As with the previous commit, before a clock can be used it must be prepared
for use. Change from clk_enable() and clk_disable() to the versions of the
calls which also prepare and un-prepare the clocks.

Will fix warnings from the clock code when this is used.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branches 'asoc/fix/rt5640', 'asoc/fix/samsung', 'asoc/fix/tlv320aic23' and 'asoc/fix/warn' into asoc-linus

Merge remote-tracking branches 'asoc/fix/alc5632', 'asoc/fix/cs42l52', 'asoc/fix/cs42xxx8', 'asoc/fix/da732x', 'asoc/fix/davinci', 'asoc/fix/fsl-sai', 'asoc/fix/fsl-ssi' and 'asoc/fix/max98090' into asoc-linus

ASoC: Final updates for v3.15 merge window

A few more updates from last week - use of the tdm_slot mapping from
Xiubo plus a few smaller fixes and cleanups.

# gpg: Signature made Mon 31 Mar 2014 10:49:42 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Updates for v3.15

A few more updates for the merge window:

 - Fixes for the simple-card DAI format DT mess.
 - A new driver for Cirrus cs42xx8 devices.
 - DT support for a couple more devices.
 - A revert of a previous buggy fix for soc-pcm, plus a few more fixes
   and cleanups.

# gpg: Signature made Sun 23 Mar 2014 16:56:11 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Updates for v3.15

This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes).  The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing.  Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.

# gpg: Signature made Thu 13 Mar 2014 14:25:44 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.

# gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

IB_NF, NB_IF and IB_IF configured the bc polarity incorrectly. The receive
polarity was set to the same edge as the TX in these cases.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

PCM and S/PDIF drivers referenced mach headers for a trivial
data structure. This caused build errors on multiplatform builds
as machine headers are not accessible from driver files. Move the data
structure definition to the driver header and remove the dependency.
While at it rename the structure to avoid multiple definition errors
as the same structure is also used by the platform code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

The BCP bit in TCR4/RCR4 register rules as followings:
  0 Bit clock is active high with drive outputs on rising edge
    and sample inputs on falling edge.
  1 Bit clock is active low with drive outputs on falling edge
    and sample inputs on rising edge.

For all formats currently supported in the fsl_sai driver, they're exactly
sending data on the falling edge and sampling on the rising edge.

However, the driver clears this BCP bit for all of them which results click
noise when working with SGTL5000 and big noise with WM8962.

Thus this patch corrects the BCP settings for all the formats here to fix
the nosie issue.
Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Acked-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

DA732X_ID_MAJOR_MASK is 0xF0, so the major id is
(reg & DA732X_ID_MAJOR_MASK) >> 4.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

BIT[0:2] of register 01h is REVID, so the mask for REVID should be 0x7.
Also updates the code to use CS42L52_CHIP_REV_MASK.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Commit 5d6be5aa ("ASoC: codec: Simplify ASoC probe code.") left variable
'ret', whose value is returned, uninitialized. Since it is not used
otherwise, remove it.
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Fix checking return value of regmap_read().
Also fix reporting the chip_id value. CS42XX8_CHIPID_CHIP_ID_MASK is 0xF0,
so the chip_id value is (val & CS42XX8_CHIPID_CHIP_ID_MASK) >> 4).
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Paul Handrigan <paul.handrigan@cirrus.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

A lot of bindings where changed without an update of the binding
documentation. This patch adds those changes to the documentation.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

alc5632_probe() returns ret, yet it is not initialized or set anywhere.
This ends up causing the function to appear to fail, and audio not to
work on the Toshiba AC100, with my compiler at least.

This function used to set ret in all cases, but recent cleanup removed
that.

Fixes: 5d6be5aa ("ASoC: codec: Simplify ASoC probe code.")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Pull vfs fixes from Al Viro:
 "Switch mnt_hash to hlist, turning the races between __lookup_mnt() and
  hash modifications into false negatives from __lookup_mnt() (instead
  of hangs)"

On the false negatives from __lookup_mnt():
 "The *only* thing we care about is not getting stuck in __lookup_mnt().
  If it misses an entry because something in front of it just got moved
  around, etc, we are fine.  We'll notice that mount_lock mismatch and
  that'll be it"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch mnt_hash to hlist
  don't bother with propagate_mnt() unless the target is shared
  keep shadowed vfsmounts together
  resizable namespace.c hashes

I am the new kernel tree Documentation maintainer (except for parts that
are handled by other people, of course).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:
 "Some more updates for the input subsystem.

  You will get a fix for race in mousedev that has been causing quite a
  few oopses lately and a small fixup for force feedback support in
  evdev"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: mousedev - fix race when creating mixed device
  Input: don't modify the id of ioctl-provided ff effect on upload failure

It its possible to configure your PAM stack to refuse login if audit
messages (about the login) were unable to be sent.  This is common in
many distros and thus normal configuration of many containers.  The PAM
modules determine if audit is enabled/disabled in the kernel based on
the return value from sending an audit message on the netlink socket.
If userspace gets back ECONNREFUSED it believes audit is disabled in the
kernel.  If it gets any other error else it refuses to let the login
proceed.

Just about ever since the introduction of namespaces the kernel audit
subsystem has returned EPERM if the task sending a message was not in
the init user or pid namespace.  So many forms of containers have never
worked if audit was enabled in the kernel.

BUT if the container was not in net_init then the kernel network code
would send ECONNREFUSED (instead of the audit code sending EPERM).  Thus
by pure accident/dumb luck/bug if an admin configured the PAM stack to
reject all logins that didn't talk to audit, but then ran the login
untility in the non-init_net namespace, it would work!! Clearly this was
a bug, but it is a bug some people expected.

With the introduction of network namespace support in 3.14-rc1 the two
bugs stopped cancelling each other out.  Now, containers in the
non-init_net namespace refused to let users log in (just like PAM was
configfured!) Obviously some people were not happy that what used to let
users log in, now didn't!

This fix is kinda hacky.  We return ECONNREFUSED for all non-init
relevant namespaces.  That means that not only will the old broken
non-init_net setups continue to work, now the broken non-init_pid or
non-init_user setups will 'work'.  They don't really work, since audit
isn't logging things.  But it's what most users want.

In 3.15 we should have patches to support not only the non-init_net
(3.14) namespace but also the non-init_pid and non-init_user namespace.
So all will be right in the world.  This just opens the doors wide open
on 3.14 and hopefully makes users happy, if not the audit system...
Reported-by: Andre Tomt <andre@tomt.net>
Reported-by: Adam Richter <adam_richter2004@yahoo.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fixes RCU bug - walking through hlist is safe in face of element moves,
since it's self-terminating.  Cyclic lists are not - if we end up jumping
to another hash chain, we'll loop infinitely without ever hitting the
original list head.

[fix for dumb braino folded]

Spotted by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If the dest_mnt is not shared, propagate_mnt() does nothing -
there's no mounts to propagate to and thus no copies to create.
Might as well don't bother calling it in that case.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

preparation to switching mnt_hash to hlist

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* switch allocation to alloc_large_system_hash()
* make sizes overridable by boot parameters (mhash_entries=, mphash_entries=)
* switch mountpoint_hashtable from list_head to hlist_head

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull timer fix from Ingo Molnar:
 "A late breaking fix from John.  (The bug fixed has a hard lockup
  potential, but that was not observed, warnings were)"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Revert to calling clock_was_set_delayed() while in irq context

Pull Ceph fix from Sage Weil:
 "This drops a bad assert that a few users have been hitting but we've
  only recently been able to track down"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: drop an unsafe assertion

We should not be using static variable mousedev_mix in methods that can be
called before that singleton gets assigned. While at it let's add open and
close methods to mousedev structure so that we do not need to test if we
are dealing with multiplexor or normal device and simply call appropriate
method directly.

This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551Reported-by: GiulioDP <depasquale.giulio@gmail.com>
Tested-by: GiulioDP <depasquale.giulio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If a new (id == -1) ff effect was uploaded from userspace,
ff-core.c::input_ff_upload() will have assigned a positive number to the
new effect id.  Currently, evdev.c::evdev_do_ioctl() will save this new id
to userspace, regardless of whether the upload succeeded or not.

On upload failure, this can be confusing because the dev->ff->effects[]
array will not contain an element at the index of that new effect id.

This patch fixes this by leaving the id unchanged after upload fails.

Note: Unfortunately applications should still expect changed effect id for
quite some time.

This has been discussed on:
http://www.mail-archive.com/linux-input@vger.kernel.org/msg08513.html
("ff-core effect id handling in case of a failed effect upload")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Olivier Bonvalet reported having repeated crashes due to a failed
assertion he was hitting in rbd_img_obj_callback():

    Assertion failure in rbd_img_obj_callback() at line 2165:
	rbd_assert(which >= img_request->next_completion);

With a lot of help from Olivier with reproducing the problem
we were able to determine the object and image requests had
already been completed (and often freed) at the point the
assertion failed.

There was a great deal of discussion on the ceph-devel mailing list
about this.  The problem only arose when there were two (or more)
object requests in an image request, and the problem was always
seen when the second request was being completed.

The problem is due to a race in the window between setting the
"done" flag on an object request and checking the image request's
next completion value.  When the first object request completes, it
checks to see if its successor request is marked "done", and if
so, that request is also completed.  In the process, the image
request's next_completion value is updated to reflect that both
the first and second requests are completed.  By the time the
second request is able to check the next_completion value, it
has been set to a value *greater* than its own "which" value,
which caused an assertion to fail.

Fix this problem by skipping over any completion processing
unless the completing object request is the next one expected.
Test only for inequality (not >=), and eliminate the bad
assertion.
Tested-by: Olivier Bonvalet <ob@daevel.fr>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>

Pull networking fixes from David Miller:

 1) We've discovered a common error in several networking drivers, they
    put VLAN offload features into ->vlan_features, which would suggest
    that they support offloading 2 or more levels of VLAN encapsulation.
    Not only do these devices not do that, but we don't have the
    infrastructure yet to handle that at all.

    Fixes from Vlad Yasevich.

 2) Fix tcpdump crash with bridging and vlans, also from Vlad.

 3) Some MAINTAINERS updates for random32 and bonding.

 4) Fix late reseeds of prandom generator, from Sasha Levin.

 5) Bridge doesn't handle stacked vlans properly, fix from Toshiaki
    Makita.

 6) Fix deadlock in openvswitch, from Flavio Leitner.

 7) get_timewait4_sock() doesn't report delay times correctly, fix from
    Eric Dumazet.

 8) Duplicate address detection and addrconf verification need to run in
    contexts where RTNL can be obtained.  Move them to run from a
    workqueue.  From Hannes Frederic Sowa.

 9) Fix route refcount leaking in ip tunnels, from Pravin B Shelar.

10) Don't return -EINTR from non-blocking recvmsg() on AF_UNIX sockets,
    from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
  vlan: Warn the user if lowerdev has bad vlan features.
  veth: Turn off vlan rx acceleration in vlan_features
  ifb: Remove vlan acceleration from vlan_features
  qlge: Do not propaged vlan tag offloads to vlans
  bridge: Fix crash with vlan filtering and tcpdump
  net: Account for all vlan headers in skb_mac_gso_segment
  MAINTAINERS: bonding: change email address
  MAINTAINERS: bonding: change email address
  ipv6: move DAD and addrconf_verify processing to workqueue
  tcp: fix get_timewait4_sock() delay computation on 64bit
  openvswitch: fix a possible deadlock and lockdep warning
  bridge: Fix handling stacked vlan tags
  bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled
  vhost: validate vhost_get_vq_desc return value
  vhost: fix total length when packets are too short
  random32: avoid attempt to late reseed if in the middle of seeding
  random32: assign to network folks in MAINTAINERS
  net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset
  core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
  vlan: Set hard_header_len according to available acceleration
  ...

Vlad Yasevich says:

====================
Audit all drivers for correct vlan_features.

Some drivers set vlan acceleration features in vlan_features.  This causes
issues with Q-in-Q/802.1ad configurations.

Audit all the drivers for correct vlan_features.  Fix broken ones.
Add a warning to vlan code to help catch future offenders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers incorrectly assign vlan acceleration features to
vlan_features thus causing issues for Q-in-Q vlan configurations.
Warn the user of such cases.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For completeness, turn off vlan rx acceleration in vlan_features so
that it doesn't show up on q-in-q setups.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not include vlan acceleration features in vlan_features as that
precludes correct Q-in-Q operation.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>