- 20 Aug, 2015 5 commits
-
-
Jaegeuk Kim authored
We should avoid needless checkpoints when there is no dirty and prefree segment. Reviewed-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
This patch introduces __count_free_nids/try_to_free_nids and registers them in slab shrinker for shrinking under memory pressure. Signed-off-by:
-
Chao Yu authored
In f2fs_delete_entry, if last dirent is remove from the dentry page, we will try to punch that page since it has no valid date in it. But truncate_hole which is used for punching could fail because of no memory or IO error, if that happened, we'd better skip clearing this valid dentry page. Signed-off-by:
-
Chao Yu authored
I volunteer to be a dedicated reviewer of f2fs, add my email address in maintainship entry of f2fs. Signed-off-by:
-
Jaegeuk Kim authored
We should not write node pages when deleting orphan inodes. In order to do that, we can eaisly set POR_DOING flag earlier before entering orphan inode routine. Reviewed-by:
-
- 14 Aug, 2015 3 commits
-
-
Jaegeuk Kim authored
If F2FS_CHECK_FS is turned off, we can get a build warning for unused variable. Signed-off-by: -
Chao Yu authored
In recover_orphan_inode, whenever f2fs_iget fail, we will make kernel panic, but it's not reasonable, because f2fs_iget can fail due to a lot of reasons including out of memory. So we change error handling method as below: a) when finding no entry for the orphan inode, bug_on for catching bugs; b) for other reasons, report it to caller. Signed-off-by:
-
Jaegeuk Kim authored
If there is not enough free segment, we should not assign a new segment explicitly. Otherwise, we can run out of free segment. Reviewed-by:
-
- 11 Aug, 2015 2 commits
-
-
Chao Yu authored
Previously, we use radix tree to index all registered page entries for atomic file, but now we only use radix tree to see whether current page is indexed or not, since the other user of radix tree is gone in commit 042b7816 ("f2fs: remove unnecessary call to invalidate inmemory pages"). So in this patch, we try to use one more efficient way: Introducing a macro ATOMIC_WRITTEN_PAGE, and setting it as page private value to indicate page indexing status. By using this way, we can save memory and lookup time. Signed-off-by:
-
Chao Yu authored
We run ltp testcase with f2fs and obtain a TFAIL in diotest4, the result in detail is as fallow: dio04 <<<test_start>>> tag=dio04 stime=1432278894 cmdline="diotest4" contacts="" analysis=exit <<<test_output>>> diotest4 1 TPASS : Negative Offset diotest4 2 TPASS : removed diotest4 3 TFAIL : diotest4.c:129: write allows odd count.returns 1: Success diotest4 4 TFAIL : diotest4.c:183: Odd count of read and write diotest4 5 TPASS : Read beyond the file size ...... the result of ext4 with same environment: dio04 <<<test_start>>> tag=dio04 stime=1432259643 cmdline="diotest4" contacts="" analysis=exit <<<test_output>>> diotest4 1 TPASS : Negative Offset diotest4 2 TPASS : removed diotest4 3 TPASS : Odd count of read and write diotest4 4 TPASS : Read beyond the file size ...... The reason is that when triggering DIO in f2fs, we will return zero value in ->direct_IO if writer's buffer offset, file offset and transfer size is not alignment to block size of filesystem, resulting in falling back into buffered write instead of returning -EINVAL. This patch fixes that problem by returning correct error number for above case, and removing the judgement condition in check_direct_IO to make sure the verification will be enabled for direct reader too. Besides, Jaegeuk Kim pointed out that there is expectional cases we should always make direct-io falling back into buffered write, such as dio in encrypted file. Signed-off-by:
Yunlei He <heyunlei@huawei.com> [Chao Yu make small change and add detail description in commit message] Signed-off-by:
-
- 10 Aug, 2015 1 commit
-
-
Chao Yu authored
fill_zero can fail due to a lot of reason, but previously we do not handle its return value, so its callers such as punch_hole/f2fs_zero_range may report success, but actually can fail because of error occurs inside fill_zero. This patch fixes to report correct return value of fill_zero. Signed-off-by:
-
- 06 Aug, 2015 2 commits
-
-
Chao Yu authored
When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: -
Fan Li authored
In some cases, we only need the block address when we call f2fs_reserve_block, other fields of struct dnode_of_data aren't necessary. We can try extent cache first for such cases in order to speed up the process. Signed-off-by:
Fan li <fanofcode.li@samsung.com> Signed-off-by:
-
- 05 Aug, 2015 19 commits
-
-
Chao Yu authored
To avoid meeting garbage data in next free node block at the end of warm node chain when doing recovery, we will try to zero out that invalid block. If the device is not support discard, our way for zeroing out block is: grabbing a temporary zeroed page in meta inode, then, issue write request with this page. But, we forget to release that temporary page, so our memory usage will increase without gaining any hit ratio benefit, so it's better to free it for saving memory. Signed-off-by:
-
Chao Yu authored
In following call path, we will pass a locked and referenced ipage pointer to get_new_data_page: - init_inode_metadata - make_empty_dir - get_new_data_page There are two exit paths in get_new_data_page when error occurs: 1) grab_cache_page fails, ipage will not be released; 2) f2fs_reserve_block fails, ipage will be released in callee. So, it's not consistent for error handling in get_new_data_page. For f2fs_reserve_block, it's not very easy to change the rule of error handling, since it's already complicated. Here we deside to choose an easy way to fix this issue: If any error occur in get_new_data_page, we will ensure releasing ipage in this function. The same issue is in f2fs_convert_inline_dir, fix that too. Signed-off-by:
-
Liu Xue authored
Replace BUG_ON with f2fs_bug_on to deal with block and segment validity check failed. Signed-off-by:
Xue Liu <liuxueliu.liu@huawei.com> Signed-off-by:
-
Chao Yu authored
In get_meta_page, we guarantee no failure for the returned page, but sometimes, IO error from device will incur returning an non-updated page. Then, we still use this page as updated one, exception could happen when using this kind of page. So in this condition, we'd better freeze fs by making fs readonly and and stop doing checkpoint. Signed-off-by:
-
Fan Li authored
some backing devices need pages to be stable during writeback. It doesn't matter if the page is completely overwritten or already uptodate, it needs to wait before write. Signed-off-by:
-
Jaegeuk Kim authored
This patch adds to handle error cases in commit_inmem_pages. If an error occurs, it stops to write the pages and return the error right away. Signed-off-by: -
Chao Yu authored
When there is no enough free nids in free nid cache, we will try to readahead FREE_NID_PAGES:4 nat pages into page cache of meta_inode, then, reading nat entries in nat page for adding free nids to free nid cache. But when traversing all nat pages we readaheaded in a circulation, our exit condition is not set right, one more nat page will be scanned without readaheading, resulting worse read performance. This patch fixes to read the correct number nat pages to avoid bad performance. Signed-off-by:
-
Chao Yu authored
If we clear inline data/dentry flag in handle_failed_inode, we will fail to decline the stat count of inline data/dentry in f2fs_evict_inode due to no flag in inode. So remove the wrong clearing. Signed-off-by:
-
Chao Yu authored
In f2fs_ioc_start_{atomic,volatile}_write, if we failed in converting inline data, we will report error to user, but still remain atomic/volatile flag in inode, it will impact further writes for this file. Fix it. Signed-off-by: -
Chao Yu authored
This patch fixes the incorrect range (0, LONG_MAX) which is used in ranged fsync. If we use LONG_MAX as the parameter for indicating the end of file we want to synchronize, in 32-bits architecture machine, these datas after 4GB offset may not be persisted in storage after ->fsync returned. Here, we alter LONG_MAX to LLONG_MAX to fix this issue. Signed-off-by:
-
Chao Yu authored
When flushing comes from background, if there is no dirty page in the mapping of inode, we'd better to skip seeking dirty page from mapping for writebacking. Signed-off-by:
-
Tiezhu Yang authored
The if statement "goto continue_unlock" is exactly the same when each if condition is true that is depended on the value of both "step" and "is_cold_data(page)" are 0 or 1. That means when the value of "step" equals to "is_cold_data(page)", the if condition is true and the if statement "goto continue_unlock" appears only once, so it can be optimized to reduce the duplicated code. Signed-off-by:
Tiezhu Yang <kernelpatch@126.com> Signed-off-by:
-
Chao Yu authored
In handle_failed_inode, there is a potential deadlock which can happen in below call path: - f2fs_create - f2fs_lock_op down_read(cp_rwsem) - f2fs_add_link - __f2fs_add_link - init_inode_metadata - f2fs_init_security failed - truncate_blocks failed - handle_failed_inode - f2fs_truncate - truncate_blocks(..,true) - write_checkpoint - block_operations - f2fs_lock_all down_write(cp_rwsem) - f2fs_lock_op down_read(cp_rwsem) So in this path, we pass parameter to f2fs_truncate to make sure cp_rwsem in truncate_blocks will not be locked again. Signed-off-by: -
Chao Yu authored
In f2fs_do_collapse, region cp_rwsem covered is large, since it will be held until all blocks are left shifted, so if we try to collapse small area at the beginning of large file, checkpoint who want to grab writer's lock of cp_rwsem will be delayed for long time. In order to avoid this condition, altering to lock/unlock cp_rwsem each shift operation. Signed-off-by:
-
Fan Li authored
Add a lookup and a insertion interface for extent tree. The new lookup return the insert position and the prev/next extents closest to the offset we lookup when find no match. The new insertion uses above parameters to improve performance. There are three possible insertions after the lookup in f2fs_update_extent_tree, two of them insert parts of removed extent back to tree, since no merge happens during this process, new insertion skips the merge check in this scanario; the another insertion inserts a new extent to tree, new insertion uses prev/next extent and insert position to insert this extent directly, and save the time of searching down the tree. As long as tree remains unchanged between lookup and insertion, this would work fine. And the new lookup would be useful when add multi-blocks extent support for insertion interface. Signed-off-by:
-
Jaegeuk Kim authored
This patch changes for a caller to handle the page after its bio gets an error. Reviewed-by:
-
Chao Yu authored
Variables for recording extent cache ratio info were updated without protection, this patch tries to alter them to atomic_t type for more accurate stat. Signed-off-by:
-
Chao Yu authored
This patch adds to stat the number of inline xattr inode for showing in debugfs. Signed-off-by:
-
Jaegeuk Kim authored
That encrypted page is used temporarily, so we don't need to mark it accessed. Reviewed-by:
-
- 04 Aug, 2015 8 commits
-
-
Chao Yu authored
If there are gced dirty pages and normal dirty pages in the mapping of one inode, we might writeback them alternately with discontinuous block address, resulting in low performance. This patch introduces f2fs_write_cache_pages with codes copied from write_cache_pages in mm/page-writeback.c. In this function, we refactor flow with two steps: 1) writeback all cold type pages. 2) writeback all non-cold type pages. By using this method, f2fs will writeback dirty pages with the same temperature in bunch mode, it makes writeouted block being with more continuous address, so they can be merged as much as possible in f2fs bio cache, and also it will reduce the chance of submiting small IO from block layer. Test environment: 8g nokia sd card (very old sd card, but it shows better effect when testing with this patch, and with a 32g kingston sd card, I didn't see much more improvement). Test step: 1. touch testfile; 2. truncate -s 512K testfile; 3. write all pages with odd index; 4. trigger gc by ioctl; 5. write all pages with even index; 6. time fsync testfile. before: real 0m0.402s user 0m0.000s sys 0m0.000s after: real 0m0.143s user 0m0.004s sys 0m0.004s Signed-off-by:
-
Chao Yu authored
This patch fixes to return correct error number of ->setxattr, which is reported by xfstest tests/generic/026 as below: generic/026 - output mismatch --- tests/generic/026.out +++ results/generic/026.out.bad @@ -4,6 +4,6 @@ 1 below acl max acl max 1 above acl max -chacl: cannot set access acl on "largeaclfile": Argument list too long +chacl: cannot set access acl on "largeaclfile": Numerical result out of range use 16 aces use 17 aces ... Ran: generic/026 Failures: generic/026 Failed 1 of 1 tests Signed-off-by: -
Chao Yu authored
Previously, since 'commit 4531929e ("f2fs: move grabing orphan pages out of protection region")' was committed, in write_orphan_inodes(), we will grab all meta page in a batch before we use them under spinlock, so that we can avoid large time delay of grabbing meta pages under spinlock. Now, 'commit d6c67a4f ("f2fs: revmove spin_lock for write_orphan_inodes")' remove the spinlock in write_orphan_inodes, so there is no issue we describe above, we'd better recover to move the grab operation to original place for readability. Signed-off-by:
-
Chao Yu authored
With cost-benifit method, background gc will consider old section with fewer valid blocks as candidate victim, these old blocks in section will be treated as cold data, and laterly will be moved into cold segment. But if the gcing page is attached by user through buffered or mmaped write, we should reset the page as non-cold one, because this page may have more opportunity for further updating. So fix to add clearing code for the missed 'mmap' case. Signed-off-by:
-
Chao Yu authored
When background gc is off, the only way to trigger gc is executing a force gc in some operations who wants to grab space in disk. The executing condition is limited: to execute force gc, we should wait for the time when there is almost no more free section for LFS allocation. This seems not reasonable for our user who wants to control triggering gc by himself. This patch introduces F2FS_IOC_GARBAGE_COLLECT interface for triggering garbage collection by using ioctl. It provides our users one more option to trigger gc. Signed-off-by:
-
Chao Yu authored
This patch moves extent cache related code from data.c into extent_cache.c since extent cache is independent feature, and its codes are not relate to others in data.c, it's better for us to maintain them in separated place. There is no functionality change, but several small coding style fixes including: * rename __drop_largest_extent to f2fs_drop_largest_extent for exporting; * rename misspelled word 'untill' to 'until'; * remove unneeded 'return' in the end of f2fs_destroy_extent_tree(). Signed-off-by:
-
Fan Li authored
Since only parts of extents longer than F2FS_MIN_EXTENT_LEN will be kept in extent cache after split, extents already shorter than F2FS_MIN_EXTENT_LEN don't need to try split at all. Signed-off-by:
-
Chao Yu authored
This patch fixes to update page flag (e.g. Uptodate/cold flag) in ->write_begin. Otherwise, page will be non-uptodate when we try to write entire page, and cold data flag in page will not be clean when gced page is being rewritten. Signed-off-by:
-
