An error occurred fetching the project authors.
- 17 Feb, 2010 1 commit
-
-
Sathya Perla authored
When an MCC cmd is issued (via a netdev/ethtool op) while the device is not open, the MCC CQ gets processed but the EQ is not processed (as isr is not registered.) This can cause the EQ to become full. So, while the device is not open, CQ must not be re-armed to prevent EQ entries. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Feb, 2010 1 commit
-
-
Sathya Perla authored
The code has been tested on IBM pSeries server. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Feb, 2010 3 commits
-
-
Ajit Khaparde authored
Since the driver is supporting multiple generations of the ASIC remove ASIC generation information from the driver description. This information is displayed by modinfo. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
In certain skews the ASIC can support only 16 vlans per interface. Once the limit is crossed, the ASIC is programmed in vlan promiscuous mode. Switch off the vlan promiscuous mode once the number of vlans falls back to the max vlans supported. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
We are not going to use this device id. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Jan, 2010 1 commit
-
-
Ajit Khaparde authored
Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Dec, 2009 1 commit
-
-
Sarveshwar Bandi authored
Changes to return correct values for transceiver and supported in ethtool get_settings function. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Dec, 2009 2 commits
-
-
Ajit Khaparde authored
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Add support for WOL using Magic Packet after suspend is done. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Dec, 2009 2 commits
-
-
Ajit Khaparde authored
Every time while doing ethtool->get_settings we are accessing the hardware to get link status and port information. This is not necessary. We now use the cached copy for this info and update it when the link status changes. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Add be_rx_polls to count number of times NAPI called rx poll function. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Nov, 2009 1 commit
-
-
Sathya Perla authored
To send upto 64 addresses in the multicast-set cmd, the non-embeeded cmd format that provides for a bigger buffer is used instead of an embedded format. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Nov, 2009 1 commit
-
-
Ajit Khaparde authored
If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Oct, 2009 1 commit
-
-
Ajit Khaparde authored
Add new PCI ids to support next generation of BladeEngine device. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Oct, 2009 1 commit
-
-
Ajit Khaparde authored
adapter doesnot need to maintain a copy of net_device_stats. Use the one already available in net_device. This patch takes care of the same. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Oct, 2009 1 commit
-
-
Ajit Khaparde authored
vtp bit in RX completion descriptor could be wrongly set in some skews of BladEngine. Ignore this bit if vtm is not set. Resending because the previous patch was against net-next tree. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Sep, 2009 1 commit
-
-
Sathya Perla authored
All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Sep, 2009 1 commit
-
-
Ajit Khaparde authored
Changes to support flashing of the be2 network adapter using the request_firmware() & ethtool infrastructure. The trigger to flash the device will come from ethtool utility. The driver will invoke request_firmware() to start the flash process. The file containing the flash image is expected to be available in /lib/firmware/ Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Sep, 2009 1 commit
-
-
Stephen Hemminger authored
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Aug, 2009 2 commits
-
-
Sathya Perla authored
pci function is available as PCI_FUNC(pdev->devfn); no need for a separate field. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Currently only the be_ctrl_info struct ptr (instead of adapter) is passed to all the routines in be_cmds.c. Instead pass be_adapter ptr to allow access to all its fields. Merge the contents of struct be_ctrl_info into be_adapter. The resulting code is simpler. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Jul, 2009 1 commit
-
-
Ajit Khaparde authored
This patch removes support for INET_LRO and switches over to GRO. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Jun, 2009 1 commit
-
-
Ajit Khaparde authored
While testing the driver on PPC, we ran into a crash with LRO, Jumbo frames. With CONFIG_PPC_64K_PAGES configured (a default in PPC), MAX_SKB_FRAGS drops to 3 and we were crossing the array limits on skb_shinfo(skb)->frags[]. Now we coalesce the frags from the same physical page into one slot in skb_shinfo(skb)->frags[] and go to the next index when the frag is from different physical page. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Jun, 2009 3 commits
-
-
Sathya Perla authored
Rcv and process ansync link status notifications from BE instead of polling for link status in the be_worker thread. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Cleanup multicast_set method to avoid an extra copy of mc_list and unwanted promiscuos sets to BE. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Currenlty all cmds use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. Instead cmds that may be called in BH context must use the MCC queue to post cmds. The cmd completions are rcvd in a separate completion queue and the events are placed in the tx-event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 May, 2009 1 commit
-
-
Ajit Khaparde authored
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Mar, 2009 1 commit
-
-
Sathya Perla authored
Hi, Pls accept this patch to cleanup rx/tx rate calculations as follows: - check for jiffies wraparound - remove typecast of a denominator - do rate calculation only in workqueue context periodically Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Mar, 2009 1 commit
-
-
Sathya Perla authored
This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Mar, 2009 1 commit
-
-
Sathya Perla authored
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-