- 11 Jan, 2016 5 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Last minute fixes for v4.4 A few final fixes for v4.4, the main one being the two patches to the new Sky Lake drivers which fix a previous incorrect fix that went in during an earlier -rc. # gpg: Signature made Wed 06 Jan 2016 17:12:57 GMT using RSA key ID 5D5487D0 # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB # Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
-
Arnd Bergmann authored
A recent rework removed the only user of the hdac_hdmi_query_pin_connlist function, so we now get a warning when building the hdac_hdmi driver: hdac_hdmi.c:313:12: warning: 'hdac_hdmi_query_pin_connlist' defined but not used [-Wunused-function] This removes the function, which makes the file build cleanly again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 15b91447 ("ASoC: hdac_hdmi: Use list to add pins and converters") Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Jan, 2016 12 commits
-
-
Jeeja KP authored
This patch adds pcm capability to support Resume. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
On suspend the link register are lost so we need to reconfigure them in resume. This patch adds the reconfiguration of the link register in trigger resume. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
Use the DMA resume capability to resume the DMA position when stream is suspended/resumed. In suspend we save the position and when stream is resumed the stream needs to be started from the position when the stream was suspended using the new DMA resume capabilities Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
In active suspend, any HDA interrupt should wake the system. When device enters active suspend, we need to enable HDA controller interrupt as wake source. Similarly disable HDA controller interrupt as wake source when exiting active suspend. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
When device enters active suspend, we should turn off the links as they are not in use. Similarly we need to bring back links when we exit active suspend. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dharageswari.R authored
Per HW recommendation, SW shall clear the CGCTL.MISCBDCGE and set it back once data is transferred. So clear this when we get the IPC and track using a driver flag, and set back on closure Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jayachandran B authored
MISCBDCGE is a new register for Misc Backbone clock gate control which is useful to control while resetting the link and ensuring controller is in required state so add API to control it HW recommends that we reset with CGCTL.MISCBDCGE disabled, so add that while doing init chip and reset sequence. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'topic/hdac' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Vinod Koul authored
We have an API for powering down all links, we need a similar one for powering up links, so add for power up as well Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jayachandran B authored
HW recommends 180us for worst case values for link power up delay, so change the current delay value from 50 (150us) to 150 (450us) Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
A stream is by default in coupled mode, in DSP operation we move it to decoupled mode. On cleanup HW expects that we leave it back to default state so couple the DMA on cleanup. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
Skylake sports new capability of DMA resume, DRSM where we can resume the DMA. This capability is defined by presence of AZX_DRSM_CAP_ID. If this capability is present, we use this capability. So we add: snd_hdac_ext_stream_drsm_enable() - DMA resume caps snd_hdac_ext_stream_set_dpibr() - set the DMA position snd_hdac_ext_stream_set_lpib() - set the lpib Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Jan, 2016 3 commits
-
-
Vinod Koul authored
The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Cc: <stable@vger.kernel.org> Tested-by: Ashish Panwar <ashish.panwar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Subhransu S. Prusty authored
Future platforms may have a different set of pins/converters. So use lists to add pins and converters based on enumeration. Also it may be required to connect any converter to any pin dynamically as per different use cases (for example DP is connected to pin 6 on skylake board). So this will help in dynamically select and route. Fix the dai map as well to use the pin/cvt from list. Not enabling all dai maps for now. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Subhransu S. Prusty authored
It is possible that some pin widget may return with no converter connected. So don't throw error if none are found to be connected. Instead print a warning and continue. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Jan, 2016 1 commit
-
-
Charles Keepax authored
We don't want to use a bypassed write in wm5110_clear_pga_volume, we might disable the DRE whilst the CODEC is powered down. A normal regmap_write will always go to the hardware (when not on cache_only) even if the written value matches the cache. As using a normal write will still achieve the desired behaviour of bring the cache and hardware in sync, this patch updates the function to use a normal write, which avoids issues when the CODEC is powered down. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
- 05 Jan, 2016 16 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Subhransu S. Prusty authored
commit 3c83ac23 ("ASoC: hdac_hdmi: check error return") fixes the static checker warning reported by Dan Carpenter: sound/soc/codecs/hdac_hdmi.c:416 hdac_hdmi_parse_and_map_nid() warn: unsigned 'hdac->num_nodes' is never less than zero. But it doesn't fix the issue completely. It's also a failure if no sub nodes found for an afg node. So modify the return condition appropriately. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'fix/intel' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Jorge Fernandez Monteagudo authored
The BIOS for the HP ElitePad 1000 G2 uses an unexpected HID, (INTCCFFD), add it to the white list of knowns HIDs. Signed-off-by: Jorge Fernandez Monteagudo <jorgefm@cirsa.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit Tested on Asus T100TAF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Codec name is hard-coded in machine driver, pass information from actual ACPI HID to help support BIOS variations Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
based on bytcr-rt5640 with changes only on codec side Quirk logic is kept as placeholder. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The commit 95f09801 "ASoC: Intel: Move apci find machine routines" introduced a regression in ACPI probe of the DPCM driver. Fix by conditionally compiling sst-acpi when the DPCM driver is not selected Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Sound is noisy when using BCLK as reference, enable ASRC in rt5640 codec Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'topic/rt5640' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Jack Yu authored
Signed-off-by: Jack Yu <jack.yu@realtek.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
This provide the fix for firmware memory by freeing the pointer in driver remove where it is safe to do so Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
This reverts commit 87b5ed8e ("ASoC: Intel: Skylake: fix memory leak") as it causes regression on Skylake devices The SKL drivers can be deferred probe. The topology file based widgets can have references to topology file so this can't be freed until card is fully created, so revert this patch for now [ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc [ 66.690735] IP: [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0 [ 66.702925] Oops: 0000 [#1] PREEMPT SMP [ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62 [ 66.778869] Hardware name: Intel Corporation Skylake Client platform [ 66.793201] Workqueue: deferwq deferred_probe_work_func [ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000 [ 66.807692] RIP: 0010:[<ffffffff806c94dd>] [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286 [ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe [ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc [ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff [ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc [ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000 [ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0 [ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.903052] Stack: [ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000 [ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918 [ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940 [ 66.930855] Call Trace: [ 66.933646] [<ffffffff806cb1db>] string.isra.4+0x3b/0xd0 [ 66.939793] [<ffffffff806ccbd6>] vsnprintf+0x116/0x540 [ 66.945742] [<ffffffff806d02f0>] kvasprintf+0x40/0x80 [ 66.951591] [<ffffffff806d0370>] kasprintf+0x40/0x50 [ 66.957359] [<ffffffffa00c085f>] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core] [ 66.966771] [<ffffffff8057dd1e>] ? __kmalloc+0x16e/0x2a0 [ 66.972931] [<ffffffffa00c0dab>] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core] [ 66.981857] [<ffffffffa00be8c0>] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core] [ 67.007828] [<ffffffffa00b92ed>] soc_probe_component+0x23d/0x360 [snd_soc_core] [ 67.016244] [<ffffffff80b14e69>] ? mutex_unlock+0x9/0x10 [ 67.022405] [<ffffffffa00ba02f>] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core] [ 67.031329] [<ffffffff8049eeb2>] ? debug_mutex_init+0x32/0x40 [ 67.037973] [<ffffffffa00baa92>] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core] [ 67.046619] [<ffffffffa00c8b54>] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] [ 67.055539] [<ffffffffa01c303b>] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286] [ 67.064292] [<ffffffff808aa887>] platform_drv_probe+0x37/0x90 Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Jan, 2016 1 commit
-
-
Geliang Tang authored
Use dev_to_hdac_dev() and to_ehdac_device() instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Jan, 2016 2 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS build fix from Ralf Baechle: "Fix a makefile issue resulting in build breakage with older binutils. This has sat in -next for a few days, testers and buildbot are happy with it, too though if you are going for another -rc that'd certainly help ironing out a few more issues" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: VDSO: Fix build error with binutils 2.24 and earlier
-