- 06 Aug, 2017 26 commits
-
-
Ben Skeggs authored
commit 38bcb208 upstream. Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilia Mirkin authored
commit a90e049c upstream. GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff1 ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Sinclair Yeh authored
commit 7b009e76 upstream. This was originally chosen to be an arbitrarily large number. However, some user mode may actually try to set a 16Kx16K mode and run into other issues. Since 8Kx8K is the current texture limit for Mesa LLVM driver, we will just use this limit for now. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Sinclair Yeh authored
commit fcfffdd8 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ofer Heifetz authored
commit 7e96d559 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
commit 16d56e2f upstream. After bio is submitted, we should not clone it as its bi_iter might be invalid by driver. This is the case of behind_master_bio. In certain situration, we could dispatch behind_master_bio immediately for the first disk and then clone it for other disks. https://bugzilla.kernel.org/show_bug.cgi?id=196383Reported-and-tested-by:
Markus <m4rkusxxl@web.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Fix: 841c1316(md: raid1: improve write behind) Signed-off-by:
-
Ming Lei authored
commit 022e510f upstream. bio_add_page() won't fail for resync bio, and the page index for each bio is same, so remove it. More importantly the 'idx' of 'struct resync_pages' is initialized in mempool allocator function, the current way is wrong since mempool is only responsible for allocation, we can't use that for initialization. Suggested-by:
NeilBrown <neilb@suse.com> Reported-by:
Patrick <dto@gmx.net> Fixes: f0250618(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c58(md: raid1: don't use bio's vec table to manage resync pages) Signed-off-by:
-
Mikulas Patocka authored
commit bc86a41e upstream. If the dm-integrity superblock was corrupted in such a way that the journal_sections field was zero, the integrity target would deadlock because it would wait forever for free space in the journal. Detect this situation and refuse to activate the device. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: 7eada909 ("dm: add integrity target") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 9dd59727 upstream. When using a block size greater than 512 bytes, the dm-integrity target allocates journal space inefficiently. It allocates one journal entry for each 512-byte chunk of data, fills an entry for each block of data and leaves the remaining entries unused. This issue doesn't cause data corruption, but all the unused journal entries degrade performance severely. For example, with 4k blocks and an 8k bio, it would allocate 16 journal entries but only use 2 entries. The remaining 14 entries were left unused. Fix this by adding the missing 'log2_sectors_per_block' shifts that are required to have each journal entry map to a full block. Signed-off-by:
-
Paul Mackerras authored
commit ef427198 upstream. Commit f98a8bf9 ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size", 2016-12-20) changed the behaviour of the KVM_PPC_ALLOCATE_HTAB ioctl so that it now allocates a new HPT and new revmap array if there was a previously-allocated HPT of a different size from the size being requested. In this case, we need to reset the rmap arrays of the memslots, because the rmap arrays will contain references to HPTEs which are no longer valid. Worse, these references are also references to slots in the new revmap array (which parallels the HPT), and the new revmap array contains random contents, since it doesn't get zeroed on allocation. The effect of having these stale references to slots in the revmap array that contain random contents is that subsequent calls to functions such as kvmppc_add_revmap_chain will crash because they will interpret the non-zero contents of the revmap array as HPTE indexes and thus index outside of the revmap array. This leads to host crashes such as the following. [ 7072.862122] Unable to handle kernel paging request for data at address 0xd000000c250c00f8 [ 7072.862218] Faulting instruction address: 0xc0000000000e1c78 [ 7072.862233] Oops: Kernel access of bad area, sig: 11 [#1] [ 7072.862286] SMP NR_CPUS=1024 [ 7072.862286] NUMA [ 7072.862325] PowerNV [ 7072.862378] Modules linked in: kvm_hv vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm iw_cxgb3 mlx5_ib ib_core ses enclosure scsi_transport_sas ipmi_powernv ipmi_devintf ipmi_msghandler powernv_op_panel i2c_opal nfsd auth_rpcgss oid_registry [ 7072.863085] nfs_acl lockd grace sunrpc kvm_pr kvm xfs libcrc32c scsi_dh_alua dm_service_time radeon lpfc nvme_fc nvme_fabrics nvme_core scsi_transport_fc i2c_algo_bit tg3 drm_kms_helper ptp pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm dm_multipath i2c_core cxgb3 mlx5_core mdio [last unloaded: kvm_hv] [ 7072.863381] CPU: 72 PID: 56929 Comm: qemu-system-ppc Not tainted 4.12.0-kvm+ #59 [ 7072.863457] task: c000000fe29e7600 task.stack: c000001e3ffec000 [ 7072.863520] NIP: c0000000000e1c78 LR: c0000000000e2e3c CTR: c0000000000e25f0 [ 7072.863596] REGS: c000001e3ffef560 TRAP: 0300 Not tainted (4.12.0-kvm+) [ 7072.863658] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE,TM[E]> [ 7072.863667] CR: 44082882 XER: 20000000 [ 7072.863767] CFAR: c0000000000e2e38 DAR: d000000c250c00f8 DSISR: 42000000 SOFTE: 1 GPR00: c0000000000e2e3c c000001e3ffef7e0 c000000001407d00 d000000c250c00f0 GPR04: d00000006509fb70 d00000000b3d2048 0000000003ffdfb7 0000000000000000 GPR08: 00000001007fdfb7 00000000c000000f d0000000250c0000 000000000070f7bf GPR12: 0000000000000008 c00000000fdad000 0000000010879478 00000000105a0d78 GPR16: 00007ffaf4080000 0000000000001190 0000000000000000 0000000000010000 GPR20: 4001ffffff000415 d00000006509fb70 0000000004091190 0000000ee1881190 GPR24: 0000000003ffdfb7 0000000003ffdfb7 00000000007fdfb7 c000000f5c958000 GPR28: d00000002d09fb70 0000000003ffdfb7 d00000006509fb70 d00000000b3d2048 [ 7072.864439] NIP [c0000000000e1c78] kvmppc_add_revmap_chain+0x88/0x130 [ 7072.864503] LR [c0000000000e2e3c] kvmppc_do_h_enter+0x84c/0x9e0 [ 7072.864566] Call Trace: [ 7072.864594] [c000001e3ffef7e0] [c000001e3ffef830] 0xc000001e3ffef830 (unreliable) [ 7072.864671] [c000001e3ffef830] [c0000000000e2e3c] kvmppc_do_h_enter+0x84c/0x9e0 [ 7072.864751] [c000001e3ffef920] [d00000000b38d878] kvmppc_map_vrma+0x168/0x200 [kvm_hv] [ 7072.864831] [c000001e3ffef9e0] [d00000000b38a684] kvmppc_vcpu_run_hv+0x1284/0x1300 [kvm_hv] [ 7072.864914] [c000001e3ffefb30] [d00000000f465664] kvmppc_vcpu_run+0x44/0x60 [kvm] [ 7072.865008] [c000001e3ffefb60] [d00000000f461864] kvm_arch_vcpu_ioctl_run+0x114/0x290 [kvm] [ 7072.865152] [c000001e3ffefbe0] [d00000000f453c98] kvm_vcpu_ioctl+0x598/0x7a0 [kvm] [ 7072.865292] [c000001e3ffefd40] [c000000000389328] do_vfs_ioctl+0xd8/0x8c0 [ 7072.865410] [c000001e3ffefde0] [c000000000389be4] SyS_ioctl+0xd4/0x130 [ 7072.865526] [c000001e3ffefe30] [c00000000000b760] system_call+0x58/0x6c [ 7072.865644] Instruction dump: [ 7072.865715] e95b2110 793a0020 7b4926e4 7f8a4a14 409e0098 807c000c 786326e4 7c6a1a14 [ 7072.865857] 935e0008 7bbd0020 813c000c 913e000c <93a30008> 93bc000c 48000038 60000000 [ 7072.866001] ---[ end trace 627b6e4bf8080edc ]--- Note that to trigger this, it is necessary to use a recent upstream QEMU (or other userspace that resizes the HPT at CAS time), specify a maximum memory size substantially larger than the current memory size, and boot a guest kernel that does not support HPT resizing. This fixes the problem by resetting the rmap arrays when the old HPT is freed. Fixes: f98a8bf9 ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size") Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
commit e4705715 upstream. Commit 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly", 2017-06-15) added code to read transactional memory (TM) registers but forgot to enable TM before doing so. The result is that if userspace does have live values in the TM registers, a KVM_RUN ioctl will cause a host kernel crash like this: [ 181.328511] Unrecoverable TM Unavailable Exception f60 at d00000001e7d9980 [ 181.328605] Oops: Unrecoverable TM Unavailable Exception, sig: 6 [#1] [ 181.328613] SMP NR_CPUS=2048 [ 181.328613] NUMA [ 181.328618] PowerNV [ 181.328646] Modules linked in: vhost_net vhost tap nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 dns_resolver nfs +fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat +nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables +ip6table_filter ip6_tables iptable_filter bridge stp llc kvm_hv kvm nfsd ses enclosure scsi_transport_sas ghash_generic +auth_rpcgss gf128mul xts sg ctr nfs_acl lockd vmx_crypto shpchp ipmi_powernv i2c_opal grace ipmi_devintf i2c_core +powernv_rng sunrpc ipmi_msghandler ibmpowernv uio_pdrv_genirq uio leds_powernv powernv_op_panel ip_tables xfs sd_mod +lpfc ipr bnx2x libata mdio ptp pps_core scsi_transport_fc libcrc32c dm_mirror dm_region_hash dm_log dm_mod [ 181.329278] CPU: 40 PID: 9926 Comm: CPU 0/KVM Not tainted 4.12.0+ #1 [ 181.329337] task: c000003fc6980000 task.stack: c000003fe4d80000 [ 181.329396] NIP: d00000001e7d9980 LR: d00000001e77381c CTR: d00000001e7d98f0 [ 181.329465] REGS: c000003fe4d837e0 TRAP: 0f60 Not tainted (4.12.0+) [ 181.329523] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> [ 181.329527] CR: 24022448 XER: 00000000 [ 181.329608] CFAR: d00000001e773818 SOFTE: 1 [ 181.329608] GPR00: d00000001e77381c c000003fe4d83a60 d00000001e7ef410 c000003fdcfe0000 [ 181.329608] GPR04: c000003fe4f00000 0000000000000000 0000000000000000 c000003fd7954800 [ 181.329608] GPR08: 0000000000000001 c000003fc6980000 0000000000000000 d00000001e7e2880 [ 181.329608] GPR12: d00000001e7d98f0 c000000007b19000 00000001295220e0 00007fffc0ce2090 [ 181.329608] GPR16: 0000010011886608 00007fff8c89f260 0000000000000001 00007fff8c080028 [ 181.329608] GPR20: 0000000000000000 00000100118500a6 0000010011850000 0000010011850000 [ 181.329608] GPR24: 00007fffc0ce1b48 0000010011850000 00000000d673b901 0000000000000000 [ 181.329608] GPR28: 0000000000000000 c000003fdcfe0000 c000003fdcfe0000 c000003fe4f00000 [ 181.330199] NIP [d00000001e7d9980] kvmppc_vcpu_run_hv+0x90/0x6b0 [kvm_hv] [ 181.330264] LR [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm] [ 181.330322] Call Trace: [ 181.330351] [c000003fe4d83a60] [d00000001e773478] kvmppc_set_one_reg+0x48/0x340 [kvm] (unreliable) [ 181.330437] [c000003fe4d83b30] [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm] [ 181.330513] [c000003fe4d83b50] [d00000001e7700b4] kvm_arch_vcpu_ioctl_run+0x114/0x2a0 [kvm] [ 181.330586] [c000003fe4d83bd0] [d00000001e7642f8] kvm_vcpu_ioctl+0x598/0x7a0 [kvm] [ 181.330658] [c000003fe4d83d40] [c0000000003451b8] do_vfs_ioctl+0xc8/0x8b0 [ 181.330717] [c000003fe4d83de0] [c000000000345a64] SyS_ioctl+0xc4/0x120 [ 181.330776] [c000003fe4d83e30] [c00000000000b004] system_call+0x58/0x6c [ 181.330833] Instruction dump: [ 181.330869] e92d0260 e9290b50 e9290108 792807e3 41820058 e92d0260 e9290b50 e9290108 [ 181.330941] 792ae8a4 794a1f87 408204f4 e92d0260 <7d4022a6> f9490ff0 e92d0260 7d4122a6 [ 181.331013] ---[ end trace 6f6ddeb4bfe92a92 ]--- The fix is just to turn on the TM bit in the MSR before accessing the registers. Fixes: 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly") Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
-
Herbert Xu authored
commit 41cdf7a4 upstream. When authencesn is used together with digest_null a crash will occur on the decrypt path. This is because normally we perform a special setup to preserve the ESN, but this is skipped if there is no authentication. However, on the post-authentication path it always expects the preservation to be in place, thus causing a crash when digest_null is used. This patch fixes this by also skipping the post-processing when there is no authentication. Fixes: 104880a6 ("crypto: authencesn - Convert to new AEAD...") Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
raveendra padasalagi authored
commit efc856ed upstream. SPU driver is dependent on generic MAILBOX API's to communicate with underlying DMA engine driver. So this patch removes BCM_PDC_MBOX "depends on" for SPU driver in Kconfig and adds MAILBOX as dependent module. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
raveendra padasalagi authored
commit a7e6e5d8 upstream. In Broadcom SPU driver, due to missing break statement in spu2_hash_xlate() while mapping SPU2 equivalent SHA3-512 value, -EINVAL is chosen and hence leading to failure of SHA3-512 algorithm. This patch fixes the same. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
-
Frank Rowand authored
commit b4b201d8 upstream. Update the cpp include flags for compiling device tree dts files to match the changes made to the kernel build process in commit d5d332d3 ("devicetree: Move include prefixes from arch to separate directory"). Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Benjamin Coddington authored
commit b7dbcc0e upstream. nfs4_retry_setlk() sets the task's state to TASK_INTERRUPTIBLE within the same region protected by the wait_queue's lock after checking for a notification from CB_NOTIFY_LOCK callback. However, after releasing that lock, a wakeup for that task may race in before the call to freezable_schedule_timeout_interruptible() and set TASK_WAKING, then freezable_schedule_timeout_interruptible() will set the state back to TASK_INTERRUPTIBLE before the task will sleep. The result is that the task will sleep for the entire duration of the timeout. Since we've already set TASK_INTERRUPTIBLE in the locked section, just use freezable_schedule_timout() instead. Fixes: a1d617d8 ("nfs: allow blocking locks to be awoken by lock callbacks") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
NeilBrown authored
commit 442ce049 upstream. Prior to commit ca0daa27 ("NFS: Cache aggressively when file is open for writing"), NFS would revalidate, or invalidate, the file size when taking a lock. Since that commit it only invalidates the file content. If the file size is changed on the server while wait for the lock, the client will have an incorrect understanding of the file size and could corrupt data. This particularly happens when writing beyond the (supposed) end of file and can be easily be demonstrated with posix_fallocate(). If an application opens an empty file, waits for a write lock, and then calls posix_fallocate(), glibc will determine that the underlying filesystem doesn't support fallocate (assuming version 4.1 or earlier) and will write out a '0' byte at the end of each 4K page in the region being fallocated that is after the end of the file. NFS will (usually) detect that these writes are beyond EOF and will expand them to cover the whole page, and then will merge the pages. Consequently, NFS will write out large blocks of zeroes beyond where it thought EOF was. If EOF had moved, the pre-existing part of the file will be over-written. Locking should have protected against this, but it doesn't. This patch restores the use of nfs_zap_caches() which invalidated the cached attributes. When posix_fallocate() asks for the file size, the request will go to the server and get a correct answer. Fixes: ca0daa27 ("NFS: Cache aggressively when file is open for writing") Signed-off-by:
-
Chen-Yu Tsai authored
commit 26cb2be4 upstream. The register for the "new timing mode" also has bit fields for setting output and sample timing phases. According to comments in Allwinner's BSP kernel, the default values are good enough. Keep the default values already in the hardware when setting new timing mode, instead of overwriting the whole register. Fixes: 9a37e53e ("mmc: sunxi: Enable the new timings for the A64 MMC controllers") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Laurent Vivier authored
commit 4fd1bd44 upstream. As for commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"), the call to of_node_put() must be removed from pSeries_reconfig_remove_node(). dlpar_detach_node() and pSeries_reconfig_remove_node() both call of_detach_node(), and thus the node should not be released in both cases. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Helge Deller authored
commit 56188832 upstream. Some machines can't power off the machine, so disable the lockup detectors to avoid this watchdog BUG to show up every few seconds: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1] Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
commit 56008c04 upstream. It's always bothered me that we only disable preemption in copy_user_page around the call to flush_dcache_page_asm. This patch extends this to after the copy. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
John David Anglin authored
commit ae7a609c upstream. Helge noticed that we flush the TLB page in flush_cache_page but not in flush_cache_range or flush_cache_mm. For a long time, we have had random segmentation faults building packages on machines with PA8800/8900 processors. These machines only support equivalent aliases. We don't see these faults on machines that don't require strict coherency. So, it appears TLB speculation sometimes leads to cache corruption on machines that require coherency. This patch adds TLB flushes to flush_cache_range and flush_cache_mm when coherency is required. We only flush the TLB in flush_cache_page when coherency is required. The patch also optimizes flush_cache_range. It turns out we always have the right context to use flush_user_dcache_range_asm and flush_user_icache_range_asm. The patch has been tested for some time on rp3440, rp3410 and A500-44. It's been boot tested on c8000. No random segmentation faults were observed during testing. Signed-off-by:
-
Kai-Heng Feng authored
commit ba92b114 upstream. Mic mute led does not work on HP ProBook 440 G4. We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it. BugLink: https://bugs.launchpad.net/bugs/1705586Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Daniel Dadap authored
commit 74ec1181 upstream. Add codec IDs for several recently released, pending, and historical NVIDIA GPU audio controllers to the patch table, to allow the correct patch functions to be selected for them. Signed-off-by:
Daniel Dadap <ddadap@nvidia.com> Reviewed-by:
Andy Ritger <aritger@nvidia.com> Signed-off-by:
-
Andy Shevchenko authored
commit 610e1ae9 upstream. The commit b56fa687 ("ALSA: fm801: detect FM-only card earlier") rearranged initialization calls, i.e. it makes snd_fm801_chip_init() to be called before we register interrupt handler and set PCI bus mastering. Somehow it prevents FM801-AU to work properly. Thus, partially revert initialization order changed by commit mentioned above. Fixes: b56fa687 ("ALSA: fm801: detect FM-only card earlier") Reported-by:
Émeric MASCHINO <emeric.maschino@gmail.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jan Kara authored
commit 9bcf66c7 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __jfs_set_acl() into jfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: jfs-discussion@lists.sourceforge.net Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
- 27 Jul, 2017 14 commits
-
-
Greg Kroah-Hartman authored
-
Wanpeng Li authored
commit 0e4097c3 upstream. Recent kernels trigger this warning: BUG: using smp_processor_id() in preemptible [00000000] code: 99-trinity/181 caller is debug_smp_processor_id+0x17/0x19 CPU: 0 PID: 181 Comm: 99-trinity Not tainted 4.12.0-01059-g2a42eb95 #1 Call Trace: dump_stack+0x82/0xb8 check_preemption_disabled() debug_smp_processor_id() vtime_delta() task_cputime() thread_group_cputime() thread_group_cputime_adjusted() wait_consider_task() do_wait() SYSC_wait4() do_syscall_64() entry_SYSCALL64_slow_path() As Frederic pointed out: | Although those sched_clock_cpu() things seem to only matter when the | sched_clock() is unstable. And that stability is a condition for nohz_full | to work anyway. So probably sched_clock() alone would be enough. This patch fixes it by replacing sched_clock_cpu() with sched_clock() to avoid calling smp_processor_id() in a preemptible context. Reported-by:
Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1499586028-7402-1-git-send-email-wanpeng.li@hotmail.com [ Prettified the changelog. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Greg Hackmann authored
Commit ff86bf0c ("alarmtimer: Rate limit periodic intervals") sets a minimum bound on the alarm timer interval. This minimum bound shouldn't be applied if the interval is 0. Otherwise, one-shot timers will be converted into periodic ones. This patch is specific to 4.11.y and 4.12.y. Older -stable trees have a slightly different patch, and 4.13-rc2 isn't impacted due to a later refactoring. Fixes: ff86bf0c ("alarmtimer: Rate limit periodic intervals") Reported-by:
Ben Fennema <fennema@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Cc: John Stultz <john.stultz@linaro.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
commit dea1d0f5 upstream. The move of the unpark functions to the control thread moved the BUG_ON() there as well. While it made some sense in the idle thread of the upcoming CPU, it's bogus to crash the control thread on the already online CPU, especially as the function has a return value and the callsite is prepared to handle an error return. Replace it with a WARN_ON_ONCE() and return a proper error code. Fixes: 9cd4f1a4 ("smp/hotplug: Move unparking of percpu threads to the control CPU") Rightfully-ranted-at-by:
-
Thomas Gleixner authored
commit 9cd4f1a4 upstream. Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by:
Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanosSigned-off-by:
-
Gabriel Krisman Bertazi authored
commit 9c75b185 upstream. There are still cases on these platforms where an attempt is made to configure the CDCLK while the power domain is off, like when coming back from a suspend. So the workaround below is still needed. This effectively reverts commit 63ff3044 ("drm/i915: Nuke the VLV/CHV PFI programming power domain workaround"). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170628210605.4994-1-krisman@collabora.co.ukReviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
sagar.a.kamble@intel.com authored
commit 04941829 upstream. OA buffer initialization involves access to HW registers to set the OA base, head and tail. Ensure device is awake while setting these. With this, all oa.ops are covered under RPM and forcewake wakelock. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1498585181-23048-1-git-send-email-sagar.a.kamble@intel.com Fixes: d7965152 ("drm/i915: Enable i915 perf stream for Haswell OA unit") (cherry picked from commit 987f8c44) Signed-off-by:
-
Chris Wilson authored
commit 7581d5ca upstream. Commit fabef825 ("drm/i915: Drop struct_mutex around frontbuffer flushes") adds a dependency to ifbdev->vma when flushing the framebufer, but the checks are only against the existence of the ifbdev->fb and not against ifbdev->vma. This leaves a window of opportunity where we may try to operate on the fbdev prior to it being probed (thanks to asynchronous booting). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101534 Fixes: fabef825 ("drm/i915: Drop struct_mutex around frontbuffer flushes") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170622160211.783-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 15727ed0) Signed-off-by:
-
Chunyu Hu authored
commit db9108e0 upstream. Hit the kmemleak when executing instance_rmdir, it forgot releasing mem of tracing_cpumask. With this fix, the warn does not appear any more. unreferenced object 0xffff93a8dfaa7c18 (size 8): comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s) hex dump (first 8 bytes): ff ff ff ff ff ff ff ff ........ backtrace: [<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280 [<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30 [<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10 [<ffffffff88571ab0>] instance_mkdir+0x90/0x240 [<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70 [<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0 [<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100 [<ffffffff88403857>] do_syscall_64+0x67/0x150 [<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com Fixes: ccfe9e42 ("tracing: Make tracing_cpumask available for all instances") Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Sudeep Holla authored
commit 975e83cf upstream. If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5 (PM / Domains: Re-order initialization of generic_pm_domain_data) Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Philipp Zabel authored
commit 799ee297 upstream. The parallel panel driver should continue to work without having an endpoint linking to an panel in DT for backwards compatibility. With the recent switch to drm_of_find_panel_or_bridge, an absent panel results in a failure with -ENODEV error return code. To restore the old behaviour, ignore the -ENODEV return code. Reported-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Fixes: ebc94461 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Dan Williams authored
commit bbb3be17 upstream. Fix warnings of the form... WARNING: CPU: 10 PID: 4983 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/class/dax/dax12.0' Call Trace: dump_stack+0x63/0x86 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5a/0x80 ? kernfs_path_from_node+0x4f/0x60 sysfs_warn_dup+0x62/0x80 sysfs_do_create_link_sd.isra.2+0x97/0xb0 sysfs_create_link+0x25/0x40 device_add+0x266/0x630 devm_create_dax_dev+0x2cf/0x340 [dax] dax_pmem_probe+0x1f5/0x26e [dax_pmem] nvdimm_bus_probe+0x71/0x120 ...by reusing the namespace id for the device-dax instance name. Now that we have decided that there will never by more than one device-dax instance per libnvdimm-namespace parent device [1], we can directly reuse the namepace ids. There are some possible follow-on cleanups, but those are saved for a later patch to simplify the -stable backport. [1]: https://lists.01.org/pipermail/linux-nvdimm/2016-December/008266.html Fixes: 98a29c39 ("libnvdimm, namespace: allow creation of multiple pmem...") Cc: Jeff Moyer <jmoyer@redhat.com> Reported-by:
Dariusz Dokupil <dariusz.dokupil@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jan Kara authored
commit 6883cd7f upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __reiserfs_set_acl() into reiserfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: reiserfs-devel@vger.kernel.org Signed-off-by:
-
Bjorn Andersson authored
commit d50daa2a upstream. Include the OF-based modalias in the uevent sent when registering SPMI devices, so that user space has a chance to autoload the kernel module for the device. Tested-by:
Rob Clark <robdclark@gmail.com> Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
