- 19 Sep, 2007 22 commits
-
-
Michael Ellerman authored
Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Acked-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
The SPUFS attribute get routines take a void * because the generic attribute code doesn't know what sort of data it's passing around. However our internal __spufs_get_foo() routines can take a spu_context * directly, which saves plonking it in and out of a void * again. Signed-off-by:
-
Michael Ellerman authored
The spufs_coredump_read array is NULL terminated, and we also store the size. We only need one or the other, and the other arrays in file.c are NULL terminated, so do that. Signed-off-by:
-
Michael Ellerman authored
Because the SPU coredump code might be built as part of a module (spufs), we have a stub which is called by the coredump code, this routine then calls into spufs if it's loaded. Unfortunately the stub returns -ENOSYS if spufs is not loaded, which is interpreted by the coredump code as an extra note size of -38 bytes. This leads to a corrupt core dump. If spufs is not loaded there will be no SPU ELF notes to write, and so the extra notes size will be == 0. Signed-off-by:
-
Michael Ellerman authored
The routine to dump the local store, __spufs_mem_read(), does not take the spu_lslr_RW value into account - so we shouldn't check it when we're calculating the size either. Signed-off-by:
-
Michael Ellerman authored
Unfortunately GDB expects some of the SPU coredump values to be identical in format to what is found in spufs. This means we need to dump some of the values as ASCII strings, not the actual values. Because we don't know what the values will be, we always print the values with the format "0x%.16lx", that way we know the result will be 19 bytes. do_coredump_read() doesn't take a __user buffer, so remove the annotation, and because we know that it's safe to just snprintf() directly to it. Signed-off-by:
-
Michael Ellerman authored
The spufs_coredump_reader array contains the size of the data that will be returned by the read routine. Currently these are specified as literals, and though some are obvious, sizeof(u32) == 4, others are not, 69 * 8 == ??? Instead, use sizeof() whatever type is returned by each routine, or in the case of spufs_mem_read() the #define LS_SIZE. Signed-off-by:
-
Michael Ellerman authored
It makes sense to stop the SPU processes as soon as possible. Also if we dont acquire_saved() I think there's a possibility that the value in csa.priv2.spu_lslr_RW won't be accurate. Signed-off-by:
-
Michael Ellerman authored
Remove the ctx_info struct entirely, and also the ctx_info_list. This fixes a race where two processes can clobber each other's ctx_info structs. Instead of using the list, we just repeat the search through the file descriptor table. Signed-off-by:
-
Michael Ellerman authored
Extract the logic for searching through the file descriptors for spu contexts into a separate routine, coredump_next_context(), so we can use it elsewhere in future. In the process we flatten the for loop, and move the NOSCHED test into coredump_next_context(). Signed-off-by:
-
Jeremy Kerr authored
We don't want SPE programs to be able to flood the kernel log by invoking the SPE callback handler, so don't enable DEBUG for spu_callbacks.c by default. Signed-off-by:
-
Jeremy Kerr authored
Based on an original patch from Masato Noguchi <Masato.Noguchi@jp.sony.com>. We're currently not restoring the SPE decrementer as specified by the CBE handbook. This change fixes our implementation to match, and makes the function read more like the docs. Signed-off-by:
-
Jeremy Kerr authored
spu_create and spu_run are wrapped by the cell syscall layer, so we don't need the asmlinkage. Signed-off-by:
-
Jeremy Kerr authored
At present, a built-in spufs will not use the spufs_calls callbacks, but directly call sys_spu_create. This saves us an indirect branch, but means we have duplicated functions - one for CONFIG_SPU_FS=y and one for =m. This change unifies the spufs syscall path, and provides access to the spufs_calls structure through a get/put pair. At present, the only user of the spufs_calls structure is spu_syscalls.c, but this will facilitate adding the coredump calls later. Everyone likes numbers, right? Here's a before/after comparison with CONFIG_SPU_FS=y, doing spu_create(); close(); 64k times. Before: [jk@cell ~]$ time ./spu_create performing 65536 spu_create calls real 0m24.075s user 0m0.146s sys 0m23.925s After: [jk@cell ~]$ time ./spu_create performing 65536 spu_create calls real 0m24.777s user 0m0.141s sys 0m24.631s So, we're adding around 11us per syscall, at the benefit of having only one syscall path. Signed-off-by:
-
Andre Detsch authored
Affinity reference point location (gang->aff_ref_spu) is reset when the whole gang is descheduled. However, the last member of a gang can be descheduled while we are trying to schedule another member of the gang. This was leading to a race condition, and the code was using gang->aff_ref_spu in an unsafe manner. By holding the gang->aff_mutex a little bit longer, and increment gang->aff_sched_count (which controls when gang->aff_ref_spu should be reset) a little bit earlier, the problem is fixed. Signed-off-by:
Andre Detsch <adetsch@br.ibm.com> Signed-off-by:
-
Sebastian Siewior authored
According to the comment in spufs_init_isolated_loader(), the isolated loader should be aligned on a 16 byte boundary. ARCH_{KMALLOC,SLAB}_MINALIGN is not defined so only 8 byte alignment is guaranteed. This enforces alignment via __get_free_pages. Signed-off-by:Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by:
-
Jeremy Kerr authored
Based on an initial patch from Sebastian Siewior <sebastian@breakpoint.cc> spu_harvest isn't used, remove it. Signed-off-by:
-
Jeremy Kerr authored
do_spu_create doesn't need the asmlinkage qualifier; remove it. Signed-off-by:
-
Sebastian Siewior authored
There are a few symbols used only in one file within spufs; this change makes them static where suitable. Signed-off-by:
-
Olaf Hering authored
drivers/serial/pmac_zilog.c:1590: warning: format '%d' expects type 'int', but argument 3 has type 'pm_message_t' Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Michael Neuling authored
After talking to an IBM POWER hypervisor (PHYP) design and development guy, there seems to be no need for memory barriers when updating the SLB shadow buffer provided we only update it from the current CPU, which we do. Also, these guys see no need in the future for these barriers. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Jesper Juhl authored
kmalloc() returns a void pointer so there is absolutely no need to cast it in ibmebus_chomp(). Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
- 17 Sep, 2007 1 commit
-
-
Adrian Bunk authored
Current status of APUS: - arch/powerpc/: removed in 2.6.23 - arch/ppc/: marked BROKEN since 2 years This therefore removes the remaining parts of APUS support from arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
- 14 Sep, 2007 17 commits
-
-
Anton Vorontsov authored
Enabled using SPI controller on the MPC832x RDB board. We currently use a modalias of "spidev" as a place holder (replace with "mmc_spie") until the mmc_spi driver support is merged in. This gets us the ability to test SPI until then. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Anton Vorontsov authored
Add helper function to setup SPI bus/device information Signed-off-by:
-
John Rigby authored
Use idx as index into mpc52xx_uart_nodes instead of i Signed-off-by:
John Rigby <jrigby@freescale.com> Signed-off-by:
-
Timur Tabi authored
The current definition of struct ccsr_guts in immap_86xx.h was for 85xx. This patch fixes that and replaces the vague integer types with sized types of the correct endianness. The unused struct ccsr_pci is also deleted. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Timur Tabi authored
This patch adds the clrsetbits_xxx() macros, which are used to set and clear multiple bits in a single read-modify-write operation. Specify the bits to clear in the 'clear' parameter and the bits to set in the 'set' parameter. These macros can also be used to set a multiple-bit bit pattern using a mask, by specifying the mask in the 'clear' parameter and the new bit pattern in the 'set' parameter. There are big-endian and little-endian versions for 8, 16, 32, and 64 bits. Signed-off-by:
-
Anton Vorontsov authored
This is needed to configure and control QE pario pins from the kernel. Signed-off-by:
-
Scott Wood authored
These I/O accessors will be used in code under drivers/, which is expected to still work in arch/ppc. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Kumar Gala authored
We get warnings like the following from the various ppc32 head*.S files: WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') Added a .text.head section simliar to what other architectures do since modpost already excludes this from its warnings. Signed-off-by: -
Kumar Gala authored
Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: -
Kumar Gala authored
Now that the generic code doesn't assign resources for Freescale PHBs we dont have to explicitly exclude it. Signed-off-by: -
Kumar Gala authored
Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: -
Kumar Gala authored
Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: -
Kumar Gala authored
Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: -
Kumar Gala authored
This adds code to handle alignment traps generated by the following SPE (signal processing engine) load/store instructions, by emulating the instruction in the kernel (as is done for other instructions that generate alignment traps): evldd[x] Vector Load Double Word into Double Word [Indexed] evldw[x] Vector Load Double into Two Words [Indexed] evldh[x] Vector Load Double into Four Half Words [Indexed] evlhhesplat[x] Vector Load Half Word into Half Words Even and Splat [Indexed] evlhhousplat[x] Vector Load Half Word into Half Word Odd Unsigned and Splat [Indexed] evlhhossplat[x] Vector Load Half Word into Half Word Odd Signed and Splat [Indexed] evlwhe[x] Vector Load Word into Two Half Words Even [Indexed] evlwhou[x] Vector Load Word into Two Half Words Odd Unsigned (zero-extended) [Indexed] evlwhos[x] Vector Load Word into Two Half Words Odd Signed (with sign extension) [Indexed] evlwwsplat[x] Vector Load Word into Word and Splat [Indexed] evlwhsplat[x] Vector Load Word into Two Half Words and Splat [Indexed] evstdd[x] Vector Store Double of Double [Indexed] evstdw[x] Vector Store Double of Two Words [Indexed] evstdh[x] Vector Store Double of Four Half Words [Indexed] evstwhe[x] Vector Store Word of Two Half Words from Even [Indexed] evstwho[x] Vector Store Word of Two Half Words from Odd [Indexed] evstwwe[x] Vector Store Word of Word from Even [Indexed] evstwwo[x] Vector Store Word of Word from Odd [Indexed] Signed-off-by: -
Scott Wood authored
1. Update the way get_brgfreq() finds things in the device tree. It now uses names that are less namespace polluting. The old names are supported until all boards are converted. 2. "size" is changed from unsigned int to int, to match what of_get_property() expects. Signed-off-by:
-
Jon Loeliger authored
Signed-off-by:
Jon Loeliger <jdl@freescale.com> Signed-off-by:
-
Jon Loeliger authored
Signed-off-by:
-
