- 24 Jul, 2020 5 commits
-
-
Ben Chuang authored
Set SDR104's clock to 205MHz and enable SSC for GL9750 and GL9755 Signed-off-by:
Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20200717033350.13006-1-benchuanggli@gmail.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Ben Chuang authored
The format string of the task descriptor should be "%016llx". Signed-off-by:
Ben Chuang <benchuanggli@gmail.com> Link: https://lore.kernel.org/r/20200715073344.8965-1-benchuanggli@gmail.comSigned-off-by:
-
Manish Narani authored
The initial code that was adding delays was doing a cast over undefined memory. This meant that the delays would be all gibberish. This change, allocates all delays on the stack, and assigns them from the ZynqMP & Versal macros/phase-list. And then finally copies them over the common iclk_phase & oclk_phase variables. Signed-off-by:
Manish Narani <manish.narani@xilinx.com> Link: https://lore.kernel.org/r/1594753953-62980-1-git-send-email-manish.narani@xilinx.comSigned-off-by:
-
Dan Carpenter authored
Smatch complains that "ret" can be used without being initialized. drivers/mmc/host/sdhci.c 4383 if (!IS_ERR(mmc->supply.vqmmc)) { 4384 if (enable_vqmmc) { ^^^^^^^^^^^^ 4385 ret = regulator_enable(mmc->supply.vqmmc); ^^^^^ 4386 host->sdhci_core_to_disable_vqmmc = !ret; 4387 } "ret" is only initialized when "enable_vqmmc" is true. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200714141410.GB314989@mwandaSigned-off-by:
-
Yoshihiro Shimoda authored
Convert Renesas SDHI SD/MMC controller document to YAML. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1594363883-22154-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
- 18 Jul, 2020 1 commit
-
-
Wan Ahmad Zainie authored
Convert arasan,sdhci.txt file to yaml. The new file arasan,sdhci.yaml will inherit properties from mmc-controller.yaml. 'sdhci' is no longer a valid name for node and should be changed to 'mmc'. Suggested-by:
Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by:
-
- 13 Jul, 2020 34 commits
-
-
Ulf Hansson authored
-
Veerabhadrarao Badiganti authored
Don't access vqmmc regulator handler, if it's already invalidated. Reported-by:
Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1594300408-17658-1-git-send-email-vbadigan@codeaurora.orgSigned-off-by:
-
Yoshihiro Shimoda authored
The commit 5a36d6bc ("mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which is possible to perform a full power cycle of the card at any time. However, some environment (like r8a77951-salvator-xs) is possible to perform a full power cycle of the card in suspend via firmware (PSCI on arm-trusted-firmware). So, in worst case, since we are not doing a graceful shutdown of the eMMC device (just cut VCCQ while the eMMC is "sleeping") in suspend, it could lead to internal data corruptions. So, add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND to do a graceful shutdown which issues Power Off notification before entering system suspend. Signed-off-by:
-
Yoshihiro Shimoda authored
The commit 5a36d6bc ("mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which is possible to perform a full power cycle of the card at any time. However, some environment (like r8a77951-salvator-xs) is possible to perform a full power cycle of the card in suspend via firmware (PSCI on arm-trusted-firmware). So, add a new property for such environment. Signed-off-by:
-
Veerabhadrarao Badiganti authored
Configure SDHC IO pins with low power configuration when the driver is in suspend state. Signed-off-by:
-
Lee Jones authored
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, 'struct sdhci_iproc_acpi_ids' becomes defined but unused. Fixes the following W=1 kernel build warning: mmc/host/sdhci-iproc.c:297:36: warning: ‘sdhci_iproc_acpi_ids’ defined but not used [-Wunused-const-variable=] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20200707064701.GC3500@dellSigned-off-by:
-
Colin Ian King authored
The variable 'found' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200706163031.503431-1-colin.king@canonical.comSigned-off-by:
-
Lee Jones authored
When building the kernel with W=1 the build system complains of: drivers/mmc/host/omap.c:854:6: warning: no previous prototype for ‘omap_mmc_notify_cover_event’ [-Wmissing-prototypes] 854 | void omap_mmc_notify_cover_event(struct device *dev, int num, int is_closed) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ If we move the prototype into a shared headerfile the build system will be satisfied. Rather than create a whole new headerfile just for this purpose, it makes sense to use the already existing mmc-omap.h. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200701102317.235032-1-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
cqhci_host_alloc_tdl()'s function header is the only one in kerneldoc format. Which seems odd as it's not part of an external API and isn't referenced anywhere else. Seeing as there has also been no attempt to describe the expected function arguments either, we're going to assume that this is not actually a bona fide kerneldoc use-case. Fixes the following W=1 kernel build warning: drivers/mmc/host/cqhci.c:163: warning: Function parameter or member 'cq_host' not described in 'cqhci_host_alloc_tdl' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ritesh Harjani <riteshh@codeaurora.org> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200701124702.908713-15-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
__sdhci_msm_set_clock()'s function header is the only one in kerneldoc format. Which seems odd as it's not part of an external API and isn't referenced anywhere else. Seeing as there has also been no attempt to describe the expected function arguments either, we're going to assume that this is not actually a bona fide kerneldoc use-case. Fixes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'host' not described in '__sdhci_msm_set_clock' drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'clock' not described in '__sdhci_msm_set_clock' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Kerneldoc expects arg descriptions to be in the format '@.*: '. If either the '@' or the ':' is omitted then kerneldoc complains that the description is missing. Add the missing ':' here and provide a new description for 'value'. Fixes the following kernel build W=1 warnings: drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'host' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'value' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-msm.c:1887:6: warning: no previous prototype for ‘sdhci_msm_dump_vendor_regs’ [-Wmissing-prototypes] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Xiaobo Xie <X.Xie@freescale.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Lee Jones authored
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_usb_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_usb_sdmmc.c:657:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 657 | int err, i; | ^~~ Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by:
-
Lee Jones authored
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_pci_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_pci_sdmmc.c:678:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 678 | int err, i; | ^~~ Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by:
-
Lee Jones authored
Provide missing documentation for dw_mci_exynos_suspend_noirq() and dw_mci_exynos_resume_noirq() function headers. Fixes the following W=1 kernel build warnings: drivers/mmc/host/dw_mmc-exynos.c:184: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_suspend_noirq' drivers/mmc/host/dw_mmc-exynos.c:200: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_resume_noirq' Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-9-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
Correcting this misspelling squashes the following W=1 build warning(s): mmc/core/queue.c:212: warning: Function parameter or member 'mq' not described in '__mmc_init_request' mmc/core/queue.c:212: warning: Excess function parameter 'q' description in '__mmc_init_request' Signed-off-by:
-
Lee Jones authored
'sg_len' and 'dma_conf' are missing correct kerneldoc documentation and 'buf_phys_addr' was misspelled. Correcting these issues fixes the following W=1 kernel build issues: mmc/host/atmel-mci.c:352: warning: Function parameter or member 'sg_len' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'buf_phys_addr' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'dma_conf' not described in 'atmel_mci' Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Lee Jones authored
No other function in the file is documented using kerneldoc and no effort to document the function arguments have been made. It's a bit of an oddity to say the least. Let's downgrade it from kerneldoc to a standard comment block instead. Fixes the following W=1 kernel build warning: drivers/mmc/host/mtk-sd.c:1030: warning: Function parameter or member 'host' not described in 'msdc_recheck_sdio_irq' Cc: Chaotian Jing <chaotian.jing@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200701124702.908713-6-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
Describe properties; ext_cd_irq, clk_rates and no_divider (x2). Squashes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'ext_cd_irq' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'clk_rates' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:139: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c_drv_data' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
Lee Jones authored
Remainder of the kerneldoc descriptions look present and correct. Fixes the following W=1 kernel build warnings: drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'mmc' not described in 'mmc_regulator_set_vqmmc' drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'ios' not described in 'mmc_regulator_set_vqmmc' Signed-off-by:
-
Lee Jones authored
Add missing kerneldoc entry for sdio_set_host_pm_flags()'s 'flag' function argument. Fixes the following W=1 kernel build warning: kernel/drivers/mmc/core/sdio_io.c:722: warning: Function parameter or member 'flags' not described in 'sdio_set_host_pm_flags' Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Lee Jones authored
Not all source files which include quirks.h make use of the all of the available fixup information. When this happens the compiler complains that some constant variables are defined by never used. We can fix this by telling the compiler that this intentional by simply marking them as __maybe_unused. Fixes the following W=1 kernel build warnings: In file included from drivers/mmc/core/sdio.c:22: drivers/mmc/core/quirks.h:105:31: warning: ‘mmc_ext_csd_fixups’ defined but not used [-Wunused-const-variable=] 105 | static const struct mmc_fixup mmc_ext_csd_fixups[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ In file included from drivers/mmc/core/mmc.c:25: drivers/mmc/core/quirks.h:123:31: warning: ‘sdio_fixup_methods’ defined but not used [-Wunused-const-variable=] 123 | static const struct mmc_fixup sdio_fixup_methods[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ Cc: Andrei Warkentin <andreiw@motorola.com> Cc: Martin Mares <mj@ucw.cz> Signed-off-by: -
Hulk Robot authored
Fix sparse build warning: drivers/mmc/host/sdhci-msm.c:1888:6: warning: symbol 'sdhci_msm_dump_vendor_regs' was not declared. Should it be static? Signed-off-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
-
Yoshihiro Shimoda authored
If this controller doesn't issue interrupt for response of command, this driver lacks to call dma_unmap_sg(). So, fix the issue by using end() of struct tmio_mmc_dma_ops. Reported-by:
Takeshi Saito <takeshi.saito.xv@renesas.com> Fixes: 2a68ea78 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Yoshihiro Shimoda authored
To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by:
-
Yoshihiro Shimoda authored
Related drivers like renesas_sdhi_internal_dmac are possible to lack dma unmaping in error cases (for example response timeout). Since tmio_mmc_finish_request() will be always called in any case, to fix the issue, add end operation into struct tmio_mmc_dma_ops and call the operation in tmio_mmc_finish_request() to call dma_ummap API by the related drivers correctly. Signed-off-by:
-
Pali Rohár authored
Define appropriate macro names for consistency with other macros. Signed-off-by:
Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.orgSigned-off-by:
-
Veerabhadrarao Badiganti authored
On qcom SD host controllers voltage switching be done after the HW is ready for it. The HW informs its readiness through power irq. The voltage switching should happen only then. Use the internal voltage switching and then control the voltage switching using power irq. IO-bus supply of eMMC would be kept always-on. So set the load for this supply to configure it in LPM when eMMC is suspend state and in HPM when eMMC is active. Co-developed-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by:
-
Veerabhadrarao Badiganti authored
Set the default power mode, MMC_POWER_UNDEFINED, in mmc_alloc_host() rather than in mmc_start_host(). This enables host drivers to make use of the initial state during ->probe(). Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-3-git-send-email-vbadigan@codeaurora.orgSigned-off-by:
-
Vijay Viswanath authored
If vendor platform drivers are controlling whole logic of voltage switching, then sdhci driver no need control vqmmc regulator. So skip enabling/disable vqmmc from SDHC driver. Signed-off-by:
-
Akshu Agrawal authored
HS400/HS200/eMMC HS doesn't have Preset Value register. Hence, sdhci_set_ios function overrides the value set by fmw to SDHCI_CTRL_DRV_TYPE_B. This patch sets drv_type to MMC_SET_DRIVER_TYPE_A so that host_control2 register gets updated with the required strength value. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Acked-by:
-
Haibo Chen authored
USDHC of i.MX has internal IC debug register, which record the IC logical status. So dump these logical status in error condition, this can help analyzing issue. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
-
Haibo Chen authored
In current code logic, when work in SDR12/SDR25 mode, the final clock rate is incorrect, just the legancy 400KHz, because the card->sw_caps.sd3_bus_mode do not has the flag SD_MODE_UHS_SDR12 or SD_MODE_UHS_SDR25. Besides, SDIO_SPEED_SDR12 is actually value 0, and every mode need to config the timing and clock rate, so remove the ‘if’ operator. Signed-off-by:
-
Faiz Abbas authored
Add support for writing new clkbuf_sel property for the J721e 4 bit IP. Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-7-faiz_abbas@ti.comSigned-off-by:
-
Faiz Abbas authored
For speed modes where DLL is not enabled write to TXDLYCLK to enable transmitter delay chain mode. Signed-off-by:
-
