Skip to content

L
linux
Switch branch/tag
  1. 09 Jun, 2010 12 commits
  3. 08 Jun, 2010 5 commits
  5. 07 Jun, 2010 2 commits
  7. 05 Jun, 2010 7 commits
    • Arun Sharma's avatar
      perf report: Implement --sort cpu · f60f3593
      Arun Sharma authored 
      In a shared multi-core environment, users want to analyze why their
program was slow. In particular, if the code ran slower only on certain
CPUs due to interference from other programs or kernel threads, the user
should be able to notice that.

Sample usage:

perf record -f -a -- sleep 3
perf report --sort cpu,comm

Workload:

program is running on 16 CPUs
Experiencing interference from an antagonist only on 4 CPUs.

  Samples: 106218177676 cycles

  Overhead  CPU          Command
  ........  ...  ...............

     6.25%  2            program
     6.24%  6            program
     6.24%  11           program
     6.24%  5            program
     6.24%  9            program
     6.24%  10           program
     6.23%  15           program
     6.23%  7            program
     6.23%  3            program
     6.23%  14           program
     6.22%  1            program
     6.20%  13           program
     3.17%  12           program
     3.15%  8            program
     3.14%  0            program
     3.13%  4            program
     3.11%  4         antagonist
     3.11%  0         antagonist
     3.10%  8         antagonist
     3.07%  12        antagonist

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100505181612.GA5091@sharma-home.net>
Signed-off-by: default avatarArun Sharma <aruns@google.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      f60f3593
    • Arnaldo Carvalho de Melo's avatar
      perf tools: Make event__preprocess_sample parse the sample · 41a37e20
      Arnaldo Carvalho de Melo authored 
      Simplifying the tools that were using both in sequence and allowing
upcoming simplifications, such as Arun's patch to sort by cpus.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      41a37e20
    • Stephane Eranian's avatar
      perf annotate: Ask objdump to demangle symbols · 45d8e802
      Stephane Eranian authored 
      Perf report is demangling symbols but not annotate.

The former uses internal demangling via libbdf or libiberty. The latter
executes objdump which by default does not demangle symbols.

This patch adds the -C option to the objdump cmdline to enable symbol
demangling.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4c07b323.2126e30a.6245.0e1e@mx.google.com>
Signed-off-by: default avatarStephane Eranian <eranian@google.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      45d8e802
    • Stephane Eranian's avatar
      perf buildid: add perfconfig option to specify buildid cache dir · 45de34bb
      Stephane Eranian authored 
      This patch adds the ability to specify an alternate directory to store the
buildid cache (buildids, copy of binaries). By default, it is hardcoded to
$HOME/.debug. This directory contains immutable data. The layout of the
directory is such that no conflicts in filenames are possible. A modification
in a file, yields a different buildid and thus a different location in the
subdir hierarchy.

You may want to put the buildid cache elsewhere because of disk space
limitation or simply to share the cache between users. It is also useful for
remote collect vs. local analysis of profiles.

This patch adds a new config option to the perfconfig file.  Under the tag
'buildid', there is a dir option. For instance, if you have:

$ cat /etc/perfconfig
[buildid]
dir = /var/cache/perf-buildid

All buildids and binaries are be saved in the directory specified. The perf
record, buildid-list, buildid-cache, report, annotate, and archive commands
will it to pull information out.

The option can be set in the system-wide perfconfig file or in the
$HOME/.perfconfig file.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com>
Signed-off-by: default avatarStephane Eranian <eranian@google.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      45de34bb
    • Arnaldo Carvalho de Melo's avatar
      perf tools: Make target to generate self contained source tarball · 8e5564e6
      Arnaldo Carvalho de Melo authored 
      Useful for when people want to try some version of the perf tools and don't
wants to download the kernel tarball.

Here is a session using this new target:

  [root@emilia linux-2.6-tip]# make help | grep -i perf
    perf-tar-src-pkg    - Build perf-2.6.35-rc1.tar source tarball
    perf-targz-src-pkg  - Build perf-2.6.35-rc1.tar.gz source tarball
    perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball
  [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg
    TAR
  [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2
  -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2
  [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2
  [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1
  [root@emilia perf-2.6.35-rc1]# ls
  arch  HEAD  include  lib  tools
  [root@emilia perf-2.6.35-rc1]# cd tools/perf
  [root@emilia perf]# make -j9 2>&1 | tail
      CC arch/x86/util/dwarf-regs.o
      CC util/probe-finder.o
      CC util/newt.o
      CC util/scripting-engines/trace-event-perl.o
      CC scripts/perl/Perf-Trace-Util/Context.o
      CC perf.o
      CC builtin-help.o
      AR libperf.a
      LINK perf
  rm .perf.dev.null
  [root@emilia perf]# ./perf record -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ]
  [root@emilia perf]# ./perf report | head -12
  # Events: 6K cycles
  #
  # Overhead          Command       Shared Object  Symbol
  # ........  ...............  ..................  ......
  #
       4.73%             perf  [kernel.kallsyms]   [k] format_decode
       4.49%             perf  libc-2.12.so        [.] _IO_file_underflow_internal
       4.38%             init  [kernel.kallsyms]   [k] mwait_idle
       3.29%             perf  [kernel.kallsyms]   [k] vsnprintf
       2.38%             init  [kernel.kallsyms]   [k] sched_clock_local
       2.35%             init  [kernel.kallsyms]   [k] apic_timer_interrupt
       1.86%     sirq-timer/5  [kernel.kallsyms]   [k] find_busiest_group
  [root@emilia perf]#
Acked-by: default avatarMichal Marek <mmarek@suse.cz>
Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100528185357.GA28009@ghostprotocols.net>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      8e5564e6
    • Stephane Eranian's avatar
      perf tools: Add the ability to specify list of cpus to monitor · c45c6ea2
      Stephane Eranian authored 
      This patch adds a -C option to stat, record, top to designate a list of CPUs to
monitor. CPUs can be specified as a comma-separated list or ranges, no space
allowed.

Examples:
$ perf record -a -C0-1,4-7 sleep 1
$ perf top -C0-4
$ perf stat -a -C1,2,3,4 sleep 1

With perf record in per-thread mode with inherit mode on, samples are collected
only when the thread runs on the designated CPUs.

The -C option does not turn on system-wide mode automatically.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bff9496.d345d80a.41fe.7b00@mx.google.com>
Signed-off-by: default avatarStephane Eranian <eranian@google.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      c45c6ea2
    • Stephane Eranian's avatar
      perf report: Make -D print sampled CPU · 761844b9
      Stephane Eranian authored 
      It is useful to know on which CPU a sample was captured on.
The information is captured with perf record -R but it was
not printed out by perf report -D. This patch adds this.

When -R is not used, cpu is set to -1to indicate that
the CPU is unknown (it is not captured).

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bff964c.e88cd80a.3106.7d31@mx.google.com>
Signed-off-by: default avatarStephane Eranian <eranian@google.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      761844b9
  9. 04 Jun, 2010 2 commits
  11. 03 Jun, 2010 3 commits
    • Steven Rostedt's avatar
      tracing: Remove ftrace_preempt_disable/enable · 5168ae50
      Steven Rostedt authored 
      The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).

The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.

This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.

This bug would cause a missed preemption check and cause lower latencies.

Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      5168ae50
    • Steven Rostedt's avatar
      tracing/sched: Make preempt_schedule() notrace · d1f74e20
      Steven Rostedt authored 
      The function tracer code uses ftrace_preempt_disable() to disable
preemption instead of normal preempt_disable(). But there's a slight
race condition that may cause it to lose a preemption check.

This was made to keep the function tracer from recursing on itself
by disabling preemption then having the enable call the function tracer
again, causing infinite recursion.

The bug was assumed to happen if the call was just in schedule, but
this is incorrect. The bug is caused by preempt_schedule() which
is called by preempt_enable(). The calling of preempt_enable() when
NEED_RESCHED was set would call preempt_schedule() which would call
the function tracer again.

By making the preempt_schedule() and add_preempt_count() notrace
then this will prevent the inifinite recursion. This is because
the add_preempt_count() would stop the preempt_enable() in the
function tracer from calling preempt_schedule() again.

The sub_preempt_count() is also made notrace just to keep it
symmetric.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      d1f74e20
    • Peter Zijlstra's avatar
      perf: Fix crash in swevents · c6df8d5a
      Peter Zijlstra authored 
      Frederic reported that because swevents handling doesn't disable IRQs
anymore, we can get a recursion of perf_adjust_period(), once from
overflow handling and once from the tick.

If both call ->disable, we get a double hlist_del_rcu() and trigger
a LIST_POISON2 dereference.

Since we don't actually need to stop/start a swevent to re-programm
the hardware (lack of hardware to program), simply nop out these
callbacks for the swevent pmu.
Reported-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275557609.27810.35218.camel@twins>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      c6df8d5a
  13. 02 Jun, 2010 1 commit
  15. 01 Jun, 2010 3 commits
    • Arnaldo Carvalho de Melo's avatar
      perf buildid-list: Fix --with-hits event processing · b5c874f1
      Arnaldo Carvalho de Melo authored 
      When we use plain 'perf buildid-list' we use only what is in the buildid
table in the perf.data header. And those have absolute pathnames because
at 'perf record' time we used __perf_session__process_events and that
doesn't sets up the path shortening code in map__new() that happens if
symbol_conf.full_paths is false, the default.

On the other hand, when we use 'perf buildid-list --with-hits' we
process all the events using perf_session__process_events, adding
entries to the global DSO list _after_ removing the current directory
from the DSO name, for presentation purposes.

Because of that we end up having two entries in the DSO list when
recording events for binaries using relative pathnames.

Fix it minimally by setting symbol_conf.full_paths to true when marking
the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf
archive'

Right fix longer term is to shorten the path only at presentation time.
Will be done for 2.6.36.
Reported-by: default avatarStephane Eranian <eranian@google.com>
Tested-by: default avatarStephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100601183837.GC4093@ghostprotocols.net>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      b5c874f1
    • Pierre Tardy's avatar
      perf scripts python: Give field dict to unhandled callback · c0251485
      Pierre Tardy authored 
      trace_unhandled() callback does not allow to access event fields, this patch
resolves the problem.

It can also been used as a more pythonic and flexible way for script writters
to demux event types

This will for example greatly simplify pytimechart event demux.
Acked-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: default avatarTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com>
Signed-off-by: default avatarPierre Tardy <tardyp@gmail.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      c0251485
    • Konstantin Stepanyuk's avatar
      perf hist: fix objdump output parsing · 75d9ef17
      Konstantin Stepanyuk authored 
      hist_entry__annotate() runs objdump with -S option so the output may contain
lines of any format. If a line starts with a colon strtoull() returns 0 and
calculated offset will be negative. This causes perf annotate segfaults.

Make sure that strtoull() has parsed at least one digit.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: default avatarKonstantin Stepanyuk <konstantin.stepanyuk@gmail.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      75d9ef17
  17. 31 May, 2010 5 commits
    • Borislav Petkov's avatar
      perf-record: Check correct pid when forking · 2fb750e8
      Borislav Petkov authored 
      When forking the child to be traced, we should check the correct
return value from fork() and not a local variable which is otherwise
unused.
Signed-off-by: default avatarBorislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100531211818.GA30175@liondog.tnic>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      2fb750e8
    • Frederic Weisbecker's avatar
      perf: Do the comm inheritance per thread in event__process_task · dd833d71
      Frederic Weisbecker authored 
      event__process_task() doesn't propagate the comm copy on clone,
but only on process fork. So we loose all the tid:comm resolution
for tasks that aren't a main process thread.

Progragate the per thread granularity to event__process_task for
pid resolution.

This fixes various unresolved pids in perf sched, especially when
we trace multithread processes. The problem is quickly reproducible
with the messaging benchmark using the multithread mode "-t" :

	perf sched record perf bench sched messaging -t
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
      dd833d71
    • Frederic Weisbecker's avatar
      perf: Use event__process_task from perf sched · af64865b
      Frederic Weisbecker authored 
      perf sched uses event__process_comm(), which means it can resolve
comms from:

- tasks that have exec'ed (kernel comm events)
- tasks that were running when perf record started the actual
  recording (synthetized comm events)

But perf sched can't resolve the pids of tasks that were created
after the recording started.

To solve this, we need to inherit the comms on fork events using
event__process_task().

This fixes various unresolved pids in perf sched, easily visible
with:
	perf sched record perf bench sched messaging
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
      af64865b
    • Frederic Weisbecker's avatar
      perf: Process comm events by tid · 13eb04fd
      Frederic Weisbecker authored 
      When we synthetize the existing running tasks though procfs,
we walk through every threads of a process, queuing one comm
events per tid.

But then on report time, event__process_comm() only creates and
sets the comm on a per process granularity. This is the right
thing for comm events that came from the kernel, as they are
only created on exec. Sub-threads then inherit their comm
from fork events. But that doesn't work with our synthetized
comm events taken from procfs informations as the per thread
granularity is done on comm events directly there.

Hence we need event__process_comm() to work with the tid rather
than the pid. It won't change anything for comm events coming
from the kernel but this will fix the synthetized ones.

Before:

	$ ./perf report -D | grep COMM | grep firefox

	0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297
	0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5297
	0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5297
	0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5297
	0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5297
	0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5297

After:
	$ ./perf report -D | grep COMM | grep firefox

	0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297
	0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5299
	0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5300
	0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5308
	0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5309
	0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5312

This fixes various unresolved pid on perf sched.
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
      13eb04fd
    • Randy Dunlap's avatar
      blktrace: Fix new kernel-doc warnings · 546cf44a
      Randy Dunlap authored 
      Fix blktrace.c kernel-doc warnings:
 Warning(kernel/trace/blktrace.c:858): No description found for parameter 'ignore'
 Warning(kernel/trace/blktrace.c:890): No description found for parameter 'ignore'
Signed-off-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100529114507.c466fc1e.randy.dunlap@oracle.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      546cf44a
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7