- 26 Mar, 2014 25 commits
-
-
Zoltan Kiss authored
Ian made some late comments about the grant mapping series, I incorporated the functional outcomes into this patch: - use callback_param macro to shorten access to pending_tx_info in xenvif_fill_frags() and xenvif_tx_submit() - print an error message in xenvif_idx_unmap() before panic Signed-off-by:
Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zoltan Kiss authored
Ian made some late comments about the grant mapping series, I incorporated the non-functional outcomes into this patch: - typo fixes in a comment of xenvif_free(), and add another one there as well - typo fix for comment of rx_drain_timeout_msecs - remove stale comment before calling xenvif_grant_handle_reset() Signed-off-by:
-
Zoltan Kiss authored
Since the early days TX stops if there isn't enough free pending slots to consume a maximum sized (slot-wise) packet. Probably the reason for that is to avoid the case when we don't have enough free pending slot in the ring to finish the packet. But if we make sure that the pending ring has the same size as the shared ring, that shouldn't really happen. The frontend can only post packets which fit the to the free space of the shared ring. If it doesn't, the frontend has to stop, as it can only increase the req_prod when the whole packet fits onto the ring. This patch avoid using this checking, makes sure the 2 ring has the same size, and remove a checking from the callback. As now we don't stop the NAPI instance on this condition, we don't have to wake it up if we free pending slots up. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: bcm7xxx: workaround updates This patch updates the BCM7xxx internal PHY workaround, this time with defines for the registers we are touching. ==================== Signed-off-by: -
Florian Fainelli authored
The AFE_RX_LP_COUNTER kept the last 3 bits set, which would not properly clear the EEE LPI mode errors bits. Make sure that those bits are set to 0 to ensure the PHY timing is always good even during EEE wake-up. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Writing first to the AFE registers, and then the VCO, RCAL, RC_CAL registers turned out to unveil some spurious MDIO read/write failures which would make the workaround partially applied. The fix is to write first to the VCO, RCAL, RC_CAL registers, and then write to the AFE registers. Signed-off-by:
-
Florian Fainelli authored
Define constants for the various registers used in bcm7xxx_28nm_afe_config_init() to help clarify what this workaround is about. Signed-off-by:
-
Tom Herbert authored
The packet hash can be considered a property of the packet, not just on RX path. This patch changes name of rxhash and l4_rxhash skbuff fields to be hash and l4_hash respectively. This includes changing uses of the field in the code which don't call the access functions. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Joe Perches authored
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Joe Perches authored
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by:
-
Joe Perches authored
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
-
Joe Perches authored
Using addressof then casting to the original type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast.cocci @@ type T; T foo; @@ - (T *)&foo + &foo Signed-off-by:
-
Fabio Estevam authored
Having the kernel to print: "smsc911x: Driver version 2008-10-21" on every boot is not very useful, so remove the print of the driver version. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
With debug enabled we get the following message: smsc911x smsc911x (unregistered net_device): couldn't get clock -2 As the device has not been registered at this point, it is better to use dev_dbg() instead of netdev_dbg(). CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Suggested-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Peter Pan(潘卫平) authored
After commit d4589926 (tcp: refine TSO splits), tcp_nagle_check() does not use parameter mss_now anymore. Signed-off-by:
Weiping Pan <panweiping3@gmail.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: SR-IOV patch series (With the exception of the first patch) This series contains IOV-related patches, where the main changes are related to the driver's IOV-support backbone - it adds a new workqueue for IOV related tasks and removes the vfop mechanism from the driver. Please consider applying this series to `net-next'. ==================== Signed-off-by: -
Yuval Mintz authored
Currently, if a VF's Rx Mode will be configured to support promiscuous mode the PF will comply, causing the VF to actually become promiscuous. This will enable the VF to see all unicast traffic which might be intended for other VMs, which we believe should not be possible. This patch will cause the hypervisor to ignore the VF's request for changes in its Rx mode (other than disabling it), preventing it from becoming promiscuous. Reported-by:
Yoann Juet <yoann.juet@univ-nantes.fr> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
VFs are currently showing port statistics, although they can't really access those - thus all such statistics will always show a value of 0. This patch removes said statistics from the VF's view as to not confuse the user. Signed-off-by:
-
Yuval Mintz authored
Since we now posses a workqueue dedicated for sriov, the paradigm that sriov- related tasks cannot sleep is no longer correct. The VFOP mechanism was the one previously supporting said paradigm - the sriov related tasks were broken into segments which did not require sleep, and the mechanism re-scheduled the next segment whenever possible. This patch remvoes the VFOP mechanism altogether - the resulting code is a much easier to follow code; The segments are gathered into straight-forward functions which sleep whenever neccessary. Signed-off-by:
-
Yuval Mintz authored
The bnx2x sriov mechanisms were done in the bnx2x slowpath workitem which runs on the bnx2x's workqueue; This workitem is also responsible for the bottom half of interrupt handling in the driver, and specifically it also receives FW notifications of ramrod completions, allowing other flows to progress. The original design of the sriov reltaed-flows was based on the notion such flows must not sleep, since their context is the slowpath workitem. Otherwise, we might reach timeouts - those flows may wait for ramrod completion that will never arrive as the workitem wlll not be re-scheduled until that same flow will be over. In more recent time bnx2x started supporting features in which the VF interface can be configured by the tools accessing the PF on the hypervisor. This support created possible races on the VF-PF lock (which is taken either when the PF is handling a VF message or when the PF is doing some slowpath work on behalf of the VF) which may cause timeouts on the VF side and lags on the PF side. This patch changes the scheme - it creates a new workqueue for sriov related tasks and moves all handling currently done in the slowpath task into the the new workqueue. Signed-off-by:
-
Yuval Mintz authored
This adds support in a new management feature which needs the driver versions (bnx2x, bnx2fc and bnx2i) loaded for each interface. Signed-off-by:
-
Thomas Gleixner authored
The module is about to go away. Make sure everything is stopped safely before we pull the plug. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: atm <linux-atm-general@lists.sourceforge.net> Cc: netdev <netdev@vger.kernel.org> Signed-off-by:
-
Thomas Gleixner authored
The device is about to vanish. So we need to make sure that the timer is completely stopped and the callback is not running on another CPU. Signed-off-by:
-
Matan Barak authored
The code which is dealing with SRIOV alias GUIDs in the mlx4 IB driver has some logic which operated according to the maximal possible active functions (PF + VFs). After the single port VFs code integration this resulted in a flow of false-positive warnings going to the kernel log after the PF driver started the alias GUID work. Fix it by referring to the actual number of functions. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by:
-
- 25 Mar, 2014 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of wireless updates intended for 3.15! For the mac80211 bits, Johannes says: "This has a whole bunch of bugfixes for things that went into -next previously as well as some other bugfixes I didn't want to rush into 3.14 at this point. The rest of it is some cleanups and a few small features, the biggest of which is probably Janusz's regulatory DFS CAC time code." For the Bluetooth bits, Gustavo says: "One more pull request to 3.15. This is mostly and bug fix pull request, it contains several fixes and clean up all over the tree, plus some small new features." For the NFC bits, Samuel says: "This is the NFC pull request for 3.15. With this one we have: - Support for ISO 15693 a.k.a. NFC vicinity a.k.a. Type 5 tags. ISO 15693 are long range (1 - 2 meters) vicinity tags/cards. The kernel now supports those through the NFC netlink and digital APIs. - Support for TI's trf7970a chipset. This chipset relies on the NFC digital layer and the driver currently supports type 2, 4A and 5 tags. - Support for NXP's pn544 secure firmare download. The pn544 C3 chipsets relies on a different firmware download protocal than the C2 one. We now support both and use the right one depending on the version we detect at runtime. - Support for 4A tags from the NFC digital layer. - A bunch of cleanups and minor fixes from Axel Lin and Thierry Escande." For the iwlwifi bits, Emmanuel says: "We were sending a host command while the mutex wasn't held. This led to hard-to-catch races." And... "I have a fix for a "merge damage" which is not really a merge damage: it enables scheduled scan which has been disabled in wireless.git. Since you merged wireless.git into wireless-next.git, this can now be fixed in wireless-next.git. Besides this, Alex made a workaround for a hardware bug. This fix allows us to consume less power in S3. Arik and Eliad continue to work on D0i3 which is a run-time power saving feature. Eliad also contributes a few bits to the rate scaling logic to which Eyal adds his own contribution. Avri dives deep in the power code - newer firmware will allow to enable power save in newer scenarios. Johannes made a few clean-ups. I have the regular amount of BT Coex boring stuff. I disable uAPSD since we identified firmware bugs that cause packet loss. One thing that do stand out is the udev event that we now send when the FW asserts. I hope it will allow us to debug the FW more easily." Also included is one last iwlwifi pull for a build breakage fix... For the Atheros bits, Kalle says: "Michal now did some optimisations and was able to improve throughput by 100 Mbps on our MIPS based AP135 platform. Chun-Yeow added some workarounds to be able to better use ad-hoc mode. Ben improved log messages and added support for MSDU chaining. And, as usual, also some smaller fixes." Beyond that... Andrea Merello continues his rtl8180 refactoring, in preparation for a long-awaited rtl8187 driver. We get a new driver (rsi) for the RS9113 chip, from Fariya Fatima. And, of course, we get the usual round of updates for ath9k, brcmfmac, mwifiex, wil6210, etc. as well. ==================== Signed-off-by: -
David S. Miller authored
This fixes: drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_dealloc_action’: drivers/net/xen-netback/netback.c:1573:8: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long int’ [-Wformat=] Signed-off-by: -
Zoltan Kiss authored
This reverts commit e9275f5e. This commit is the last in the netback grant mapping series, and it tries to do more aggressive aggreagtion of unmap operations. However practical use showed almost no positive effect, whilst with certain frontends it causes significant performance regression. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/net-nextDavid S. Miller authored
Eric W. Biederman says: ==================== Using dev_kfree/consume_skb_any for functions called in multiple contexts These changes are a result of walking through the network drivers supporting netpoll and verifying the code paths that netpoll can cause to be called in hard irq context use an appropriate flavor of kfree_skb. Either dev_kfree_skb_any or dev_consume_skb_any. Since my last pass at this I have become aware of the small differences between dev_kfree_skb_any and dev_consume_skb_any. net/core/drop_monitor.c reports the dev_kfree_skb_any as a drop and while being quite about the second. With the weird twist that dev_kfree_skb is unintuitively consume_skb. As netpoll now calls the napi poll function with budget == 0, pieces of a drivers the napi poll function that don't run when budget == 0 have been ignored. The most interesting change is to the atl1c which tried unsuccesfully to tell one of it's functions which context it is called in so that it could call dev_kfree_skb_irq or dev_kfree_skb as appropriate. I have just removed the extra parameter and called dev_consume_skb_any. At 54 separate changes I will post each change as a separate patch (so they can be reviewed) but for general sanity sake I have gathered them all into a git branch for easy acces. ==================== Acked-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fix frm Bruce Fields: "J R Okajima sent this early and I was just slow to pass it along, apologies. Fortunately it's a simple fix" * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: nfsd: fix lost nfserrno() call in nfsd_setattr()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "These four commits are obvious fixes (a couple of fdget_pos()-related ones from Eric Biggers, prepend_name() fix, missing checks for false negatives from __lookup_mnt() in fs/namei.c)" For now I'm pulling just the four obvious fixes, there's another four pending in Al's 'for-linus' branch wrt the mnt_hash list that were more involved. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: rcuwalk: recheck mount_lock after mountpoint crossing attempts make prepend_name() work correctly when called with negative *buflen vfs: Don't let __fdget_pos() get FMODE_PATH files vfs: atomic f_pos access in llseek()
-
Eric W. Biederman authored
Replace kfree_skb with dev_kfree_skb_any in vlan_insert_tag as vlan_insert_tag can be called from hard irq context (netpoll) and from other contexts. dev_kfree_skb_any is used as vlan_insert_tag only frees the skb if the skb can not be modified to insert a tag, in which case vlan_insert_tag drops the skb. Signed-off-by:"Eric W. Biederman" <ebiederm@xmission.com>
-
Eric W. Biederman authored
Replace dev_kfree_skb with dev_kfree_skb_any in start_xmit which can be called in hard irq and other contexts. start_xmit only frees skbs that it is dropping. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_kfree_skb_any in cvm_oct_xmit_pow which can be called in hard irq and other contexts, on the code paths that drop packets. Replace dev_kfree_skb with dev_consume_skb_any in cvm_oct_xmit_pow which can be called in hard irq and other contexts, on the code path where the packet is transmitted successfully. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_consume_skb_any in wl_send and wl_send_dma which can be called in hard irq and other contexts, on the code paths where the skb was transmitted successfully. Replace dev_kfree_skb with dev_kfree_skb_any in wl_send_dmay which can be called in hard irq and other contexts, on the code path where a skb is dropped. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_kfree_skb_any in xennet_start_xmit which can be called in hard irq and other contexts. xennet_start_xmit only fress skbs which it drops. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_kfree_skb_any in vmnet3_tx_xmit which can be called in hard irq and other contexts. vmnet3_tx_xmit only frees skbs that it has dropped. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_consume_skb_any in xemaclite_send which can be called in hard irq and other contexts. xemacelite_send only frees skbs that it has successfully transmitted. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_kfree_skb_any in velocity_xmit that can be called in hard irq and other contexts. Packets are freed and dropped in velocity_xmit when they are too fragmented and can not be linearized. Signed-off-by: -
Eric W. Biederman authored
Replace dev_kfree_skb with dev_kfree_skb_any in rhine_start_tx which can be called in hard irq and other contexts. Packets are only freed in rhine_start_tx if they are dropped. Replace dev_kfree_skb with dev_consume_skb_any in rhine_tx that can be called in hard irq and other contexts. rhine_tx handles successfully transmitted packets. Signed-off-by:
-
