Merge tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Features:

   - increase left match history buffer size to provide improved
     conflict resolution in overlapping execution rules.

   - switch buffer allocation to use a memory pool and GFP_KERNEL where
     possible.

   - add compression of policy blobs to reduce memory usage.

  Cleanups:

   - fix spelling mistake "immutible" -> "immutable"

  Bug fixes:

   - fix unsigned len comparison in update_for_len macro

   - fix sparse warning for type-casting of current->real_cred"

* tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: make it so work buffers can be allocated from atomic context
  apparmor: reduce rcu_read_lock scope for aa_file_perm mediation
  apparmor: fix wrong buffer allocation in aa_new_mount
  apparmor: fix unsigned len comparison with less than zero
  apparmor: increase left match history buffer size
  apparmor: Switch to GFP_KERNEL where possible
  apparmor: Use a memory pool instead per-CPU caches
  apparmor: Force type-casting of current->real_cred
  apparmor: fix spelling mistake "immutible" -> "immutable"
  apparmor: fix blob compression when ns is forced on a policy load
  apparmor: fix missing ZLIB defines
  apparmor: fix blob compression build failure on ppc
  apparmor: Initial implementation of raw policy blob compression

Pull more s390 updates from Vasily Gorbik:

 - Make stack unwinder reliable and suitable for livepatching. Add
   unwinder testing module.

 - Fixes for CALL_ON_STACK helper used for stack switching.

 - Fix unwinding from bpf code.

 - Fix getcpu and remove compat support in vdso code.

 - Fix address space control registers initialization.

 - Save KASLR offset for early dumps.

 - Handle new FILTERED_BY_HYPERVISOR reply code in crypto code.

 - Minor perf code cleanup and potential memory leak fix.

 - Add couple of error messages for corner cases during PCI device
   creation.

* tag 's390-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (33 commits)
  s390: remove compat vdso code
  s390/livepatch: Implement reliable stack tracing for the consistency model
  s390/unwind: add stack pointer alignment sanity checks
  s390/unwind: filter out unreliable bogus %r14
  s390/unwind: start unwinding from reliable state
  s390/test_unwind: add program check context tests
  s390/test_unwind: add irq context tests
  s390/test_unwind: print verbose unwinding results
  s390/test_unwind: add CALL_ON_STACK tests
  s390: fix register clobbering in CALL_ON_STACK
  s390/test_unwind: require that unwinding ended successfully
  s390/unwind: add a test for the internal API
  s390/unwind: always inline get_stack_pointer
  s390/pci: add error message on device number limit
  s390/pci: add error message for UID collision
  s390/cpum_sf: Check for SDBT and SDB consistency
  s390/cpum_sf: Use TEAR_REG macro consistantly
  s390/cpum_sf: Remove unnecessary check for pending SDBs
  s390/cpum_sf: Replace function name in debug statements
  s390/kaslr: store KASLR offset for early dumps
  ...

Pull Xtensa updates from Max Filippov:

 - add support for execute in place (XIP) kernels

 - improvements in inline assembly: use named arguments and "m"
   constraints where possible

 - improve stack dumping

 - clean up system_call code and syscall tracing

 - various small fixes and cleanups

* tag 'xtensa-20191201' of git://github.com/jcmvbkbc/linux-xtensa: (30 commits)
  xtensa: clean up system_call/xtensa_rt_sigreturn interaction
  xtensa: fix system_call interaction with ptrace
  xtensa: rearrange syscall tracing
  xtensa: fix syscall_set_return_value
  xtensa: drop unneeded headers from coprocessor.S
  xtensa: entry: Remove unneeded need_resched() loop
  xtensa: use MEMBLOCK_ALLOC_ANYWHERE for KASAN shadow map
  xtensa: fix TLB sanity checker
  xtensa: get rid of __ARCH_USE_5LEVEL_HACK
  xtensa: mm: fix PMD folding implementation
  xtensa: make stack dump size configurable
  xtensa: improve stack dumping
  xtensa: use "m" constraint instead of "r" in futex.h assembly
  xtensa: use "m" constraint instead of "a" in cmpxchg.h assembly
  xtensa: use named assembly arguments in cmpxchg.h
  xtensa: use "m" constraint instead of "a" in atomic.h assembly
  xtensa: use named assembly arguments in atomic.h
  xtensa: use "m" constraint instead of "a" in bitops.h assembly
  xtensa: use named assembly arguments in bitops.h
  xtensa: use macros to generate *_bit and test_and_*_bit functions
  ...

Pull timer updates from Ingo Molnar:
 "The main changes in the timer code in this cycle were:

   - Clockevent updates:

      - timer-of framework cleanups. (Geert Uytterhoeven)

      - Use timer-of for the renesas-ostm and the device name to prevent
        name collision in case of multiple timers. (Geert Uytterhoeven)

      - Check if there is an error after calling of_clk_get in asm9260
        (Chuhong Yuan)

   - ABI fix: Zero out high order bits of nanoseconds on compat
     syscalls. This got broken a year ago, with apparently no side
     effects so far.

     Since the kernel would use random data otherwise I don't think we'd
     have other options but to fix the bug, even if there was a side
     effect to applications (Dmitry Safonov)

   - Optimize ns_to_timespec64() on 32-bit systems: move away from
     div_s64_rem() which can be slow, to div_u64_rem() which is faster
     (Arnd Bergmann)

   - Annotate KCSAN-reported false positive data races in
     hrtimer_is_queued() users by moving timer->state handling over to
     the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
     (Eric Dumazet)

   - Misc cleanups and small fixes"

[ I undid the "ABI fix" and updated the comments instead. The reason
  there were apparently no side effects is that the fix was a no-op.

  The updated comment is to say _why_ it was a no-op.    - Linus ]

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Zero the upper 32-bits in __kernel_timespec on 32-bit
  time: Rename tsk->real_start_time to ->start_boottime
  hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
  time: Fix spelling mistake in comment
  time: Optimize ns_to_timespec64()
  hrtimer: Annotate lockless access to timer->state
  clocksource/drivers/asm9260: Add a check for of_clk_get
  clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
  clocksource/drivers/renesas-ostm: Convert to timer_of
  clocksource/drivers/timer-of: Use unique device name instead of timer
  clocksource/drivers/timer-of: Convert last full_name to %pOF

Pull irq updates from Ingo Molnar:
 "Most of the IRQ subsystem changes in this cycle were irq-chip driver
  updates:

   - Qualcomm PDC wakeup interrupt support

   - Layerscape external IRQ support

   - Broadcom bcm7038 PM and wakeup support

   - Ingenic driver cleanup and modernization

   - GICv3 ITS preparation for GICv4.1 updates

   - GICv4 fixes

  There's also the series from Frederic Weisbecker that fixes memory
  ordering bugs for the irq-work logic, whose primary fix is to turn
  work->irq_work.flags into an atomic variable and then convert the
  complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
  much simpler atomic_fetch_or() call.

  There are also various smaller cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
  pinctrl/msm: Setup GPIO chip in hierarchy
  irqchip/qcom-pdc: Add irqchip set/get state calls
  irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
  irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
  irqchip/qcom-pdc: Update max PDC interrupts
  of/irq: Document properties for wakeup interrupt parent
  genirq: Introduce irq_chip_get/set_parent_state calls
  irqdomain: Add bus token DOMAIN_BUS_WAKEUP
  genirq: Fix function documentation of __irq_alloc_descs()
  irq_work: Fix IRQ_WORK_BUSY bit clearing
  irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
  irq_work: Slightly simplify IRQ_WORK_PENDING clearing
  irq_work: Fix irq_work_claim() memory ordering
  irq_work: Convert flags to atomic_t
  irqchip: Ingenic: Add process for more than one irq at the same time.
  irqchip: ingenic: Alloc generic chips from IRQ domain
  irqchip: ingenic: Get virq number from IRQ domain
  irqchip: ingenic: Error out if IRQ domain creation failed
  irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
  ...

Pull dmi updates from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Add dmi_memdev_handle
  firmware: dmi: Remember the memory type

Pull percpu updates from Dennis Zhou:
 "This has a change to fix percpu-refcount for RT kernels because
  rcu-sched disables preemption and the refcount release callback might
  acquire a spinlock"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  Revert "percpu: add __percpu to SHIFT_PERCPU_PTR"
  percpu-refcount: Use normal instead of RCU-sched"
  percpu: add __percpu to SHIFT_PERCPU_PTR

Add a utility function dmi_memdev_handle() which returns the DMI
handle associated with a given memory slot. This will allow kernel
drivers to iterate over the memory slots.
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Store the memory type while walking the memory slots, and provide a
way to retrieve it later.
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Pull Kbuild updates from Masahiro Yamada:

 - remove unneeded asm headers from hexagon, ia64

 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving

 - add 'helpnewconfig' target, which shows help for new CONFIG options

 - support 'make nsdeps' for external modules

 - make rebuilds faster by deleting $(wildcard $^) checks

 - remove compile tests for kernel-space headers

 - refactor modpost to simplify modversion handling

 - make single target builds faster

 - optimize and clean up scripts/kallsyms.c

 - refactor various Makefiles and scripts

* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
  MAINTAINERS: update Kbuild/Kconfig maintainer's email address
  scripts/kallsyms: remove redundant initializers
  scripts/kallsyms: put check_symbol_range() calls close together
  scripts/kallsyms: make check_symbol_range() void function
  scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
  scripts/kallsyms: move more patterns to the ignored_prefixes array
  scripts/kallsyms: skip ignored symbols very early
  scripts/kallsyms: add const qualifiers where possible
  scripts/kallsyms: make find_token() return (unsigned char *)
  scripts/kallsyms: replace prefix_underscores_count() with strspn()
  scripts/kallsyms: add sym_name() to mitigate cast ugliness
  scripts/kallsyms: remove unneeded length check for prefix matching
  scripts/kallsyms: remove redundant is_arm_mapping_symbol()
  scripts/kallsyms: set relative_base more effectively
  scripts/kallsyms: shrink table before sorting it
  scripts/kallsyms: fix definitely-lost memory leak
  scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
  kbuild: make single target builds even faster
  modpost: respect the previous export when 'exported twice' is warned
  modpost: do not set ->preloaded for symbols from Module.symvers
  ...

Merge tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull more kselftest fixes from Shuah Khan:
 "This second Kselftest fixes update for Linux 5.5-rc1 consists of an
  urgent revert to fix regression in CI coverage"

* tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative paths"

Pull crypto fixes from Herbert Xu:

 - Fix build error in crypto lib code when crypto API is off

 - Fix NULL/error check in hisilicon

 - Fix Kconfig-related build error in talitos

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: hisilicon - fix a NULL vs IS_ERR() bug in sec_create_qp_ctx()
  crypto: talitos - Fix build error by selecting LIB_DES
  crypto: arch - conditionalize crypto api in arch glue for lib code

Pull OpenRISC update from Stafford Horne:
 "White space fixups in Kconfig files from Krzysztof Kozlowski"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix Kconfig indentation

Pull UML updates from Richard Weinberger:

 - Fixes for our new virtio code

 - Fix for the irqflags tracer

 - Kconfig coding style fixes

 - Allow BPF firmware loading in our vector driver

* tag 'for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Loadable BPF "Firmware" for vector drivers
  um: Fix Kconfig indentation
  um: virtio_uml: Disallow modular build
  um: virtio: Keep reading on -EAGAIN
  um: virtio: Remove device on disconnect
  um: Don't trace irqflags during shutdown

Pull UBI/UBIFS/JFFS2 updates from Richard Weinberger:
 "This pull request contains mostly fixes for UBI, UBIFS and JFFS2:

  UBI:

   - Fix a regression around producing a anchor PEB for fastmap.

     Due to a change in our locking fastmap was unable to produce fresh
     anchors an re-used the existing one a way to often.

  UBIFS:

   - Fixes for endianness. A few places blindly assumed little endian.

   - Fix for a memory leak in the orphan code.

   - Fix for a possible crash during a commit.

   - Revert a wrong bugfix.

  JFFS2:

   - Revert a bad bugfix (false positive from a code checking tool)"

* tag 'upstream-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  Revert "jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()"
  ubi: Fix producing anchor PEBs
  ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps
  ubifs: do_kill_orphans: Fix a memory leak bug
  Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path"
  ubifs: Fix type of sup->hash_algo
  ubifs: Fixed missed le64_to_cpu() in journal
  ubifs: Force prandom result to __le32
  ubifs: Remove obsolete TODO from dfs_file_write()
  ubi: Fix warning static is not at beginning of declaration
  ubi: Print skip_check in ubi_dump_vol_info()

Pull XFS updates from Darrick Wong:
 "For this release, we changed quite a few things.

  Highlights:

   - Fixed some long tail latency problems in the block allocator

   - Removed some long deprecated (and for the past several years no-op)
     mount options and ioctls

   - Strengthened the extended attribute and directory verifiers

   - Audited and fixed all the places where we could return EFSCORRUPTED
     without logging anything

   - Refactored the old SGI space allocation ioctls to make the
     equivalent fallocate calls

   - Fixed a race between fallocate and directio

   - Fixed an integer overflow when files have more than a few
     billion(!) extents

   - Fixed a longstanding bug where quota accounting could be incorrect
     when performing unwritten extent conversion on a freshly mounted fs

   - Fixed various complaints in scrub about soft lockups and
     unresponsiveness to signals

   - De-vtable'd the directory handling code, which should make it
     faster

   - Converted to the new mount api, for better or for worse

   - Cleaned up some memory leaks

  and quite a lot of other smaller fixes and cleanups.

  A more detailed summary:

   - Fill out the build string

   - Prevent inode fork extent count overflows

   - Refactor the allocator to reduce long tail latency

   - Rework incore log locking a little to reduce spinning

   - Break up the xfs_iomap_begin functions into smaller more cohesive
     parts

   - Fix allocation alignment being dropped too early when the
     allocation request is for more blocks than an AG is large

   - Other small cleanups

   - Clean up file buftarg retrieval helpers

   - Hoist the resvsp and unresvsp ioctls to the vfs

   - Remove the undocumented biosize mount option, since it has never
     been mentioned as existing or supported on linux

   - Clean up some of the mount option printing and parsing

   - Enhance attr leaf verifier to check block structure

   - Check dirent and attr names for invalid characters before passing
     them to the vfs

   - Refactor open-coded bmbt walking

   - Fix a few places where we return EIO instead of EFSCORRUPTED after
     failing metadata sanity checks

   - Fix a synchronization problem between fallocate and aio dio
     corrupting the file length

   - Clean up various loose ends in the iomap and bmap code

   - Convert to the new mount api

   - Make sure we always log something when returning EFSCORRUPTED

   - Fix some problems where long running scrub loops could trigger soft
     lockup warnings and/or fail to exit due to fatal signals pending

   - Fix various Coverity complaints

   - Remove most of the function pointers from the directory code to
     reduce indirection penalties

   - Ensure that dquots are attached to the inode when performing
     unwritten extent conversion after io

   - Deuglify incore projid and crtime types

   - Fix another AGI/AGF locking order deadlock when renaming

   - Clean up some quota typedefs

   - Remove the FSSETDM ioctls which haven't done anything in 20 years

   - Fix some memory leaks when mounting the log fails

   - Fix an underflow when updating an xattr leaf freemap

   - Remove some trivial wrappers

   - Report metadata corruption as an error, not a (potentially) fatal
     assertion

   - Clean up the dir/attr buffer mapping code

   - Allow fatal signals to kill scrub during parent pointer checks"

* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
  xfs: allow parent directory scans to be interrupted with fatal signals
  xfs: remove the mappedbno argument to xfs_da_get_buf
  xfs: remove the mappedbno argument to xfs_da_read_buf
  xfs: split xfs_da3_node_read
  xfs: remove the mappedbno argument to xfs_dir3_leafn_read
  xfs: remove the mappedbno argument to xfs_dir3_leaf_read
  xfs: remove the mappedbno argument to xfs_attr3_leaf_read
  xfs: remove the mappedbno argument to xfs_da_reada_buf
  xfs: improve the xfs_dabuf_map calling conventions
  xfs: refactor xfs_dabuf_map
  xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
  xfs: report corruption only as a regular error
  xfs: Remove kmem_zone_free() wrapper
  xfs: Remove kmem_zone_destroy() wrapper
  xfs: Remove slab init wrappers
  xfs: fix attr leaf header freemap.size underflow
  xfs: fix some memory leaks in log recovery
  xfs: fix another missing include
  xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
  xfs: remove duplicated include from xfs_dir2_data.c
  ...

Pull FireWire updates from Stefan Richter:

 - another y2038 fix

 - janitorial code movement

* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: code cleanup after vm_map_pages_zero introduction
  firewire: ohci: stop using get_seconds() for BUS_TIME

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: aacraid, ufs, zfcp,
  NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
  plus a whole load of minor updates and fixes.

  The major core changes are Al Viro's reworking of sg's handling of
  copy to/from user, Ming Lei's removal of the host busy counter to
  avoid contention in the multiqueue case and Damien Le Moal's fixing of
  residual tracking across error handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
  scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
  scsi: target: core: Fix a pr_debug() argument
  scsi: iscsi: Don't send data to unbound connection
  scsi: target: iscsi: Wait for all commands to finish before freeing a session
  scsi: target: core: Release SPC-2 reservations when closing a session
  scsi: target: core: Document target_cmd_size_check()
  scsi: bnx2i: fix potential use after free
  Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
  scsi: NCR5380: Add disconnect_mask module parameter
  scsi: NCR5380: Unconditionally clear ICR after do_abort()
  scsi: NCR5380: Call scsi_set_resid() on command completion
  scsi: scsi_debug: num_tgts must be >= 0
  scsi: lpfc: use hdwq assigned cpu for allocation
  scsi: arcmsr: fix indentation issues
  scsi: qla4xxx: fix double free bug
  scsi: pm80xx: Modified the logic to collect fatal dump
  scsi: pm80xx: Tie the interrupt name to the module instance
  scsi: pm80xx: Controller fatal error through sysfs
  scsi: pm80xx: Do not request 12G sas speeds
  scsi: pm80xx: Cleanup command when a reset times out
  ...

Pull Documentation updates from Jonathan Corbet:
 "Here are the main documentation changes for 5.5:

   - Various kerneldoc script enhancements.

   - More RST conversions; those are slowing down as we run out of
     things to convert, but we're a ways from done still.

   - Dan's "maintainer profile entry" work landed at last. Now we just
     need to get maintainers to fill in the profiles...

   - A reworking of the parallel build setup to work better with a
     variety of systems (and to not take over huge systems entirely in
     particular).

   - The MAINTAINERS file is now converted to RST during the build.
     Hopefully nobody ever tries to print this thing, or they will need
     to load a lot of paper.

   - A script and documentation making it easy for maintainers to add
     Link: tags at commit time.

  Also included is the removal of a bunch of spurious CR characters"

* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
  docs: remove a bunch of stray CRs
  docs: fix up the maintainer profile document
  libnvdimm, MAINTAINERS: Maintainer Entry Profile
  Maintainer Handbook: Maintainer Entry Profile
  MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
  docs, parallelism: Rearrange how jobserver reservations are made
  docs, parallelism: Do not leak blocking mode to other readers
  docs, parallelism: Fix failure path and add comment
  Documentation: Remove bootmem_debug from kernel-parameters.txt
  Documentation: security: core.rst: fix warnings
  Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
  Documentation/translation: Use Korean for Korean translation title
  docs/memory-barriers.txt: Remove remaining references to mmiowb()
  docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
  Documentation/kokr: Kill all references to mmiowb()
  docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
  docs: Add initial documentation for devfreq
  Documentation: Document how to get links with git am
  docs: Add request_irq() documentation
  ...

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Pull pstore bug fix from Kees Cook:

 - add missing "static" (Ben Dooks)

* tag 'pstore-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Make pstore_choose_compression() static

Pull iommu updates from Joerg Roedel:

 - Conversion of the AMD IOMMU driver to use the dma-iommu code for
   imlementing the DMA-API. This gets rid of quite some code in the
   driver itself, but also has some potential for regressions (non are
   known at the moment).

 - Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
   This also includes some firmware interface changes, but those are
   acked by the respective maintainers.

 - Preparatory work to support two distinct page-tables per domain in
   the ARM-SMMU driver

 - Power management improvements for the ARM SMMUv2

 - Custom PASID allocator support

 - Multiple PCI DMA alias support for the AMD IOMMU driver

 - Adaption of the Mediatek driver to the changed IO/TLB flush interface
   of the IOMMU core code.

 - Preparatory patches for the Renesas IOMMU driver to support future
   hardware.

* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
  iommu/rockchip: Don't provoke WARN for harmless IRQs
  iommu/vt-d: Turn off translations at shutdown
  iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
  iommu/arm-smmu: Remove duplicate error message
  iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
  iommu/ipmmu-vmsa: Add utlb_offset_base
  iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
  iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
  iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
  iommu/ipmmu-vmsa: tidyup register definitions
  iommu/ipmmu-vmsa: Remove all unused register definitions
  iommu/mediatek: Reduce the tlb flush timeout value
  iommu/mediatek: Get rid of the pgtlock
  iommu/mediatek: Move the tlb_sync into tlb_flush
  iommu/mediatek: Delete the leaf in the tlb_flush
  iommu/mediatek: Use gather to achieve the tlb range flush
  iommu/mediatek: Add a new tlb_lock for tlb_flush
  iommu/mediatek: Correct the flush_iotlb_all callback
  iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
  iommu/io-pgtable-arm: Rationalise MAIR handling
  ...

Pull dmaengine updates from Vinod Koul:
 "Here are the changes this time around, couple of new drivers and
  updates to few more:

   - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
     Freescale dpaa2 qDMA

   - Support for X1000 in JZ4780

   - Xilinx dma updates and support for Xilinx AXI MCDM controller

   - New bindings for rcar R8A774B1

   - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers"

* tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits)
  dmaengine: Fix Kconfig indentation
  dmaengine: sf-pdma: move macro to header file
  dmaengine: sf-pdma: replace /** with /* for non-function comment
  dmaengine: ti: edma: fix missed failure handling
  dmaengine: mmp_pdma: add missed of_dma_controller_free
  dmaengine: mmp_tdma: add missed of_dma_controller_free
  dmaengine: sprd: Add wrap address support for link-list mode
  MAINTAINERS: Add Green as SiFive PDMA driver maintainer
  dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00
  dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA
  dmaengine: zx: remove: removed dmam_pool_destroy
  dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
  dmaengine: iop-adma: clean up an indentation issue
  dmaengine: milbeaut-xdmac: remove redundant error log
  dmaengine: milbeaut-hdmac: remove redundant error log
  dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove
  dmaengine: JZ4780: Add support for the X1000.
  dt-bindings: dmaengine: Add X1000 bindings.
  dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
  dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
  ...

Merge updates from Andrew Morton:
 "Incoming:

   - a small number of updates to scripts/, ocfs2 and fs/buffer.c

   - most of MM

  I still have quite a lot of material (mostly not MM) staged after
  linux-next due to -next dependencies. I'll send those across next week
  as the preprequisites get merged up"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
  mm/page_io.c: annotate refault stalls from swap_readpage
  mm/Kconfig: fix trivial help text punctuation
  mm/Kconfig: fix indentation
  mm/memory_hotplug.c: remove __online_page_set_limits()
  mm: fix typos in comments when calling __SetPageUptodate()
  mm: fix struct member name in function comments
  mm/shmem.c: cast the type of unmap_start to u64
  mm: shmem: use proper gfp flags for shmem_writepage()
  mm/shmem.c: make array 'values' static const, makes object smaller
  userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
  fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
  userfaultfd: wrap the common dst_vma check into an inlined function
  userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
  userfaultfd: use vma_pagesize for all huge page size calculation
  mm/madvise.c: use PAGE_ALIGN[ED] for range checking
  mm/madvise.c: replace with page_size() in madvise_inject_error()
  mm/mmap.c: make vma_merge() comment more easy to understand
  mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  autonuma: reduce cache footprint when scanning page tables
  autonuma: fix watermark checking in migrate_balanced_pgdat()
  ...

Pull networking fixes from David Miller:

 1) Fix several scatter gather list issues in kTLS code, from Jakub
    Kicinski.

 2) macb driver device remove has to kill the hresp_err_tasklet. From
    Chuhong Yuan.

 3) Several memory leak and reference count bug fixes in tipc, from Tung
    Nguyen.

 4) Fix mlx5 build error w/o ipv6, from Yue Haibing.

 5) Fix jumbo frame and other regressions in r8169, from Heiner
    Kallweit.

 6) Undo some BUG_ON()'s and replace them with WARN_ON_ONCE and proper
    error propagation/handling. From Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (24 commits)
  openvswitch: remove another BUG_ON()
  openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()
  net: phy: realtek: fix using paged operations with RTL8105e / RTL8208
  r8169: fix resume on cable plug-in
  r8169: fix jumbo configuration for RTL8168evl
  net: emulex: benet: indent a Kconfig depends continuation line
  selftests: forwarding: fix race between packet receive and tc check
  net: sched: fix `tc -s class show` no bstats on class with nolock subqueues
  net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  net/mlx5e: Fix build error without IPV6
  selftests: pmtu: use -oneline for ip route list cache
  tipc: fix duplicate SYN messages under link congestion
  tipc: fix wrong timeout input for tipc_wait_for_cond()
  tipc: fix wrong socket reference counter after tipc_sk_timeout() returns
  tipc: fix potential memory leak in __tipc_sendmsg()
  net: macb: add missed tasklet_kill
  selftests: bpf: correct perror strings
  selftests: bpf: test_sockmap: handle file creation failures gracefully
  net/tls: use sg_next() to walk sg entries
  net/tls: remove the dead inplace_crypto code
  ...

Pull x86 fixes from Ingo Molnar:
 "Various fixes:

   - Fix the PAT performance regression that downgraded write-combining
     device memory regions to uncached.

   - There's been a number of bugs in 32-bit double fault handling -
     hopefully all fixed now.

   - Fix an LDT crash

   - Fix an FPU over-optimization that broke with GCC9 code
     optimizations.

   - Misc cleanups"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pat: Fix off-by-one bugs in interval tree search
  x86/ioperm: Save an indentation level in tss_update_io_bitmap()
  x86/fpu: Don't cache access to fpu_fpregs_owner_ctx
  x86/entry/32: Remove unused 'restore_all_notrace' local label
  x86/ptrace: Document FSBASE and GSBASE ABI oddities
  x86/ptrace: Remove set_segment_reg() implementations for current
  x86/traps: die() instead of panicking on a double fault
  x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit
  x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area
  x86/doublefault/32: Rename doublefault.c to doublefault_32.c
  x86/traps: Disentangle the 32-bit and 64-bit doublefault code
  lkdtm: Add a DOUBLE_FAULT crash type on x86
  selftests/x86/single_step_syscall: Check SYSENTER directly
  x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()

Pull perf fixes from Ingo Molnar:

 - Make /sys/devices/cpu/rdpmc based RDPMC enforcement more
   instantaneous

 - decoder: Update the Intel opcode map

 - Various tooling fixes, including a few late optimizations and
   cleanups.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  perf script: Fix invalid LBR/binary mismatch error
  perf script: Fix brstackinsn for AUXTRACE
  perf affinity: Add infrastructure to save/restore affinity
  perf pmu: Use file system cache to optimize sysfs access
  perf regs: Make perf_reg_name() return "unknown" instead of NULL
  perf diff: Use llabs() with 64-bit values
  perf diff: Use llabs() with 64-bit values
  perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0
  perf tools: Allow to link with libbpf dynamicaly
  perf tests: Rename tests/map_groups.c to tests/maps.c
  perf tests: Rename thread-mg-share to thread-maps-share
  perf maps: Rename map_groups.h to maps.h
  perf maps: Rename 'mg' variables to 'maps'
  perf map_symbol: Rename ms->mg to ms->maps
  perf addr_location: Rename al->mg to al->maps
  perf thread: Rename thread->mg to thread->maps
  perf maps: Merge 'struct maps' with 'struct map_groups'
  x86/insn: perf tools: Add some more instructions to the new instructions test
  x86/insn: Add some more Intel instructions to the opcode map
  perf map: Remove unused functions
  ...

Pull input updates from Dmitry Torokhov:

 - updates to Ilitech driver to support ILI2117

 - face lift of st1232 driver to support MT-B protocol

 - a new driver for i.MX system controller keys

 - mpr121 driver now supports polling mode

 - various input drivers have been switched away from input_polled_dev
   to use polled mode of regular input devices

 - other assorted cleanups and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits)
  Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54
  Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus
  Input: fix Kconfig indentation
  Input: imx_sc_key - correct SCU message structure to avoid stack corruption
  Input: ili210x - optionally show calibrate sysfs attribute
  Input: ili210x - add resolution to chip operations structure
  Input: ili210x - do not retrieve/print chip firmware version
  Input: mms114 - use device_get_match_data
  Input: ili210x - remove unneeded suspend and resume handlers
  Input: ili210x - do not unconditionally mark touchscreen as wakeup source
  Input: ili210x - define and use chip operations structure
  Input: ili210x - do not set parent device explicitly
  Input: ili210x - handle errors from input_mt_init_slots()
  Input: ili210x - switch to using threaded IRQ
  Input: ili210x - add ILI2117 support
  dt-bindings: input: touchscreen: ad7879: generic node names in example
  Input: ar1021 - fix typo in preprocessor macro name
  Input: synaptics-rmi4 - simplify data read in rmi_f54_work
  Input: kxtj9 - switch to using polled mode of input devices
  Input: kxtj9 - switch to using managed resources
  ...

Pull libnvdimm updates from Dan Williams:
 "The highlight this cycle is continuing integration fixes for PowerPC
  and some resulting optimizations.

  Summary:

   - Updates to better support vmalloc space restrictions on PowerPC
     platforms.

   - Cleanups to move common sysfs attributes to core 'struct
     device_type' objects.

   - Export the 'target_node' attribute (the effective numa node if pmem
     is marked online) for regions and namespaces.

   - Miscellaneous fixups and optimizations"

* tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
  MAINTAINERS: Remove Keith from NVDIMM maintainers
  libnvdimm: Export the target_node attribute for regions and namespaces
  dax: Add numa_node to the default device-dax attributes
  libnvdimm: Simplify root read-only definition for the 'resource' attribute
  dax: Simplify root read-only definition for the 'resource' attribute
  dax: Create a dax device_type
  libnvdimm: Move nvdimm_bus_attribute_group to device_type
  libnvdimm: Move nvdimm_attribute_group to device_type
  libnvdimm: Move nd_mapping_attribute_group to device_type
  libnvdimm: Move nd_region_attribute_group to device_type
  libnvdimm: Move nd_numa_attribute_group to device_type
  libnvdimm: Move nd_device_attribute_group to device_type
  libnvdimm: Move region attribute group definition
  libnvdimm: Move attribute groups to device type
  libnvdimm: Remove prototypes for nonexistent functions
  libnvdimm/btt: fix variable 'rc' set but not used
  libnvdimm/pmem: Delete include of nd-core.h
  libnvdimm/namespace: Differentiate between probe mapping and runtime mapping
  libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe
  libnvdimm: Trivial comment fix
  ...

Pull mailbox updates from Jassi Brar:

 - omap : misc - catch error returned from pm_runtime_put_sync

 - hisi : misc - drop .owner from platform_driver

 - stm : change how wakeup is handled

 - imx : fix - bailout on error and nuke correct irq

 - imx : add support for imx7ulp platform

* tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: add support for imx v1 mu
  dt-bindings: mailbox: imx-mu: add imx7ulp MU support
  mailbox: imx: Clear the right interrupts at shutdown
  mailbox: imx: Fix Tx doorbell shutdown path
  mailbox: stm32-ipcc: Update wakeup management
  mailbox: no need to set .owner platform_driver_register
  mailbox/omap: Handle if CONFIG_PM is disabled

Pull hwspinlock updates from Bjorn Andersson:
 "This contains a number of cleanups to the core and several drivers, in
  particular removing the requirement for drivers to implement
  pm_runtime.

  It also udpates the location of the git tree in MAINTAINERS"

* tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  hwspinlock: u8500_hsem: Remove redundant PM runtime implementation
  hwspinlock: sprd: Remove redundant PM runtime implementation
  hwspinlock: Let the PM runtime can be optional
  hwspinlock: Remove BUG_ON() from the hwspinlock core
  hwspinlock: sprd: Use devm_hwspin_lock_register() to register hwlock controller
  hwspinlock: sprd: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
  hwspinlock: sprd: Check the return value of clk_prepare_enable()
  hwspinlock: sprd: Change to use devm_platform_ioremap_resource()
  hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller
  hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory
  hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource()
  MAINTAINERS: hwspinlock: update git tree location

Pull rpmsg updates from Bjorn Andersson:
 "This contains a number of bug fixes to the GLINK transport driver, an
  off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg
  char driver"

* tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  rpmsg: Fix Kconfig indentation
  rpmsg: char: Simplify 'rpmsg_eptdev_release()'
  rpmsg: glink: Free pending deferred work on remove
  rpmsg: glink: Don't send pending rx_done during remove
  rpmsg: glink: Fix rpmsg_register_device err handling
  rpmsg: glink: Put an extra reference during cleanup
  rpmsg: glink: Fix use after free in open_ack TIMEOUT case
  rpmsg: glink: Fix reuse intents memory leak issue
  rpmsg: glink: Set tail pointer to 0 at end of FIFO
  rpmsg: char: release allocated memory

Pull remoteproc updates from Bjorn Andersson:
 "This adds support for booting the modem processor on Qualcomm MSM8998
  and carries some cleanup up and bug fixes to the framework and the
  stm32 driver"

* tag 'rproc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  Revert "dt-bindings: remoteproc: stm32: add wakeup-source"
  remoteproc: stm32: fix probe error case
  remoteproc: stm32: wakeup the system by wdg irq
  dt-bindings: remoteproc: stm32: add wakeup-source
  remoteproc: Fix wrong rvring index computation
  remoteproc: stm32: use workqueue to treat mailbox callback
  remoteproc: fix argument 2 of rproc_mem_entry_init
  remoteproc: qcom_q6v5_mss: Add support for MSM8998
  dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998
  remoteproc: debug: Remove unneeded NULL check
  remoteproc: remove useless typedef

Pull i2c updates from Wolfram Sang:
 "I2C has mostly driver updates this time.

  The few noteworthy changes are: the core has now support for analog
  and digital filters with at91 being the first user, a core addition to
  replace the NULL returning i2c_new_probed_device() with an ERR_PTR
  variant, and the pxa driver has finally being moved to use the generic
  I2C slave interface. We have quite a significant number of reviews per
  patch this time, so thank you to all involved!"

* 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
  video: fbdev: matrox: convert to i2c_new_scanned_device
  i2c: icy: convert to i2c_new_scanned_device
  i2c: replace i2c_new_probed_device with an ERR_PTR variant
  i2c: Fix Kconfig indentation
  i2c: smbus: Don't filter out duplicate alerts
  i2c: i801: Correct Intel Jasper Lake SOC naming
  i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop
  i2c: iproc: Add i2c repeated start capability
  i2c: remove helpers for ref-counting clients
  i2c: tegra: Use dma_request_chan() directly for channel request
  i2c: sh_mobile: Use dma_request_chan() directly for channel request
  i2c: qup: Use dma_request_chan() directly for channel request
  i2c: at91: Use dma_request_chan() directly for channel request
  i2c: rcar: Remove superfluous call to clk_get_rate()
  i2c: pxa: remove unused i2c-slave APIs
  i2c: pxa: migrate to new i2c_slave APIs
  i2c: cros-ec-tunnel: Make the device acpi compatible
  i2c: stm32f7: report dma error during probe
  i2c: icy: no need to populate address for scanned device
  i2c: xiic: Fix kerneldoc warnings
  ...

Pull block fixes from Jens Axboe:
 "I wasn't going to send this one off so soon, but unfortunately one of
  the fixes from the previous pull broke the build on some archs. So I'm
  sending this sooner rather than later. This contains:

   - Add highmem.h include for io_uring, because of the kmap() additions
     from last round. For some reason the build bot didn't spot this
     even though it sat for days.

   - Three minor ';' removals

   - Add support for the Beurer CD-on-a-chip device

   - Make io_uring work on MMU-less archs"

* tag 'for-linus-20191129' of git://git.kernel.dk/linux-block:
  io_uring: fix missing kmap() declaration on powerpc
  ataflop: Remove unneeded semicolon
  block: sunvdc: Remove unneeded semicolon
  drbd: Remove unneeded semicolon
  io_uring: add mapping support for NOMMU archs
  sr_vendor: support Beurer GL50 evo CD-on-a-chip devices.
  cdrom: respect device capabilities during opening action

Pull x86 platform driver updates from Andy Shevchenko:

 - New bootctl driver for Mellanox BlueField SoC.

 - New driver to support System76 laptops.

 - Temperature monitoring and fan control on Acer Aspire 7551 is now
   supported.

 - Previously the Huawei driver handled only hotkeys. After the
   conversion to WMI it has been expanded to support newer laptop
   models.

 - Big refactoring of intel-speed-select tools allows to use it on Intel
   CascadeLake-N systems.

 - Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets

 - Miscellaneous clean ups and fixes here and there.

* tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits)
  platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
  platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
  platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver
  platform/x86: intel_pmc_core: Fix the SoC naming inconsistency
  platform/mellanox: Fix Kconfig indentation
  tools/power/x86/intel-speed-select: Display TRL buckets for just base config level
  tools/power/x86/intel-speed-select: Ignore missing config level
  platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet
  tools/power/x86/intel-speed-select: Increment version
  tools/power/x86/intel-speed-select: Use core count for base-freq mask
  tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select
  tools/power/x86/intel-speed-select: Use Frequency weight for CLOS
  tools/power/x86/intel-speed-select: Make CLOS frequency in MHz
  tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG
  tools/power/x86/intel-speed-select: Auto mode for CLX
  tools/power/x86/intel-speed-select: Correct CLX-N frequency units
  tools/power/x86/intel-speed-select: Change display of "avx" to "avx2"
  tools/power/x86/intel-speed-select: Extend command set for perf-profile
  Add touchscreen platform data for the Schneider SCT101CTM tablet
  platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip
  ...

Pull HID updates from Jiri Kosina:

 - Support for Logitech G15 (Hans de Goede)

 - HID parser improvements, improving support for some devices; e.g.
   Windows Precision Touchpad, products from Primax, etc. (Blaž
   Hrastnik, Candle Sun)

 - robustification of tablet mode support in google-whiskers driver
   (Dmitry Torokhov)

 - assorted small fixes, device-specific quirks and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits)
  HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
  HID: quirks: remove hid-led devices from hid_have_special_driver
  HID: Improve Windows Precision Touchpad detection.
  HID: i2c-hid: Reset ALPS touchpads on resume
  HID: i2c-hid: fix no irq after reset on raydium 3118
  HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
  HID: i2c-hid: remove orphaned member sleep_delay
  HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
  HID: core: check whether Usage Page item is after Usage ID items
  HID: intel-ish-hid: Spelling s/diconnect/disconnect/
  HID: google: Detect base folded usage instead of hard-coding whiskers
  HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry
  HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs
  HID: lg-g15: Add support for controlling the G510's RGB backlight
  HID: lg-g15: Add support for the G510 keyboards' gaming keys
  HID: lg-g15: Add support for the M1-M3 and MR LEDs
  HID: lg-g15: Add keyboard and LCD backlight control
  HID: Add driver for Logitech gaming keyboards (G15, G15 v2)
  Input: Add event-codes for macro keys found on various keyboards
  HID: hidraw: replace printk() with corresponding pr_xx() variant
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - support for NCT6116D

 - several small fixes and improvements

* tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  watchdog: jz4740: Drop dependency on MACH_JZ47xx
  watchdog: jz4740: Use regmap provided by TCU driver
  watchdog: jz4740: Use WDT clock provided by TCU driver
  dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  watchdog: sama5d4_wdt: cleanup the bit definitions
  watchdog: sprd: Fix the incorrect pointer getting from driver data
  watchdog: aspeed: Fix clock behaviour for ast2600
  watchdog: imx7ulp: Fix reboot hang
  watchdog: make nowayout sysfs file writable
  watchdog: prevent deferral of watchdogd wakeup on RT
  watchdog: imx7ulp: Use definitions instead of magic values
  watchdog: imx7ulp: Remove inline annotations
  watchdog: imx7ulp: Remove unused structure member
  watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()
  watchdog: wdat_wdt: Spelling s/configrable/configurable/
  watchdog: bd70528: Trivial function documentation fix
  watchdog: cadence: Do not show error in case of deferred probe
  watchdog: Fix the race between the release of watchdog_core_data and cdev
  watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning
  watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.5 kernel cycle

  Core changes:

   - Expose pull up/down flags for the GPIO character device to
     userspace.

     After clear input from the RaspberryPi and Beagle communities, it
     has been established that prototyping, industrial automation and
     make communities strongly need this feature, and as we want people
     to use the character device, we have implemented the simple pull
     up/down interface for GPIO lines.

     This means we can specify that a (chip-specific) pull up/down
     resistor can be enabled, but does not offer fine-grained control
     such as cases where the resistance of the same pull resistor can be
     controlled (yet).

   - Introduce devm_fwnode_gpiod_get_index() and start to phase out the
     old symbol devm_fwnode_get_index_gpiod_from_child().

   - A bit of documentation clean-up work.

   - Introduce a define for GPIO line directions and deploy it in all
     GPIO drivers in the drivers/gpio directory.

   - Add a special callback to populate pin ranges when cooperating with
     the pin control subsystem and registering ranges as part of adding
     a gpiolib driver and a gpio_irq_chip driver at the same time. This
     is also deployed in the Intel Merrifield driver.

  New drivers:

   - RDA Micro GPIO controller.

   - XGS-iproc GPIO driver.

  Driver improvements:

   - Wake event and debounce support on the Tegra 186 driver.

   - Finalize the Aspeed SGPIO driver.

   - MPC8xxx uses a normal IRQ handler rather than a chained handler"

* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
  gpio: Add TODO item for regmap helper
  Documentation: gpio: driver.rst: Fix warnings
  gpio: of: Fix bogus reference to gpiod_get_count()
  gpiolib: Grammar s/manager/managed/
  gpio: lynxpoint: Setup correct IRQ handlers
  MAINTAINERS: Replace my email by one @kernel.org
  gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
  gpio/mpc8xxx: fix qoriq GPIO reading
  gpio: mpc8xxx: Don't overwrite default irq_set_type callback
  gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  gpiolib: fix coding style in gpiod_hog()
  drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
  gpio: merrifield: Pass irqchip when adding gpiochip
  gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
  gpiolib: Introduce ->add_pin_ranges() callback
  gpio: mmio: remove untrue leftover comment
  gpio: em: Use platform_get_irq() to obtain interrupts
  gpio: tegra186: Add debounce support
  gpio: tegra186: Program interrupt route mapping
  gpio: tegra186: Derive register offsets from bank/port
  ...

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for a "resource managed strongly uncachable ioremap"
     call
   - Provide a collection of MFD helper macros
   - Remove mfd_clone_cell() from MFD core
   - Add NULL de-reference protection in MFD core
   - Remove superfluous function fd_platform_add_cell() from MFD core
   - Honour Device Tree's request to disable a device

  New Drivers:
   - Add support for MediaTek MT6323 PMIC

  New Device Support:
   - Add support for Gemini Lake to Intel LPSS PCI
   - Add support for Cherry Trail Crystal Cover PMIC to Intel SoC PMIC
     CRC
   - Add support for PM{I}8950 to Qualcomm SPMI PMIC
   - Add support for U8420 to ST-Ericsson DB8500
   - Add support for Comet Lake PCH-H to Intel LPSS PCI

  New Functionality:
   - Add support for requested supply clocks; madera-core

  Fix-ups:
   - Lower interrupt priority; rk808
   - Use provided helpers (macros, group functions, defines); rk808,
     ipaq-micro, ab8500-core, db8500-prcmu, mt6397-core, cs5535-mfd
   - Only allocate IRQs on request; max77620
   - Use simplified API; arizona-core
   - Remove redundant and/or duplicated code; wm8998-tables, arizona,
     syscon
   - Device Tree binding fix-ups; madera, max77650, max77693
   - Remove mfd_cell->id abuse hack; cs5535-mfd
   - Remove only user of mfd_clone_cell(); cs5535-mfd
   - Make resources static; rohm-bd70528

  Bug Fixes:
   - Fix product ID for RK818; rk808
   - Fix Power Key; rk808
   - Fix booting on the BananaPi; mt6397-core
   - Endian fix-ups; twl.h
   - Fix static error checker warnings; ti_am335x_tscadc"

* tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
  Revert "mfd: syscon: Set name of regmap_config"
  mfd: ti_am335x_tscadc: Fix static checker warning
  mfd: bd70528: Staticize bit value definitions
  mfd: mfd-core: Honour Device Tree's request to disable a child-device
  dt-bindings: mfd: max77693: Fix missing curly brace
  mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs
  mfd: db8500-prcmu: Support U8420-sysclk firmware
  dt-bindings: mfd: max77650: Convert the binding document to yaml
  mfd: mfd-core: Move pdev->mfd_cell creation back into mfd_add_device()
  mfd: mfd-core: Remove usage counting for .{en,dis}able() call-backs
  x86: olpc-xo1-sci: Remove invocation of MFD's .enable()/.disable() call-backs
  x86: olpc-xo1-pm: Remove invocation of MFD's .enable()/.disable() call-backs
  mfd: mfd-core: Remove mfd_clone_cell()
  mfd: mfd-core: Protect against NULL call-back function pointer
  mfd: cs5535-mfd: Register clients using their own dedicated MFD cell entries
  mfd: cs5535-mfd: Request shared IO regions centrally
  mfd: cs5535-mfd: Remove mfd_cell->id hack
  mfd: cs5535-mfd: Use PLATFORM_DEVID_* defines and tidy error message
  mfd: intel_soc_pmic_crc: Add "cht_crystal_cove_pmic" cell to CHT cells
  mfd: madera: Add support for requesting the supply clocks
  ...