Merge tag 'clk-hisi' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into clk-next-hisilcon

updating clock drivers for Hisilicon

This should read MOD0 and not MMC; MMC is just one example of a MOD0
clock.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Some divisor calculations were misrounded, causing higher than requested
rates on some clocks. Fix them up using DIV_ROUND_UP, and replace one
homebrew instance of it as well with the right macro.
Reported-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Allwinner actually reworked the PLL4 on A20; now it's compatible with
the sun4i PLL5/6 design previous to any divisions, as well as to the new
PLL8 in sun7i.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Allwinner sunXi SoCs clock changes

This adds support for the new, more correct clock node naming and gets
the A10 compatibles in line with the rest of the other SoCs. It also
adds support for the USB, GMAC and A31's PLL6 clocks. Some of these
changes also require DT modifications that will be merged via arm-soc.

Remove the static variable. So these common clock register helper could
be used in more SoCs.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Now only fixed rate clocks are appended into the clock driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

The fixed rate and fixed factor clock isn't registered to clk table.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in
reference from the variable socfpga_child_clocks to the function
.init.text:socfpga_pll_init()
The variable socfpga_child_clocks references
the function __init socfpga_pll_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in
reference from the variable socfpga_child_clocks to the function
.init.text:socfpga_periph_init()
The variable socfpga_child_clocks references
the function __init socfpga_periph_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in
reference from the variable socfpga_child_clocks to the function
.init.text:socfpga_gate_init()
The variable socfpga_child_clocks references
the function __init socfpga_gate_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Reported-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

clock: mvebu new SoC changes for v3.15 (incremental pull #2)

 - mvebu (Armada 375)
    - fix ratio register offest

 - mvebu (Armada 380)
    - expand core divider clock driver to support 380 SoC (enables nand support)

Since clock operation within S2MPS11 and S5M8767 are similar, we can
support both the devices within a single driver.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

The clocks in S2MPS11 and S5M8767 are managed in the same way, baring
a difference in the register offset. It would be better to update
existing S2MPS11 driver to support the clocks in S5M8767, rather than
creating an almost duplicate driver altogether.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

MOXA ART SoCs allow to determine PLL output and APB frequencies
by reading registers holding multiplier and divisor information.

Add a clock driver for this SoC.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

The Core Divider clock support two new compatible strings for Armada
375 and Armada 380 SoCs. Add the compatible strings to the documentation.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-7-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

This commit adds support for the Core Divider clocks of the Armada
380 SoCs. Similarly to Armada 370 and XP, the Core Divider clocks of
the 380 have gate capabilities. The only difference is the register layout.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-2-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

This commit fixes the ratio register offset which is 0x4,
as per the Armada 375 SoC specification.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394638901-13368-2-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

ti/clk-divider.c does not calculate the rates consistently at the moment.

As an example, on OMAP3 we have a clock divider with a source clock of
864000000 Hz. With dividers 6, 7 and 8 the theoretical rates are:

6: 144000000
7: 123428571.428571...
8: 108000000

Calling clk_round_rate() with the rate in the first column will give the
rate in the second column:

144000000 -> 144000000
143999999 -> 123428571
123428572 -> 123428571
123428571 -> 108000000

Note how clk_round_rate() returns 123428571 for rates from 123428572 to
143999999, which is mathematically correct, but when clk_round_rate() is
called with 123428571, the returned value is surprisingly 108000000.

This means that the following code works a bit oddly:

rate = clk_round_rate(clk, 123428572);
clk_set_rate(clk, rate);

As clk_set_rate() also does clock rate rounding, the result is that the
clock is set to the rate of 108000000, not 123428571 returned by the
clk_round_rate.

This patch changes the ti/clk-divider.c to use DIV_ROUND_UP when
calculating the rate. This gives the following behavior which fixes the
inconsistency:

144000000 -> 144000000
143999999 -> 123428572
123428572 -> 123428572
123428571 -> 108000000
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

clk-divider.c does not calculate the rates consistently at the moment.

As an example, on OMAP3 we have a clock divider with a source clock of
864000000 Hz. With dividers 6, 7 and 8 the theoretical rates are:

6: 144000000
7: 123428571.428571...
8: 108000000

Calling clk_round_rate() with the rate in the first column will give the
rate in the second column:

144000000 -> 144000000
143999999 -> 123428571
123428572 -> 123428571
123428571 -> 108000000

Note how clk_round_rate() returns 123428571 for rates from 123428572 to
143999999, which is mathematically correct, but when clk_round_rate() is
called with 123428571, the returned value is surprisingly 108000000.

This means that the following code works a bit oddly:

rate = clk_round_rate(clk, 123428572);
clk_set_rate(clk, rate);

As clk_set_rate() also does clock rate rounding, the result is that the
clock is set to the rate of 108000000, not 123428571 returned by the
clk_round_rate.

This patch changes the clk-divider.c to use DIV_ROUND_UP when
calculating the rate. This gives the following behavior which fixes the
inconsistency:

144000000 -> 144000000
143999999 -> 123428572
123428572 -> 123428572
123428571 -> 108000000
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

cppcheck detected following error
[clk-master.c:245]: (error) Memory leak: characteristics

The original code forgot to free characteristics when
irq_of_parse_and_map() failed.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

This patch adds support for the new v2 version of the axi-clkgen core.
Unfortunately the method of accessing the registers is quite different on v2,
while the content still stays largely the same. So the patch adds a small
abstraction layer which implements the specific read and write functions for v1
and v2 in callback functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

Suggest by Arnd: abstract mmc tuning as clock behavior,
also because different soc have different tuning method and registers.
hi3620_mmc_clks is added to handle mmc clock specifically on hi3620.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

The PLLs can be from 3 different sources: osc1, osc2, or the f2s_ref_clk.
Update the clock driver to be able to get the correct parent.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Use 64-bit integer for calculating clock rate. Also use do_div for the
64-bit division.
Signed-off-by: Graham Moore <grmoore@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

The Nomadik debugfs screws up multiplatform boots if debugfs
is enabled on the multiplatform image, since it's a simple
initcall that is unconditionally executed and reads from certain
memory locations.

Fix this by checking that the driver has been properly
initialized, so a base offset to the Nomadik SRC controller
exists, before proceeding to register debugfs files.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Do not use readl/writel directly because the whole
clk subsystem is using clk_readl/clk_writel functions.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

These variable clocks have nothing to do with MSTP gating, probably a
copy&paste leftover.
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

cpu0 clock node has no functionality, since cpufreq-cpu0 is already
capable of picking up the clock from dts.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Ensure clk->kref is dereferenced only when clk is not NULL.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

At probe time, a clock device may not be ready when some other device
wants to use it.

This patch lets the functions clk_get/devm_clk_get return a probe defer
when the clock is defined in the DT but not yet available.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Both the pr_err and the additional kerneldoc aim to help when debugging
errors thrown from within a clock rate-change notifier callback.
Reported-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Merge branch 'clk-tegra-more-fixes-3.14' of git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-fixes

Fixes stray access to undefined registers, use of wrong clock parents &
running clocks at wrong rates. All of these issues cause regressions in
the form of boards that are unable to boot or crash and die horrible
deaths.

The DT bindings document a renesas,indices property, while the code, the
DT example and the DT sources all use renesas,clock-indices. Fix the
documentation.

The shmobile mstp DT bindings have been merged in v3.14-rc1 with a bug
in the DT ABI, a fix during the -rc series is appropriate.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>

The qspi clock divisor is incorrectly set to twice the value it should
have, possibly because it has been computed based on PLL1 as the clock
parent instead of PLL1 / 2 (the datasheets specifies the qspi nominal
frequencies, not the divisor values). Fix it.

This bug introduced in v3.14-rc1 breaks various devices on the Lager and
Kolesh shmobile boards and should thus be considered as a regression for
which a fix during the -rc series is appropriate.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

The lb, qspi, sdh, sd0 and sd1 clocks have the PLL1 (divided by 2) as
their parent, not the main clock. Fix it.

This bug introduced in v3.14-rc1 breaks various devices on the Lager and
Kolesh shmobile boards and should thus be considered as a regression for
which a fix during the -rc series is appropriate.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes for ARM platforms.  Most are fixes for DTS
  files, mostly from DT conversion on OMAP which is still finding a few
  issues here and there.

  There's a couple of small stale code removal patches that we usually
  queue for the next release instead, but they seemed harmless enough to
  bring in now.

  Also, a fix for backlight on some PXA platforms, and a cache
  configuration fix for Tegra, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
  ARM: tegra: only run PL310 init on systems with one
  ARM: tegra: Add head numbers to display controllers
  ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
  ARM: tegra: fix RTC0 alias for Cardhu
  ARM: dove: dt: revert PMU interrupt controller node
  Documentation: dt: OMAP: Update Overo/Tobi
  ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  ARM: dts: omap3-tobi: Use the correct vendor prefix
  ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  ARM: OMAP2+: Remove legacy macros for zoom platforms
  ARM: OMAP2+: Remove MACH_NOKIA_N800
  ARM: dts: N900: add missing compatible property
  ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  ARM: OMAP1: nokia770: enable tahvo-usb
  ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
  ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
  ARM: dts: omap3-gta04: Fix mmc1 properties.
  ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
  ARM: OMAP2+: add missing ARCH_HAS_OPP
  ...

Pull regulator fixes from Mark Brown:
 "Mostly unexciting driver fixes, plus one fix to lower the severity of
  the log message when we don't use an optional regulator - the fixes
  for ACPI system made this come up more often and it was correctly
  observed that it was causing undue concern for users"

* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max14577: Fix invalid return value on DT parse success
  regulator: core: Change dummy supplies error message to a warning
  regulator: s5m8767: Add missing of_node_put
  regulator: s5m8767: Use of_get_child_by_name
  regulator: da9063: Bug fix when setting max voltage on LDOs 5-11