- 09 Aug, 2019 8 commits
-
-
Roman Mashak authored
Update TDC tests with cases varifying ability of TC to install or delete batches of skbedit actions. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: ca9b0e27 ("pkt_action: add new action skbedit") Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/dsa/sja1105/sja1105_main.c: In function sja1105_fdb_dump: drivers/net/dsa/sja1105/sja1105_main.c:1226:14: warning: variable tx_vid set but not used [-Wunused-but-set-variable] drivers/net/dsa/sja1105/sja1105_main.c:1226:6: warning: variable rx_vid set but not used [-Wunused-but-set-variable] They are not used since commit 6d7c7d94 ("net: dsa: sja1105: Fix broken learning with vlan_filtering disabled") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
YueHaibing authored
As commit 30d8177e ("bonding: Always enable vlan tx offload") said, we should always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Now if encapsulation protocols like VXLAN is used, skb->encapsulation may be set, then the packet is passed to vlan device which based on bonding device. However in netif_skb_features(), the check of hw_enc_features: if (skb->encapsulation) features &= dev->hw_enc_features; clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results in same issue in commit 30d8177e like this: vlan_dev_hard_start_xmit -->dev_queue_xmit -->validate_xmit_skb -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared -->validate_xmit_vlan -->__vlan_hwaccel_push_inside //skb->tci is cleared ... --> bond_start_xmit --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34 --> __skb_flow_dissect // nhoff point to IP header --> case htons(ETH_P_8021Q) // skb_vlan_tag_present is false, so vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), //vlan point to ip header wrongly Fixes: b2a103e6 ("bonding: convert to ndo_fix_features") Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Ivan Khoronzhuk authored
In error case, all entries should be freed from the sched list before deleting it. For simplicity use rcu way. Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler") Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Stephen Hemminger authored
IPX is no longer supported, but the example in the documentation might useful. Replace it with IPv6. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Stephen Hemminger authored
Both IPX and TR have not been supported for a while now. Remove them from the /proc/sys/net documentation. Signed-off-by:
-
Ross Lagerwall authored
At this point nr_frags has been incremented but the frag does not yet have a page assigned so freeing the skb results in a crash. Reset nr_frags before freeing the skb to prevent this. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
- 08 Aug, 2019 2 commits
-
-
Guillaume Nault authored
Before commit d4289fcc ("net: IP6 defrag: use rbtrees for IPv6 defrag"), a netperf UDP_STREAM test[0] using big IPv6 datagrams (thus generating many fragments) and running over an IPsec tunnel, reported more than 6Gbps throughput. After that patch, the same test gets only 9Mbps when receiving on a be2net nic (driver can make a big difference here, for example, ixgbe doesn't seem to be affected). By reusing the IPv4 defragmentation code, IPv6 lost fragment coalescing (IPv4 fragment coalescing was dropped by commit 14fe22e3 ("Revert "ipv4: use skb coalescing in defragmentation"")). Without fragment coalescing, be2net runs out of Rx ring entries and starts to drop frames (ethtool reports rx_drops_no_frags errors). Since the netperf traffic is only composed of UDP fragments, any lost packet prevents reassembly of the full datagram. Therefore, fragments which have no possibility to ever get reassembled pile up in the reassembly queue, until the memory accounting exeeds the threshold. At that point no fragment is accepted anymore, which effectively discards all netperf traffic. When reassembly timeout expires, some stale fragments are removed from the reassembly queue, so a few packets can be received, reassembled and delivered to the netperf receiver. But the nic still drops frames and soon the reassembly queue gets filled again with stale fragments. These long time frames where no datagram can be received explain why the performance drop is so significant. Re-introducing fragment coalescing is enough to get the initial performances again (6.6Gbps with be2net): driver doesn't drop frames anymore (no more rx_drops_no_frags errors) and the reassembly engine works at full speed. This patch is quite conservative and only coalesces skbs for local IPv4 and IPv6 delivery (in order to avoid changing skb geometry when forwarding). Coalescing could be extended in the future if need be, as more scenarios would probably benefit from it. [0]: Test configuration Sender: ip xfrm policy flush ip xfrm state flush ip xfrm state add src fc00:1::1 dst fc00:2::1 proto esp spi 0x1000 aead 'rfc4106(gcm(aes))' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b 96 mode transport sel src fc00:1::1 dst fc00:2::1 ip xfrm policy add src fc00:1::1 dst fc00:2::1 dir in tmpl src fc00:1::1 dst fc00:2::1 proto esp mode transport action allow ip xfrm state add src fc00:2::1 dst fc00:1::1 proto esp spi 0x1001 aead 'rfc4106(gcm(aes))' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b 96 mode transport sel src fc00:2::1 dst fc00:1::1 ip xfrm policy add src fc00:2::1 dst fc00:1::1 dir out tmpl src fc00:2::1 dst fc00:1::1 proto esp mode transport action allow netserver -D -L fc00:2::1 Receiver: ip xfrm policy flush ip xfrm state flush ip xfrm state add src fc00:2::1 dst fc00:1::1 proto esp spi 0x1001 aead 'rfc4106(gcm(aes))' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b 96 mode transport sel src fc00:2::1 dst fc00:1::1 ip xfrm policy add src fc00:2::1 dst fc00:1::1 dir in tmpl src fc00:2::1 dst fc00:1::1 proto esp mode transport action allow ip xfrm state add src fc00:1::1 dst fc00:2::1 proto esp spi 0x1000 aead 'rfc4106(gcm(aes))' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b 96 mode transport sel src fc00:1::1 dst fc00:2::1 ip xfrm policy add src fc00:1::1 dst fc00:2::1 dir out tmpl src fc00:1::1 dst fc00:2::1 proto esp mode transport action allow netperf -H fc00:2::1 -f k -P 0 -L fc00:1::1 -l 60 -t UDP_STREAM -I 99,5 -i 5,5 -T5,5 -6 Signed-off-by:
Guillaume Nault <gnault@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Fix netlink dumping of all mcast_flags buckets, by Sven Eckelmann - Fix deletion of RTR(4|6) mcast list entries, by Sven Eckelmann ==================== Signed-off-by:
-
- 07 Aug, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
-
- 06 Aug, 2019 29 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA: FDBs, Learning and PTP This is an assortment of functional fixes for the sja1105 switch driver targeted for the "net" tree (although they apply on net-next just as well). Patch 1/5 ("net: dsa: sja1105: Fix broken learning with vlan_filtering disabled") repairs a breakage introduced in the early development stages of the driver: support for traffic from the CPU has broken "normal" frame forwarding (based on DMAC) - there is connectivity through the switch only because all frames are flooded. I debated whether this patch qualifies as a fix, since it puts the switch into a mode it has never operated in before (aka SVL). But "normal" forwarding did use to work before the "Traffic support for SJA1105 DSA driver" patchset, and arguably this patch should have been part of that. Also, it would be strange for this feature to be broken in the 5.2 LTS. Patch 2/5 ("net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well") is a simplification of a previous FDB-related patch that is currently in the 5.3 rc's. Patches 3/5 - 5/5 fix various crashes found while running linuxptp over the switch ports for extended periods of time, or in conjunction with other error conditions. The fixed-up commits were all introduced in 5.2. ==================== Signed-off-by: -
Vladimir Oltean authored
When RX timestamping is enabled and two link-local (non-meta) frames are received in a row, this constitutes an error. The tagger is always caching the last link-local frame, in an attempt to merge it with the meta follow-up frame when that arrives. To recover from the above error condition, the initial cached link-local frame is dropped and the second frame in a row is cached (in expectance of the second meta frame). However, when dropping the initial link-local frame, its backing memory was being leaked. Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by:
-
Vladimir Oltean authored
After a meta frame is received, it is associated with the cached sp->data->stampable_skb from the DSA tagger private structure. Cached means its refcount is incremented with skb_get() in order for dsa_switch_rcv() to not free it when the tagger .rcv returns NULL. The mistake is that skb_unref() is not the correct function to use. It will correctly decrement the refcount (which will go back to zero) but the skb memory will not be freed. That is the job of kfree_skb(), which also calls skb_unref(). But it turns out that freeing the cached stampable_skb is in fact not necessary. It is still a perfectly valid skb, and now it is even annotated with the partial RX timestamp. So remove the skb_copy() altogether and simply pass the stampable_skb with a refcount of 1 (incremented by us, decremented by dsa_switch_rcv) up the stack. Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by:
-
Vladimir Oltean authored
The IS_ERR_OR_NULL(priv->clock) check inside sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync from actually being run. Additionally, sja1105_ptp_clock_unregister() does not actually get run, when placed in sja1105_remove(). The DSA switch gets torn down, but the sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister needs to be moved to sja1105_teardown, to be symmetrical with sja1105_ptp_clock_register which is called from the DSA sja1105_setup. It is strange to fix a "fixes" patch, but the probe failure can only be seen when the attached PHY does not respond to MDIO (issue which I can't pinpoint the reason to) and it goes away after I power-cycle the board. This time the patch was validated on a failing board, and the kernel panic from the fixed commit's message can no longer be seen. Fixes: 29dd908d ("net: dsa: sja1105: Cancel PTP delayed work on unregister") Signed-off-by:
-
Vladimir Oltean authored
It looks like the FDB dump taken from first-generation switches also contains information on whether entries are static or not. So use that instead of searching through the driver's tables. Fixes: d7637782 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T") Signed-off-by:
-
Vladimir Oltean authored
When put under a bridge with vlan_filtering 0, the SJA1105 ports will flood all traffic as if learning was broken. This is because learning interferes with the rx_vid's configured by dsa_8021q as unique pvid's. So learning technically still *does* work, it's just that the learnt entries never get matched due to their unique VLAN ID. The setting that saves the day is Shared VLAN Learning, which on this switch family works exactly as desired: VLAN tagging still works (untagged traffic gets the correct pvid) and FDB entries are still populated with the correct contents including VID. Also, a frame cannot violate the forwarding domain restrictions enforced by its classified VLAN. It is just that the VID is ignored when looking up the FDB for taking a forwarding decision (selecting the egress port). This patch activates SVL, and the result is that frames with a learnt DMAC are no longer flooded in the scenario described above. Now exactly *because* SVL works as desired, we have to revisit some earlier patches: - It is no longer necessary to manipulate the VID of the 'bridge fdb {add,del}' command when vlan_filtering is off. This is because now, SVL is enabled for that case, so the actual VID does not matter*. - It is still desirable to hide dsa_8021q VID's in the FDB dump callback. But right now the dump callback should no longer hide duplicates (one per each front panel port's pvid, plus one for the VLAN that the CPU port is going to tag a TX frame with), because there shouldn't be any (the switch will match a single FDB entry no matter its VID anyway). * Not really... It's no longer necessary to transform a 'bridge fdb add' into 5 fdb add operations, but the user might still add a fdb entry with any vid, and all of them would appear as duplicates in 'bridge fdb show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we can prune the duplicates at insertion time. ** The VID of 0 is better than 1 because it is always guaranteed to be in the ports' hardware filter. DSA also avoids putting the VID inside the netlink response message towards the bridge driver when we return this particular VID, which makes it suitable for FDB entries learnt with vlan_filtering off. Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by:Georg Waibel <georg.waibel@sensor-technik.de> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node() puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put() before the return. Additionally, the local variable ports in the function qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(), which gets a node but does not put it. If the function returns without putting ports, it may cause a memory leak. Hence put ports before the mid-loop return statement, and also outside the loop after its last usage in this function. Issues found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
David S. Miller authored
Vlad Buslov says: ==================== action fixes for flow_offload infra compatibility Fix rcu warnings due to usage of action helpers that expect rcu read lock protection from rtnl-protected context of flow_offload infra. ==================== Signed-off-by: -
Vlad Buslov authored
Recently implemented support for sample action in flow_offload infra leads to following rcu usage warning: [ 1938.234856] ============================= [ 1938.234858] WARNING: suspicious RCU usage [ 1938.234863] 5.3.0-rc1+ #574 Not tainted [ 1938.234866] ----------------------------- [ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage! [ 1938.234872] other info that might help us debug this: [ 1938.234875] rcu_scheduler_active = 2, debug_locks = 1 [ 1938.234879] 1 lock held by tc/19540: [ 1938.234881] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1938.234900] stack backtrace: [ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1938.234911] Call Trace: [ 1938.234922] dump_stack+0x85/0xc0 [ 1938.234930] tc_setup_flow_action+0xed5/0x2040 [ 1938.234944] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1938.234965] fl_change+0xd24/0x1b30 [cls_flower] [ 1938.234990] tc_new_tfilter+0x3e0/0x970 [ 1938.235021] ? tc_del_tfilter+0x720/0x720 [ 1938.235028] rtnetlink_rcv_msg+0x389/0x4b0 [ 1938.235038] ? netlink_deliver_tap+0x95/0x400 [ 1938.235044] ? rtnl_dellink+0x2d0/0x2d0 [ 1938.235053] netlink_rcv_skb+0x49/0x110 [ 1938.235063] netlink_unicast+0x171/0x200 [ 1938.235073] netlink_sendmsg+0x224/0x3f0 [ 1938.235091] sock_sendmsg+0x5e/0x60 [ 1938.235097] ___sys_sendmsg+0x2ae/0x330 [ 1938.235111] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235125] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235138] ? find_held_lock+0x2b/0x80 [ 1938.235147] ? do_user_addr_fault+0x22d/0x490 [ 1938.235160] __sys_sendmsg+0x59/0xa0 [ 1938.235178] do_syscall_64+0x5c/0xb0 [ 1938.235187] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1938.235192] RIP: 0033:0x7ff9a4d597b8 [ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8 [ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003 [ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_sample_psample_group() helper to allow using it from both rtnl and rcu protected contexts. Fixes: a7a7be60 ("net/sched: add sample action to the hardware intermediate representation") Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by:
-
Vlad Buslov authored
Recently implemented support for police action in flow_offload infra leads to following rcu usage warning: [ 1925.881092] ============================= [ 1925.881094] WARNING: suspicious RCU usage [ 1925.881098] 5.3.0-rc1+ #574 Not tainted [ 1925.881100] ----------------------------- [ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage! [ 1925.881106] other info that might help us debug this: [ 1925.881109] rcu_scheduler_active = 2, debug_locks = 1 [ 1925.881112] 1 lock held by tc/18591: [ 1925.881115] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1925.881124] stack backtrace: [ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1925.881132] Call Trace: [ 1925.881138] dump_stack+0x85/0xc0 [ 1925.881145] tc_setup_flow_action+0x1771/0x2040 [ 1925.881155] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1925.881175] fl_change+0xd24/0x1b30 [cls_flower] [ 1925.881200] tc_new_tfilter+0x3e0/0x970 [ 1925.881231] ? tc_del_tfilter+0x720/0x720 [ 1925.881243] rtnetlink_rcv_msg+0x389/0x4b0 [ 1925.881250] ? netlink_deliver_tap+0x95/0x400 [ 1925.881257] ? rtnl_dellink+0x2d0/0x2d0 [ 1925.881264] netlink_rcv_skb+0x49/0x110 [ 1925.881275] netlink_unicast+0x171/0x200 [ 1925.881284] netlink_sendmsg+0x224/0x3f0 [ 1925.881299] sock_sendmsg+0x5e/0x60 [ 1925.881305] ___sys_sendmsg+0x2ae/0x330 [ 1925.881309] ? task_work_add+0x43/0x50 [ 1925.881314] ? fput_many+0x45/0x80 [ 1925.881329] ? __lock_acquire+0x248/0x1930 [ 1925.881342] ? find_held_lock+0x2b/0x80 [ 1925.881347] ? task_work_run+0x7b/0xd0 [ 1925.881359] __sys_sendmsg+0x59/0xa0 [ 1925.881375] do_syscall_64+0x5c/0xb0 [ 1925.881381] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1925.881384] RIP: 0033:0x7feb245047b8 [ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8 [ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003 [ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to allow using them from both rtnl and rcu protected contexts. Fixes: 8c8cfc6e ("net/sched: add police action to the hardware intermediate representation") Signed-off-by: -
David S. Miller authored
Jiangfeng Xiao says: ==================== net: hisilicon: Fix a few problems with hip04_eth During the use of the hip04_eth driver, several problems were found, which solved the hip04_tx_reclaim reentry problem, fixed the problem that hip04_mac_start_xmit never returns NETDEV_TX_BUSY and the dma_map_single failed on the arm64 platform. ==================== Signed-off-by: -
Jiangfeng Xiao authored
On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by:
Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by:
-
Jiangfeng Xiao authored
TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by:
-
Jiangfeng Xiao authored
If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: -
David S. Miller authored
Roman Mashak says: ==================== Fix batched event generation for vlan action When adding or deleting a batch of entries, the kernel sends up to TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user space. However it does not consider that the action sizes may vary and require different skb sizes. For example, consider the following script adding 32 entries with all supported vlan parameters (in order to maximize netlink messages size): % cat tc-batch.sh TC="sudo /mnt/iproute2.git/tc/tc" $TC actions flush action vlan for i in `seq 1 $1`; do cmd="action vlan push protocol 802.1q id 4094 priority 7 pipe \ index $i cookie aabbccddeeff112233445566778800a1 " args=$args$cmd done $TC actions add $args % % ./tc-batch.sh 32 Error: Failed to fill netlink attributes while adding TC action. We have an error talking to the kernel % patch 1 adds callback in tc_action_ops of vlan action, which calculates the action size, and passes size to tcf_add_notify()/tcf_del_notify(). patch 2 updates the TDC test suite with relevant vlan test cases. ==================== Acked-by:Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Roman Mashak authored
Update TDC tests with cases varifying ability of TC to install or delete batches of vlan actions. Signed-off-by:
-
Roman Mashak authored
Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: c7e2b968 ("sched: introduce vlan action") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A few MIPS fixes for 5.3: - Various switch fall through annotations to fixup warnings & errors resulting from -Wimplicit-fallthrough. - A fix for systems (at least jazz) using an i8253 PIT as clocksource when it's not suitably configured. - Set struct cacheinfo's cpu_map_populated field to true, indicating that we filled in cache info detected from cop0 registers & avoiding complaints about that info being (intentionally) missing in devicetree" * tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: BCM63XX: Mark expected switch fall-through MIPS: OProfile: Mark expected switch fall-throughs MIPS: Annotate fall-through in Cavium Octeon code MIPS: Annotate fall-through in kvm/emulate.c mips: fix cacheinfo MIPS: kernel: only use i8253 clocksource with periodic clockevent -
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fixes for -net Couple of fixes for -net. More info in commit log. ==================== Signed-off-by: -
Jose Abreu authored
Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by:
-
Jose Abreu authored
Fixup the XGMAC selftests by correctly finishing the implementation of set_filter callback. Result: $ ethtool -t enp4s0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters -95 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated which consists most of patches in this pull request. Only most notable iwlwifi fixes are listed below. mwifiex * fix a regression related to WPA1 networks since v5.3-rc1 iwlwifi * fix use-after-free issues * fix DMA mapping API usage errors * fix frame drop occurring due to reorder buffer handling in RSS in certain conditions * fix rate scale locking issues * disable TX A-MSDU on older NICs as it causes problems and was never supposed to be supported * new PCI IDs * GEO_TX_POWER_LIMIT API issue that many people were hitting ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - functional regression fix for some of the Logitech unifying devices, from Hans de Goede - race condition fix in hid-sony for bug severely affecting Valve/Android deployments, from Roderick Colenbrander - several fixes for issues found by syzbot/kasan, from Oliver Neukum and Hillf Danton - functional regression fix for Wacom Cintiq device, from Aaron Armstrong Skomra - a few other assorted device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: sony: Fix race condition between rumble and device remove. HID: hiddev: do cleanup in failure of opening a device HID: hiddev: avoid opening a disconnected device HID: input: fix a4tech horizontal wheel custom usage HID: Add quirk for HP X1200 PIXART OEM mouse HID: holtek: test for sanity of intfdata HID: wacom: fix bit shift for Cintiq Companion 2 HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52 HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devices HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT HID: logitech-dj: add the Powerplay receiver HID: logitech-hidpp: add USB PID for a few more supported mice HID: logitech-dj: rename "gaming" receiver to "lightspeed"
-
Denis Kirjanov authored
be_process_mcc() is invoked in 3 different places and always with BHs disabled except the be_poll function but since it's invoked from softirq with BHs disabled it won't hurt. v1->v2: added explanation to the patch v2->v3: add a missing call from be_cmds.c Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Christophe JAILLET authored
A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Chen-Yu Tsai authored
The sun4i-emac uses the "phy" property to find the PHY it's supposed to use. This property was deprecated in favor of "phy-handle" in commit 8c5b0944 ("dt-bindings: net: sun4i-emac: Convert the binding to a schemas"). Add support for this new property name, and fall back to the old one in case the device tree hasn't been updated. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull pti updates from Thomas Gleixner: "The performance deterioration departement is not proud at all to present yet another set of speculation fences to mitigate the next chapter in the 'what could possibly go wrong' story. The new vulnerability belongs to the Spectre class and affects GS based data accesses and has therefore been dubbed 'Grand Schemozzle' for secret communication purposes. It's officially listed as CVE-2019-1125. Conditional branches in the entry paths which contain a SWAPGS instruction (interrupts and exceptions) can be mis-speculated which results in speculative accesses with a wrong GS base. This can happen on entry from user mode through a mis-speculated branch which takes the entry from kernel mode path and therefore does not execute the SWAPGS instruction. The following speculative accesses are done with user GS base. On entry from kernel mode the mis-speculated branch executes the SWAPGS instruction in the entry from user mode path which has the same effect that the following GS based accesses are done with user GS base. If there is a disclosure gadget available in these code paths the mis-speculated data access can be leaked through the usual side channels. The entry from user mode issue affects all CPUs which have speculative execution. The entry from kernel mode issue affects only Intel CPUs which can speculate through SWAPGS. On CPUs from other vendors SWAPGS has semantics which prevent that. SMAP migitates both problems but only when the CPU is not affected by the Meltdown vulnerability. The mitigation is to issue LFENCE instructions in the entry from kernel mode path for all affected CPUs and on the affected Intel CPUs also in the entry from user mode path unless PTI is enabled because the CR3 write is serializing. The fences are as usual enabled conditionally and can be completely disabled on the kernel command line. The Spectre V1 documentation is updated accordingly. A big "Thank You!" goes to Josh for doing the heavy lifting for this round of hardware misfeature 'repair'. Of course also "Thank You!" to everybody else who contributed in one way or the other" * 'x86/grand-schemozzle' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: Add swapgs description to the Spectre v1 documentation x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS x86/entry/64: Use JMP instead of JMPQ x86/speculation: Enable Spectre v1 swapgs mitigations x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations
-
Roderick Colenbrander authored
Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4 gamepad while rumble is enabled. This issue is reproducible with a frequency of 1 in 3 times in the game Borderlands 2 when using an automatic weapon, which triggers many rumble operations. We found the issue to be a race condition between sony_remove and the final device destruction by the HID / input system. The problem was that sony_remove didn't clean some of its work_item state in "struct sony_sc". After sony_remove work, the corresponding evdev node was around for sufficient time for applications to still queue rumble work after "sony_remove". On pre-4.19 kernels the race condition caused a kernel crash due to a NULL-pointer dereference as "sc->output_report_dmabuf" got freed during sony_remove. On newer kernels this crash doesn't happen due the buffer now being allocated using devm_kzalloc. However we can still queue work, while the driver is an undefined state. This patch fixes the described problem, by guarding the work_item "state_worker" with an initialized variable, which we are setting back to 0 on cleanup. Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
