- 16 Jul, 2020 2 commits
-
-
Paul Cercueil authored
By changing the pixel clock and the length of the back porch, it is possible to obtain a perfect 50 Hz refresh rate. v2: Rebase on drm-misc-next Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-2-paul@crapouillou.net
-
Paul Cercueil authored
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC signals, which sorts-of worked, but resulted in the picture fading out under certain circumstances. Fix this issue by marking VSYNC and HSYNC signals active-low. v2: Rebase on drm-misc-next Fixes: 7b6bd843 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel") Cc: stable@vger.kernel.org # v5.5 Signed-off-by:
-
- 15 Jul, 2020 7 commits
-
-
Randy Dunlap authored
Drop doubled word "the" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-7-rdunlap@infradead.org
-
Randy Dunlap authored
Drop the doubled word "to" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words "the" and "be" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "is" in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop the doubled words "the" and "by" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "should" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "than" in a comment. Signed-off-by:
-
- 14 Jul, 2020 9 commits
-
-
Daniel Vetter authored
Exactly matches the one in the helpers. This avoids me having to roll out dma-fence critical section annotations to this copy. Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Link: https://patchwork.freedesktop.org/patch/msgid/20200709123339.547390-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Gives us proper nonblocking support for free, and a pile of other things. The tilcdc code is simply old enough that it was never converted over, but was stuck forever with the copypasta from when it was initially merged. The riskiest thing with this conversion is maybe that there's an issue with the vblank handling or vblank event handling, which will upset the modern commit support in atomic helpers. But from a cursory review drm_crtc_vblank_on/off is called in the right places, and the event handling also seems to exist (albeit with much hand-rolling and probably some races, could perhaps be converted over to drm_crtc_arm_vblank_event without any real loss). Motivated by me not having to hand-roll the dma-fence annotations for this. v2: Clear out crtc_state->event when we're handling the event, to avoid upsetting the helpers (reported by Jyri). v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a bit like conversion to simple display helpers would work out really nice. Tested-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Thomas Zimmermann authored
There's only trivial code left in mga_crtc_{prepare,commit}(). Merge the functions into the simple pipe's enable function. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
The prepare and commit helpers for G200WB devices control the BMC. Rename them accordingly. While at it, also change the passed value's type to struct mga_device and remove some type upcasting. Signed-off-by:
-
Thomas Zimmermann authored
Modifying the <syncrst> field in mgag200_{enable,disable}_display() makes the code more readable. Also clear the <asyncrst> field to enable the display. The other bits in SEQ0 are unused, so no functional changes are made. Signed-off-by: -
Thomas Zimmermann authored
Of the DPMS code, only ON and OFF states are used. Simplify mode setting by moving both into separate functions and removing the rest. The original code busy waited in the middle of updating the screen state in SEQ1. To simplify the procedure, the new code busy waits first and then updates SEQ1 in one chunk. The DPMS code also set the LUT before enabling the screen. The patch moves this code into the simple-display pipe's enable function. v2: * comment on SEQ1 updates in commit message Signed-off-by:
-
Thomas Zimmermann authored
The simple pipe's disable function disables the screen by calling mgag200_disable_screen(). The simple pipe's enable function enables the screen by calling mgag200_enable_display(). During modeset operations the screen is off and remains off. It's only enabled after the modeset has been completed. Therefore remove all code that sets or clears the <scroff> field while in modeset. The related code also modifies the <syncrst> field in SEQ0. For now, keep this code in place. Signed-off-by:
-
Thomas Zimmermann authored
Makes the code slightly more flexible. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
The prepare function write-protects several registers that it doesn't even touch. Removed the related code. The code for unprotecting registers also clears VINT interrupts. Both is now done once during initialization. Signed-off-by:
-
- 13 Jul, 2020 6 commits
-
-
Tom Rix authored
clang static analysis flags this error sil-sii8620.c:184:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'. So initialize ret. Fixes: ce6e153f ("drm/bridge: add Silicon Image SiI8620 driver") Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Christian König authored
Now that TTM is fixed up we can finally stop that nonsense. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Madhav Chauhan <madhav.chauhan@amd.com> Link: https://patchwork.freedesktop.org/patch/375620
-
Christian König authored
Stop touching the backend private pointer alltogether and make sure we never put the same mem twice by. Signed-off-by:
-
Marek Szyprowski authored
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg(). struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry). It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function. To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe. Signed-off-by:Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Marek Szyprowski authored
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg(). struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry). It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function. To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe. Signed-off-by: -
Andrey Lebedev authored
Some pp or gp jobs can be successfully repeated even after they time outs. Introduce lima module parameter to specify number of times a job can hang before being dropped. Signed-off-by:
Andrey Lebedev <andrey@lebedev.lt> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200619075900.3030696-1-andrey.lebedev@gmail.com
-
- 12 Jul, 2020 2 commits
-
-
Melissa Wen authored
This change expands the coverage for the IGT kms_cursor_crc test, where the size varies between 64 and 512 for a square cursor. With this, in addition to the cursor 64x64, this patch enables the test of cursors with sizes: 128x128, 256x256, and 512x512. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd015002 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
- 11 Jul, 2020 1 commit
-
-
Jitao Shi authored
Delay the backlight on to make sure the video stable. Signed-off-by:
Jitao Shi <jitao.shi@mediatek.com> Signed-off-by:
-
- 10 Jul, 2020 13 commits
-
-
Sam Ravnborg authored
Now that dt-extract-example gained support for using root nodes in examples, update the example for the simple-frambuffer binding to use it. This gives us a better example and kill a long standing warning: simple-framebuffer.example.dts:23.16-39.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Note: To get the update dt-extract-example execute: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade v2: - fix spelling of framebuffer (Geert) - drop stdout-path (Rob) Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200704143544.789345-2-sam@ravnborg.org
-
Sam Ravnborg authored
This binding describes a panel with a secondary channel. v3: - Add reg property and unit-address to dsi nodes (Rob) v2: - add check for required properties if link2 is present (Rob) Signed-off-by:
-
Sam Ravnborg authored
v2: - Add missing types (Rob) - Fix example to specify panel@0 (Rob) Signed-off-by:
-
Sam Ravnborg authored
As the binding matches panel-simple-dsi, added the compatible to the panel-simple-dsi list. With this change enable-gpios is now optional. v2: - It is a DSI panel, add it to panel-simple-dsi (Rob) Signed-off-by:
-
Suraj Upadhyay authored
Change logging information from dev_info() to drm_info(). Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
-
Suraj Upadhyay authored
Convert logging errors from dev_err() to drm_err(). Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Liu Ying authored
It doesn't hurt to add the bridge in the global bridge list also for platform specific dw-hdmi drivers which are based on the component framework. This can be achieved by moving the drm_bridge_add() function call from dw_hdmi_probe() to __dw_hdmi_probe(). A counterpart movement for drm_bridge_remove() is also needed then. Moreover, since drm_bridge_add() initializes &bridge->hpd_mutex, this may help those platform specific dw-hdmi drivers(based on the component framework) avoid accessing the uninitialized mutex in drm_bridge_hpd_notify() which is called in dw_hdmi_irq(). Putting drm_bridge_add() in __dw_hdmi_probe() just before it returns successfully should bring no logic change for platforms based on the DRM bridge API, which is a good choice from safety point of view. Also, __dw_hdmi_probe() is renamed to dw_hdmi_probe() since dw_hdmi_probe() does nothing else but calling __dw_hdmi_probe(). Similar renaming applies to the __dw_hdmi_remove()/dw_hdmi_remove() pair. Fixes: ec971aaa ("drm: bridge: dw-hdmi: Make connector creation optional") Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
Liu Ying authored
It's unnecessary to cleanup the i2c adapter and the ddc pointer in the bailout path of __dw_hdmi_probe(), since the adapter is not added and the ddc pointer is not set. Fixes: a23d6265 ("drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function") Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: dri-devel@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Evgeny Novikov authored
If smtcfb_pci_probe() does not detect a valid chip it cleans up everything and returns 0. This can result in various bad things later. The patch sets the error code on the corresponding path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200706155328.8396-1-novikov@ispras.ru
-
Evgeny Novikov authored
fb_probe() can successfully allocate a new frame buffer, but then fail to perform some operations with regulator. In these cases fb_probe() goes to label err_pm_runtime_disable where the frame buffer is not released. The patch makes fb_probe() to go to label err_release_fb on corresponding error handling paths. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Rikard Falkeborn authored
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 25509 7928 64 33501 82dd drivers/video/fbdev/vt8623fb.o After: text data bss dec hex filename 26533 6904 64 33501 82dd drivers/video/fbdev/vt8623fb.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
