- 22 Jun, 2015 2 commits
-
-
Lee Jones authored
Merge branches 'ib-mfd-watchdog-rtc-4.2', 'ib-mfd-regulator-4.2' and 'ib-mfd-i2c-input-chrome-4.2' into ibs-for-mfd-merged
-
Lee Jones authored
Signed-off-by:Lee Jones <lee.jones@linaro.org>
-
- 15 Jun, 2015 10 commits
-
-
Alexandru M Stan authored
Some ECs need a little time for waking up before they can accept SPI data at a high speed. This is configurable via a DT property "google,cros-ec-spi-pre-delay". This patch makes the cros_ec_spi driver to cause a delay before the beginning of a SPI transaction, to make sure that the EC has already woken up, if the property has been defined in the DTS. Signed-off-by:
Alexandru M Stan <amstan@chromium.org> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Chris Zhong <zyw@rock-chips.com> Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Alexandru M Stan authored
Some ECs need a little time for waking up before they can accept SPI data at a high speed. Add a "google,cros-ec-spi-pre-delay" property to the DT binding to configure this. If this property isn't set, then no delay will be added. However, if set it will cause a delay equal to the value passed to it to be inserted at the beginning of a transaction. Signed-off-by:
-
Gwendal Grignou authored
Chromebooks can have more than one Embedded Controller so the cros_ec device id has to be incremented for each EC registered. Add a new structure to represent multiple EC as different char devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to cros_ec_device and allows sysfs inferface for cros_pd. Also reduce number of allocated objects, make chromeos sysfs class object a static and add refcounting to prevent object deletion while command is in progress. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Dmitry Torokhov <dtor@chromium.org> Signed-off-by:
-
Stephen Barber authored
Add proto v3 support to the SPI, I2C, and LPC. Signed-off-by:
Stephen Barber <smbarber@chromium.org> Signed-off-by:
-
Stephen Barber authored
Add support in cros_ec.c to handle EC host command protocol v3. For v3+, probe for maximum shared protocol version and max request, response, and passthrough sizes. For now, this will always fall back to v2, since there is no bus-specific code for handling proto v3 packets. Signed-off-by:
-
Javier Martinez Canillas authored
The MFD driver should only have the logic to instantiate its child devices and setup any shared resources that will be used by the subdevices drivers. The cros_ec MFD is more complex than expected since it also has helpers to communicate with the EC. So the driver will only get more bigger as other protocols are supported in the future. So move the communication protocol helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c. Suggested-by:
-
Stephen Barber authored
Update cros_ec_commands.h to the latest version in the EC firmware sources and add power domain and passthru commands. Also, update lightbar to use new command names. Signed-off-by:
Randall Spangler <rspangler@chromium.org> Signed-off-by:
-
Javier Martinez Canillas authored
Commit 1b84f2a4 ("mfd: cros_ec: Use fixed size arrays to transfer data with the EC") modified the struct cros_ec_command fields to not use pointers for the input and output buffers and use fixed length arrays instead. This change was made because the cros_ec ioctl API uses that struct cros_ec_command to allow user-space to send commands to the EC and to get data from the EC. So using pointers made the API not 64-bit safe. Unfortunately this approach was not flexible enough for all the use-cases since there may be a need to send larger commands on newer versions of the EC command protocol. So to avoid to choose a constant length that it may be too big for most commands and thus wasting memory and CPU cycles on copy from and to user-space or having a size that is too small for some big commands, use a zero-length array that is both 64-bit safe and flexible. The same buffer is used for both output and input data so the maximum of these values should be used to allocate it. Suggested-by:
-
Todd Broch authored
If the EC device tree node has sub-nodes, try to instantiate them as MFD sub-devices. We can configure the EC features provided by the board. Signed-off-by:
Todd Broch <tbroch@chromium.org> Signed-off-by:
-
Gwendal Grignou authored
Parent and device were pointing to the same device structure. Parent is unused, removed. Signed-off-by:
Puthikorn Voravootivat <puthik@chromium.org> Signed-off-by:
-
- 13 May, 2015 6 commits
-
-
Chen-Yu Tsai authored
Now that the axp20x-regulators driver supports different variants of the AXP family, we can enable regulator support for AXP22X without the risk of incorrectly configuring regulators. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Chen-Yu Tsai authored
Add the list of regulators for AXP22x to the DT bindings. This includes the names and supply names. Signed-off-by:
-
Boris BREZILLON authored
Add AXP22X regulator definitions and variant id associations. This introduces a new "switch" type output for one of the regulators. It is a switchable secondary output of one regulator, with the same voltage level as the primary output. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com> [wens@csie.org: Moved variant choosing to multi family support patch] [wens@csie.org: Add dc-dc work frequency range] [wens@csie.org: Add "switch" type output regulator DC1SW] Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Boris BREZILLON authored
Rework the AXP20X_ macros and probe function to support the several chip families, so that each family can define it's own set of regulators. Signed-off-by:
-
Chen-Yu Tsai authored
Add AXP221 to the list of supported devices. Also replace any mention of AXP20x in the document with a generic "PMIC". Signed-off-by:
-
Boris BREZILLON authored
Add support for the AXP22x PMIC devices to the existing AXP20x driver. This includes the AXP221 and AXP223, which are identical except for the external data bus. Only AXP221 is added for now. AXP223 will be added after it's Reduced Serial Bus (RSB) interface is supported. AXP22x defines a new set of registers, power supplies and regulators, but most of the API is similar to the AXP20x ones. A new irq chip definition is used, even though the available interrupts on AXP22x is a subset of those on AXP20x. This is done so the interrupt numbers match those on the datasheet. This patch only enables the interrupts, system power-off function, and PEK sub-device. The regulator driver must first support different variants before we enable it from the mfd driver. Signed-off-by:
-
- 04 May, 2015 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
- 03 May, 2015 8 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
-
https://github.com/markyzq/kernel-drm-rockchipDave Airlie authored
one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
-
Jan Kara authored
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Eric Sandeen <sandeen@redhat.com>
-
Davide Italiano authored
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by:
Davide Italiano <dccitaliano@gmail.com> Signed-off-by:
-
Lukas Czerner authored
Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by:Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
- 02 May, 2015 7 commits
-
-
Chanho Park authored
This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d8 and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by:
Chanho Park <chanho61.park@samsung.com> Signed-off-by:
-
Herbert Xu authored
This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Receive packet length needs to be adjust by 2 on RX to accomodate the two padding bytes in altera_tse driver. From Vlastimil Setka. 2) If rx frame is dropped due to out of memory in macb driver, we leave the receive ring descriptors in an undefined state. From Punnaiah Choudary Kalluri 3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is only for dumps. Fix from Nicolas Dichtel. 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via the ipv4_mtu() helper. From Herbert Xu. 5) Fix null deref in bridge netfilter, and miscalculated lengths in jump/goto nf_tables verdicts. From Florian Westphal. 6) Unhash ping sockets properly. 7) Software implementation of BPF divide did 64/32 rather than 64/64 bit divide. The JITs got it right. Fix from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) ipv4: Missing sk_nulls_node_init() in ping_unhash(). net: fec: Fix RGMII-ID mode net/mlx4_en: Schedule napi when RX buffers allocation fails netxen_nic: use spin_[un]lock_bh around tx_clean_lock net/mlx4_core: Fix unaligned accesses mlx4_en: Use correct loop cursor in error path. cxgb4: Fix MC1 memory offset calculation bnx2x: Delay during kdump load net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table net: dsa: Fix scope of eeprom-length property net: macb: Fix race condition in driver when Rx frame is dropped hv_netvsc: Fix a bug in netvsc_start_xmit() altera_tse: Correct rx packet length mlx4: Fix tx ring affinity_mask creation tipc: fix problem with parallel link synchronization mechanism tipc: remove wrong use of NLM_F_MULTI bridge/nl: remove wrong use of NLM_F_MULTI bridge/mdb: remove wrong use of NLM_F_MULTI net: sched: act_connmark: don't zap skb->nfct trivial: net: systemport: bcmsysport.h: fix 0x0x prefix ... -
Stefan Hajnoczi authored
Here the "other side" refers to the guest or host. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
With my job change kernel work will be "own time"; I'm keeping lguest and modules (and the virtio standards work), but virtio kernel has to go. This makes it clear that Michael is in charge. He's good, but having me watch over his shoulder won't help. Good luck Michael! Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph RBD fix from Sage Weil. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: end I/O the entire obj_request on error
-
David S. Miller authored
If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by:
Wen Xu <hotdog3645@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 01 May, 2015 4 commits
-
-
Ilya Dryomov authored
When we end I/O struct request with error, we need to pass obj_request->length as @nr_bytes so that the entire obj_request worth of bytes is completed. Otherwise block layer ends up confused and we trip on rbd_assert(more ^ (which == img_request->obj_request_count)); in rbd_img_obj_callback() due to more being true no matter what. We already do it in most cases but we are missing some, in particular those where we don't even get a chance to submit any obj_requests, due to an early -ENOMEM for example. A number of obj_request->xferred assignments seem to be redundant but I haven't touched any of obj_request->xferred stuff to keep this small and isolated. Cc: Alex Elder <elder@linaro.org> Cc: stable@vger.kernel.org # 3.10+ Reported-by:Shawn Edwards <lesser.evil@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Theodore Ts'o authored
This obscures the length of the filenames, to decrease the amount of information leakage. By default, we pad the filenames to the next 4 byte boundaries. This costs nothing, since the directory entries are aligned to 4 byte boundaries anyway. Filenames can also be padded to 8, 16, or 32 bytes, which will consume more directory space. Change-Id: Ibb7a0fb76d2c48e2061240a709358ff40b14f322 Signed-off-by: -
Theodore Ts'o authored
Avoid using SHA-1 when calculating the user-visible filename when the encryption key is available, and avoid decrypting lots of filenames when searching for a directory entry in a directory block. Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63 Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "A few more btrfs fixes. These range from corners Filipe found in the new free space cache writeback to a grab bag of fixes from the list" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: btrfs_release_extent_buffer_page didn't free pages of dummy extent Btrfs: fill ->last_trans for delayed inode in btrfs_fill_inode. btrfs: unlock i_mutex after attempting to delete subvolume during send btrfs: check io_ctl_prepare_pages return in __btrfs_write_out_cache btrfs: fix race on ENOMEM in alloc_extent_buffer btrfs: handle ENOMEM in btrfs_alloc_tree_block Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Btrfs: don't check for delalloc_bytes in cache_save_setup Btrfs: fix deadlock when starting writeback of bg caches Btrfs: fix race between start dirty bg cache writeout and bg deletion
-
