Pull xtensa updates from Chris Zankel:
 "Xtensa fixes and improvements for 4.3:

   - reimplement DMA API using common helpers
   - implement counting and sampling perf events using hardware perf
     counters
   - add fake NMI support for hardware perf counters
   - fix THREADPTR register reloading on return to userspace
   - keep exception/interrupt stack continuous for debugger
   - improve vmlinux.lds.S post-processing"

* tag 'xtensa-20150830' of git://github.com/czankel/xtensa-linux:
  xtensa: improve vmlinux.lds.S sed post-processing
  xtensa: drop unused irq_err_count
  xtensa: implement fake NMI
  xtensa: don't touch EXC_TABLE_FIXUP in _switch_to
  xtensa: fix kernel register spilling
  xtensa: reorganize irq flags tracing
  perf tools: xtensa: add DWARF register names
  xtensa: implement counting and sampling perf events
  xtensa: count software page fault perf events
  xtensa: add profiling IRQ type to xtensa_irq_map
  xtensa: select PERF_USE_VMALLOC for cache-aliasing configurations
  xtensa: move oprofile stack tracing to stacktrace.c
  xtensa: keep exception/interrupt stack continuous
  xtensa: clean up Kconfig dependencies for custom cores
  xtensa: reimplement DMA API using common helpers
  xtensa: fix threadptr reload on return to userspace
  xtensa: ISS: add missing va_end into split_if_spec

Pull alpha update from Matt Turner:
 "A single patch for alpha, one that enables ARCH_USE_CMPXCHG_LOCKREF
  and offers around an 8% performance improvement on a little benchmark
  that you wrote"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: select CONFIG_ARCH_USE_CMPXCHG_LOCKREF.

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/bootinfo: Use kmemdup rather than duplicating its implementation
  m68k/defconfig: Update defconfigs for v4.2-rc1
  m68k/defconfig: Disable experimental CONFIG_DM_CACHE

Pull USB updates from Greg KH:
 "Here's the big USB and PHY patchset for 4.3-rc1.

  As usual, the majority of the changes are in the USB gadget portion of
  the tree, lots of little changes all over the place for bugs and new
  hardware.  Other than that, the normal mix of new hardware support and
  bugfixes.

  All have been in linux-next with no reported issues"

* tag 'usb-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (261 commits)
  USB: qcserial: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
  USB: ftdi_sio: Added custom PID for CustomWare products
  USB: usb_wwan: silence read errors on disconnect
  USB: option: silence interrupt errors
  USB: symbolserial: Correct transferred data size
  USB: symbolserial: Use usb_get_serial_port_data
  usb: misc: usbtest: format max packet size for iso transfer
  usb: host: ehci-sys: delete useless bus_to_hcd conversion
  Revert "usb: interface authorization: Declare authorized attribute"
  Revert "usb: interface authorization: Introduces the default interface authorization"
  Revert "usb: interface authorization: Control interface probing and claiming"
  Revert "usb: interface authorization: Introduces the USB interface authorization"
  Revert "usb: interface authorization: SysFS part of USB interface authorization"
  Revert "usb: interface authorization: Documentation part"
  Revert "usb: interface authorization: Use a flag for the default device authorization"
  usb: core: hub: Removed some warnings generated by checkpatch.pl
  USB: host: ohci-at91: merge loops in ohci_hcd_at91_drv_probe
  USB: host: ohci-at91: merge ohci_at91_of_init in ohci_hcd_at91_drv_probe
  USB: host: ohci-at91: depend on OF
  USB: host: ohci-at91: move at91_usbh_data definition in c file
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty/serial driver update for 4.3-rc1.

  Not many major things, a number of driver updates and changes, and the
  8250 driver got split up a bit to make it easier to work with by
  moving some functions to a new file.  Full details are in the
  shortlog.

  All have been in linux-next with no reported issues"

* tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
  serial: imx: save and restore context in the suspend path
  serial: imx: allow waking up on RTSD
  serial: imx: introduce serial_imx_enable_wakeup()
  serial: imx: remove unbalanced clk_prepare
  serial: 8250: move rx_running out of the bitfield
  tty: serial: 8250_omap: do not use RX DMA if pause is not supported
  serial:8250_dw: do not alter CTS and DCTS since AFE is enabled
  tty: serial: men_z135_uart.c: Don't initialize port->lock
  tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios()
  serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)
  serial: 8250: don't bind to SMSC IrCC IR port
  serial: mxs-auart: fix baud rate range
  serial: mxs-auart: keep the AUART unit in reset state when not in use
  serial: mxs-auart: use a function name to reflect what it really does
  serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512
  sc16is7xx: constify devtype
  sc16is7xx: support multiple devices
  sc16is7xx: save and use per-chip line number
  uart: pl011: Add support to ZTE ZX296702 uart
  uart: pl011: Improve LCRH register access decision
  ...

Pull staging driver updates from Greg KH:
 "Here is the big staging driver updates for 4.3-rc1.

  Lots of things all over the place, almost all of them trivial fixups
  and changes.  The usual IIO updates and new drivers and we have added
  the MOST driver subsystem which is getting cleaned up in the tree.
  The ozwpan driver is finally being deleted as it is obviously
  abandoned and no one cares about it.

  Full details are in the shortlog, and all of these have been in
  linux-next with no reported issues"

* tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (912 commits)
  staging/lustre/o2iblnd: remove references to ib_reg_phsy_mr()
  staging: wilc1000: fix build warning with setup_timer()
  staging: wilc1000: remove DECLARE_WILC_BUFFER()
  staging: wilc1000: remove void function return statements that are not useful
  staging: wilc1000: coreconfigurator.c: fix kmalloc error check
  staging: wilc1000: coreconfigurator.c: use kmalloc instead of WILC_MALLOC
  staging: wilc1000: remove unused codes of gps8ConfigPacket
  staging: wilc1000: remove unnecessary void pointer cast
  staging: wilc1000: remove WILC_NEW and WILC_NEW_EX
  staging: wilc1000: use kmalloc instead of WILC_NEW
  staging: wilc1000: Process WARN, INFO options of debug levels from user
  staging: wilc1000: remove unneeded tstrWILC_MsgQueueAttrs typedef
  staging: wilc1000: delete wilc_osconfig.h
  staging: wilc1000: delete wilc_log.h
  staging: wilc1000: delete wilc_timer.h
  staging: wilc1000: remove WILC_TimerStart()
  staging: wilc1000: remove WILC_TimerCreate()
  staging: wilc1000: remove WILC_TimerDestroy()
  staging: wilc1000: remove WILC_TimerStop()
  staging: wilc1000: remove tstrWILC_TimerAttrs typedef
  ...

Pull driver core updates from Greg KH:
 "Here is the new patches for the driver core / sysfs for 4.3-rc1.

  Very small number of changes here, all the details are in the
  shortlog, nothing major happening at all this kernel release, which is
  nice to see"

* tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  bus: subsys: update return type of ->remove_dev() to void
  driver core: correct device's shutdown order
  driver core: fix docbook for device_private.device
  selftests: firmware: skip timeout checks for kernels without user mode helper
  kernel, cpu: Remove bogus __ref annotations
  cpu: Remove bogus __ref annotation of cpu_subsys_online()
  firmware: fix wrong memory deallocation in fw_add_devm_name()
  sysfs.txt: update show method notes about sprintf/snprintf/scnprintf usage
  devres: fix devres_get()

Pull char/misc driver patches from Greg KH:
 "Here's the "big" char/misc driver update for 4.3-rc1.

  Not much really interesting here, just a number of little changes all
  over the place, and some nice consolidation of the nvmem drivers to a
  common framework.  As usual, the mei drivers stand out as the largest
  "churn" to handle new devices and features in their hardware.

  All have been in linux-next for a while with no issues"

* tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  auxdisplay: ks0108: initialize local parport variable
  extcon: palmas: Fix build break due to devm_gpiod_get_optional API change
  extcon: palmas: Support GPIO based USB ID detection
  extcon: Fix signedness bugs about break error handling
  extcon: Drop owner assignment from i2c_driver
  extcon: arizona: Simplify pdata symantics for micd_dbtime
  extcon: arizona: Declare 3-pole jack if we detect open circuit on mic
  extcon: Add exception handling to prevent the NULL pointer access
  extcon: arizona: Ensure variables are set for headphone detection
  extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio
  extcon: arizona: Add basic microphone detection DT/ACPI bindings
  extcon: arizona: Update to use the new device properties API
  extcon: palmas: Remove the mutually_exclusive array
  extcon: Remove optional print_state() function pointer of struct extcon_dev
  extcon: Remove duplicate header file in extcon.h
  extcon: max77843: Clear IRQ bits state before request IRQ
  toshiba laptop: replace ioremap_cache with ioremap
  misc: eeprom: max6875: clean up max6875_read()
  misc: eeprom: clean up eeprom_read()
  misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write
  ...

Pull kvm updates from Paolo Bonzini:
 "A very small release for x86 and s390 KVM.

   - s390: timekeeping changes, cleanups and fixes

   - x86: support for Hyper-V MSRs to report crashes, and a bunch of
     cleanups.

  One interesting feature that was planned for 4.3 (emulating the local
  APIC in kernel while keeping the IOAPIC and 8254 in userspace) had to
  be delayed because Intel complained about my reading of the manual"

* tag 'kvm-4.3-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  x86/kvm: Rename VMX's segment access rights defines
  KVM: x86/vPMU: Fix unnecessary signed extension for AMD PERFCTRn
  kvm: x86: Fix error handling in the function kvm_lapic_sync_from_vapic
  KVM: s390: Fix assumption that kvm_set_irq_routing is always run successfully
  KVM: VMX: drop ept misconfig check
  KVM: MMU: fully check zero bits for sptes
  KVM: MMU: introduce is_shadow_zero_bits_set()
  KVM: MMU: introduce the framework to check zero bits on sptes
  KVM: MMU: split reset_rsvds_bits_mask_ept
  KVM: MMU: split reset_rsvds_bits_mask
  KVM: MMU: introduce rsvd_bits_validate
  KVM: MMU: move FNAME(is_rsvd_bits_set) to mmu.c
  KVM: MMU: fix validation of mmio page fault
  KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON
  KVM: s390: host STP toleration for VMs
  KVM: x86: clean/fix memory barriers in irqchip_in_kernel
  KVM: document memory barriers for kvm->vcpus/kvm->online_vcpus
  KVM: x86: remove unnecessary memory barriers for shared MSRs
  KVM: move code related to KVM_SET_BOOT_CPU_ID to x86
  KVM: s390: log capability enablement and vm attribute changes
  ...

On Alpha we have spinlocks that are 32b in size and an efficient
cmpxchg64 implementation, so we qualify to make use of cmpxchg backed
lockrefs. Select the ARCH_USE_CMPXCHG_LOCKREF Kconfig symbol and provide
a trivial implementation of arch_spin_value_unlocked to satisfy the
lockref code.

Using Linus' simple testcase from
http://article.gmane.org/gmane.linux.file-systems/77466 on a dual CPU
ES47 system I see around an 8% gain:

    N       Min       Max    Median       Avg      Stddev
x  30   6194580   6295654   6272504   6272514   17694.232
+  30   6731164   6786334   6767982d   6764274   13738.863
Difference at 95.0% confidence
        491760 +/- 8188.17
        7.83992% +/- 0.130541%
        (Student's t, pooled s = 15840.5)
Signed-off-by: Matt Turner <mattst88@gmail.com>

Linux 4.2

Commit cf736ea6 ("thermal: power_allocator: do not use devm*
interfaces") forgot to change a devm_kcalloc() to just kcalloc(), but
it's corresponding devm_kfree() was changed to kfree().  Allocate with
kcalloc() to match the kfree().

Fixes: cf736ea6 ("thermal: power_allocator: do not use devm* interfaces")
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull libata fixlet from Tejun Heo:
 "Simple blacklist entry addition"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  Add factory recertified Crucial M500s to blacklist

Pull sound fixes from Takashi Iwai:
 "Here are stable fixes that have been gathered since rc8: fixes for
  HD-audio widget power control regressions since 4.1, a NULL fix for
  HD-audio HDMI, a noise fix for Conexant codecs and a quirk addition
  for USB-Audio DSD"

* tag 'sound-fix-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix path power activation
  ALSA: hda - Check all inputs for is_active_nid_for_any()
  ALSA: hda: fix possible NULL dereference
  ALSA: hda - Shutdown CX20722 on reboot/free to avoid spurious noises
  ALSA: usb: Add native DSD support for Gustard DAC-X20U

Pull powerpc fixes from Michael Ellerman:
 "Fix MSI/MSI-X on pseries from Guilherme"

* tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case
  PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code

Pull networking fixes from David Miller:
 "Some straggler bug fixes here:

   1) Netlink_sendmsg() doesn't check iterator type properly in mmap
      case, from Ken-ichirou MATSUZAWA.

   2) Don't sleep in atomic context in bcmgenet driver, from Florian
      Fainelli.

   3) The pfkey_broadcast() code patch can't actually ever use anything
      other than GFP_ATOMIC.  And the cases that right now pass
      GFP_KERNEL or similar will currently trigger an RCU splat.  Just
      use GFP_ATOMIC unconditionally.  From David Ahern.

   4) Fix FD bit timings handling in pcan_usb driver, from Marc
      Kleine-Budde.

   5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang.

   6) Traversal into drivers/net/ethernet/renesas should be triggered by
      CONFIG_NET_VENDOR_RENESAS, not a particular driver's config
      option.  From Kazuya Mizuguchi.

   7) Fix regression in handling of igmp_join errors in vxlan, from
      Marcelo Ricardo Leitner.

   8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock
      mutex when programming the registers.  From Russell King.

   9) Fix non-forced handling in u32_destroy(), from WANG Cong.

  10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in
      usbnet_stop(), from Eugene Shatokhin.

  11) In sfc driver, don't fetch statistics firmware isn't capable of,
      from Bert Kenward.

  12) Verify ASCONF address parameter location in SCTP, from Xin Long"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state
  sctp: asconf's process should verify address parameter is in the beginning
  sfc: only use vadaptor stats if firmware is capable
  net: phy: fixed: propagate fixed link values to struct
  usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared
  drivers: net: xgene: fix: Oops in linkwatch_fire_event
  cls_u32: complete the check for non-forced case in u32_destroy()
  net: fec: use reinit_completion() in mdio accessor functions
  net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect()
  vxlan: re-ignore EADDRINUSE from igmp_join
  net: compile renesas directory if NET_VENDOR_RENESAS is configured
  ip6_gre: release cached dst on tunnel removal
  phylib: Make PHYs children of their MDIO bus, not the bus' parent.
  can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters
  net: Fix RCU splat in af_key
  net: bcmgenet: fix uncleaned dma flags
  net: bcmgenet: Avoid sleeping in bcmgenet_timeout
  netlink: mmap: fix tx type check

Pull nvdimm fixlet from Dan Williams:
 "This is a libnvdimm ABI fixup.

  I pushed back on this change quite hard given the late date, that it
  appears to be purely cosmetic, sysfs is not necessarily meant to be a
  user friendly UI, and the kernel interprets the reversed polarity of
  the ACPI_NFIT_MEM_ARMED flag correctly.  When this flag is set, the
  energy source of an NVDIMM is not armed and any new writes to the DIMM
  may not be preserved.

  However, Bob Moore warned me that it is important to get these things
  named correctly wherever they appear otherwise we run the risk of a
  less than cautious firmware engineer implementing the polarity the
  wrong way.  Once a mistake like that escapes into production platforms
  the flag becomes useless and we need to move to a new bit position.

  Bob has agreed to take a change through ACPICA to rename
  ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below
  from Toshi brings the sysfs representation of these flags in line with
  their respective polarities.

  Please pull for 4.2 as this is the first kernel to expose the ACPI
  NFIT sysfs representation, and this is likely a kernel that firmware
  developers will be using for checking out their NVDIMM enabling"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: Clarify memory device state flags strings

Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown")
fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not
resetting the association overall_error_count.  This allowed the association
to better enforce assoc.max_retrans limit.

However, the same issue still exists when the association is in SHUTDOWN_RECEIVED
state.  In this state, HB-ACKs will continue to reset the overall_error_count
for the association would extend the lifetime of association unnecessarily.

This patch solves this by resetting the overall_error_count whenever the current
state is small then SCTP_STATE_SHUTDOWN_PENDING.  As a small side-effect, we
end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT
states, but they are not really impacted because we disable Heartbeats in those
states.

Fixes: Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in sctp_process_asconf(), we get address parameter from the beginning of
the addip params. but we never check if it's really there. if the addr
param is not there, it still can pass sctp_verify_asconf(), then to be
handled by sctp_process_asconf(), it will not be safe.

so add a code in sctp_verify_asconf() to check the address parameter is in
the beginning, or return false to send abort.

note that this can also detect multiple address parameters, and reject it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ACPI 6.0 NFIT Memory Device State Flags in Table 5-129 defines
NVDIMM status as follows.  These bits indicate multiple info,
such as failures, pending event, and capability.

  Bit [0] set to 1 to indicate that the previous SAVE to the
  Memory Device failed.
  Bit [1] set to 1 to indicate that the last RESTORE from the
  Memory Device failed.
  Bit [2] set to 1 to indicate that platform flush of data to
  Memory Device failed. As a result, the restored data content
  may be inconsistent even if SAVE and RESTORE do not indicate
  failure.
  Bit [3] set to 1 to indicate that the Memory Device is observed
  to be not armed prior to OSPM hand off. A Memory Device is
  considered armed if it is able to accept persistent writes.
  Bit [4] set to 1 to indicate that the Memory Device observed
  SMART and health events prior to OSPM handoff.

/sys/bus/nd/devices/nmemX/nfit/flags shows this flags info.
The output strings associated with the bits are "save", "restore",
"smart", etc., which can be confusing as they may be interpreted
as positive status, i.e. save succeeded.

Change also the dev_info() message in acpi_nfit_register_dimms()
to be consistent with the sysfs flags strings.
Reported-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[ross: rename 'not_arm' to 'not_armed']
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
[djbw: defer adding bit5, HEALTH_ENABLED, for now]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Some of the stats handling code differs based on SR-IOV support,
and SRIOV support is only available if full-featured firmware is
used.
Do not use vadaptor stats if firmware mode is not set to
full-featured.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fixed link values parsed from the device tree are stored in
the struct fixed_phy member status. The struct phy_device members
speed, duplex were not updated.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull amr64 kvm fix from Will Deacon:
 "We've uncovered a nasty bug in the arm64 KVM code which allows a badly
  behaved 32-bit guest to bring down the host.  The fix is simple (it's
  what I believe we call a "brown paper bag" bug) and I don't think it
  makes sense to sit on this, particularly as Russell ended up
  triggering this rather than just somebody noticing a potential problem
  by inspection.

  Usually arm64 KVM changes would go via Paolo's tree, but he's on
  holiday at the moment and the deal is that anything urgent gets
  shuffled via the arch trees, so here it is.

  Summary:

  Fix arm64 KVM issue when injecting an abort into a 32-bit guest, which
  would lead to an illegal exception return at EL2 and a subsequent host
  crash"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: KVM: Fix host crash when injecting a fault into a 32bit guest

When injecting a fault into a misbehaving 32bit guest, it seems
rather idiotic to also inject a 64bit fault that is only going
to corrupt the guest state. This leads to a situation where we
perform an illegal exception return at EL2 causing the host
to crash instead of killing the guest.

Just fix the stupid bug that has been there from day 1.

Cc: <stable@vger.kernel.org>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull block fixes from Jens Axboe:
 "Two fixes in this pull request:

   - The writeback regression fix from Tejun, which has been weeks in
     the making.  This fixes a case where we would sometimes not issue
     writeback when we should have.

   - An older fix for a memory corruption issue in mtip32xx.  It was
     deferred since we wanted a better fix for this (driver should not
     have to handle that case), but given the timing, it's better to put
     the simple fix in for 4.2 release"

* 'for-linus' of git://git.kernel.dk/linux-block:
  mtip32x: fix regression introduced by blk-mq per-hctx flush
  writeback: sync_inodes_sb() must write out I_DIRTY_TIME inodes and always call wait_sb_inodes()

The Crucial M500 is known to have issues with queued TRIM commands, the
factory recertified SSDs use a different model number naming convention
which causes them to get ignored by the blacklist.

The new naming convention boils down to: s/Crucial_/FC/
Signed-off-by: Guillermo A. Amaral <g@maral.me>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

Since commit 1851617c ("PCI/MSI: Disable MSI at enumeration even if
kernel doesn't support MSI"), the setup of dev->msi_cap/msix_cap and the
disable of MSI/MSI-X interrupts isn't being done at PCI probe time, as
the logic responsible for this was moved in the aforementioned commit
from pci_device_add() to pci_setup_device(). The latter function is not
reachable on PowerPC pseries platform during Open Firmware PCI probing
time.

This exhibits as drivers not being able to enable MSI, eg:

  bnx2x 0000:01:00.0: no msix capability found

This patch calls pci_msi_setup_pci_dev() explicitly to disable MSI/MSI-X
during PCI probe time on pSeries platform.

Fixes: 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI")
[mpe: Flesh out change log and clarify comment]
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel
doesn't support MSI") changed the location of the code that initialises
dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI
probe time in devices that have this flag set. It moved the code from
pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(),
called by pci_setup_device().

The pseries PCI probing code does not call pci_setup_device(), so since
the aforementioned commit the function pci_msi_setup_pci_dev() is not
called and MSI/MSI-X interrupts are left enabled. Additionally because
dev->msi_cap/msix_cap are not initialised no driver can ever enable
MSI/MSI-X.

To fix this, the pseries PCI probe should manually call
pci_msi_setup_pci_dev(), so this patch makes it non-static.

Fixes: 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI")
[mpe: Update change log to mention dev->msi_cap/msix_cap]
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in
usbnet_stop(), but its value should be read before it is cleared
when dev->flags is set to 0.

The problem was spotted and the fix was provided by
Oliver Neukum <oneukum@suse.de>.
Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull LSM regression fix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LSM: restore certain default error codes

Pull nvdimm fix from Dan Williams:
 "A single fix for status register read size in the nd_blk driver.

  The effect of getting the width of this register read wrong is that
  all I/O fails when the read returns non-zero.  Given the availability
  of ACPI 6 NFIT enabled platforms, this could reasonably wait to come
  in during the 4.3 merge window with a tag for 4.2-stable.  Otherwise,
  this makes the 4.2 kernel fully functional with devices that conform
  to the mmio-block-apertures defined in the ACPI 6 NFIT (NVDIMM
  Firmware Interface Table)"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit, nd_blk: BLK status register is only 32 bits

[ 1065.801569] Internal error: Oops: 96000006 [#1] SMP
...
[ 1065.866655] Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Apr 22 2015
[ 1065.873937] Workqueue: events_power_efficient phy_state_machine
[ 1065.879837] task: fffffe01de105e80 ti: fffffe00bcf18000 task.ti: fffffe00bcf18000
[ 1065.887288] PC is at linkwatch_fire_event+0xac/0xc0
[ 1065.892141] LR is at linkwatch_fire_event+0xa0/0xc0
[ 1065.896995] pc : [<fffffe000060284c>] lr : [<fffffe0000602840>] pstate: 200001c5
[ 1065.904356] sp : fffffe00bcf1bd00
...
[ 1066.196813] Call Trace:
[ 1066.199248] [<fffffe000060284c>] linkwatch_fire_event+0xac/0xc0
[ 1066.205140] [<fffffe000061167c>] netif_carrier_off+0x54/0x64
[ 1066.210773] [<fffffe00004f1654>] phy_state_machine+0x120/0x3bc
[ 1066.216578] [<fffffe00000d8d10>] process_one_work+0x15c/0x3a8
[ 1066.222296] [<fffffe00000d9090>] worker_thread+0x134/0x470
[ 1066.227757] [<fffffe00000df014>] kthread+0xe0/0xf8
[ 1066.232525] Code: 97f65ee9 f9420660 d538d082 8b000042 (885f7c40)

The fix is to call phy_disconnect() from xgene_enet_mdio_remove,
which in turn call cancel_delayed_work_sync().
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 1e052be6 ("net_sched: destroy proto tp when all filters are gone")
I added a check in u32_destroy() to see if all real filters are gone
for each tp, however, that is only done for root_ht, same is needed
for others.

This can be reproduced by the following tc commands:

tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256
tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32
ht 15:2: match ip src 10.0.0.2 flowid 1:10
tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32
ht 15:2: match ip src 10.0.0.3 flowid 1:10

Fixes: 1e052be6 ("net_sched: destroy proto tp when all filters are gone")
Reported-by: Akshat Kakkar <akshat.1984@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While in most cases commit b1d9e6b0 ("LSM: Switch to lists of hooks")
retained previous error returns, in three cases it altered them without
any explanation in the commit message. Restore all of them - in the
security_old_inode_init_security() case this led to reiserfs using
uninitialized data, sooner or later crashing the system (the only other
user of this function - ocfs2 - was unaffected afaict, since it passes
pre-initialized structures).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Only read 32 bits for the BLK status register in read_blk_stat().

The format and size of this register is defined in the
"NVDIMM Driver Writer's guide":

http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdfSigned-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Rather than re-initialising the entire completion on every mdio access,
use reinit_completion() which only resets the completion count.  This
avoids possible reinitialisation of the contained spinlock and waitqueue
while they may be in use (eg, mid-completion.)

Such an event could occur if there's a long delay in interrupt handling
causing the mdio accessor to time out, then a second access comes in
while the interrupt handler on a different CPU has called complete().
Another scenario where this has been observed is while locking has
been missing at the phy layer, allowing concurrent attempts to access
the MDIO bus.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The phy layer is missing locking for the above two functions - it
has been observed that two threads (userspace and the phy worker
thread) can race, entering the bus ->write or ->read functions
simultaneously.

This causes the FEC driver to initialise a completion while another
thread is waiting on it or while the interrupt is calling complete()
on it, which causes spinlock unlock-without-lock, spinlock lockups,
and completion timeouts.

Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers.")
Fixes: 0c1d77df ("net: libphy: Add phy specific function to access mmd phy registers")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before 56ef9c90[1] it used to ignore all errors from igmp_join().
That commit enhanced that and made it error out whatever error happened
with igmp_join(), but that's not good because when using multicast
groups vxlan will try to join it multiple times if the socket is reused
and then the 2nd and further attempts will fail with EADDRINUSE.

As we don't track to which groups the socket is already subscribed, it's
okay to just ignore that error.

Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope")
Reported-by: John Nielsen <lists@jnielsen.net>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.2-20150825' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
this is the updated pull request of one patch by me for the peak_usb
driver. It fixes the driver, so that non FD adapters don't provide CAN
FD bittimings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>