- 20 Sep, 2016 32 commits
-
-
David Kershner authored
Move the struct visorbus_type down in the file to get rid of the function prototypes visorbus_uevent and visorbus_match. Reported-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
David Kershner <david.kershner@unisys.com> Reviewed-by:
Tim Sell <Timothy.Sell@unisys.com> Signed-off-by:
-
David Kershner authored
Move the deviceenabled/devicedisabled store functions so that function prototypes can be removed. This caused us to move several of the structures farther down in the file as well. Reported-by:
-
David Kershner authored
Moving the remaining_steps functions allows us to get rid of an unneeded prototype. Reported-by:
-
David Kershner authored
The textid store and show functions were moved to allow us to remove the function prototypes. Reported-by:
-
David Kershner authored
Move the show and store functions for the error DEV_ATTR_RW so that the function prototypes can be removed. Reported-by:
-
David Kershner authored
Remove the unneeded prototype parser_done. Reported-by:
-
David Kershner authored
Remove the unneeded prototype declaration for function controlvm_respond_physdev_changestate. Reported-by:
-
David Kershner authored
The function parser_init_byte_stream needs to be moved lower in the file to avoid extraneous function prototypes. Reported-by:
-
David Kershner authored
Move the boottotool show and store functions so the function prototypes can be removed. Reported-by:
-
David Kershner authored
The toolchain functions show and store needed to be moved so the prototypes were no longer needed. Reported-by:
-
David Kershner authored
Remove the unneeded controlvm_respond_chipset_init prototype by moving the functions controlvm_init_response and controlvm_respond_chipset_init up in the file. Reported-by:
-
David Kershner authored
Remove the unneeded prototype for controlvm_respond. Reported-by:
-
David Kershner authored
The function parahotplug_process_list needs to be moved lower in the file to avoid extraneous function prototypes. Reported-by:
-
David Kershner authored
The function read_controlvm_event needs to be moved lower in the file to avoid extraneous function prototypes. Reported-by:
-
David Kershner authored
Handle_command gets moved lower in the file to avoid the need for extraneous function prototypes. Reported-by:
-
David Kershner authored
Move controlvm_periodic_work lower in the file to avoid having to create function prototypes. Reported-by:
-
Jon Frisch authored
This patch moves the unsigned long controlvm_payload_bytes_buffered from the module parameters location to a more appropriate location below the controlvm_payload_info. Signed-off-by:
Jon Frisch <jon.frisch@unisys.com> Signed-off-by:
-
Jon Frisch authored
This patch removes the unused u32 dump_vhba_bus. Signed-off-by:
-
Jon Frisch authored
This patch removes the unused long long bus_count. Signed-off-by:
-
Jon Frisch authored
This patch removes the unused module parameter visorchipset_visorbusregwait Signed-off-by:
-
Chaehyun Lim authored
As suggested by checkpatch.pl: CHECK: Prefer kernel type 'u16' over 'uint16_t' Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
As suggested by checkpatch.pl: CHECK: Prefer kernel type 'u8' over 'uint8_t' Signed-off-by:
-
Anchal Jain authored
Fixes checkpatch warning: WARNING: Avoid unnecessary line continuations Signed-off-by:
Anchal Jain <anchalj109@gmail.com> Acked-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Nayeemahmed Badebade authored
Added __acquires / __releases sparse locking annotations to lock_res_and_lock() and unlock_res_and_lock() functions in l_lock.c, to fix below sparse warnings: l_lock.c:47:22: warning: context imbalance in 'lock_res_and_lock' - wrong count at exit l_lock.c:61:6: warning: context imbalance in 'unlock_res_and_lock' - unexpected unlock Signed-off-by:
Nayeemahmed Badebade <itachi.opsrc@gmail.com> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
-
Sandhya Bankar authored
filp != NULL is already checked, so no need to check it again. Signed-off-by:
Sandhya Bankar <bankarsandhya512@gmail.com> Reviewed-by:
-
Sandhya Bankar authored
Convert array index from the loop bound to the loop index. The structure cl_env_percpu[NR_CPUS] has been initializing for each possible cpu (i.e 0 to i). During initialization if any error will occurred, the error handling code should uninitialize cl_env_percpu upto i. But currently unitialization is repeatedly done for the same cl_env_percpu[i] element. This does not seems to be correct. Used below semantic patch to identify this issue: @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } Signed-off-by: -
Bryan O'Donoghue authored
Add bod to some Greybus protocol drivers maintainers, loopback and timesync. Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by:
-
Christian Gromm authored
To increase comprehension this patch renames the channel related spinlock with a more fitting name. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
-
Christian Gromm authored
This patch removes the calls to usb_unanchor_urb() from the completion routines, since disassociation of the URBs is already handles by the USB subsystem. Signed-off-by:
-
Christian Gromm authored
This patch removes the spinlocks when accessing the usb_anchor list, because the struct usb_anchor is using its own lock. Signed-off-by:
-
Christian Gromm authored
This patch removes the propietary tracking of URBs. Instead the structure usb_anchor of the USB subsystem is used. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.9c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of new device support, functionality and cleanups for IIO in the 4.9 cycle. Given Linus is hinting (strongly!) at an rc8 this last set is hopefully in time for the 4.9 merge window. The zpa2326 and si1145 drivers provide fine illustrations that devices aren't getting any simpler! I'm also particularly pleased Linus Walliej did such a thorough job of cleaning up one of my old drivers. New device support * mCube MC3230 accelerometer - new fairly minimal driver. * Murata zpa2326 - extensive new driver supporting the rather 'novel' buffering of data this device provides and handling both it's own data ready trigger and other triggers rather elegantly. * si1141, si1142, si1143, si1145, si1146 and si1147 proximity, UV, visible and IR sensors. - another extensive new driver supporting all the key bits of what this set of devices supplies including dataready triggers, buffers and all the various data channels. Functionality * kxsd9 - Linus brought this scratch driver I wrote in one afternoon years ago up to date adding lots of good stuff along the way. - SPI support after extensive rework of the driver. - Triggered buffer capture support. - Runtime PM. - Regulator handling. - Mounting matrix support. * mma7660 - Add MODULE_DEVICE_TABLE to support autoprobing. Cleanups * ad5933 - Align some function arguements nicely. * med_z188 - Constify iio_info structure. * sca3000 - Implement IIO_CHAN_INFO_SAMP_FREQ rather than a hand rolled attr. There are still quite a few drivers that would benefit from similar updates. * ssp_sensors - Constify iio_info structures in accel and gyro drivers.
-
- 19 Sep, 2016 8 commits
-
-
Greg Kroah-Hartman authored
This merges the greybus branch into staging-testing. It contains the drivers/staging/greybus/ subsystem and related drivers and has passed the 0-day bot tests so no builds should break. Signed-off-by: -
Rui Miguel Silva authored
Add me to some Greybus protocol drivers maintainers, spi, sdio, power supply, light and gpio. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Johan and Alex and I are going to maintain the greybus code, so add it to MAINTAINERS so we get cc:ed on patches. Acked-by:
Johan Hovold <johan@kernel.org> Acked-by:
Alex Elder <elder@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
The last thing remaining in kernel_ver.h was the setting of CONFIG_PM_RUNTIME, which isn't needed in a in-tree implementation. So remove the setting of this value, and the .h file entirely as that was the last thing left in it. Signed-off-by:Greg Kroah-Hartman <gregkh@google.com>
-
Rui Miguel Silva authored
Remove BROKEN keyword to allow the light driver to be select now that we fixed the kernel version dependencies. Also fix the module name in the help section. Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
-
Rui Miguel Silva authored
Greybus SPI driver depends on gb-spilib and we need to state that at makefile to make it link correctly. Signed-off-by:
-
Rui Miguel Silva authored
No need to support older kernel versions in the Greybus Power Supply driver, so remove the checks as needed, we can now rely on all of the correct Power Supply core apis being present. Also move some properties definitions to the power supply greybus code. Signed-off-by:
-
Rui Miguel Silva authored
No need to support older kernel versions in the Greybus SDIO driver, so remove the checks as needed, we can now rely on all of the correct SDIO core apis being present. Signed-off-by:
-
