1. 01 Apr, 2018 40 commits
    • Eric Dumazet's avatar
      inet: frags: change inet_frags_init_net() return value · 787bea77
      Eric Dumazet authored
      We will soon initialize one rhashtable per struct netns_frags
      in inet_frags_init_net().
      
      This patch changes the return value to eventually propagate an
      error.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      787bea77
    • Eric Dumazet's avatar
      ipv6: frag: remove unused field · c22af22c
      Eric Dumazet authored
      csum field in struct frag_queue is not used, remove it.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c22af22c
    • David S. Miller's avatar
      Merge branch 'bnxt_en-next' · 5749d6af
      David S. Miller authored
      Michael Chan says:
      
      ====================
      bnxt_en: Update for net-next.
      
      Misc. updates including updated firmware interface, some additional
      port statistics, a new IRQ assignment scheme for the RDMA driver, support
      for VF trust, and other changes and improvements for SRIOV.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5749d6af
    • Michael Chan's avatar
      bnxt_en: Add ULP calls to stop and restart IRQs. · ec86f14e
      Michael Chan authored
      When the driver needs to re-initailize the IRQ vectors, we make the
      new ulp_irq_stop() call to tell the RDMA driver to disable and free
      the IRQ vectors.  After IRQ vectors have been re-initailized, we
      make the ulp_irq_restart() call to tell the RDMA driver that
      IRQs can be restarted.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec86f14e
    • Michael Chan's avatar
      bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver. · fbcfc8e4
      Michael Chan authored
      Add additional logic to reserve completion rings for the bnxt_re driver
      when it requests MSIX vectors.  The function bnxt_cp_rings_in_use()
      will return the total number of completion rings used by both drivers
      that need to be reserved.  If the network interface in up, we will
      close and open the NIC to reserve the new set of completion rings and
      re-initialize the vectors.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fbcfc8e4
    • Michael Chan's avatar
      bnxt_en: Refactor bnxt_need_reserve_rings(). · 4e41dc5d
      Michael Chan authored
      Refactor bnxt_need_reserve_rings() slightly so that __bnxt_reserve_rings()
      can call it and remove some duplicated code.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e41dc5d
    • Michael Chan's avatar
      bnxt_en: Add IRQ remapping logic. · e5811b8c
      Michael Chan authored
      Add remapping logic so that bnxt_en can use any arbitrary MSIX vectors.
      This will allow the driver to reserve one range of MSIX vectors to be
      used by both bnxt_en and bnxt_re.  bnxt_en can now skip over the MSIX
      vectors used by bnxt_re.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5811b8c
    • Michael Chan's avatar
      bnxt_en: Change IRQ assignment for RDMA driver. · 08654eb2
      Michael Chan authored
      In the current code, the range of MSIX vectors allocated for the RDMA
      driver is disjoint from the network driver.  This creates a problem
      for the new firmware ring reservation scheme.  The new scheme requires
      the reserved completion rings/MSIX vectors to be in a contiguous
      range.
      
      Change the logic to allocate RDMA MSIX vectors to be contiguous with
      the vectors used by bnxt_en on new firmware using the new scheme.
      The new function bnxt_get_num_msix() calculates the exact number of
      vectors needed by both drivers.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      08654eb2
    • Michael Chan's avatar
      bnxt_en: Improve ring allocation logic. · 9899bb59
      Michael Chan authored
      Currently, the driver code makes some assumptions about the group index
      and the map index of rings.  This makes the code more difficult to
      understand and less flexible.
      
      Improve it by adding the grp_idx and map_idx fields explicitly to the
      bnxt_ring_struct as a union.  The grp_idx is initialized for each tx ring
      and rx agg ring during init. time.  We do the same for the map_idx for
      each cmpl ring.
      
      The grp_idx ties the tx ring to the ring group.  The map_idx is the
      doorbell index of the ring.  With this new infrastructure, we can change
      the ring index mapping scheme easily in the future.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9899bb59
    • Michael Chan's avatar
      bnxt_en: Improve valid bit checking in firmware response message. · 845adfe4
      Michael Chan authored
      When firmware sends a DMA response to the driver, the last byte of the
      message will be set to 1 to indicate that the whole response is valid.
      The driver waits for the message to be valid before reading the message.
      
      The firmware spec allows these response messages to increase in
      length by adding new fields to the end of these messages.  The
      older spec's valid location may become a new field in a newer
      spec.  To guarantee compatibility, the driver should zero the valid
      byte before interpreting the entire message so that any new fields not
      implemented by the older spec will be read as zero.
      
      For messages that are forwarded to VFs, we need to set the length
      and re-instate the valid bit so the VF will see the valid response.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      845adfe4
    • Michael Chan's avatar
      bnxt_en: Improve resource accounting for SRIOV. · 596f9d55
      Michael Chan authored
      When VFs are created, the current code subtracts the maximum VF
      resources from the PF's pool.  This under-estimates the resources
      remaining in the PF pool.  Instead, we should subtract the minimum
      VF resources.  The VF minimum resources are guaranteed to the VFs
      and only these should be subtracted from the PF's pool.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      596f9d55
    • Michael Chan's avatar
      bnxt_en: Check max_tx_scheduler_inputs value from firmware. · db4723b3
      Michael Chan authored
      When checking for the maximum pre-set TX channels for ethtool -l, we
      need to check the current max_tx_scheduler_inputs parameter from firmware.
      This parameter specifies the max input for the internal QoS nodes currently
      available to this function.  The function's TX rings will be capped by this
      parameter.  By adding this logic, we provide a more accurate pre-set max
      TX channels to the user.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db4723b3
    • Vasundhara Volam's avatar
      bnxt_en: Add extended port statistics support · 00db3cba
      Vasundhara Volam authored
      Gather periodic extended port statistics, if the device is PF and
      link is up.
      Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      00db3cba
    • Vasundhara Volam's avatar
      bnxt_en: Include additional hardware port statistics in ethtool -S. · 699efed0
      Vasundhara Volam authored
      Include additional hardware port statistics in ethtool -S, which
      are useful for debugging.
      Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      699efed0
    • Vasundhara Volam's avatar
      bnxt_en: Add support for ndo_set_vf_trust · 746df139
      Vasundhara Volam authored
      Trusted VFs are allowed to modify MAC address, even when PF
      has assigned one.
      Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      746df139
    • Scott Branden's avatar
      bnxt_en: fix clear flags in ethtool reset handling · 2373d8d6
      Scott Branden authored
      Clear flags when reset command processed successfully for components
      specified.
      
      Fixes: 6502ad59 ("bnxt_en: Add ETH_RESET_AP support")
      Signed-off-by: default avatarScott Branden <scott.branden@broadcom.com>
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2373d8d6
    • Michael Chan's avatar
      bnxt_en: Use a dedicated VNIC mode for RDMA. · abe93ad2
      Michael Chan authored
      If the RDMA driver is registered, use a new VNIC mode that allows
      RDMA traffic to be seen on the netdev in promiscuous mode.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      abe93ad2
    • Michael Chan's avatar
      bnxt_en: Adjust default rings for multi-port NICs. · 1d3ef13d
      Michael Chan authored
      Change the default ring logic to select default number of rings to be up to
      8 per port if the default rings x NIC ports <= total CPUs.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d3ef13d
    • Michael Chan's avatar
      bnxt_en: Update firmware interface to 1.9.1.15. · d4f52de0
      Michael Chan authored
      Minor changes, such as new extended port statistics.
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4f52de0
    • Wei Yongjun's avatar
      vlan: vlan_hw_filter_capable() can be static · eeb0a2a5
      Wei Yongjun authored
      Fixes the following sparse warning:
      
      net/8021q/vlan_core.c:168:6: warning:
       symbol 'vlan_hw_filter_capable' was not declared. Should it be static?
      Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eeb0a2a5
    • David S. Miller's avatar
      Merge tag 'mlx5-updates-2018-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · 8bde261e
      David S. Miller authored
      Saeed Mahameed says:
      
      ====================
      mlx5-updates-2018-03-30
      
      This series contains updates to mlx5 core and mlx5e netdev drivers.
      The main highlight of this series is the RX optimizations for striding RQ path,
      introduced by Tariq.
      
      First Four patches are trivial misc cleanups.
       - Spelling mistake fix
       - Dead code removal
       - Warning messages
      
      RX optimizations for striding RQ:
      
      1) RX refactoring, cleanups and micro optimizations
         - MTU calculation simplifications, obsoletes some WQEs-to-packets translation
           functions and helps delete ~60 LOC.
         - Do not busy-wait a pending UMR completion.
         - post the new values of UMR WQE inline, instead of using a data pointer.
         - use pre-initialized structures to save calculations in datapath.
      
      2) Use linear SKB in Striding RQ "build_skb", (Using linear SKB has many advantages):
          - Saves a memcpy of the headers.
          - No page-boundary checks in datapath.
          - No filler CQEs.
          - Significantly smaller CQ.
          - SKB data continuously resides in linear part, and not split to
            small amount (linear part) and large amount (fragment).
            This saves datapath cycles in driver and improves utilization
            of SKB fragments in GRO.
          - The fragments of a resulting GRO SKB follow the IP forwarding
            assumption of equal-size fragments.
      
          implementation details:
          HW writes the packets to the beginning of a stride,
          i.e. does not keep headroom. To overcome this we make sure we can
          extend backwards and use the last bytes of stride i-1.
          Extra care is needed for stride 0 as it has no preceding stride.
          We make sure headroom bytes are available by shifting the buffer
          pointer passed to HW by headroom bytes.
      
          This configuration now becomes default, whenever capable.
          Of course, this implies turning LRO off.
      
          Performance testing:
          ConnectX-5, single core, single RX ring, default MTU.
      
          UDP packet rate, early drop in TC layer:
      
          --------------------------------------------
          | pkt size | before    | after     | ratio |
          --------------------------------------------
          | 1500byte | 4.65 Mpps | 5.96 Mpps | 1.28x |
          |  500byte | 5.23 Mpps | 5.97 Mpps | 1.14x |
          |   64byte | 5.94 Mpps | 5.96 Mpps | 1.00x |
          --------------------------------------------
      
          TCP streams: ~20% gain
      
      3) Support XDP over Striding RQ:
          Now that linear SKB is supported over Striding RQ,
          we can support XDP by setting stride size to PAGE_SIZE
          and headroom to XDP_PACKET_HEADROOM.
      
          Striding RQ is capable of a higher packet-rate than
          conventional RQ.
      
          Performance testing:
          ConnectX-5, 24 rings, default MTU.
          CQE compression ON (to reduce completions BW in PCI).
      
          XDP_DROP packet rate:
          --------------------------------------------------
          | pkt size | XDP rate   | 100GbE linerate | pct% |
          --------------------------------------------------
          |   64byte | 126.2 Mpps |      148.0 Mpps |  85% |
          |  128byte |  80.0 Mpps |       84.8 Mpps |  94% |
          |  256byte |  42.7 Mpps |       42.7 Mpps | 100% |
          |  512byte |  23.4 Mpps |       23.4 Mpps | 100% |
          --------------------------------------------------
      
      4) Remove mlx5 page_ref bulking in Striding RQ and use page_ref_inc only when needed.
         Without this bulking, we have:
          - no atomic ops on WQE allocation or free
          - one atomic op per SKB
          - In the default MTU configuration (1500, stride size is 2K),
            the non-bulking method execute 2 atomic ops as before
          - For larger MTUs with stride size of 4K, non-bulking method
            executes only a single op.
          - For XDP (stride size of 4K, no SKBs), non-bulking have no atomic ops per packet at all.
      
          Performance testing:
          ConnectX-5, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz.
      
          Single core packet rate (64 bytes).
      
          Early drop in TC: no degradation.
      
          XDP_DROP:
          before: 14,270,188 pps
          after:  20,503,603 pps, 43% improvement.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8bde261e
    • David S. Miller's avatar
      Merge tag 'rxrpc-next-20180330' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs · e2e80c02
      David S. Miller authored
      David Howells says:
      
      ====================
      rxrpc: Fixes and more traces
      
      Here are some patches that add some more tracepoints to AF_RXRPC and fix
      some issues therein:
      
       (1) Fix the use of VERSION packets to keep firewall routes open.
      
       (2) Fix the incorrect current time usage in a tracepoint.
      
       (3) Fix Tx ring annotation corruption.
      
       (4) Fix accidental conversion of call-level abort into connection-level
           abort.
      
       (5) Fix calculation of resend time.
      
       (6) Remove a couple of unused variables.
      
       (7) Fix a bunch of checker warnings and an error.  Note that not all
           warnings can be quashed as checker doesn't seem to correctly handle
           seqlocks.
      
       (8) Fix a potential race between call destruction and socket/net
           destruction.
      
       (9) Add a tracepoint to track rxrpc_local refcounting.
      
      (10) Fix an apparent leak of rxrpc_local objects.
      
      (11) Add a tracepoint to track rxrpc_peer refcounting.
      
      (12) Fix a leak of rxrpc_peer objects.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2e80c02
    • Haiyang Zhang's avatar
      hv_netvsc: Clean up extra parameter from rndis_filter_receive_data() · 3be9b5fd
      Haiyang Zhang authored
      The variables, msg and data, have the same value. This patch removes
      the extra one.
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3be9b5fd
    • Joe Perches's avatar
      ethernet: hisilicon: hns: hns_dsaf_mac: Use generic eth_broadcast_addr · 49b44aa2
      Joe Perches authored
      Rather than use an on-stack array to copy a broadcast address, use
      the generic eth_broadcast_addr function to save a trivial amount of
      object code.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49b44aa2
    • David S. Miller's avatar
      Merge branch 'net_rwsem-fixes' · b3834acd
      David S. Miller authored
      Kirill Tkhai says:
      
      ====================
      net_rwsem fixes
      
      there is wext_netdev_notifier_call()->wireless_nlevent_flush()
      netdevice notifier, which takes net_rwsem, so we can't take
      net_rwsem in {,un}register_netdevice_notifier().
      
      Since {,un}register_netdevice_notifier() is executed under
      pernet_ops_rwsem, net_namespace_list can't change, while we
      holding it, so there is no need net_rwsem in these functions [1/2].
      
      The same is in [2/2]. We make callers of __rtnl_link_unregister()
      take pernet_ops_rwsem, and close the race with setup_net()
      and cleanup_net(), so __rtnl_link_unregister() does not need it.
      This also fixes the problem of that __rtnl_link_unregister() does
      not see initializing and exiting nets.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b3834acd
    • Kirill Tkhai's avatar
      net: Do not take net_rwsem in __rtnl_link_unregister() · 554873e5
      Kirill Tkhai authored
      This function calls call_netdevice_notifier(), which also
      may take net_rwsem. So, we can't use net_rwsem here.
      
      This patch makes callers of this functions take pernet_ops_rwsem,
      like register_netdevice_notifier() does. This will protect
      the modifications of net_namespace_list, and allows notifiers
      to take it (they won't have to care about context).
      
      Since __rtnl_link_unregister() is used on module load
      and unload (which are not frequent operations), this looks
      for me better, than make all call_netdevice_notifier()
      always executing in "protected net_namespace_list" context.
      
      Also, this fixes the problem we had a deal in 328fbe74
      "Close race between {un, }register_netdevice_notifier and ...",
      and guarantees __rtnl_link_unregister() does not skip
      exitting net.
      Signed-off-by: default avatarKirill Tkhai <ktkhai@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      554873e5
    • Kirill Tkhai's avatar
      net: Remove net_rwsem from {, un}register_netdevice_notifier() · fc1dd369
      Kirill Tkhai authored
      These functions take net_rwsem, while wireless_nlevent_flush()
      also takes it. But down_read() can't be taken recursive,
      because of rw_semaphore design, which prevents it to be occupied
      by only readers forever.
      
      Since we take pernet_ops_rwsem in {,un}register_netdevice_notifier(),
      net list can't change, so these down_read()/up_read() can be removed.
      
      Fixes: f0b07bb1 "net: Introduce net_rwsem to protect net_namespace_list"
      Signed-off-by: default avatarKirill Tkhai <ktkhai@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc1dd369
    • Wei Yongjun's avatar
      net: hns3: remove unnecessary pci_set_drvdata() and devm_kfree() · c679f6a2
      Wei Yongjun authored
      There is no need for explicit calls of devm_kfree(), as the allocated
      memory will be freed during driver's detach.
      
      The driver core clears the driver data to NULL after device_release.
      Thus, it is not needed to manually clear the device driver data to NULL.
      
      So remove the unnecessary pci_set_drvdata() and devm_kfree().
      Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c679f6a2
    • David Ahern's avatar
      netdevsim: Change nsim_devlink_setup to return error to caller · ef817102
      David Ahern authored
      Change nsim_devlink_setup to return any error back to the caller and
      update nsim_init to handle it.
      Requested-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef817102
    • David S. Miller's avatar
      Merge branch 'tipc-slim-down-name-table' · 6851cf28
      David S. Miller authored
      Jon Maloy says:
      
      ====================
      tipc: slim down name table
      
      We clean up and improve the name binding table:
      
       - Replace the memory consuming 'sub_sequence/service range' array with
         an RB tree.
       - Introduce support for overlapping service sequences/ranges
      
       v2: #1: Fixed a missing initialization reported by David Miller
           #4: Obsoleted and replaced a few more macros to get a consistent
               terminology in the API.
           #5: Added new commit to fix a potential string overflow bug (it
               is still only in net-next) reported by Arnd Bergmann
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6851cf28
    • Jon Maloy's avatar
      tipc: avoid possible string overflow · 7494cfa6
      Jon Maloy authored
      gcc points out that the combined length of the fixed-length inputs to
      l->name is larger than the destination buffer size:
      
      net/tipc/link.c: In function 'tipc_link_create':
      net/tipc/link.c:465:26: error: '%s' directive writing up to 32 bytes
      into a region of size between 26 and 58 [-Werror=format-overflow=]
      sprintf(l->name, "%s:%s-%s:unknown", self_str, if_name, peer_str);
      
      net/tipc/link.c:465:2: note: 'sprintf' output 11 or more bytes
      (assuming 75) into a destination of size 60
      sprintf(l->name, "%s:%s-%s:unknown", self_str, if_name, peer_str);
      
      A detailed analysis reveals that the theoretical maximum length of
      a link name is:
      max self_str + 1 + max if_name + 1 + max peer_str + 1 + max if_name =
      16 + 1 + 15 + 1 + 16 + 1 + 15 = 65
      Since we also need space for a trailing zero we now set MAX_LINK_NAME
      to 68.
      
      Just to be on the safe side we also replace the sprintf() call with
      snprintf().
      
      Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address
      hash values")
      Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7494cfa6
    • Jon Maloy's avatar
      tipc: tipc: rename address types in user api · 7a74d39c
      Jon Maloy authored
      The three address type structs in the user API have names that in
      reality reflect the specific, non-Linux environment where they were
      originally created.
      
      We now give them more intuitive names, in accordance with how TIPC is
      described in the current documentation.
      
      struct tipc_portid   -> struct tipc_socket_addr
      struct tipc_name     -> struct tipc_service_addr
      struct tipc_name_seq -> struct tipc_service_range
      
      To avoid confusion, we also update some commmets and macro names to
       match the new terminology.
      
      For compatibility, we add macros that map all old names to the new ones.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a74d39c
    • Jon Maloy's avatar
      tipc: permit overlapping service ranges in name table · 37922ea4
      Jon Maloy authored
      With the new RB tree structure for service ranges it becomes possible to
      solve an old problem; - we can now allow overlapping service ranges in
      the table.
      
      When inserting a new service range to the tree, we use 'lower' as primary
      key, and when necessary 'upper' as secondary key.
      
      Since there may now be multiple service ranges matching an indicated
      'lower' value, we must also add the 'upper' value to the functions
      used for removing publications, so that the correct, corresponding
      range item can be found.
      
      These changes guarantee that a well-formed publication/withdrawal item
      from a peer node never will be rejected, and make it possible to
      eliminate the problematic backlog functionality we currently have for
      handling such cases.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37922ea4
    • Jon Maloy's avatar
      tipc: refactor name table translate function · f20889f7
      Jon Maloy authored
      The function tipc_nametbl_translate() function is ugly and hard to
      follow. This can be improved somewhat by introducing a stack variable
      for holding the publication list to be used and re-ordering the if-
      clauses for selection of algorithm.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f20889f7
    • Jon Maloy's avatar
      tipc: replace name table service range array with rb tree · 218527fe
      Jon Maloy authored
      The current design of the binding table has an unnecessary memory
      consuming and complex data structure. It aggregates the service range
      items into an array, which is expanded by a factor two every time it
      becomes too small to hold a new item. Furthermore, the arrays never
      shrink when the number of ranges diminishes.
      
      We now replace this array with an RB tree that is holding the range
      items as tree nodes, each range directly holding a list of bindings.
      
      This, along with a few name changes, improves both readability and
      volume of the code, as well as reducing memory consumption and hopefully
      improving cache hit rate.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      218527fe
    • David S. Miller's avatar
      Merge branch 'bridge-mtu' · 24197ee2
      David S. Miller authored
      Nikolay Aleksandrov says:
      
      ====================
      net: bridge: MTU handling changes
      
      As previously discussed the recent changes break some setups and could lead
      to packet drops. Thus the first patch reverts the behaviour for the bridge
      to follow the minimum MTU but also keeps the ability to set the MTU to the
      maximum (out of all ports) if vlan filtering is enabled. Patch 02 is the
      bigger change in behaviour - we've always had trouble when configuring
      bridges and their MTU which is auto tuning on port events
      (add/del/changemtu), which means config software needs to chase it and fix
      it after each such event, after patch 02 we allow the user to configure any
      MTU (ETH_MIN/MAX limited) but once that is done the bridge stops auto
      tuning and relies on the user to keep the MTU correct.
      This should be compatible with cases that don't touch the MTU (or set it
      to the same value), while allowing to configure the MTU and not worry
      about it changing afterwards.
      
      The patches are intentionally split like this, so that if they get accepted
      and there are any complaints patch 02 can be reverted.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      24197ee2
    • Nikolay Aleksandrov's avatar
      net: bridge: disable bridge MTU auto tuning if it was set manually · 804b854d
      Nikolay Aleksandrov authored
      As Roopa noted today the biggest source of problems when configuring
      bridge and ports is that the bridge MTU keeps changing automatically on
      port events (add/del/changemtu). That leads to inconsistent behaviour
      and network config software needs to chase the MTU and fix it on each
      such event. Let's improve on that situation and allow for the user to
      set any MTU within ETH_MIN/MAX limits, but once manually configured it
      is the user's responsibility to keep it correct afterwards.
      
      In case the MTU isn't manually set - the behaviour reverts to the
      previous and the bridge follows the minimum MTU.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      804b854d
    • Nikolay Aleksandrov's avatar
      net: bridge: set min MTU on port events and allow user to set max · f40aa233
      Nikolay Aleksandrov authored
      Recently the bridge was changed to automatically set maximum MTU on port
      events (add/del/changemtu) when vlan filtering is enabled, but that
      actually changes behaviour in a way which breaks some setups and can lead
      to packet drops. In order to still allow that maximum to be set while being
      compatible, we add the ability for the user to tune the bridge MTU up to
      the maximum when vlan filtering is enabled, but that has to be done
      explicitly and all port events (add/del/changemtu) lead to resetting that
      MTU to the minimum as before.
      Suggested-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f40aa233
    • David S. Miller's avatar
      Merge branch 'thunderx-DMAC-filtering' · 56c03cbf
      David S. Miller authored
      Vadim Lomovtsev says:
      
      ====================
      net: thunderx: implement DMAC filtering support
      
      By default CN88XX BGX accepts all incoming multicast and broadcast
      packets and filtering is disabled. The nic driver doesn't provide
      an ability to change such behaviour.
      
      This series is to implement DMAC filtering management for CN88XX
      nic driver allowing user to enable/disable filtering and configure
      specific MAC addresses to filter traffic.
      
      Changes from v1:
      build issues:
       - update code in order to address compiler warnings;
      checkpatch.pl reported issues:
       - update code in order to fit 80 symbols length;
       - update commit descriptions in order to fit 80 symbols length;
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      56c03cbf
    • Vadim Lomovtsev's avatar
      net: thunderx: add ndo_set_rx_mode callback implementation for VF · 37c3347e
      Vadim Lomovtsev authored
      The ndo_set_rx_mode() is called from atomic context which causes
      messages response timeouts while VF to PF communication via MSIx.
      To get rid of that we're copy passed mc list, parse flags and queue
      handling of kernel request to ordered workqueue.
      Signed-off-by: default avatarVadim Lomovtsev <Vadim.Lomovtsev@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37c3347e