALE being in both the separate and shared lists.
        - Drop a lot of dplicate code from the cros-ec-accel-legacy driver
          and use the core provided code instead.
        - Make frequency range available to userspace.
      * counter / ftm-quaddec
        - Switch to device managed APIs for all of probe adn drop explicit remove.
      * hdc100x
        - Switch to device managed APIs for all of probe and drop explicit remove.
      * hi8435
        - Use gpiod_set_value_cansleep as we don't care here and there is a
          board out there where it needs to sleep.
        - Switch to device managed APIs for all of probe and drop explict remove.
      * hp03
        - Convert to i2c_new_dummy_device.
      * maxim thermocouple
        - Switch to device managed APIs for all of probe and drop explicit remove.
      * mmc35240
        - Fix typo in constant naming.
      * mpu6050
        - Use devm_add_action_or_reset in place of explicit error handling.
        - Make text in Kconfig more explicit about which parts are supported.
      * mxc4005
        - Switch to device managed APIs for all of probe and drop explicit remove.
      * pms7003
        - Convert device tree bindings to yaml.
        - Add a MAINTAINERS entry
      * sc27xx
        - Introduce a local struct device *dev pointer to avoid lots of deref.
        - Use devm_add_action_or_reset in place of explicit error handling.
      * sca3000
        - Typo fix in naming.
      * si1145
        - Switch to device managed APIs for all of probe and drop explicit remove.
      * st_sensors
        - Lots of rework to enable switch to regmap.
        - Regmap conversion at the end.
        - Tidy up some inconsistencies in buffer setup ops.
        - Tidy up an oddity by dropping get_irq_data_ready function in favour
          of direct access.
        - Stop allocating buffer in buffer enable in favour of just embedding
          a large enough constant size buffer in the iio_priv accessed structure.
      * st_lsm6dsx
        - l3c device support (LSM6DSO and LSM6DSR)
        - tidy up irq return logic which was strangely written.
        - fix up an ABI quirk where this driver used separate scale
          attributes, even though they were always shared by type.
      * stk33xx
        - Device tree bindings include manufacturer ID.
      * stm32-adc
        - Add control for supply to analog switches including DT bindings.
      * stm32 timer
        - Drop the quadrature mode support.  Believed there were no users so
          take this opportunity to drop this unwanted ABI.
      * tsl2772
        - Switch to device mangage APIs for all of probe and drop explicit remove.
        - Use regulator_bulk_* APIs to reduce repitition.
      * veml6070
        - Convert to i2c_new_dummy_device.
      
      * tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits)
        iio: hi8435: Drop hi8435_remove() by using devres for remaining elements
        iio: hi8435: Use gpiod_set_value_cansleep()
        iio:st_sensors: remove buffer allocation at each buffer enable
        iio: imu: inv_mpu6050: be more explicit on supported chips
        iio: light: noa1305: Add support for NOA1305
        dt-bindings: Add binding document for NOA1305
        iio: remove get_irq_data_ready() function pointer and use IRQ number directly
        iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
        iio: tsl2772: Use regulator_bulk_() APIs
        iio: tsl2772: Use devm_iio_device_register
        iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
        iio: tsl2772: Use devm_add_action_or_reset
        iio: Remove dev_err() usage after platform_get_irq()
        iio: light: si1145: Use device-managed APIs
        iio:pressure: preenable/postenable/predisable fixup for ST press buffer
        iio:magn: preenable/postenable/predisable fixup for ST magn buffer
        iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
        iio:accel: preenable/postenable/predisable fixup for ST accel buffer
        dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
        iio: imu: st_lsm6dsx: add support to ISM330DHCX
        ...
      6aed51d8
    • Stephen Brennan's avatar
      staging: rtl8192u: fix spacing errors · 1aee09b8
      Stephen Brennan authored
      Used checkpatch's --fix-inplace option for types SPACING, OPEN_BRACE,
      ELSE_AFTER_BRACE. Manually edited the resulting changes to correct for
      mistaken fixes and complete fixes that were only partially applied.
      Signed-off-by: default avatarStephen Brennan <stephen@brennan.io>
      Link: https://lore.kernel.org/r/20190811225120.7308-1-stephen@brennan.ioSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1aee09b8
    • Nishka Dasgupta's avatar
      staging: rtl8712: r8712_construct_txaggr_cmd_hdr(): Change return type · 70deda9d
      Nishka Dasgupta authored
      Change return type of r8712_construct_txaggr_cmd_hdr from u8 to void as
      it always returns _SUCCESS and its return value is never used.
      Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
      Link: https://lore.kernel.org/r/20190809052353.5308-8-nishkadg.linux@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      70deda9d
    • Nishka Dasgupta's avatar
      staging: rtl8712: r8712_construct_txaggr_cmd_desc(): Change return type · e7df51e0
      Nishka Dasgupta authored
      Change return type of r8712_construct_txaggr_cmd_desc from u8 to void
      (and remove its return statement) as it always returns _SUCCESS and its
      return value is never stored, checked or otherwise used.
      Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
      Link: https://lore.kernel.org/r/20190809052353.5308-7-nishkadg.linux@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e7df51e0
    • Nishka Dasgupta's avatar
      staging: rtl8712: r8712_xmit_direct(): Change return type · 9958e0e5
      Nishka Dasgupta authored
      Change return type of r8712_xmit_direct from int to void as its return
      value is never used. Remove return statement accordingly.
      Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
      Link: https://lore.kernel.org/r/20190809052353.5308-6-nishkadg.linux@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9958e0e5
    • Nishka Dasgupta's avatar
      staging: rtl8712: r8712_free_xmitbuf(): Change return type · 670b673f
      Nishka Dasgupta authored
      Change return type of r8712_free_xmitbuf from int to void (and remove
      its return values) as its return value is never used.
      Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
      Link: https://lore.kernel.org/r/20190809052353.5308-5-nishkadg.linux@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      670b673f
    • Nishka Dasgupta's avatar
      staging: rtl8712: make_wlanhdr(): Change return values and type · 0d478943
      Nishka Dasgupta authored
      Change return values of make_wlanhdr from _SUCCESS/_FAIL to 0/-EINVAL.
      Modify call site to check for non-zero return values instead of _FAIL.
      Change return type from sint to int.
      Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
      Link: https://lore.kernel.org/r/20190809052353.5308-4-nishkadg.linux@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0d478943