Skip to content

L
linux
Switch branch/tag
  1. 27 Feb, 2010 24 commits
  3. 26 Feb, 2010 16 commits
    • Konrad Rzeszutek Wilk's avatar
      ibft: Update MAINTAINERS file. · c4d1409b
      Konrad Rzeszutek Wilk authored 
      Provide the right e-mail and names for me and Peter.
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad@kernel.org>
      c4d1409b
    • Joe Perches's avatar
      drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4 · 00e7825b
      Joe Perches authored 
      Convert netmask to __be32 and format it with %pI4
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarKonrad Rzeszutek <ketuzsezr@darnok.org>
Reviewed-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      00e7825b
    • Alex Elder's avatar
      Merge branch 'linux-2.6.33' · 398007f8
      Alex Elder authored
      398007f8
    • Rafael J. Wysocki's avatar
      PM / Hibernate: Fix preallocating of memory · a9c9b442
      Rafael J. Wysocki authored 
      The hibernate memory preallocation code allocates memory to push some
user space data out of physical RAM, so that the hibernation image is
not too large.  It allocates more memory than necessary for creating
the image, so it has to release some pages to make room for
allocations made while suspending devices and disabling nonboot CPUs,
or the system will hang due to the lack of free pages to allocate
from.  Unfortunately, the function used for freeing these pages,
free_unnecessary_pages(), contains a bug that prevents it from doing
the job on all systems without highmem.

Fix this problem, which is a regression from the 2.6.30 kernel, by
using the right condition for the termination of the loop in
free_unnecessary_pages().
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: default avatarAlan Jenkins <sourcejedi.lkml@googlemail.com>
Cc: stable@kernel.org
      a9c9b442
    • Jiri Slaby's avatar
      PM / Hibernate: Remove swsusp.c finally · f8bb0db8
      Jiri Slaby authored 
      Its contents and entry in Makefile were already removed in
8e60c6a1
(Shift remaining code from swsusp.c to hibernate.c)
but somehow it remained in-place (rjw: which most likely was my
mistake).
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
Acked-by: default avatarNigel Cunningham <nigel@tuxonice.net>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      f8bb0db8
    • Frans Pop's avatar
      PM / Hibernate: Remove trailing space in message · 07c3bb57
      Frans Pop authored 
      Remove a trailing space from a message in swsusp_save().
Signed-off-by: default avatarFrans Pop <elendil@planet.nl>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      07c3bb57
    • Rafael J. Wysocki's avatar
      PM: Allow SCSI devices to suspend/resume asynchronously · 4cb077d9
      Rafael J. Wysocki authored 
      Set power.async_suspend for all SCSI devices, targets and hosts, so
that they can be suspended and resumed in parallel with the main
suspend/resume thread and possibly with other devices they don't
depend on in a known way (i.e. devices which are not their parents or
children).

The power.async_suspend flag is also set for devices that don't have
suspend or resume callbacks, because otherwise they would make the
main suspend/resume thread wait for their "asynchronous" children
(during suspend) or parents (during resume), effectively negating the
possible gains from executing these devices' suspend and resume
callbacks asynchronously.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      4cb077d9
    • Rafael J. Wysocki's avatar
      PM: Allow USB devices to suspend/resume asynchronously · 927bc916
      Rafael J. Wysocki authored 
      Set power.async_suspend for USB devices, endpoints and interfaces,
allowing them to be suspended and resumed asynchronously during
system sleep transitions.

The power.async_suspend flag is also set for devices that don't have
suspend or resume callbacks, because otherwise they would make the
main suspend/resume thread wait for their "asynchronous" children
(during suspend) or parents (during resume), effectively negating the
possible gains from executing these devices' suspend and resume
callbacks asynchronously.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      927bc916
    • Alan Stern's avatar
      USB: implement non-tree resume ordering constraints for PCI host controllers · 6d19c009
      Alan Stern authored 
      This patch (as1331) adds non-tree ordering constraints needed for
proper resume of PCI USB host controllers from hibernation.  The main
issue is that non-high-speed devices must not be resumed before the
high-speed root hub, because it is the ehci_bus_resume() routine which
takes care of handing the device connection over to the companion
controller.  If the device resume is attempted before the handover
then the device won't be found and it will be treated as though it had
disconnected.

The patch adds a new field to the usb_bus structure; for each
full/low-speed bus this field will contain a pointer to the companion
high-speed bus (if one exists).  It is used during normal device
resume; if the hs_companion pointer isn't NULL then we wait for the
root-hub device on the hs_companion bus.

A secondary issue is that an EHCI controlller shouldn't be resumed
before any of its companions.  On some machines I have observed
handovers failing if the companion controller is reinitialized after
the handover.  Thus, the EHCI resume routine must wait for the
companion controllers to be resumed.

The patch also fixes a small bug in usb_hcd_pci_probe(); an error path
jumps to the wrong label, causing a memory leak.

[rjw: Fixed compilation for CONFIG_PM_SLEEP unset.]
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      6d19c009
    • Rafael J. Wysocki's avatar
      PM: Allow PCI devices to suspend/resume asynchronously · a1e4d72c
      Rafael J. Wysocki authored 
      Set power.async_suspend for all PCI devices and PCIe port services,
so that they can be suspended and resumed in parallel with other
devices they don't depend on in a known way (i.e. devices which are
not their parents or children).

This only affects the "regular" suspend and resume stages, which
means in particular that the restoration of the PCI devices' standard
configuration registers during resume will still be carried out
synchronously (at the "early" resume stage).
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      a1e4d72c
    • Jiri Slaby's avatar
      PM / Hibernate: Swap, remove useless check from swsusp_read() · 09c09bc6
      Jiri Slaby authored 
      It will never reach here if the sws_resume_bdev is erratic.
swsusp_read() is called only from software_resume(), but after
swsusp_check() which would catch the error state.
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      09c09bc6
    • Jiri Slaby's avatar
      PM / Hibernate: Really deprecate deprecated user ioctls · b694e52e
      Jiri Slaby authored 
      They were deprecated and removed from exported headers more than 2
years ago. Inform users about their removal in the future now.

(Switch cases needed to be reorderded for an easy fall through.)

And add an entry to feature-removal-schedule.
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      b694e52e
    • Rafael J. Wysocki's avatar
      PM: Allow device drivers to use dpm_wait() · f8824cee
      Rafael J. Wysocki authored 
      There are some dependencies between devices (in particular, between
EHCI USB controllers and their OHCI/UHCI siblings) which are not
reflected by the structure of the device tree.  With synchronous
suspend and resume these dependencies are taken into accout
automatically, because the devices in question are always registered
in the right order, but to meet these constraints with asynchronous
suspend and resume the drivers of these devices will need to use
dpm_wait() in their suspend/resume routines, so introduce a helper
function allowing them to do that.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      f8824cee
    • Rafael J. Wysocki's avatar
      PM: Start asynchronous resume threads upfront · 97df8c12
      Rafael J. Wysocki authored 
      It has been shown by testing that total device resume time can be
reduced significantly (by as much as 50% or more) if the async
threads executing some devices' resume routines are all started
before the main resume thread starts to handle the "synchronous"
devices.

This is a consequence of the fact that the slowest devices tend to be
located at the end of dpm_list, so their resume routines are started
very late.  Consequently, they have to wait for all the preceding
"synchronous" devices before their resume routines can be started
by the main resume thread, even if they are "asynchronous".  By
starting their async threads upfront we effectively move those
devices towards the beginning of dpm_list, without breaking their
ordering with respect to their parents and children.  As a result,
their resume routines are started much earlier and we are able to
save much more device resume time this way.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      97df8c12
    • Rafael J. Wysocki's avatar
      PM: Add facility for advanced testing of async suspend/resume · 5a2eb858
      Rafael J. Wysocki authored 
      Add configuration switch CONFIG_PM_ADVANCED_DEBUG for compiling in
extra PM debugging/testing code allowing one to access some
PM-related attributes of devices from the user space via sysfs.

If CONFIG_PM_ADVANCED_DEBUG is set, add sysfs attribute power/async
for every device allowing the user space to access the device's
power.async_suspend flag and modify it, if desired.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      5a2eb858
    • Rafael J. Wysocki's avatar
      PM: Add a switch for disabling/enabling asynchronous suspend/resume · 0e06b4a8
      Rafael J. Wysocki authored 
      Add sysfs attribute /sys/power/pm_async allowing the user space to
disable/enable asynchronous suspend/resume of devices.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      0e06b4a8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7