- 19 Jan, 2018 35 commits
-
-
Jakub Kicinski authored
Most vNIC capabilities are netdev related. It makes no sense to initialize them and waste FW resources. Some are even counter-productive, like IRQ moderation, which will slow down exchange of control messages. Add to nfp_app a mask of enabled control vNIC capabilities for apps to use. Make flower and BPF enable all capabilities for now. No functional changes. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
nfp_net_init() is a little long and we are about to add more code to reading capabilties. Move the capability reading, parsing and validating out. Only actual initialization will stay in nfp_net_init(). No functional changes. Signed-off-by:
-
Jakub Kicinski authored
Allow specifying alternative vNIC mailbox location in TLV caps. This way we can size the mailbox to the needs and not necessarily waste 512B of ctrl memory space. Signed-off-by:
-
Jakub Kicinski authored
PCIe island clock frequency is used when converting coalescing parameters from usecs to NFP timestamps. Most chips don't run at 1200MHz, allow FW to provide us with the real frequency. Signed-off-by:
-
Jakub Kicinski authored
NFP is entirely programmable, including the PCI data interface. Using a fixed control BAR layout certainly makes implementations easier, but require careful considerations when space is allocated. Once BAR area is allocated to one feature nothing else can use it. Allocating space statically also requires it to be sized upfront, which leads to either unnecessary limitation or wastage. We currently have a 32bit capability word defined which tells drivers which application FW features are supported. Most of the bits are exhausted. The same bits are also reused for enabling specific features. Bulk of capabilities don't have a need for an enable bit, however, leading to confusion and wastage. TLVs seems like a better fit for expressing capabilities of applications running on programmable hardware. This patch leaves the front of the BAR as is, and declares a TLV capability start at offset 0x58. Most of the space up to 0x0d90 is already allocated, but the used space can be wrapped with RESERVED TLVs. E.g.: Address Type Length 0x0058 RESERVED 0xe00 /* Wrap basic structures */ 0x0e5c FEATURE_A 0x004 0x0e64 FEATURE_B 0x004 0x0e6c RESERVED 0x990 /* Wrap qeueue stats */ 0x1800 FEATURE_C 0x100 Signed-off-by:
-
Jakub Kicinski authored
When driver app matching loaded FW is not found users are faced with: nfp: failed to find app with ID 0x%02x This message does not properly explain that matching driver code is either not built into the driver or the driver is too old. Signed-off-by:
-
Jakub Kicinski authored
Representors are grouped in sets by type. Currently the whole sets are under RCU protection, but individual representor pointers are not. This causes some inconveniences when representors have to be destroyed, because we have to allocate new sets to remove any representors. Protect the individual pointers with RCU. Signed-off-by:
-
Jakub Kicinski authored
The write side of repr tables is always done under pf->lock. Add a helper to dereference repr table pointers under protection of that lock. Signed-off-by:
-
Jakub Kicinski authored
Devlink used to have two global locks: devlink lock and port lock, our lock ordering looked like this: devlink lock -> driver's pf->lock -> devlink port lock After recent changes port lock was replaced with per-instance lock. Unfortunately, new per-instance lock is taken on most operations now. This means we can only grab the pf->lock from the port split/unsplit ops. Lock ordering looks like this: devlink lock -> driver's pf->lock -> devlink instance lock Since we can't take pf->lock from most devlink ops, make sure nfp_apps are prepared to service them as soon as devlink is registered. Locking the pf must be pushed down after nfp_app_init() callback. The init order looks like this: nfp_app_init devlink_register nfp_app_start netdev/port_register As soon as app_init is done nfp_apps must be ready to service devlink-related callbacks. apps can only register their own devlink objects from nfp_app_start. Fixes: 2406e7e5 ("devlink: Add per devlink instance lock") Signed-off-by:
-
Jakub Kicinski authored
NFP app is currently shut down as soon as all the vNICs are gone. This means we can't depend on the app existing throughout the lifetime of the device. Free the app only from PCI remove path. Signed-off-by:
-
Jakub Kicinski authored
Currently the helpers for accessing 4 or 8 byte values over the CPP bus return the length of IO on success. If the IO was short caller has to deal with error handling. The short IO for 4/8B values is completely impractical. Make the helpers return an error if full access was not possible. Fix the few places which are actually dealing with errors correctly, most call sites already only deal with negative return codes. Signed-off-by:
-
David S. Miller authored
Yuchung Cheng says: ==================== tcp: do not use RTT from delayed ACKs for min-RTT This patch set prevents TCP sender from using RTT samples from (suspected) delayed ACKs as the minimum RTT, to avoid unbounded over-estimation of the network path delay. This issue is common when a connection has extended periods of one packet chit-chat beyond the min RTT filter window. The first patch does that for TCP general min RTT estimation. The second patch addresses specifically the BBR congestion control's min RTT filter. ==================== Signed-off-by: -
Yuchung Cheng authored
A persistent connection may send tiny amount of data (e.g. health-check) for a long period of time. BBR's windowed min RTT filter may only see RTT samples from delayed ACKs causing BBR to grossly over-estimate the path delay depending how much the ACK was delayed at the receiver. This patch skips RTT samples that are likely coming from delayed ACKs. Note that it is possible the sender never obtains a valid measure to set the min RTT. In this case BBR will continue to set cwnd to initial window which seems fine because the connection is thin stream. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
-
Yuchung Cheng authored
This patch avoids having TCP sender or congestion control overestimate the min RTT by orders of magnitude. This happens when all the samples in the windowed filter are one-packet transfer like small request and health-check like chit-chat, which is farily common for applications using persistent connections. This patch tries to conservatively labels and skip RTT samples obtained from this type of workload. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jon Maloy authored
Letting tipc_poll() dereference a socket's pointer to struct tipc_group entails a race risk, as the group item may be deleted in a concurrent tipc_sk_join() or tipc_sk_leave() thread. We now move the 'open' flag in struct tipc_group to struct tipc_sock, and let the former retain only a pointer to the moved field. This will eliminate the race risk. Reported-by: syzbot+799dafde0286795858ac@syzkaller.appspotmail.com Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Lorenzo Bianconi authored
Remove the switch block in l2tp_nl_cmd_session_create() that checks pseudowire-specific parameters since just L2TP_PWTYPE_ETH and L2TP_PWTYPE_PPP are currently supported and no actual checks are performed. Moreover the L2TP_PWTYPE_IP/default case presents a harmless issue in error handling (break instead of goto out_tunnel) Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Ganesh Goudar authored
on T6, IPv6 filter would occupy 2 tids instead of 4. Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== l2tp: set l2specific_len based on l2specific_type Do not rely on l2specific_len value provided by userspace but set sublayer length according to l2specific_type. Mark L2TP_ATTR_L2SPEC_LEN attribute as not used Changes since v2: - drop the patch related to a fix in the switch default case in l2tp_nl_cmd_session_create() - use L2SPECTYPE_NONE as default case in l2tp_get_l2specific_len() Changes since v1: - remove l2specific_len parameter - add sanity check on l2specific_type provided by userspace ==================== Signed-off-by: -
Lorenzo Bianconi authored
Reviewed-by:
-
Lorenzo Bianconi authored
Remove l2specific_len configuration parameter since now L2-Specific Sublayer length is computed according to l2specific_type provided by userspace. Reviewed-by:
-
Lorenzo Bianconi authored
Remove l2specific_len dependency while building l2tpv3 header or parsing the received frame since default L2-Specific Sublayer is always four bytes long and we don't need to rely on a user supplied value. Moreover in l2tp netlink code there are no sanity checks to enforce the relation between l2specific_len and l2specific_type, so sending a malformed netlink message is possible to set l2specific_type to L2TP_L2SPECTYPE_DEFAULT (or even L2TP_L2SPECTYPE_NONE) and set l2specific_len to a value greater than 4 leaking memory on the wire and sending corrupted frames. Reviewed-by:
-
Lorenzo Bianconi authored
Add sanity check on l2specific_type provided by userspace in l2tp_nl_cmd_session_create() since just L2TP_L2SPECTYPE_DEFAULT and L2TP_L2SPECTYPE_NONE are currently supported. Moreover explicitly set l2specific_type to L2TP_L2SPECTYPE_DEFAULT only if the userspace does not provide a value for it Reviewed-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: reduce memory footprint for collecting firmware dump Firmware dump can be large (upto 2 GB). In low memory conditions, ethtool fails to allocate such large memory. So, use zlib deflate to compress collected firmware dump. Patch 1 updates collection logic to use compression. Patch 2 adds zlib deflate to compress collected firmware dump. ==================== Signed-off-by: -
Rahul Lakkireddy authored
Use zlib deflate to compress firmware dump. Collect and compress as much firmware dump as possible into a 32 MB buffer. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
Update firmware dump collection logic to use compression when available. Let collection logic attempt to do compression, instead of returning out of memory early. Signed-off-by:
-
Talat Batheesh authored
Helmut reported a bug about devision by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is devision by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2f ("net/mlx5e: Added BW check for DIM decision mechanism") Fixes: 4c4dbb4a ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Reported-by:
Helmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Signed-off-by:
Tal Gilboa <talgi@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: net/core/devlink.c:2297:25: warning: symbol 'devlink_resource_find' was not declared. Should it be static? net/core/devlink.c:2322:6: warning: symbol 'devlink_resource_validate_children' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.c:289:5: warning: symbol 'mlxsw_sp_kvdl_part_occ' was not declared. Should it be static? Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
-
Zhu Yanjun authored
The variable miistat is not used. So it is removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Eric Dumazet authored
Since commit 41033f02 ("snmp: Remove duplicate OUTMCAST stat increment") one line of code became unneeded. Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_KASAN is set, we can use relatively large amounts of kernel stack space: net/caif/cfctrl.c:555:1: warning: the frame size of 1600 bytes is larger than 1280 bytes [-Wframe-larger-than=] This adds convenience wrappers around cfpkt_extr_head(), which is responsible for most of the stack growth. With those wrapper functions, gcc apparently starts reusing the stack slots for each instance, thus avoiding the problem. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.16-20180119' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2018-01-16 this is a pull request for net-next/master consisting of 1 patch. This patch by Arnd Bergmann for the m_can driver silences a compiler warning if CONFIG_PM is not selected. ==================== Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 Final few patches before the merge window, nothing really special. ath9k * add MSI support (not enabled by default yet) rtlwifi * support A-MSDU in A-MPDU aggregation ==================== Signed-off-by:
-
Arnd Bergmann authored
Building without CONFIG_PM results in a harmless warning: drivers/net/can/m_can/m_can.c:1763:12: error: 'm_can_runtime_resume' defined but not used [-Werror=unused-function] drivers/net/can/m_can/m_can.c:1752:12: error: 'm_can_runtime_suspend' defined but not used [-Werror=unused-function] Marking the functions as __maybe_unused lets the compiler silently drop them instead. Fixes: cdf8259d ("can: m_can: Add PM Support") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Andrew Morton authored
gcc-4.4.4 has problems witn anon union initializers. Work around this. net/sched/sch_prio.c: In function 'prio_dump_offload': net/sched/sch_prio.c:260: error: unknown field 'stats' specified in initializer net/sched/sch_prio.c:260: warning: initialization makes integer from pointer without a cast net/sched/sch_prio.c:261: error: unknown field 'stats' specified in initializer net/sched/sch_prio.c:261: warning: initialization makes integer from pointer without a cast Fixes: 7fdb61b4 ("net: sch: prio: Add offload ability to PRIO qdisc") Cc: Nogah Frankel <nogahf@mellanox.com> Cc: Yuval Mintz <yuvalm@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 18 Jan, 2018 5 commits
-
-
Christopher Díaz Riveros authored
Trivial fix removes unneeded semicolons after if blocks. This issue was detected by using the Coccinelle software. Signed-off-by:
Christopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by:
-
Luis de Bethencourt authored
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by:
Luis de Bethencourt <luisbg@kernel.org> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
When tcm->tcm_ifindex == TCM_IFINDEX_MAGIC_BLOCK, parent is still passed down but the value is never used. Compiler does not recognize it and issues a warning. Silence it down initializing parent to 0. Fixes: 7960d1da ("net: sched: use block index as a handle instead of qdisc when block is shared") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ping-Ke Shih authored
Due to the fact that A-MSDU deaggregation is done in software, we set this flag to support the A-MSDU in A-MPDU Signed-off-by:
Steven Ting <steventing@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Maya Erez authored
wil6210 maintainer email and mail list has changed, hence update its MAINTAINERS entry accordingly. Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
