- 21 Feb, 2016 2 commits
-
-
Cristina Moraru authored
Add ABI file documenting hmc5843 non-standard attributes meas_conf and meas_conf_available for bias current configuration. Signed-off-by:
Cristina Moraru <cristina.moraru09@gmail.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Cristina Moraru authored
Change static attribute meas_conf for bias current configuration to channel attribute in_magn_meas_conf and also add in_magn_meas_conf_available attribute to view available configurations. This patch solves functionality bug: driver was using same function hmc5843_set_measurement_configuration for setting bias current config for all device types but the function was returning -EINVAL for any setting >= 0x03 although, for sensor HMC5983, value 3 is valid. API for setting bias measurement configuration: normal - Normal measurement configuration (default): In normal measurement configuration the device follows normal measurement flow. Pins BP and BN are left floating and high impedance. positivebias - Positive bias configuration: In positive bias configuration, a positive current is forced across the resistive load on pins BP and BN. negativebias - Negative bias configuration. In negative bias configuration, a negative current is forced across the resistive load on pins BP and BN. disabled - Only available on HMC5983. Magnetic sensor is disabled. Temperature sensor is enabled. Signed-off-by:
-
- 19 Feb, 2016 1 commit
-
-
Matt Ranostay authored
switch from using REGCACHE_FLAT to REGCACHE_RBTREE so initial hw values are read from device. This also allows some volatile ranges to be dropped. Note that REGCACHE_FLAT is intended only for very low lag cases so doesn't do nice things like read initial values from the device. Hence this change. Signed-off-by:
Matt Ranostay <mranostay@gmail.com> Signed-off-by:
-
- 17 Feb, 2016 5 commits
-
-
William Breathitt Gray authored
This patch fixes a few minor typos in the documentation comments for the scan_type member of the iio_event_spec structure. The sign member name was improperly capitalized as "Sign" in the comments. The storagebits member name was improperly listed as "storage_bits" in the comments. The endianness member entry in the comments was moved after the repeat member entry in order to maintain consistency with the actual struct iio_event_spec layout. Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The ms5611 driver started using the IIO_TRIGGERED_BUFFER infrastructure which in turn depend on IIO_BUFFER, and it produces a build error now if that is not enabled: warning: (... && MS5611 && ...) selects IIO_TRIGGERED_BUFFER which has unmet direct dependencies (IIO && IIO_BUFFER) buffer/industrialio-triggered-buffer.c: In function 'iio_triggered_buffer_setup': buffer/industrialio-triggered-buffer.c:58:2: error: implicit declaration of function 'iio_device_attach_buffer' [-Werror=implicit-function-declaration] pressure/ms5611_core.c: In function 'ms5611_trigger_handler': pressure/ms5611_core.c:193:2: error: implicit declaration of function 'iio_push_to_buffers_with_timestamp' [-Werror=implicit-function-declaration] This adds the second select. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 713bbb4e ("iio: pressure: ms5611: Add triggered buffer support") Acked-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Arnd Bergmann authored
The newly added afe4404 driver implements suspend/resume using the SIMPLE_DEV_PM_OPS() macro, which leaves out references to the actual functions when CONFIG_PM is disabled, causing a harmless warning: health/afe4404.c:509:12: error: 'afe4404_suspend' defined but not used health/afe4404.c:530:12: error: 'afe4404_resume' defined but not used This marks the functions as __maybe_unused so we don't get those warnings. Signed-off-by:
-
Arnd Bergmann authored
The newly added afe4403 driver implements suspend/resume using the SIMPLE_DEV_PM_OPS() macro, which leaves out references to the actual functions when CONFIG_PM is disabled, causing a harmless warning: health/afe4403.c:509:12: error: 'afe4403_suspend' defined but not used health/afe4403.c:530:12: error: 'afe4403_resume' defined but not used This marks the functions as __maybe_unused so we don't get those warnings. Signed-off-by:
-
Arnd Bergmann authored
The newly added afe4403 driver uses the regmap facility to abstract the I2C and SPI access. However, it fails to ensure that regmap_spi is actually present: drivers/iio/built-in.o: In function `afe4403_probe': :(.text+0x9bf8): undefined reference to `__devm_regmap_init_spi' This adds a Kconfig select statement like the afe4404 I2C driver has. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
- 15 Feb, 2016 32 commits
-
-
Shraddha Barke authored
Coherent mapping guarantees that the device and CPU are in sync. Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Janani Ravichandran authored
Fix comments to use trailing */ on separate lines. Signed-off-by:
Janani Ravichandran <janani.rvchndrn@gmail.com> Signed-off-by:
-
Janani Ravichandran authored
Add missing blank line after declaration of variables. Issue found by checkpatch. Signed-off-by:
-
Janani Ravichandran authored
Improve readability by fitting all parts of the function header on the same line. Signed-off-by:
-
Amitoj Kaur Chawla authored
The return value of devm_kzalloc on failure of allocation of memory should be -ENOMEM and not -1. Found using Coccinelle. A simplified version of the semantic patch used is: //<smpl> @@ expression *e; @@ e = devm_kzalloc(...); if (e == NULL) { ... return - -1 + -ENOMEM ; } //</smpl> The single call site does not perform any checks on the return value, hence no change is required at the call site. Signed-off-by:Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
With concurrency managed workqueues, use of dedicated workqueues can be replaced by using system_wq. Drop mux_rx_wq by using system_wq. Since there is only one work item per mux_dev and different mux_devs do not need to be ordered, increase of concurrency level by switching to system_wq should not break anything. cancel_work_sync() is used to ensure that work is not pending or executing on any CPU. Lastly, since all devices are suspended, which shutdowns the work item before the driver can be unregistered, it is guaranteed that no work item is pending or executing by the time exit path runs. Signed-off-by:
-
Tomás Tormo authored
Modify the nvec_write_sync function to return the error code instead of the received message. The received message is now returned as an output parameter. Signed-off-by:
Tomás Tormo <tomas.tormo@gmail.com> Signed-off-by:
-
Aaro Koskinen authored
Support official DT bindings alongside with the deprecated ones. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
Support fixed-link PHYs. This allows to remove some of the board-specific link cvmx_helper code in the future. Signed-off-by:
-
Janani Ravichandran authored
Use trailing */ on a separate line when it is a block comment. This patch fixes the last of the checkpatch warnings for the file. Signed-off-by:
-
Laura Garcia Liebana authored
Align arguments with the open parenthesis. Checkpatch found this issue. Signed-off-by:
Laura Garcia Liebana <nevola@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Laura Garcia Liebana authored
Avoid the use of multiple blank lines. Checkpatch found this issue. Signed-off-by:
-
Laura Garcia Liebana authored
Avoid the use of multiple assignments in a single line. Checkpatch found this issue. Signed-off-by:
-
Bhumika Goyal authored
Remove function ieee80211_wep_null from the file as is it blank and remove its declaration from the header file. Also remove its function call as it is of no use calling this function. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
The headers <asm/uaccess.h>,<asm/atomic.h>,<asm/atomic.h> should not be directly included so replace them. Warning generated by checkpatch.pl. Signed-off-by:
-
Janani Ravichandran authored
This patch clears the checkpatch warning about suspect code indent for conditional statements in the file. Signed-off-by:
-
Janani Ravichandran authored
This patch removes commented out code in the file. Signed-off-by:
-
Janani Ravichandran authored
Remove unnecessary braces in if...else statements where both branches have a single statement each. Signed-off-by:
-
Bhumika Goyal authored
Remove the commented out places where macros PlatformAcquireSpinLock and PlatformReleaseSpinLock are called as these macros are no longer used. Signed-off-by:
-
Bhumika Goyal authored
The macros PlatformAcquireSpinLock and PlatformReleaseSpinLock are not used anywhere so remove them. Used grep to find occurences. Signed-off-by:
-
Joseph Bisch authored
Since the variable ret is set at the beginning of the function and never changes its value, we can just return the value it was set to. Found using coccinelle with misc/returnvar.cocci. Signed-off-by:
Joseph Bisch <joseph.bisch@gmail.com> Signed-off-by:
-
Rakhi Sharma authored
WARNING: Comparisons should place the constant on the right side of the test Fixed this warning by placing the constant on right side. Signed-off-by: Rakhi Sharma <rakhish1994@gmail.com>- Signed-off-by: -
Bhumika Goyal authored
In this file,function names are otherwise used as pointers without &. Found using coccinelle. // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: -
Bhumika Goyal authored
In this file,function names are otherwise used as pointers without &. Found using coccinelle. // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: -
Bhumika Goyal authored
In this file,function names are otherwise used as pointers without &. Found using coccinelle. // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: -
Janani Ravichandran authored
Constants should be placed on the right hand side of comparisons. This issue was identified by checkpatch. Signed-off-by:
-
Bhumika Goyal authored
The function vfree test whether the argument is NULL and return immediately. SO NULL test is not needed before vfree. Signed-off-by:
-
Bhumika Goyal authored
The function rtw_free_netdev test whether its argument is NULL and return immediately. So NULL test before this function is not needed. Signed-off-by:
-
Janani Ravichandran authored
This patch changes some C99-style "//..." comments to C89 "/* ... */" style. Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove driver specific macro msleep_interruptible_rsl as it has been replaced by a direct call to msleep_interruptible in the single instance referencing it. Signed-off-by:
Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
staging: rtl8192u: ieee80211: ieee80211_softmac: Replace driver specific macro msleep_interruptible_rsl Replace driver specific msleep_interruptible_rsl macro with direct call to msleep_interruptible. Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove driver specific macro MSECS since all instances of this macro have been replaced by direct calls to msecs_to_jiffies(). Signed-off-by:
-
