- 16 Oct, 2009 12 commits
-
-
Paul Mundt authored
Conflicts: arch/sh/Kconfig
-
Paul Mundt authored
This seems to have popped back in via some merge damage. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This enables SCHED_MC support for SH-X3 multi-cores. Presently this is just a simple wrapper around the possible map, but this allows for tying in support for some of the more exotic NUMA clusters where we can actually do something with the topology. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
In the case where need_resched() is set in between the cpu_idle() and pm_idle() calls we were missing an else case for just re-enabling local IRQs and bailing out. This was noticed by the irqs_disabled() warning, even though IRQs were being re-enabled elsewhere. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This follows the x86 change and moves check_pgt_cache() up under the !need_resched() tight loop, rather than simply calling in to it when exiting idle. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This does a bit of chainsawing of the idle loop code to get light sleep working on SMP. Previously this was forcing secondary CPUs in to sleep mode with them not coming back if they didn't have their own local timers. Given that we use clockevents broadcasting by default, the CPU managing the clockevents can't have IRQs disabled before entering its sleep state. This unfortunately leaves us with the age-old need_resched() race in between local_irq_enable() and cpu_sleep(), but at present this is unavoidable. After some more experimentation it may be possible to layer on SR.BL bit manipulation over top of this scheme to inhibit the race condition, but given the current potential for missing wakeups, this is left as a future exercise. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
All of the secondary CPUs are forced in to light sleep mode, but we were missing the same initialization for the boot CPU. This resulted in inconsistent sleep modes depending on which CPU we were on, confusing the idle loop when not polling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Conflicts: arch/sh/mm/cache-sh4.c
-
Thomas Gleixner authored
The open function got the BKL via the big push down. Replace it by preempt_enable/disable as this is sufficient for an UP machine. The ioctl can be unlocked because there is no functionality which requires serialization. The usage by multiple callers is broken with and without the BKL due to the local static variable addr. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Magnus Damm authored
Add code to handle the cache disabled case. Fixes breakage introduced by 37443ef3 ("sh: Migrate SH-4 cacheflush ops to function pointers."). Without this patch configuring caches off with CONFIG_CACHE_OFF=y makes kfr2r09 and migo-r lock up in fbdev deferred io or early user space. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Valentin Sitdikov authored
Presently The SH-4 cache flushing code uses flush_cache_4096() for most of the real flushing work, which breaks down to a fixed 4096 unroll and increment. Not only is this sub-optimal for larger page sizes, it's also uncovered a bug in sh4_flush_dcache_page() when large page sizes are used and we have no cache aliases -- resulting in only a part of the page's D-cache lines being written back. Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Linus Torvalds authored
-
- 15 Oct, 2009 23 commits
-
-
git://git.lwn.net/linux-2.6Linus Torvalds authored
* 'docs-next' of git://git.lwn.net/linux-2.6: Update flex_arrays.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: fix socket fd translation dlm: fix lowcomms_connect_node for sctp
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "x86: linker script syntax nits" x86, perf_event: Rename 'performance counter interrupt'
-
David Howells authored
The destination keyring specified to request_key() and co. is made available to the process that instantiates the key (the slave process started by /sbin/request-key typically). This is passed in the request_key_auth struct as the dest_keyring member. keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring() to get the keyring to attach the newly constructed key to at the end of instantiation. This may be given a specific keyring into which a link will be made later, or it may be asked to find the keyring passed to request_key(). In the former case, it returns a keyring with the refcount incremented by lookup_user_key(); in the latter case, it returns the keyring from the request_key_auth struct - and does _not_ increment the refcount. The latter case will eventually result in an oops when the keyring prematurely runs out of references and gets destroyed. The effect may take some time to show up as the key is destroyed lazily. To fix this, the keyring returned by get_instantiation_keyring() must always have its refcount incremented, no matter where it comes from. This can be tested by setting /etc/request-key.conf to: #OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ... #====== ======= =============== =============== =============================== create * test:* * |/bin/false %u %g %d %{user:_display} negate * * * /bin/keyctl negate %k 10 @u and then doing: keyctl add user _display aaaaaaaa @u while keyctl request2 user test:x test:x @u && keyctl list @u; do keyctl request2 user test:x test:x @u; sleep 31; keyctl list @u; done which will oops eventually. Changing the negate line to have @u rather than %S at the end is important as that forces the latter case by passing a special keyring ID rather than an actual keyring ID. Reported-by: Alexander Zangerl <az@bond.edu.au> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Fix MODPOST warning powerpc/oprofile: Add ppc750 CL as supported by oprofile powerpc: warning: allocated section `.data_nosave' not in segment powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'" powerpc: Fix hypervisor TLB batching powerpc/mm: Fix hang accessing top of vmalloc space powerpc: Fix memory leak in axon_msi.c powerpc/pmac: Fix issues with sleep on some powerbooks powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler powerpc/ftrace: show real return addresses in modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI button: don't try to use a non-existent lid device ACPI: video: Loosen strictness of video bus detection code eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated eeepc-laptop: Properly annote eeepc_enable_camera(). ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2) fujitsu-laptop: address missed led-class ifdef fixup ACPI: Kconfig, fix proc aggregator text ACPI: add AC/DC notifier
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2xxx clock: set up clockdomain pointer in struct clk OMAP: Fix race condition with autodeps omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop omap: Initialization of SDRC params on Zoom2 omap: RX-51: Drop I2C-1 speed to 2200 omap: SDMA: Fixing bug in omap_dma_set_global_params() omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: always pin metadata in discard mode Btrfs: enable discard support Btrfs: add -o discard option Btrfs: properly wait log writers during log sync Btrfs: fix possible ENOSPC problems with truncate Btrfs: fix btrfs acl #ifdef checks Btrfs: streamline tree-log btree block writeout Btrfs: avoid tree log commit when there are no changes Btrfs: only write one super copy during fsync
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix vt_compat_ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: Allow sysfs_notify_dirent to be called from interrupt context. sysfs: Allow sysfs_move_dir(..., NULL) again.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: gadget: Fix EEM driver comments and VID/PID usb-storage: Workaround devices with bogus sense size USB: ehci: Fix IST boundary checking interval math. USB: option: Support for AIRPLUS MCD650 Datacard USB: whci-hcd: always do an update after processing a halted qTD USB: whci-hcd: handle early deletion of endpoints USB: wusb: don't use the stack to read security descriptor USB: rename Documentation/ABI/.../sysfs-class-usb_host
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: rt2860sta: prevent a panic when disabling when associated staging: more sched.h fixes Staging: et131x: Fix the add_10bit macro Staging: et131x: Correct WRAP bit handling staging: Complete sched.h removal from interrupt.h Staging: vme: fix sched.h build breakage Staging: poch: fix sched.h build breakage Staging: b3dfg: fix sched.h build breakage Staging: comedi: fix sched.h build breakage Staging: iio: Fix missing include <linux/sched.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits) vmxnet: fix 2 build problems net: add support for STMicroelectronics Ethernet controllers. net: ks8851_mll uses mii interfaces net/fec_mpc52xx: Fix kernel panic on FEC error net: Fix OF platform drivers coldplug/hotplug when compiled as modules TI DaVinci EMAC: Clear statistics register properly. r8169: partial support and phy init for the 8168d irda/sa1100_ir: check return value of startup hook udp: Fix udp_poll() and ioctl() WAN: fix Cisco HDLC handshaking. tcp: fix tcp_defer_accept to consider the timeout 3c574_cs: spin_lock the set_multicast_list function net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs netxen: fix pci bar mapping ethoc: fix warning from 32bit build libertas: fix build net: VMware virtual Ethernet NIC driver: vmxnet3 net: Fix IXP 2000 network driver building. libertas: fix build mac80211: document ieee80211_rx() context requirement ...
-
Linus Torvalds authored
* branch 'tty-fixes' tty: use the new 'flush_delayed_work()' helper to do ldisc flush workqueue: add 'flush_delayed_work()' to run and wait for delayed work tty: Make flush_to_ldisc() locking more robust
-
Jonathan Corbet authored
The 2.6.32 merge window brought a number of changes to the flexible array API; this patch updates the documentation to match the new state of affairs. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
Ingo Molnar authored
This reverts commit e9a63a4e. This breaks older binutils, where sink-less asserts are broken. See this commit for further details: d2ba8b21: x86: Fix assert syntax in vmlinux.lds.S Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4AD6523D.5030909@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: pull in latest, to be able to revert a patch there. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
-
Randy Dunlap authored
vmxnet3 uses in_dev* interfaces so it should depend on INET. Also fix so that the driver builds when CONFIG_PCI_MSI is disabled. vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy' drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
-
- 14 Oct, 2009 5 commits
-
-
-
Andreas Schwab authored
Call compat_unimap_ioctl, not do_unimap_ioctl. This was broken by commit e9216651. The compat_unimap_ioctl was originally called do_unimap_ioctl in fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c. In that patch, the caller was not updated and consequently called the native handler. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Walmsley authored
clock24xx.c is missing a omap2_init_clk_clkdm() in its omap2_clk_init() function. Among other bad effects, this causes the OMAP hwmod layer to oops on boot. Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano Panella <Stefano.Panella@csr.com> for reporting this bug. Thanks to Tony Lindgren <tony@atomide.com> for N800 booting advice. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Carlos Aguiar <carlos.aguiar@indt.org.br> Cc: Stefano Panella <Stefano.Panella@csr.com> Cc: Tony Lindgren <tony@atomide.com>
-
Kalle Jokiniemi authored
There is a possible race condition in clockdomain code handling hw supported idle transitions. When multiple autodeps dependencies are being added or removed, a transition of still remaining dependent powerdomain can result in false readings of the state counter. This is especially fatal for off mode state counter, as it could result in a driver not noticing a context loss. Fixed by disabling hw supported state transitions when autodeps are being changed. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
-