- 20 Aug, 2016 40 commits
-
-
Mario Kleiner authored
commit e10aec65 upstream. Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e0 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit 396f5d62 upstream. This effectively reverts commit afcd950c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jun 10 15:58:01 2015 +0100 drm: Avoid the double clflush on the last cache line in drm_clflush_virt_range() as we have observed issues with serialisation of the clflush operations on Baytrail+ Atoms with partial updates. Applying the double flush on the last cacheline forces that clflush to be ordered with respect to the previous clflush, and the mfence then protects against prefetches crossing the clflush boundary. The same issue can be demonstrated in userspace with igt/gem_exec_flush. Fixes: afcd950c (drm: Avoid the double clflush on the last cache...) Testcase: igt/gem_concurrent_blit Testcase: igt/gem_partial_pread_pwrite Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92845Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Akash Goel <akash.goel@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason.ekstrand@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1467880930-23082-6-git-send-email-chris@chris-wilson.co.ukSigned-off-by:
-
Mikulas Patocka authored
commit 28668f43 upstream. The patch f045f459 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") tries to fix some out of memory accesses. Unfortunatelly, the patch breaks the display when using fonts with width that is not divisiable by 8. The monochrome bitmap for each character is stored in memory by lines from top to bottom. Each line is padded to a full byte. For example, for 22x11 font, each line is padded to 16 bits, so each character is consuming 44 bytes total, that is 11 32-bit words. The patch f045f459 changed the logic to "dsize = ALIGN(image->width * image->height, 32) >> 5", that is just 8 words - this is incorrect and it causes display corruption. This patch adds the necesary padding of lines to 8 bytes. This patch should be backported to stable kernels where f045f459 was backported. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: f045f459 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit d0e62ef6 upstream. This should fix some unaligned access warnings. This is also likely to fix non-descript issues on nv30/nv34 as a result of incorrect channel setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96836Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Ben Skeggs authored
commit 0e67bed2 upstream. Signed-off-by:
-
Alex Deucher authored
commit d3200be6 upstream. Same interface as other UNIPHY blocks Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 3edc38a0 upstream. Some of the checks didn't handle frev 2 tables properly. Signed-off-by:
-
Lyude authored
commit 14ff8d48 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with a radeon GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, radeon_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d814b24f upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 7f555c8e upstream. Looks like this got missed when we ported the code from radeon. Reviewed-by:
Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by:
-
Alex Deucher authored
commit a8a04c99 upstream. Some of the checks didn't handle frev 2 tables properly. amdgpu doesn't support any tables pre-frev 2, so drop the checks. Signed-off-by:
-
Lyude authored
commit 23a1a9e5 upstream. Just about all of amdgpu's connector probing functions try to acquire runtime PM refs. If we try to do this in the context of amdgpu_resume_kms by calling drm_helper_hpd_irq_event(), we end up deadlocking the system. Since we're guaranteed to be holding the spinlock for RPM in amdgpu_resume_kms, and we already know the GPU is in working order, we need to prevent the RPM helpers from trying to run during the initial connector reprobe on resume. There's a couple of solutions I've explored for fixing this, but this one by far seems to be the simplest and most reliable (plus I'm pretty sure that's what disable_depth is there for anyway). Reproduction recipe: - Get any laptop dual GPUs using PRIME - Make sure runtime PM is enabled for amdgpu - Boot the machine - If the machine managed to boot without hanging, switch out of X to another VT. This should definitely cause X to hang infinitely. Changes since v1: - add appropriate #ifdef checks for CONFIG_PM. This is not very useful, but it appears some kernel test suites test compiling amdgpu with CONFIG_PM disabled, which results in this patch breaking the builds if we don't include this #ifdef Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
-
Alex Deucher authored
commit dba6c4fa upstream. Same interface as other UNIPHY blocks Signed-off-by:
-
Lyude authored
commit b636a1b3 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with an AMD GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, amdgpu_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by:
-
Alex Deucher authored
commit f81eb1a3 upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by:
-
H. Nikolaus Schaller authored
commit ecfaf0c4 upstream. Commit e93762bb ("w1: masters: omap_hdq: add support for 1-wire mode") added a statement to clear the hdq_irqstatus flags in hdq_read_byte(). If the hdq reading process is scheduled slowly or interrupts are disabled for a while the hardware read activity might already be finished on entry of hdq_read_byte(). And hdq_isr() already has set the hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel. This means there is no need to wait and the hdq_read_byte() can just read the byte from the hdq controller. By resetting hdq_irqstatus to 0 the read process is forced to be always waiting again (because the if statement always succeeds) but the hardware will not issue another RXCOMPLETE interrupt. This results in a false timeout. After such a situation the hdq bus hangs. Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.comSigned-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paul Moore authored
commit 0e0e3677 upstream. It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Reported-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Hans de Goede authored
commit fc51b632 upstream. It seems that recent kernels have a shorter timeout when scanning for ethernet phys causing us to hit a timeout on boards where the phy's regulator gets enabled just before scanning, which leads to non working ethernet. A 10ms startup delay seems to be enough to fix it, this commit adds a 20ms startup delay just to be safe. This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board, both of which have non-working ethernet on recent kernels without this fix. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Paul Moore authored
commit 43761473 upstream. There is a double fetch problem in audit_log_single_execve_arg() where we first check the execve(2) argumnets for any "bad" characters which would require hex encoding and then re-fetch the arguments for logging in the audit record[1]. Of course this leaves a window of opportunity for an unsavory application to munge with the data. This patch reworks things by only fetching the argument data once[2] into a buffer where it is scanned and logged into the audit records(s). In addition to fixing the double fetch, this patch improves on the original code in a few other ways: better handling of large arguments which require encoding, stricter record length checking, and some performance improvements (completely unverified, but we got rid of some strlen() calls, that's got to be a good thing). As part of the development of this patch, I've also created a basic regression test for the audit-testsuite, the test can be tracked on GitHub at the following link: * https://github.com/linux-audit/audit-testsuite/issues/25 [1] If you pay careful attention, there is actually a triple fetch problem due to a strnlen_user() call at the top of the function. [2] This is a tiny white lie, we do make a call to strnlen_user() prior to fetching the argument data. I don't like it, but due to the way the audit record is structured we really have no choice unless we copy the entire argument at once (which would require a rather wasteful allocation). The good news is that with this patch the kernel no longer relies on this strnlen_user() value for anything beyond recording it in the log, we also update it with a trustworthy value whenever possible. Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Signed-off-by:
-
Joerg Roedel authored
commit 3254de6b upstream. Not doing so might cause IO-Page-Faults when a device uses an alias request-id and the alias-dte is left in a lower page-mode which does not cover the address allocated from the iova-allocator. Fixes: 492667da ('x86/amd-iommu: Remove amd_iommu_pd_table') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Joerg Roedel authored
commit b548e786 upstream. The default domain for a device might also be identity-mapped. In this case the kernel would crash when unity mappings are defined for the device. Fix that by making sure the domain is a dma_ops domain. Fixes: 0bb6e243 ('iommu/amd: Support IOMMU_DOMAIN_DMA type allocation') Signed-off-by:
-
Joerg Roedel authored
commit cda7005b upstream. This domain type is not yet handled in the iommu_ops->domain_free() call-back. Fix that. Fixes: 0bb6e243 ('iommu/amd: Support IOMMU_DOMAIN_DMA type allocation') Signed-off-by:
-
Wei Yang authored
commit 5c365d18 upstream. In 'commit <55d94043> ("iommu/vt-d: Get rid of domain->iommu_lock")', the error handling path is changed a little, which makes the function always return 0. This path fixes this. Signed-off-by:
Wei Yang <richard.weiyang@gmail.com> Fixes: 55d94043 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by:
-
Marek Szyprowski authored
commit b54b874f upstream. Removal of IOMMU driver cannot be done reliably, so Exynos IOMMU driver doesn't support this operation. It is essential for system operation, so it makes sense to prevent unbinding by disabling bind/unbind sysfs feature for SYSMMU controller driver to avoid kernel ops or trashing memory caused by such operation. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Daniel Vetter authored
commit 78c3d5fa upstream. Another CI fail we have for no reason. Totally unjustified since nothing fails at all. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1445590806-23886-1-git-send-email-daniel.vetter@ffwll.chAcked-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jeff Layton authored
commit dd257933 upstream. nfsd4_lock will take the st_mutex before working with the stateid it gets, but between the time when we drop the cl_lock and take the mutex, the stateid could become unhashed (a'la FREE_STATEID). If that happens the lock stateid returned to the client will be forgotten. Fix this by first moving the st_mutex acquisition into lookup_or_create_lock_state. Then, have it check to see if the lock stateid is still hashed after taking the mutex. If it's not, then put the stateid and try the find/create again. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Tested-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Chuck Lever authored
commit 42691398 upstream. When running LTP's nfslock01 test, the Linux client can send a LOCK and a FREE_STATEID request at the same time. The outcome is: Frame 324 R OPEN stateid [2,O] Frame 115004 C LOCK lockowner_is_new stateid [2,O] offset 672000 len 64 Frame 115008 R LOCK stateid [1,L] Frame 115012 C WRITE stateid [0,L] offset 672000 len 64 Frame 115016 R WRITE NFS4_OK Frame 115019 C LOCKU stateid [1,L] offset 672000 len 64 Frame 115022 R LOCKU NFS4_OK Frame 115025 C FREE_STATEID stateid [2,L] Frame 115026 C LOCK lockowner_is_new stateid [2,O] offset 672128 len 64 Frame 115029 R FREE_STATEID NFS4_OK Frame 115030 R LOCK stateid [3,L] Frame 115034 C WRITE stateid [0,L] offset 672128 len 64 Frame 115038 R WRITE NFS4ERR_BAD_STATEID In other words, the server returns stateid L in a successful LOCK reply, but it has already released it. Subsequent uses of stateid L fail. To address this, protect the generation check in nfsd4_free_stateid with the st_mutex. This should guarantee that only one of two outcomes occurs: either LOCK returns a fresh valid stateid, or FREE_STATEID returns NFS4ERR_LOCKS_HELD. Reported-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
-
Benjamin Coddington authored
commit 149a4fdd upstream. NFS doesn't expect requests with wb_bytes set to zero and may make unexpected decisions about how to handle that request at the page IO layer. Skip request creation if we won't have any wb_bytes in the request. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
James Hogan authored
commit 9b731bcf upstream. Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal error since they normally indicate the guest accessed bad physical memory or the commpage in an unexpected way. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [james.hogan@imgtec.com: Backport to v3.17.y - v4.4.y] Signed-off-by:
-
James Hogan authored
commit 0741f52d upstream. Two consecutive gfns are loaded into host TLB, so ensure the range check isn't off by one if guest_pmap_npages is odd. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
James Hogan authored
commit 8985d503 upstream. kvm_mips_handle_mapped_seg_tlb_fault() calculates the guest frame number based on the guest TLB EntryLo values, however it is not range checked to ensure it lies within the guest_pmap. If the physical memory the guest refers to is out of range then dump the guest TLB and emit an internal error. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
James Hogan authored
commit c604cffa upstream. kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at virtual address 0 to PFN 0 if the guest has created its own mapping there. The intention is unclear, but it may have been an attempt to protect the zero page from being mapped to anything but the comm page in code paths you wouldn't expect from genuine commpage accesses (guest kernel mode cache instructions on that address, hitting trapping instructions when executing from that address with a coincidental TLB eviction during the KVM handling, and guest user mode accesses to that address). Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it may not be at address 0 since commit 42aa12e7 ("MIPS: KVM: Move commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be interpreted as 0 (invalid). Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
Stephan Mueller authored
commit 4b44f2d1 upstream. The Hyper-V Linux Integration Services use the VMBus implementation for communication with the Hypervisor. VMBus registers its own interrupt handler that completely bypasses the common Linux interrupt handling. This implies that the interrupt entropy collector is not triggered. This patch adds the interrupt entropy collection callback into the VMBus interrupt handler function. Signed-off-by:
Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 9b4d0087 upstream. Since systemd is consistently using /dev/urandom before it is initialized, we can't see the other potentially dangerous users of /dev/urandom immediately after boot. So print the first ten such complaints instead. Signed-off-by:
-
Theodore Ts'o authored
commit 3371f3da upstream. If we have a hardware RNG and are using the in-kernel rngd, we should use this to initialize the non-blocking pool so that getrandom(2) doesn't block unnecessarily. Signed-off-by:
-
Pavel Shilovsky authored
commit 7893242e upstream. During following a symbolic link we received err_buf from SMB2_open(). While the validity of SMB2 error response is checked previously in smb2_check_message() a symbolic link payload is not checked at all. Fix it by adding such checks. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Rabin Vincent authored
commit bd975d1e upstream. The secmech hmac(md5) structures are present in the TCP_Server_Info struct and can be shared among multiple CIFS sessions. However, the server mutex is not currently held when these structures are allocated and used, which can lead to a kernel crashes, as in the scenario below: mount.cifs(8) #1 mount.cifs(8) #2 Is secmech.sdeschmaccmd5 allocated? // false Is secmech.sdeschmaccmd5 allocated? // false secmech.hmacmd = crypto_alloc_shash.. secmech.sdeschmaccmd5 = kzalloc.. sdeschmaccmd5->shash.tfm = &secmec.hmacmd; secmech.sdeschmaccmd5 = kzalloc // sdeschmaccmd5->shash.tfm // not yet assigned crypto_shash_update() deref NULL sdeschmaccmd5->shash.tfm Unable to handle kernel paging request at virtual address 00000030 epc : 8027ba34 crypto_shash_update+0x38/0x158 ra : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84 Call Trace: crypto_shash_update+0x38/0x158 setup_ntlmv2_rsp+0x4bc/0xa84 build_ntlmssp_auth_blob+0xbc/0x34c sess_auth_rawntlmssp_authenticate+0xac/0x248 CIFS_SessSetup+0xf0/0x178 cifs_setup_session+0x4c/0x84 cifs_get_smb_ses+0x2c8/0x314 cifs_mount+0x38c/0x76c cifs_do_mount+0x98/0x440 mount_fs+0x20/0xc0 vfs_kern_mount+0x58/0x138 do_mount+0x1e8/0xccc SyS_mount+0x88/0xd4 syscall_common+0x30/0x54 Fix this by locking the srv_mutex around the code which uses these hmac(md5) structures. All the other secmech algos already have similar locking. Fixes: 95dc8dd1 ("Limit allocation of crypto mechanisms to dialect which requires") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Acked-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Sachin Prabhu authored
commit 8d9535b6 upstream. When opening a file with O_CREAT flag, check to see if the file opened is an existing directory. This prevents the directory from being opened which subsequently causes a crash when the close function for directories cifs_closedir() is called which frees up the file->private_data memory while the file is still listed on the open file list for the tcon. Signed-off-by:
Xiaoli Feng <xifeng@redhat.com> Signed-off-by:
-
Aurelien Aptel authored
commit a6b5058f upstream. if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but not any of the path components above: - store the /sub/dir/foo prefix in the cifs super_block info - in the superblock, set root dentry to the subpath dentry (instead of the share root) - set a flag in the superblock to remember it - use prefixpath when building path from a dentry fixes bso#8950 Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
-
Arnd Bergmann authored
commit abcfb5d9 upstream. The jbd2 journal stores the commit time in 64-bit seconds and 32-bit nanoseconds, which avoids an overflow in 2038, but it gets the numbers from current_kernel_time(), which uses 'long' seconds on 32-bit architectures. This simply changes the code to call current_kernel_time64() so we use 64-bit seconds consistently. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
