- 10 Oct, 2013 37 commits
-
-
Ben Widawsky authored
For upcoming patches which will have GEN specific MMIO functions, we'll need to initialize the uncore data structure earlier than we do today. If we do not do this, the following will be problematic: intel_uncore_sanitize intel_disable_gt_powersave gen6_disable_rps I915_WRITE(GEN6_RC_CONTROL, 0); <--- MMIO intel_uncore_init // initializes MMIO By initializing the function pointers first, we should be safe. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
At least on my i830M here it reliably results in hard system hangs nowadays. This is much worse than falling back to software rendering, so I think we should simply rip this out. After all we don't have any gpu reset for gen3 either, and there are a lot more of those still around. Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
In truly crazy circumstances shmem might give us the wrong type of page. So be a bit paranoid and double check this. Reviewer: Damien Lespiau <damien.lespiau@intel.com> Cc: Rob Clark <robdclark@gmail.com> References: http://lkml.org/lkml/2011/7/11/238Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
-
Chris Wilson authored
The PIPEA quirk is specifically for the issue with the PIPEB PLL on 830gm being slaved to the PIPEA PLL, and so to use PIPEB requires PIPEA running. i845 doesn't even have the second PLL or pipe, and enabling the quirk results in a blank DVO LVDS. Signed-off-by:
-
Ben Widawsky authored
The policy's max frequency is not equal to the CPU's max frequency. The ring frequency is derived from the CPU frequency, and not the policy frequency. One example of how this may differ through sysfs. If the sysfs max frequency is modified, that will be used for the max ring frequency calculation. (/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq). As far as I know, no current governor uses anything but max as the default, but in theory, they could. Similarly distributions might set policy as part of their init process. It's ideal to use the real frequency because when we're currently scaled up on the GPU. In this case we likely want to race to idle, and using a less than max ring frequency is non-optimal for this situation. AFAIK, this patch should have no impact on a majority of people. This behavior hasn't been changed since it was first introduced: commit 23b2f8bb Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Jun 28 13:04:16 2011 -0700 drm/i915: load a ring frequency scaling table v3 CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ville Syrjälä authored
Flush the primary plane changes when enabling/disabling the primary plane in response to sprite visibility. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
The new names make it clearer which plane we're talking about. Signed-off-by:
-
Ville Syrjälä authored
The intel_flush_primary_plane name actually tells us which plane we're talking about. Also reorganize the internals a bit and add a missing POSTING_READ() to make sure the hardware has seen the changes by the time we return from the function. Signed-off-by:
-
Ville Syrjälä authored
IPS should be OK as long as one plane is enabled on the pipe, but it does seem to cause problems when going between primary only and sprite only. This needs more investigations, but for now just disable IPS whenever the primary plane is disabled. Signed-off-by:
-
Ville Syrjälä authored
Disable fbc before disabling the primary plane, and enable fbc after the primary plane has been enabled again. Also use intel_disable_fbc() to disable FBC to avoid the pointless overhead of intel_update_fbc(), and especially avoid having to clean up and set up the stolen mem compressed buffer again. Signed-off-by:
-
Ville Syrjälä authored
If the setplane operation fails, we shouldn't save the user's requested plane coordinates. Since we adjust the coordinates during the clipping process, make a copy of the originals, and once the operation has succeeded save them for later reuse when the plane gets re-enabled. Signed-off-by:
-
Ville Syrjälä authored
Move the variable initialization to where the variables are declared, and kill a pointless to_intel_crtc() cast when we already have the casted pointer. Signed-off-by:
-
Ville Syrjälä authored
Let's not use goto when a simple if suffices. This is not error handling code or anything, so the goto looks out of place. Signed-off-by:
-
Ville Syrjälä authored
We used to call the entire intel specific update_plane hook while holding struct_mutex. Actually we only need to hold struct_mutex while pinning/unpinning the obj. The plane state itself is protected by the kms locks, and as the object is pinned we can dig out the offset and tiling information from it without fearing that it would change underneath us. So now we don't need to drop and reacquire the lock around the wait_for_vblank. Also we will need another wait_for_vblank in the IVB specific update_plane hook, and this way we don't need to worry about struct_mutex there either. Also move the intel_plane->obj=NULL assignment outside strut_mutex in disable_plane to make it clear that it's not protected by struct_mutex. Signed-off-by:
-
Ville Syrjälä authored
We allow cursors to be set up when the pipe is disabled. Do the same for sprites as well. We need to be somewhat careful with the primary disable logic as we don't want to accidentally enable the primary plane on a disabled pipe. v2: Skip primary enable/disable and plane registers writes on disabled pipe Signed-off-by: -
Ville Syrjälä authored
If the primary gets marked as disabled while the pipe is off for instance, we should still re-enable it when the pipe is turned on, unless the sprite covers it fully also in that configuration. Unfortunately we do the plane visibility checks only in the sprite code, which is executed after the primary enabling when turning the pipe off. Ideally we should compute the plane visibility before touching the hardware at all, but for now just set the primary_disabld flag in intel_{enable,disable}_plane. Signed-off-by: -
Jani Nikula authored
If channel equalization succeeds, there's no indication something went wrong in clock recovery (unless debug is enabled). We should shout about the failures and fix them instead of hiding them under the carpet. This has allowed bugs like [1] stay dormant for a long time. [1] https://bugs.freedesktop.org/show_bug.cgi?id=70117Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The VGACNTRL register contains a bunch of other stuff besides the VGA_DISP_DISABLE bit. When we write the register we always set those other bits to zero, so normally the current check would work. However on HSW disabling and re-enabling the power well will reset the VGACNTRL register to its default value, which has several of the other bits set as well. So only look at the VGA_DISP_DISABLE bit when checking whether the VGA plane needs re-disabling. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ville Syrjälä authored
Everyone else uses intel_PLL_is_valid(), so make VLV use it as well. We don't have any special p and m limits on VLV, so skip those tests, and we also need to skip the m1<=m2 test line PNV. Reorganize the function a bit to move the n check alongside the rest of the test for the non-derived dividers, and check the derived values afterwards. Note that this changes vlv_find_best_dpll() in two ways: - The .vco comparison is now >max instead of >=max, and since we round down when calculating that stuff, we may now allow frequencies slightly above the max as we do on other platforms. The previous method disallowed exactly max and anything above it. - We now check the .dot frequency against the data rate limits, which we didn't do before. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Ville Syrjälä authored
If vlv_find_best_dpll() couldn't find suitable PLL settings, just say so instead of lying to caller. Signed-off-by:
-
Ville Syrjälä authored
After aligning the p1 divider limits, and removing the unused p and m limits, intel_limits_vlv_dac and intel_limits_vlv_hdmi are identical. Signed-off-by:
-
Ville Syrjälä authored
We don't use .dot_limit for anything on VLV, so don't populate it. Signed-off-by:
-
Ville Syrjälä authored
We never check the p and m limits (which according to comments are based on someone's guesswork), so just remove them. VLV2_DPLL_mphy_hsdpll_frequency_table_ww6_rev1p1.xlsm has no p and m limits listed. Signed-off-by:
-
Ville Syrjälä authored
VLV2_DPLL_mphy_hsdpll_frequency_table_ww6_rev1p1.xlsm tells us that the minimum p2 divider is 2. Use that limit on the code. Signed-off-by:
-
Ville Syrjälä authored
According to VLV2_DPLL_mphy_hsdpll_frequency_table_ww6_rev1p1.xlsm p1 can be 2-3 always. Signed-off-by:
-
Ville Syrjälä authored
For some reason there's a sort of off by one issue with the p1 divider. The actual p1 limits according to VLV2_DPLL_mphy_hsdpll_frequency_table_ww6_rev1p1.xlsm is 2-3, so we should just say that instead of saying 1-3 and avoiding the 1 via the choice of comparison operator. I don't know why we're using different p1 limits for intel_limits_vlv_dac and intel_limits_vlv_hdmi, but let's preserve that for now. Signed-off-by:
-
Ville Syrjälä authored
We limit the maximum n divider value in order to make sure the PLL's reference inout is at least 19.2 MHz. I assume that is done to satisfy some hardware requirement. However we never check whether that calculated limit is below the maximum supoorted N divider value (7). In practice that is always true since we only support 100 MHz reference clock, but making the code safe against higher reference clocks seems like a reasoanble thing to do. Signed-off-by:
-
Ville Syrjälä authored
The p2 divider on VLV needs to be even when it's > 10. The current code to make that happen is rather weird. Just make the step size adjustement in the for loop decrement step. Signed-off-by:
-
Ville Syrjälä authored
Rewrite vlv_find_best_dpll() to use intel_clock_t rather than an army of local variables. Also extract the code to calculate the derived values into vlv_clock(). v2: Split up the earlier fixes, extract vlv_clock() v3: Initialize best_clock Signed-off-by:
-
Ville Syrjälä authored
We do 'bestppm - 10' in vlv_find_best_dpll() but never check whether that might underflow. Add such a check. Signed-off-by:
-
Ville Syrjälä authored
Use div_u64() to make the ppm calculation in vlv_find_best_dpll() safe against interger overflows. Signed-off-by:
-
Jani Nikula authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Chris Wilson authored
The interface uses an unsigned long, and we can use the unsigned counter throughout our code, so do so. In the process, we notice one instance where the shrink count is based on a heuristic rather than the result, and another where we ask for too many pages to be purged. v2: nr_to_scan needs to be promoted to a long as well, so just use sc->nr_to_scan directly. Signed-off-by: -
Chris Wilson authored
Since we are waiting upon IO completion, inform the kernel through use of the io_schedule() call rather than the regular schedule(). This should allow the kernel to make better decisions regarding scheduling and power management. Signed-off-by:
-
Daniel Vetter authored
The conflict in intel_drv.h tripped me up a bit since a patch in dinq moves all the functions around, but another one in drm-next removes a single function. So I'ev figured backing this into a backmerge would be good. i915_dma.c is just adjacent lines changed, nothing nefarious there. Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/intel_drv.h Signed-off-by:
-
- 09 Oct, 2013 3 commits
-
-
Jani Nikula authored
It's not really needed, rather just adds another place to hold intermediate values that could go wrong, and it's not clear that the training pattern set or training lane set should be written at this point at all. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jani Nikula authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jani Nikula authored
Signed-off-by:
-
