- 01 Mar, 2006 4 commits
-
-
Jamie Wellnitz authored
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly Signed-off-by:
Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Jamie Wellnitz authored
Remove unused SLI_IOCB_HIGH_PRIORITY Signed-off-by:
-
Jamie Wellnitz authored
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba Signed-off-by:
-
Jamie Wellnitz authored
Remove unused prototypes from lpfc_crtn.h Signed-off-by:
-
- 28 Feb, 2006 26 commits
-
-
Brian King authored
Fixes scsi to handle device_add failure in scsi_alloc_target. Without this patch, if this call were to fail, we can oops when we free the target. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
James Bottomley authored
In order to use the new execute_in_process_context() API, you have to provide it with the work storage, which I do in SCSI in scsi_device and scsi_target, but which also means that we can no longer queue up the target reaps, so instead I moved the target to a state model which allows target_alloc to detect if we've received a dying target and wait for it to be gone. Hopefully, this should also solve the target namespace race. Signed-off-by: -
James Bottomley authored
We have several points in the SCSI stack (primarily for our device functions) where we need to guarantee process context, but (given the place where the last reference was released) we cannot guarantee this. This API gets around the issue by executing the function directly if the caller has process context, but scheduling a workqueue to execute in process context if the caller doesn't have it. Signed-off-by: -
Mike Christie authored
When the locking was changed in the eh code ips_eh_reset was changed so that it was a wraper around __ips_eh_reset and all ips_eh_reset does is grab the host lock and then calls __ips_eh_reset. In the queuecommand, ips_queue is called with the host_lock held so if it calls ips_eh_reset we will have a problem. This patch just has ips_queue call __ips_eh_reset. Patch is only compile tested. I do not have the HW. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Hammer, Jack <Jack_Hammer@adaptec.com> Signed-off-by:
-
Al Viro authored
Regardless what mode page was asked for, Initio INIC-14x0 and INIC-2430 always return page 6 without mode page headers. Try to recognise this as a special case in scsi_mode_sense and setting the mode sense headers accordingly. Signed-off-by:
Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
-
Matthew Wilcox authored
Fix a bug where we would consume one byte too many in the message printing code. Add support for 256-byte long messages. Add support for the Modify Bidirectional Data Pointer message. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Alan Stern authored
Some non-standard SCSI targets or protocols, such as USB UFI, report "no LUN present" by setting the Peripheral Device Type to 0x1f and the Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY response. This patch (as650b) adds a new target flag and code to accomodate such targets. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Christoph Hellwig authored
On Tue, Jan 31, 2006 at 06:20:18PM +0100, Christoph Hellwig wrote: > switch eh_sem to a completion. due to wait_for_completion_timeout this > also nicely simplifies the code. Unfortunately it's untested, so if > someone with the hardware could give it a try that would be nice. Once > it works the same thing can be applied to aic79xx. New version that switches to the common onstack completion and just a pointer in the platform_data struct idiom. This gets rid of all the flags fiddling. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by:
Salyzyn, Mark <mark_salyzyn@adaptec.com> Signed-off-by:
-
James Bottomley authored
Signed-off-by: -
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Adds support to retrieve the enclosure and bay identifiers. This patch is from Eric with minor modifications from me, rewritten from a buggy patch of mine, based on the earlier CSMI implementation from Eric.. Signed-off-by:
-
Ralf Baechle authored
Using plain integer as NULL pointer. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Matthew Wilcox authored
Almost all the output from spi_print_msg() has a trailing space. This patch fixes up the three cases that don't. Signed-off-by:
-
Matthew Wilcox authored
Introduce new helpers: - spi_populate_width_msg() - spi_populate_sync_msg() - spi_populate_ppr_msg() and use them in drivers which already enable the SPI transport. Signed-off-by:
-
Matthew Wilcox authored
Delete unused NAME53C definition Remove use of the M_* constants; use the common SCSI constants instead Translate some remaining German Add a missing changelog entry Signed-off-by:
-
Matthew Wilcox authored
show_spi_transport_period_helper() doesn't need the class_device parameter Signed-off-by:
-
Matthew Wilcox authored
in __scsi_add_device, sdev may be uninitialised if scsi_host_scan_allowed() returns false. Fix by initialising at the top of the routine. Also rely on the fact that scsi_probe_and_add_lun() only actually fills in the sdev pointer if the SCSI_SCAN_LUN_PRESENT case (so no need to check the return value). Signed-off-by: -
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Adrian Bunk authored
This patch makes two needlessly global functions static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Linas Vepstas authored
Various PCI bus errors can be signaled by newer PCI controllers. This patch adds the PCI error recovery callbacks to the IPR SCSI device driver. The patch has been tested, and appears to work well. Signed-off-by:
Linas Vepstas <linas@linas.org> Signed-off-by:
-
Moore, Eric authored
Removes wierd humor, and bad language printk in mptlan. Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Signed-off-by:
-
Greg KH authored
As devfs has been disabled from the kernel tree for a number of months now (5 to be exact), here's a patch against 2.6.16-rc1-git1 that removes support for it from the SCSI subsystem. The patch also removes the scsi_disk devfs_name field as it's no longer needed. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Matthew Wilcox authored
Wrap these two comments at 80 columns Signed-off-by:
-
Jes Sorensen authored
Change the core SCSI code to use kzalloc rather than kmalloc+memset where possible. Signed-off-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
-
- 27 Feb, 2006 7 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit 9ec4b1f3 made kprobes not compile without module support, so just make that clear in the Kconfig file. Also, since it's marked EXPERIMENTAL, make that dependency explicit too. Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
David S. Miller authored
The change to kernel/sched.c's init code to use for_each_cpu() requires that the cpu_possible_map be setup much earlier. Set it up via setup_arch(), constrained to NR_CPUS, and later constrain it to max_cpus in smp_prepare_cpus(). This fixes SMP booting on sparc64. Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: -
James Bottomley authored
Commit 9c869eda broke voyager again rather subtly because it already had its own topology exporting functions, so now each CPU gets registered twice. I think we can actually use the generic ones, so I don't propose reverting it. The attached should eliminate the voyager topology functions in favour of the generic ones. I also added a define to ensure voyager is never hotplug CPU (we don't have the support in the SMP harness). Signed-off-by:
-
Brian Magnuson authored
The commit e2c03888 added setup_additional_cpus to setup.c but this is only defined if CONFIG_HOTPLUG_CPU is set. This patch changes the #ifdef to reflect that. Signed-off-by:
Brian Magnuson <magnuson@rcn.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
- 26 Feb, 2006 3 commits
-
-
Andi Kleen authored
RTC_IRQP_SET/RTC_EPOCH_SET don't take a pointer to an argument, but the argument itself. This actually simplifies the code and makes it work. Signed-off-by:
-
Andi Kleen authored
The previous experiment for using apicmaintimer on ATI systems didn't work out very well. In particular laptops with C2/C3 support often don't let it tick during idle, which makes it useless. There were also some other bugs that made the apicmaintimer often not used at all. I tried some other experiments - running timer over RTC and some other things but they didn't really work well neither. I rechecked the specs now and it turns out this simple change is actually enough to avoid the double ticks on the ATI systems. We just turn off IRQ 0 in the 8254 and only route it directly using the IO-APIC. I tested it on a few ATI systems and it worked there. In fact it worked on all chipsets (NVidia, Intel, AMD, ATI) I tried it on. According to the ACPI spec routing should always work through the IO-APIC so I think it's the correct thing to do anyways (and most of the old gunk in check_timer should be thrown away for x86-64). But for 2.6.16 it's best to do a fairly minimal change: - Use the known to be working everywhere-but-ATI IRQ0 both over 8254 and IO-APIC setup everywhere - Except on ATI disable IRQ0 in the 8254 - Remove the code to select apicmaintimer on ATI chipsets - Add some boot options to allow to override this (just paranoia) In 2.6.17 I hope to switch the default over to this for everybody. Signed-off-by:
-
Andi Kleen authored
SMP time selection originally ran after all CPUs were brought up because it needed to know the number of CPUs to decide if it needs an MP safe timer or not. This is not needed anymore because we know present CPUs early. This fixes a couple of problems: - apicmaintimer didn't always work because it relied on state that was set up time_init_gtod too late. - The output for the used timer in early kernel log was misleading because time_init_gtod could actually change it later. Now always print the final timer choice Signed-off-by:
-
